RAISECOM-SYSLOG-SERVICE-MIB

All MIBs › RAISECOM-SYSLOG-SERVICE-MIB

Organization: RAISECOM TECH, Ltd.

Last Updated: 2004-12-21

Category: Raisecom Networks

Description: Configures syslog service destinations and message severity filtering on Raisecom devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RAISECOM-SYSLOG-SERVICE-MIB?

RAISECOM-SYSLOG-SERVICE-MIB is a vendor-specific Raisecom module that manages the syslog service on Raisecom network devices, controlling where log messages are sent and at what severity level. It exposes configuration branches for basic logging settings, remote log server destinations, debug logging controls, and trap-related grouping for log-triggered SNMP notifications. Its role in monitoring is largely indirect: rather than reporting hardware health metrics itself, it controls the channel (syslog server, severity filters) through which software/hardware fault and status events are externally reported, so verifying raisecomLogServer configuration and raisecomLogTrapGroup settings ensures other fault conditions are actually being captured and forwarded. It has an implicit dependency on standard SNMP notification mechanisms and the SNMPv2-MIB trap infrastructure for delivering log-related traps. It is typically deployed alongside centralized syslog collectors in Raisecom-equipped access and aggregation networks, and administrators can download the RAISECOM-SYSLOG-SERVICE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RAISECOM-SYSLOG-SERVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Raisecom switch
Raisecom access/aggregation device

Monitoring Examples

An administrator would check raisecomLogServer entries to confirm the configured remote syslog destination IP and port are correct, and inspect raisecomLogBasic settings to verify the minimum severity level being forwarded. If raisecomLogTrapGroup is misconfigured, expected fault/event traps may silently stop reaching the NMS even though the underlying hardware issue is occurring. raisecomDebug settings would be checked when troubleshooting to see if verbose debug-level logging has been inadvertently left enabled, which can affect device performance.

What Can Be Monitored

syslog server destination configuration
log severity filtering level
debug logging state
log-triggered trap group settings

