| OID symbolic | OID numeric | Type | Access | Description |
|---|
| brcdRouteMapMIB | 1.3.6.1.4.1.1991.1.1.3.39.1 | | | This MIB module contains the managed object definitions for
routemaps within the IP Routers.
Copyright 1996-2011 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information
Base Specification embodies Brocade Communications Systems'
confidential and proprietary intellectual property.
Brocade Communications Systems retains all title and ownership
in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications
Systems makes no warranty, either express or implied, as to the
use, operation, condition, or performance of the specification,
and any unintended consequence it may on the user environment. |
| brcdRouteMapConfig | 1.3.6.1.4.1.1991.1.1.3.39.1.1 | | | |
| brcdRouteMapTable | 1.3.6.1.4.1.1991.1.1.3.39.1.1.1 | | not-accessible | This table contains the routemap entries. |
| brcdRouteMapEntry | 1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1 | | not-accessible | A row in this table represents a routemap entry. |
| STR brcdRouteMapName | 1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1.1 | DisplayString | not-accessible | Identifies the route map.
In NetIron, the name can have max 80 characters. |
| U32 brcdRouteMapSequence | 1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1.2 | Unsigned32 | not-accessible | Identifies the sequence to insert to/delete from existing route-map entry. |
| ACT brcdRouteMapAction | 1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1.3 | Action | read-create | Identifies the action to be taken for this Route Map entry. |
| STR brcdRouteMapRuleName | 1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1.4 | DisplayString | read-create | Identifies the path name for this map. Max size is 127.
This object is not supported in CES/CER platform. |
| ROW brcdRouteMapRowStatus | 1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1.5 | RowStatus | read-create | Setting this object to createAndGo(4) results in addition
of new row. Setting this object to destroy( 6)results in
removal of a row. The value active(1) is returned for
get and get-next requests.
Other values in the enumeration are not used. |
| brcdRouteMapMatchTable | 1.3.6.1.4.1.1991.1.1.3.39.1.1.2 | | not-accessible | RouteMap Match Clause Config Table for a given routemap. |
| brcdRouteMapMatchEntry | 1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1 | | not-accessible | A row in this table represents a routemap match clause entry.
Before creating an instance row in this table using a name, a
corresponding entry with that name needs to be existing in the
brcdRouteMapTable. |
| I32 brcdRouteMapMatchSequence | 1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1.1 | Integer32 | not-accessible | This object identifies the position in this table where this
match rule is added. This is running integer.
If the brcdRouteMapMatchRowStatus is createAndGo then the row
is inserted if there is no match rule is present at
brcdRouteMapMatchIndex position.
If there is a rule present it should be of same kind.
If not then the set request fails.
Application can obtain value for this object in the last row
and use the next value to insert a new row in this table. |
| INT brcdRouteMapMatchType | 1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1.2 | INTEGER | not-accessible | A pair of brcdRouteMapMatchType and brcdRouteMapMatchValue
objects specifies a particular match clause. |
| STR brcdRouteMapMatchValue | 1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1.3 | DisplayString | read-create | This object specifies the value corresponding to the
brcdRouteMapMatchType.
matchAsPath - Identifies one or more BGP AS Paths to be matched.
This list of AS Path names are separated by one or more spaces.
matchBgpCommunityName ֠Identifies one or more BGP community ACL names to
be matched. This list of BGP community ACL names separated by one or more
spaces.
matchBgpCommunityNameExact ֠Identifies one or more BGP community ACL names
to be matched (which requires exact match).
This list of BGP community ACL names separated by one or more spaces.
matchBgpExtCommunityNumber ֠ Identifies one or more BGP community list
numbers to be matched. This is list of BGP community list numbers
separated by one or more spaces.
matchInterfaces ֠Identifies the list of IfIndices that need to be matched
in this Routemap. It means traffic from these interfaces will satisfy this
match. Value 0 matches to null0 interface.
In NetIron, supported interfaces are ethernet, pos, ve, loopback and tunnel.
Each IfIndex is a 32-bit integer in big endian order.
One or more Interface IfIndices can be specified by separating each
IfIndex by one or more spaces.
matchIpv4AddressAclNames ֠Matches Ipv4 address of route.
Identifies the list of Ipv4 standard or extended ACL names to be matched.
The value is list of ACL names separated by one or more spaces.
matchIpv4AddressAclNumbers ֠Matches Ipv4 address of route.
Identifies the list of Ipv4 ACL numbers to be matched.
The value is list of ACL numbers separated by one or more spaces.
matchIpv4AddressPrefixList ֠Matches Ipv4 address of route. Identifies
the list of Ipv4 prefix-lists to be matched.
