50 modules from Raisecom
Raisecom's MIBs in this database cover its carrier/access Ethernet switches and media converters, mostly under the RAISECOM- and SWITCH- prefixes, spanning carrier-Ethernet OAM and protection (RAISECOM-DOT1AG-MIB for 802.1ag CFM, RAISECOM-ELPS-MIB for G.8031 linear protection, RAISECOM-QINQ-MIB), access-layer features (DHCP snooping, GARP/GVRP/GMRP, L2CP control-frame tunneling, port security, MAC table management), a RAISECOM-PON-DEVICE-MIB for GPON/EPON OLT equipment, and a RAISECOM-NAT-MIB for NAT address mapping on Raisecom gateway/CPE devices. A recurring theme across the family is per-port fault and security status - MAC binding violations, DHCP snooping bindings, alarm history, optical transceiver DOM readings (RAISECOM-OPTICAL-MONITOR-MIB) - alongside the housekeeping modules (NTP/SNTP, syslog, SNMP agent config) common to carrier access gear. If you manage Raisecom access or aggregation switches, look here for the vendor-specific ring-protection, QinQ, and PON OLT OIDs alongside the standard IETF bridge/interface MIBs those same switches implement. The iSCOM-series module names (e.g. RAISECOM-L2CP-MIB) and the separate SWITCH-* family (MAC config, port security, trunk, SNTP) both live under Raisecom, so check which naming convention your device's MIB set actually uses before assuming a shared object model.
| Module | Description |
|---|---|
| RAISECOM-ALARM-MGMT-MIB | Manages alarm generation, acknowledgment, and history logging on Raisecom network devices. |
| RAISECOM-COMMON-MANAGEMENT-MIB | Raisecom base system management MIB covering user accounts, clock mode, SNMP notifications, and enable-log authentication for Raisecom network devices |
| RAISECOM-DHCP-CLIENT-MIB | Configures DHCP client operation and monitors lease status on Raisecom access devices. |
| RAISECOM-DHCP-OPTION-MIB | Manages DHCP option parameters for vendor-specific and custom option code configuration. |
| RAISECOM-DHCP-SNOOPING-MIB | Configures DHCP snooping to filter rogue DHCP servers on Raisecom switch ports. |
| RAISECOM-DOT1AG-MIB | Manages IEEE 802.1ag Connectivity Fault Management for Ethernet OAM on Raisecom devices. |
| RAISECOM-DOT1X-MIB | Configures IEEE 802.1X port authentication and RADIUS integration on Raisecom switches. |
| RAISECOM-ELMI-MIB | Raisecom Ethernet Local Management Interface (E-LMI/MEF 16) MIB for per-port EVC and VLAN service configuration on Raisecom Ethernet switches |
| RAISECOM-ELPS-MIB | Manages Ethernet Linear Protection Switching (G.8031) for ring and linear protection on Raisecom. |
| RAISECOM-EXTOAM-MIB | Extends Ethernet OAM with vendor-specific loopback and link monitoring for Raisecom devices. |
| RAISECOM-FANMONITOR-MIB | Monitors fan module status, speed, and failure alarms on Raisecom chassis devices. |
| RAISECOM-GARP-MIB | Configures GARP protocol timers and port participation for attribute registration. |
| RAISECOM-KEEPALIVE-MIB | Raisecom SNMP keepalive MIB that periodically sends heartbeat traps with device identity and interface details to confirm reachability of Raisecom devices |
| RAISECOM-L2CP-MIB | Manages Layer 2 Control Protocol tunneling for transparent bridging of control frames. |
| RAISECOM-LBDETECT-MIB | Raisecom loopback detection MIB for identifying Layer 2 loops per port and VLAN, reporting offending MAC addresses via traps on Raisecom switches |
| RAISECOM-LINKAGGREGATION-MIB | Configures IEEE 802.3ad link aggregation groups and LACP parameters on Raisecom switches. |
| RAISECOM-NAT-MIB | Configures Network Address Translation rules and monitors NAT session table on Raisecom devices. |
| RAISECOM-NTP-MIB | Configures NTP server associations and monitors time synchronization status on Raisecom devices. |
| RAISECOM-OAM-MIB | Raisecom 802.3ah Ethernet OAM extension MIB for link-loss traps, loopback event logging, and peer OAM entity identification on Raisecom access devices |
