FOUNDRY-SN-WIRELESS-GROUP-MIB

All MIBs › FOUNDRY-SN-WIRELESS-GROUP-MIB

Organization: Brocade Communications Systems, Inc.

Last Updated: 2010-06-02

Category: Technology: Wireless, Vendor: Foundry/Brocade

Description: Brocade Foundry wireless group MIB providing access point, SSID, and wireless client management objects for FastIron wireless LAN deployments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FOUNDRY-SN-WIRELESS-GROUP-MIB?

FOUNDRY-SN-WIRELESS-GROUP-MIB is a Brocade/Foundry proprietary MIB for managing wireless LAN mobility groups, access point interfaces, and roaming behavior on FastIron-based wireless controller deployments. It exposes per-interface wireless configuration (wireless enable, auto-provisioning/PnP learning of new APs, VPN policy tunnel associations) and a roaming-peer table describing mobility relationships between controllers. Its monitoring focus is software/configuration status of the wireless control plane rather than radio-level counters: an operator can check whether an interface has wireless enabled, whether auto-port-disable or full compatible roaming is active, and whether new access points are being auto-learned, which reveals misprovisioned or unauthorized APs. It has an implicit dependency on VPN policy-table objects (wgIfVpnPTPolicyId, wgVpnPTDeletePolicy) shared with Foundry's VPN/tunnel MIBs. It is deployed in enterprise wireless deployments built around Brocade/Foundry FastIron wireless controllers managing groups of access points. Network engineers evaluating or troubleshooting this functionality can download the FOUNDRY-SN-WIRELESS-GROUP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FOUNDRY-SN-WIRELESS-GROUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Brocade/Foundry FastIron wireless LAN controller

Monitoring Examples

An admin would walk wgIfTable/wgIfEntry to check wgIfWirelessEnable per interface and confirm wgIfPnPLearnNewAP is set as intended, since an unexpectedly enabled auto-learn setting could let a rogue AP join the mobility group. wgRoamingPeerTable/wgRoamingPeerEntry would be polled to verify which peer controllers participate in roaming for a given wgMobilityId, revealing a peer that has dropped out of the mobility group. wgIfVpnPTPolicyId and wgIfFullCompRoamingEnable show which VPN tunneling policy and roaming-compatibility mode apply to each wireless interface.

What Can Be Monitored

per-interface wireless enable state
AP auto-provisioning/learning setting
roaming peer membership
mobility group ID
VPN tunnel policy association
auto port disable state