The value is list of IPv4 prefix-list names separated by one or more spaces.
matchIpv4NextHopAclNames ֠Matches next hop Ipv4 address of route.
Identifies the list of Ipv4 standard or extended ACL names to be matched.
The value is list of ACL names separated by one or more spaces.
matchIpv4NextHopAclNumbers ֠ Matches next hop Ipv4 address of route.
Identifies the list of Ipv4 ACL numbers to be matched.
The value is list of ACL numbers separated by one or more spaces.
matchIpv4NextHopPrefixList ֠Matches next hop Ipv4 address of route.
Identifies the list of Ipv4 prefix-lists to be matched.
The value is list of IPv4 prefix-list names separated by one or more spaces.
matchIpv4RouteSourceAclNames ֠Matches advertising source Ipv4 address of
route.Identifies the list of Ipv4 standard or extended ACL names to be matched.
The value is list of ACL names separated by one or more spaces.
matchIpv4RouteSourceAclNumbers ֠ Matches advertising source Ipv4
address of route.Identifies the list of Ipv4 ACL numbers to be matched.
The value is list of ACL numbers separated by one or more spaces.
matchIpv4RouteSourcePrefixList ֠Matches advertising source Ipv4
address of route. Identifies the list of Ipv4 prefix-lists to be matched.
The value is list of IPv4 prefix-list names separated by one or more spaces.
matchIpv6AddressAclNames ֠Matches Ipv6 address of route. Identifies
the list of Ipv6 ACL names to be matched. The value is list of ACL names
separated by one or more spaces.
matchIpv6AddressPrefixList ֠Matches Ipv6 address of route. Identifies the
list of Ipv6 prefix-lists to be matched. The value is list of IPv6 prefix-list
names separated by one or more spaces.
matchIpv6NextHopPrefixList ֠Matches next hop Ipv6 address of route.
Identifies the list of Ipv6 prefix-lists to be matched. The value is
list of IPv6 prefix-list names separated by one or more spaces.
matchIpv6RouteSourcePrefixList ֠Matches advertising source Ipv6 address
of route. Identifies the list of Ipv6 prefix-lists to be matched. The value
is list of IPv6 prefix-list names separated by one or more spaces.
matchMetric ֠Specifies the route metric to be used for the match.
Value is string representation of the decimal metric value. Agent
will do ascii to integer conversion before using this value.
matchRoutingProtocol ֠Specifies the routing protocol to be used for
the match. Value is string representation of one of the following decimal
values. static-BGP(1), iBGP(2), eBGP(3), non-staticBGP(4), isisLevel1(5), isisLevel2(6),
isis(7),rip(8),static(9). The other values are not supported. The agent will do ascii to
integer conversion before using this value.
matchRouteType ֠Specifies the route type to be used for the match.
Value is string representation of one of the following decimal values.
ospfExternalType1(2), ospfExternalType2(3), ospfInternal(4), isisLevel1(5),
isisLevel2(6). The other values are not supported. The agent will do ascii
to integer conversion before using this value.
matchTags ֠Specifies list of tag values to be matched (string
representation of decimal values) Each tag value is separated by one
or more spaces. There cannot be more than 16 values. |
| STR brcdRouteMapMatchCliString | 1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1.4 | DisplayString | read-only | This is read-only object. This object is for informative purpose only.
For a pair of brcdRouteMapMatchType and brcdRouteMapMatchValue, this object
represents equivalent CLI routemap match command. |
| ROW brcdRouteMapMatchRowStatus | 1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1.5 | RowStatus | read-create | Setting this object to createAndGo(4) results in addition of new row.
Setting this object to destroy( 6)results in removal of a row.
The value active(1) is returned for get and get-next requests.
Other values in the enumeration are not used. |
| brcdRouteMapSetTable | 1.3.6.1.4.1.1991.1.1.3.39.1.1.3 | | not-accessible | RouteMap Set Clause Config Table for a given routemap. |
| brcdRouteMapSetEntry | 1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1 | | not-accessible | A row in this table represents a routemap set clause entry.
Before creating an instance row in this table using a name, a
corresponding entry with that name needs to be existing in the
brcdRouteMapTable. |
| I32 brcdRouteMapSetSequence | 1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1.1 | Integer32 | not-accessible | This object identifies the position in this table where this
match rule is added. This is running integer. If the
brcdRouteMapSetRowStatus is createAndGo then the row is inserted
if there is no match rule is present at brcdRouteMapSetIndex
position. If there is a rule present it should be of same kind.
If not then the set request fails. Application can obtain value
for this object in the last row and use the next value to insert
a new row in this table. |
| INT brcdRouteMapSetType | 1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1.2 | INTEGER | not-accessible | A pair of brcdRouteMapSetType and brcdRouteMapSetValue objects
specifies a particular set clause. |
| STR brcdRouteMapSetValue | 1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1.3 | DisplayString | read-create | This object specifies the value corresponding to the
brcdRouteMapSetType.
setAsPath ֠Identifies the prepend string for BGP AS path attribute.