| RAISECOM-OPTICAL-MONITOR-MIB | Monitors optical transceiver parameters including transmit power, receive power, and temperature. |
| RAISECOM-OPTICAL-TRANSCEIVER-MIB | Raisecom optical transceiver monitoring MIB for reading SFP/SFP+ media type, optical power, and alarm thresholds on Raisecom network device interfaces |
| RAISECOM-OSPF-MIB | Extends OSPF routing configuration and link-state monitoring on Raisecom access devices. |
| RAISECOM-PAE-MIB | Manages Port Access Entity settings for 802.1X authentication on Raisecom switch ports. |
| RAISECOM-PON-DEVICE-MIB | Manages PON OLT device configuration, ONU registration, and optical line parameters. |
| RAISECOM-POWERMONITOR-MIB | Monitors power supply module status, input voltage, and failure alarms on Raisecom chassis. |
| RAISECOM-PPPOEAGENT-MIB | Raisecom PPPoE intermediate agent (PPPoE+) MIB for per-port circuit-ID string configuration and relay option enable/disable on Raisecom access switches |
| RAISECOM-QINQ-MIB | Configures IEEE 802.1ad Q-in-Q double-tagging for VLAN service tunneling on Raisecom switches. |
| RAISECOM-RELAY-MIB | Manages relay contact and dry-contact output control for environmental alarm signaling. |
| RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB | Raisecom EFM OAM remote device management MIB exposing temperature, 3.3V and 5V supply readings, and configuration objects for remotely managed Raisecom CPE |
| RAISECOM-SSH-MIB | Configures SSH server parameters for encrypted CLI management on Raisecom network devices. |
| RAISECOM-SYSLOG-SERVICE-MIB | Configures syslog service destinations and message severity filtering on Raisecom devices. |
| RAISECOM-SYSTEM-MIB | Manages system identity, software version, and operational mode on Raisecom network devices. |
| RAISECOM-UPGRADE-MANAGEMENT-MIB | Raisecom online firmware and configuration upgrade MIB managing TFTP/FTP image transfers, upload file types, and upgrade status traps on Raisecom network devices |
| RAISECOM-USER-MANAGEMENT-MIB | MIB for user authentication and access control on Raisecom network switches, supporting local, RADIUS, and TACACS+ login methods |
| RAISECOM-VLANPROTECT-MIB | Configures VLAN protection policies to restrict unauthorized VLAN access on Raisecom switches. |
| SWITCH-AUTO-CONFIGURATION-MIB | Manages Raisecom switch automatic configuration including ZTP, config download, and provisioning state. |
| SWITCH-CCP-MIB | Manages Raisecom CCP cluster protocol configuration, member switches, and commander state. |
| SWITCH-FILTER-MIB | Manages Raisecom switch traffic filter rules, classification criteria, and packet filter policy. |
| SWITCH-IFEXTEND-MIB | Manages Raisecom switch interface extension attributes beyond standard IF-MIB capabilities. |
| SWITCH-MACCONFIG-MIB | Manages Raisecom switch MAC address table configuration, static entries, and aging parameters. |
| SWITCH-MSTP-MIB | Manages Raisecom MSTP instance configuration, port roles, and multiple spanning tree topology. |
| SWITCH-PORTMIRROR-MIB | SWITCH-PORTMIRROR-MIB module |
| SWITCH-PORTSECURITY-MIB | Manages Raisecom switch port security policies, MAC-based access control, and violation actions. |
| SWITCH-PORTSTATISTIC-MIB | Tracks Raisecom switch per-port traffic statistics including byte, frame, and error counters. |
| SWITCH-RATELIMIT-MIB | SWITCH-RATELIMIT-MIB module |
| SWITCH-RMON-MIB | Manages Raisecom switch RMON statistics groups for traffic monitoring and history collection. |
| SWITCH-SNTP-MIB | Manages Raisecom switch SNTP client configuration, server addresses, and time synchronization state. |
| SWITCH-SYSTEM-MIB | Manages Raisecom switch system-level objects including identity, uptime, and operational configuration. |
| SWITCH-TRUNK-MIB | Manages Raisecom switch trunk link aggregation groups, member ports, and LAG load balancing. |
| SWITCH-VLANCFG-MIB | Manages Raisecom switch VLAN configuration parameters, port assignments, and VLAN policies. |