Imported Objects

From FOUNDRY-SN-AGENT-MIB

MacAddress

From FOUNDRY-SN-SWITCH-GROUP-MIB

snSwitch

MODULE-IDENTITY

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
snWireless	1.3.6.1.4.1.1991.1.1.3.23			Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
wgGroup	1.3.6.1.4.1.1991.1.1.3.23.1
I32 wgMobilityId	1.3.6.1.4.1.1991.1.1.3.23.1.1	Integer32	read-write	Unique Identifier used to specify the mobility doamin. Valid range is . Use to remove the domain.
I32 wgVpnPTDeletePolicy	1.3.6.1.4.1.1991.1.1.3.23.1.2	Integer32	read-write	Write a valid VPN pass through policy ID to remove the policy. Return zero when reading this object.
wgIfTable	1.3.6.1.4.1.1991.1.1.3.23.2		not-accessible	WiFi Interface Table.
wgIfEntry	1.3.6.1.4.1.1991.1.1.3.23.2.1		not-accessible	An entry of the WiFi Interface Table.
I32 wgIfIndex	1.3.6.1.4.1.1991.1.1.3.23.2.1.1	Integer32	read-only	ifIndex value of the switch interface.
INT wgIfWirelessEnable	1.3.6.1.4.1.1991.1.1.3.23.2.1.2	INTEGER	read-write	Control wireless function of the switch interface.
INT wgIfPnPLearnNewAP	1.3.6.1.4.1.1991.1.1.3.23.2.1.3	INTEGER	read-write	Control the interface to learn new AP.
INT wgIfAutoPortDisable	1.3.6.1.4.1.1991.1.1.3.23.2.1.4	INTEGER	read-write	Disable the interface if the interface link status change.
I32 wgIfVpnPTPolicyId	1.3.6.1.4.1.1991.1.1.3.23.2.1.5	Integer32	read-write	To bind an interface to a VPN pass through policy, write a valid policy number which is larger than zero. To unbind an interface to a VPN pass through policy, write a zero.
INT wgIfFullCompRoamingEnable	1.3.6.1.4.1.1991.1.1.3.23.2.1.6	INTEGER	read-write	Control full compatibility roaming of an interface.
wgRoamingPeerTable	1.3.6.1.4.1.1991.1.1.3.23.3		not-accessible	Roaming Peer table contains information of peers.
wgRoamingPeerEntry	1.3.6.1.4.1.1991.1.1.3.23.3.1		not-accessible	An entry of the roaming peer table.
IP wgRoamingPeerIpAddress	1.3.6.1.4.1.1991.1.1.3.23.3.1.1	IpAddress	read-only	IP Address of the ISRP peer.
INT wgRoamingPeerConnectionStatus	1.3.6.1.4.1.1991.1.1.3.23.3.1.2	INTEGER	read-only	Shows the state of the ISRP Connection.
INT wgRoamingPeerRowStatus	1.3.6.1.4.1.1991.1.1.3.23.3.1.3	INTEGER	read-write	Shows the state of the row in the PeerRow Table.
wgPnPTable	1.3.6.1.4.1.1991.1.1.3.23.4		not-accessible	AP Plug and Play Table.
wgPnPEntry	1.3.6.1.4.1.1991.1.1.3.23.4.1		not-accessible	An entry of the AP Plug and Play Table.
I32 wgPnPIfIndex	1.3.6.1.4.1.1991.1.1.3.23.4.1.1	Integer32	read-only	ifIndex value of the switch interface.
MAC wgPnPMacAddress	1.3.6.1.4.1.1991.1.1.3.23.4.1.2	MacAddress	read-only	MAC address of the attached AP.
IP wgPnPIpAddress	1.3.6.1.4.1.1991.1.1.3.23.4.1.3	IpAddress	read-write	IP address of the attached AP.
IP wgPnPIpMask	1.3.6.1.4.1.1991.1.1.3.23.4.1.4	IpAddress	read-write	Subnet mask of the attached AP.
IP wgPnPIpDefaultGw	1.3.6.1.4.1.1991.1.1.3.23.4.1.5	IpAddress	read-write	Default gateway of the attached AP.
INT wgPnPStatus	1.3.6.1.4.1.1991.1.1.3.23.4.1.6	INTEGER	read-only	AP device status. If the switch diecovered a new AP which had not been configured, the 'discovered' state will return. If the AP's IP address, subnet mask and default gateway were configured to the switch port but the AP with the matching MAC address had not attached to the switch port, 'configured' state will return. If the AP's IP address, subnet mask and default gateway were configured to the switch port and the AP with the matching MAC address had attached to the switch port and was operating, 'operational' state will return.
INT wgPnPRowStatus	1.3.6.1.4.1.1991.1.1.3.23.4.1.7	INTEGER	read-write	Create, delete or modify a row of AP Plug and Play Table.
wgVpnPTServerTable	1.3.6.1.4.1.1991.1.1.3.23.5		not-accessible	VPN pass through server table
wgVpnPTServerEntry	1.3.6.1.4.1.1991.1.1.3.23.5.1		not-accessible	An entry of the VPN pass through server table.
I32 wgVpnPTServerPolicyId	1.3.6.1.4.1.1991.1.1.3.23.5.1.1	Integer32	read-only	VPN pass through policy identifier. It must be greater than zero.
IP wgVpnPTServerIpAddress	1.3.6.1.4.1.1991.1.1.3.23.5.1.2	IpAddress	read-only	VPN server IP address.
INT wgVpnPTServerRowStatus	1.3.6.1.4.1.1991.1.1.3.23.5.1.3	INTEGER	read-write	Create or delete a row of VPN pass through server table.
wgVpnPTFilterTable	1.3.6.1.4.1.1991.1.1.3.23.6		not-accessible	VPN pass through filter table
wgVpnPTFilterEntry	1.3.6.1.4.1.1991.1.1.3.23.6.1		not-accessible	An entry of the VPN pass through filter table.
I32 wgVpnPTFilterPolicyId	1.3.6.1.4.1.1991.1.1.3.23.6.1.1	Integer32	read-only	VPN pass through policy identifier. It must be greater than zero.
INT wgVpnPTFilterProtocol	1.3.6.1.4.1.1991.1.1.3.23.6.1.2	INTEGER	read-only	Allow this type of protocol to pass through.
I32 wgVpnPTFilterPort	1.3.6.1.4.1.1991.1.1.3.23.6.1.3	Integer32	read-only	Allow this protocol port to pass through.
INT wgVpnPTFilterRowStatus	1.3.6.1.4.1.1991.1.1.3.23.6.1.4	INTEGER	read-write	Create or delete a row of VPN pass through filter table.
wgVpnPTPolicyTable	1.3.6.1.4.1.1991.1.1.3.23.7		not-accessible	VPN pass through policy table
wgVpnPTPolicyEntry	1.3.6.1.4.1.1991.1.1.3.23.7.1		not-accessible	An entry of the VPN pass through policy table.
I32 wgVpnPTPolicyId	1.3.6.1.4.1.1991.1.1.3.23.7.1.1	Integer32	read-only	VPN pass through policy identifier. It must be greater than zero.
IFI wgVpnPTPolicyPortList	1.3.6.1.4.1.1991.1.1.3.23.7.1.2	IfIndexList	read-only	A list of ports bound to this VPN pass through policy.

RFC description

Foundry wireless network management for mobility domains and VPN tunnel configuration.

Start monitoring Brocade/Foundry FastIron wireless LAN controller with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FOUNDRY-SN-WIRELESS-GROUP-MIB

What Is FOUNDRY-SN-WIRELESS-GROUP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description