The value is the string representation of BGP AS number to be
prepended with the AS Path.
If the value specified is the string ҴagҠinstead of the AS path
number then itwill set the tag as an AS path attribute.
setAutomaticTag ֠Specifies that the routemap tag is to be computed
automatically. Value is string representation of a truth value 1.
This object will not be present if it is not configured. Truth value
of 0 can be used to mark its deletion.
setDeleteCommunityList ֠Specifies the name of the BGP community
List to be set for deletion.
setCommunityNumber ֠Specifies the BGP community number to be added.
Format is either ӁA:NNҠor ''.
setCommunityFlag ֠This value relates to setCommunityNumber. It
specifies that the BGP community in setCommunityNumber have the
following behavior noExport(1),noAdvertise(2), localAs(3),additive(4).
The value is string representation of one of the above decimal values.
For additive(4), the value is followed by the community number in either
'AA:NN' or format.
setDampening ֠It consists of four values separated by space.
The first value specifies the string representation of decimal value
for BGP route flap dampening. It should be enabled with half-time in
minutes for the penalty. Default value is 15 minutes. Valid range is
1-45.
The second value relates to the 1st value and specifies the string
representation of the value to start reusing a BGP route. Default is
750, with each flap penalty as 1000. Valid range is 1-20000.
The third value relates to the 1st value and specifies the string
representation of value to start suppressing a BGP route. Default
is 2000, with each flap penalty as 1000. Valid range is 1-20000.
The Fourth value relates to the 1st value and specifies the string
representation of maximum duration in minutes to suppress a stable
route. Default is 40. Valid range is 1-255.
If a value is not provided then the default value will be picked up.
setDistance ֠Specifies the string representation of admin distance to
be set for matching OSPF routes.
setExtCommunityRT ֠Specifies one or more (separated by space) VPN
extended community attributes. Each VPN community is of format ҁSN:nnҮ
setExtCommunityRTAdditive ֠This object is related to earlier object
setExtCommunityRT. It specifies that the VPN communities in earlier
should be added to the existing extended community.
setExtCommunitySOO ֠Specifies site-of-origin VPN extended community attributes. The VPN community is
of format ҁSN:nnҮ
setOutputInterfaces ֠Identifies the list of output IfIndices.
Value 0 matches to null0 interface. Each IfIndex is a 32-bit integer in
big endian order. One or more Interface IfIndices can be specified by
separating each IfIndex by one or more spaces. If the ifIndex is not
null0 then the preserve-vlan flag is mandatory and which is always
implicitly set.
setNextHopIpv4Addr ֠Identifies the string representation of the next
hop ipv4 address without preserve vlan flag.
setNextHopIpv4AddrWithPreserveVlan ֠Identifies the string
representation of the next hop ipv4 address with preserve vlan flag.
setNextHopIpv6Addr ֠Identifies the string representation of the next
hop ipv6 address without preserve vlan flag.
setNextHopIpv6AddrWithPreserveVlan ֠Identifies the string representation
of the next hop ipv6 address with preserve vlan flag.
setNextHopIpPeerAddr ֠The value is string representation of truth value.
Identifies that the next hop is BGP IPv4 peer address. When set to Ѱҍ
this object is deleted.
setIsisLevel ֠Identifies the level to which the ISIS route to import.
The value is string representation of one of the following decimal values,
level1(1), level2(2) level1or2(3).
setLocalPreference ֠Identifies the BGP local preference path attribute
value to be set. The value is string representation of the decimal
preference value.
setMetricType ֠Specifies the route metric type for the destination
routing protocol. Value is string representation of one of the
following internal(1), external(2), type1(3), type2(4).
setMetric ֠Specifies the metric value set for the destination routing
protocol. Value is string representation of the following:
: Metric value
+: Add to metric
-: Subtract to metric
None: remove metric value
setNextHopFloodVlan ֠Specifies the next hop vlan without preserve vlan
to be set. Value is string representation of vlan Id (1-4090)
setNextHopFloodVlanPreserveVlan ֠Specifies the next hop vlan with preserve
vlan to be set. Value is string representation of vlan Id (1-4090)
setNextHopFloodVlanOutgoingDa ֠Specifies the next hop vlan with outgoing
destination address flag set. Value is string representation of vlan id (1-4090)
followed with MAC address.
setNextHopIpTunnel ֠ Specifies the next hop IP tunnel, it can only be
configured for configured GRE tunnels. The value is string representation
of decimal tunnel ID
setNextHopLsp ֠Specifies the next hop LSP name.
setBgpOrigin ֠Specifies the BGP origin code. The value is string
representation of one the following decimal value, igp(1), incomplete(2)
setTag ֠Specifies the string representation of the decimal tag value
for the destination routing protocol.
setWeight ֠Specifies the string representation of the decimal value for
BGP weight for the routing table. |
| STR brcdRouteMapSetCliString | 1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1.4 | DisplayString | read-only | This is read-only object. This object is for informative purpose only.