Imported Objects

From RAISECOM-BASE-MIB

raisecomAgent

OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

From SWITCH-TC

EnableVar

OIDs

OID symbolic	OID numeric	Type	Access	Description
raisecomSyslogService	1.3.6.1.4.1.8886.1.4			The MIB module defining objects for Syslog Service
raisecomSyslogMibObjects	1.3.6.1.4.1.8886.1.4.1
raisecomLogBasic	1.3.6.1.4.1.8886.1.4.1.1
ENA raisecomLogEnable	1.3.6.1.4.1.8886.1.4.1.1.1	EnableVar	read-write	The administration status of the syslog function is enable or disable.
INT raisecomLogRateLimit	1.3.6.1.4.1.8886.1.4.1.1.2	INTEGER	read-write	The Rate Limit for syslog.
INT raisecomLogDropMessages	1.3.6.1.4.1.8886.1.4.1.1.3	INTEGER	read-only	The number of log messages that syslog droped.
INT raisecomLogConsoleLogedMessages	1.3.6.1.4.1.8886.1.4.1.1.4	INTEGER	read-only	The number of messages that syslog loged to console.
INT raisecomLogMonitorMessages	1.3.6.1.4.1.8886.1.4.1.1.5	INTEGER	read-only	The number of messages that syslog loged to Monitor.
INT raisecomLogTimeStamp	1.3.6.1.4.1.8886.1.4.1.1.6	INTEGER	read-write	no-timestamp no time stamp date-timestamp : APR-26-2004 17:27:45 up-timestamp 17:27:45 time from start up
INT raisecomLogDebugTimeStamp	1.3.6.1.4.1.8886.1.4.1.1.7	INTEGER	read-write	no-timestamp no time stamp date-timestamp : APR-26-2004 17:27:45 up-timestamp 17:27:45 time from start up
ENA raisecomLogHistoryEnable	1.3.6.1.4.1.8886.1.4.1.1.8	EnableVar	read-write	The administration status of the syslog messages to history table is enable or disable.
INT raisecomLogHistorySize	1.3.6.1.4.1.8886.1.4.1.1.9	INTEGER	read-write	Size of the history table.
INT raisecomLogBufferSize	1.3.6.1.4.1.8886.1.4.1.1.10	INTEGER	read-write	Size of log buffer.
ENA raisecomLogSequenceNumEnable	1.3.6.1.4.1.8886.1.4.1.1.11	EnableVar	read-write	The administration status of the syslog message sequence number show is enable or disable.
INT raisecomDebugModuleLevel	1.3.6.1.4.1.8886.1.4.1.1.12	INTEGER	read-write	The debug level of syslog messages.
INT raisecomLogDebugDropMessages	1.3.6.1.4.1.8886.1.4.1.1.13	INTEGER	read-only	The number of debug messages that syslog droped.
T/F raisecomLogBufferClear	1.3.6.1.4.1.8886.1.4.1.1.14	TruthValue	read-write	This object instructs the management entity to delete the whole syslog messages in syslog buffer.
ENA raisecomLogConfig	1.3.6.1.4.1.8886.1.4.1.1.15	EnableVar	read-write	The administration status of the logging config function is enable or disable.
SYS raisecomLogConfigLevel	1.3.6.1.4.1.8886.1.4.1.1.16	SyslogSeverity	read-write	The severity of log messages which is generated from user command.
raisecomLogDestinationTable	1.3.6.1.4.1.8886.1.4.1.1.17		not-accessible	A list of destination entries.
raisecomLogDestinationEntry	1.3.6.1.4.1.8886.1.4.1.1.17.1		not-accessible	The syslog destination list group infomation entry.
INT raisecomLogDestIndex	1.3.6.1.4.1.8886.1.4.1.1.17.1.1	INTEGER	not-accessible	This object index of syslog destination entry.
ENA raisecomLogDestEnable	1.3.6.1.4.1.8886.1.4.1.1.17.1.2	EnableVar	read-write	The administration status of the syslog destination is enable or disable.
SYS raisecomLogDestServrity	1.3.6.1.4.1.8886.1.4.1.1.17.1.3	SyslogSeverity	read-write	The severity of log messages which will be sent to syslog destination.
INT raisecomLogDestDiscriminator	1.3.6.1.4.1.8886.1.4.1.1.17.1.4	INTEGER	read-write	The discriminator associated with the specified destination.
INT raisecomLogDestLoggedMessages	1.3.6.1.4.1.8886.1.4.1.1.17.1.5	INTEGER	read-write	The count of messages that sent to the destination.
INT raisecomLogDestDropMessages	1.3.6.1.4.1.8886.1.4.1.1.17.1.6	INTEGER	read-write	The count of messages that droped by the destination.
raisecomLogDiscriminatorTable	1.3.6.1.4.1.8886.1.4.1.1.18		not-accessible	A list of discriminator entries.
raisecomLogDiscriminatorEntry	1.3.6.1.4.1.8886.1.4.1.1.18.1		not-accessible	The syslog discriminator list group infomation entry.
INT raisecomLogDiscriminatorIndex	1.3.6.1.4.1.8886.1.4.1.1.18.1.1	INTEGER	not-accessible	This object index of syslog discriminator entry.
INT raisecomLogDiscriminatorFacilityAct	1.3.6.1.4.1.8886.1.4.1.1.18.1.2	INTEGER	read-write	The action for facility filter.
OCT raisecomLogDiscriminatorFacilityStr	1.3.6.1.4.1.8886.1.4.1.1.18.1.3	OCTET STRING	read-write	The string content for facility filter.
INT raisecomLogDiscriminatorMnemonicsAct	1.3.6.1.4.1.8886.1.4.1.1.18.1.4	INTEGER	read-write	The action for mnemonics filter.