For a pair of brcdRouteMapSetType and brcdRouteMapSetValue, this object
represents equivalent CLI routemap set command. |
| ROW brcdRouteMapSetRowStatus | 1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1.5 | RowStatus | read-create | Setting this object to createAndGo(4) results in addition of new row.
Setting this object to destroy( 6)results in removal of a row. The
value active(1) is returned for get and get-next requests. Other
values in the enumeration are not used. |
| brcdRouteMapBindTable | 1.3.6.1.4.1.1991.1.1.3.39.1.1.4 | | not-accessible | This table contains the bindings for routemap entries to interfaces.
Only one route map can be bounded to a given interface. Attempting
to bind a second routemap to the same interface will return an error. |
| brcdRouteMapBindEntry | 1.3.6.1.4.1.1991.1.1.3.39.1.1.4.1 | | not-accessible | A row in this table represents a binding of a routemap to one interface. |
| NUM brcdRouteMapBindIfIndex | 1.3.6.1.4.1.1991.1.1.3.39.1.1.4.1.1 | InterfaceIndex | not-accessible | Identifies the interface to bind a routemap.
The interface can only be of type physical or virtual. |
| IPt brcdRouteMapBindIpType | 1.3.6.1.4.1.1991.1.1.3.39.1.1.4.1.2 | InetAddressType | not-accessible | Identifies the IP type for the bind. Route map can be
bound only to ipv4 or ipv6 policy. |
| STR brcdRouteMapBindMapName | 1.3.6.1.4.1.1991.1.1.3.39.1.1.4.1.3 | DisplayString | read-create | Identifies the route map name.
In NetIron, the name can have max 80 characters. |
| ROW brcdRouteMapBindRowStatus | 1.3.6.1.4.1.1991.1.1.3.39.1.1.4.1.4 | RowStatus | read-create | Setting this object to createAndGo(4) results in addition
of new row. Setting this object to destroy( 6)results in
removal of a row. The value active(1) is returned for
get and get-next requests.
Other values in the enumeration are not used. Once created,
a row cannot be modified |
| brcdRouteMapShow | 1.3.6.1.4.1.1991.1.1.3.39.1.2 | | | |
| brcdRMapRuleDisplayTable | 1.3.6.1.4.1.1991.1.1.3.39.1.2.1 | | not-accessible | This table contains the various route map rule entries.
A routemap rule instance (map and sequence number) can
have only one rule name. The same rule name could be
applied to multiple routemaps |
| brcdRMapRuleDisplayEntry | 1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1 | | not-accessible | A row in this table represents a route map rule entry. |
| STR brcdRMapRuleDisplayRuleName | 1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.1 | DisplayString | not-accessible | Identifies the rule name. |
| STR brcdRMapRuleDisplayRouteMapName | 1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.2 | DisplayString | not-accessible | Identifies the route map that has this rule. |
| U32 brcdRMapRuleDisplaySequence | 1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.3 | Unsigned32 | not-accessible | Identifies the instance sequence number. |
| IPt brcdRMapRuleDisplayIpType | 1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.4 | InetAddressType | not-accessible | Identifies the IP type for the Rule Display (1(ipv4), or 2(ipv6)).
A row is present if the corresponding ipv4 or ipv6 AclMatchFilter
is present. |
| STR brcdRMapRuleDisplayInputInterfaceList | 1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.5 | DisplayString | read-only | A list of space separated interface indices which are the
port membership of this rule. An * here means the path is
configured but disabled. |
| STR brcdRMapRuleDisplayAclMatchFilter | 1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.6 | DisplayString | read-only | The list of space separated ACL match filters name or number used
in this rule. |
| STR brcdRMapRuleDisplayOutputVlan | 1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.7 | DisplayString | read-only | Identifies the next-hop-flood VLAN selected (by the interface
card). Empty string will be returned if there is no value. |
| STR brcdRMapRuleDisplayOutputPort | 1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.8 | DisplayString | read-only | A list of space separated egress interfaces selected (by the interface card).
Empty string will be returned if there is no value. |
| STR brcdRMapRuleDisplayOutputIPAddress | 1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.9 | DisplayString | read-only | A list of space separated selected IPv4 next-hop or
IPv6 next-hop address.Empty string will be returned if there is no value. |