OCT raisecomLogDiscriminatorMnemonicsStr	1.3.6.1.4.1.8886.1.4.1.1.18.1.5	OCTET STRING	read-write	The string content for mnemonics filter.
INT raisecomLogDiscriminatorMsgbodyAct	1.3.6.1.4.1.8886.1.4.1.1.18.1.6	INTEGER	read-write	The action for message body filter.
OCT raisecomLogDiscriminatorMsgbodyStr	1.3.6.1.4.1.8886.1.4.1.1.18.1.7	OCTET STRING	read-write	The string content for message body filter.
raisecomLogHistoryTable	1.3.6.1.4.1.8886.1.4.1.1.19		not-accessible	A list of history entries.
raisecomLogHistoryEntry	1.3.6.1.4.1.8886.1.4.1.1.19.1		not-accessible	The syslog history list group infomation entry.
INT raisecomLogHistIndex	1.3.6.1.4.1.8886.1.4.1.1.19.1.1	INTEGER	not-accessible	This object index of syslog history entry.
OCT raisecomLogHistFacility	1.3.6.1.4.1.8886.1.4.1.1.19.1.2	OCTET STRING	read-only	The facility of message sent to hisstory table.
SYS raisecomLogHistSeverity	1.3.6.1.4.1.8886.1.4.1.1.19.1.3	SyslogSeverity	read-only	The severity of message sent to hisstory table.
OCT raisecomLogHistMnemonics	1.3.6.1.4.1.8886.1.4.1.1.19.1.4	OCTET STRING	read-only	The mnemonics of message sent to hisstory table.
OCT raisecomLogHistMsgbody	1.3.6.1.4.1.8886.1.4.1.1.19.1.5	OCTET STRING	read-only	The content of syslog message.
INT raisecomLogHistTimestamp	1.3.6.1.4.1.8886.1.4.1.1.19.1.6	INTEGER	read-only	The time stamp type of history entry.
raisecomLogServer	1.3.6.1.4.1.8886.1.4.1.2
INT raisecomLogMaxNumberOfLogServer	1.3.6.1.4.1.8886.1.4.1.2.1	INTEGER	read-only	The Max Number of syslog server
INT raisecomLogServerNumber	1.3.6.1.4.1.8886.1.4.1.2.2	INTEGER	read-only	The Number of syslog server that has been configured
raisecomLogServerTable	1.3.6.1.4.1.8886.1.4.1.2.3		not-accessible	A list of raisecomSyslogServiceServer entries.
raisecomLogServerEntry	1.3.6.1.4.1.8886.1.4.1.2.3.1		not-accessible	The syslog service server list group infomation entry.
IP raisecomLogServerIpAddress	1.3.6.1.4.1.8886.1.4.1.2.3.1.1	IpAddress	not-accessible	The value of this object is the IpAddress of the server to which the syslog messages will be sent.
INT raisecomLogServerPort	1.3.6.1.4.1.8886.1.4.1.2.3.1.2	INTEGER	read-only	The value of this object is the port of the server to which the syslog messages will be sent.
LOG raisecomLogFacility	1.3.6.1.4.1.8886.1.4.1.2.3.1.3	LogFacility	read-create	The facility specifies the subsystem that produced the message, i.e. all mail programs log with the mail facility (LOG_MAIL) if they log using syslog.The default value is local7.
SYS raisecomLogServerMaxSeverity	1.3.6.1.4.1.8886.1.4.1.2.3.1.4	SyslogSeverity	read-create	The max severity of messages which will be sent to syslog host. The default value is info .
ROW raisecomLogServerRowStatus	1.3.6.1.4.1.8886.1.4.1.2.3.1.5	RowStatus	read-create	This object indicates the status of this entry.
INT raisecomLogServerLoggedMessages	1.3.6.1.4.1.8886.1.4.1.2.3.1.6	INTEGER	read-only	The number of log messages which send to syslog server.
INT raisecomLogServerDropMessages	1.3.6.1.4.1.8886.1.4.1.2.3.1.7	INTEGER	read-only	The number of log messages which droped by syslog server.
INT raisecomLogServerDiscriminator	1.3.6.1.4.1.8886.1.4.1.2.3.1.8	INTEGER	read-create	The discriminator associated with the specified syslog server.
raisecomDebug	1.3.6.1.4.1.8886.1.4.1.3
raisecomDebugTable	1.3.6.1.4.1.8886.1.4.1.3.1		not-accessible	A list of raisecom Debug entries.
raisecomDebugEntry	1.3.6.1.4.1.8886.1.4.1.3.1.1		not-accessible	The debug infomation entry.
INT raisecomDebugIndex	1.3.6.1.4.1.8886.1.4.1.3.1.1.1	INTEGER	not-accessible	This object index of system debug entry.
OCT raisecomDebugModuleName	1.3.6.1.4.1.8886.1.4.1.3.1.1.2	OCTET STRING	read-only	This name of debugging module .
ENA raisecomDebugModuleEnable	1.3.6.1.4.1.8886.1.4.1.3.1.1.3	EnableVar	read-write	This switch of specific module .
OCT raisecomDebugMsgName	1.3.6.1.4.1.8886.1.4.1.3.1.1.4	OCTET STRING	read-write	The name of syslog debug message.
raisecomLogTrapGroup	1.3.6.1.4.1.8886.1.4.1.4
NTF raisecomLogTrap	1.3.6.1.4.1.8886.1.4.1.4.1			Syslog message trap.

RFC description

Syslog service configuration and management for Raisecom systems, enabling centralized log message collection with severity and facility tracking.

Start monitoring Raisecom switch, access/aggregation device (syslog service configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RAISECOM-SYSLOG-SERVICE-MIB

What Is RAISECOM-SYSLOG-SERVICE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description