RAISECOM-OSPF-MIB

All MIBs › RAISECOM-OSPF-MIB

Organization: raisecom

Last Updated: 2004-12-20

Category: Raisecom Networks

Description:

Extends OSPF routing configuration and link-state monitoring on Raisecom access devices.

Imported Objects

iscomSwitch

OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

What Is RAISECOM-OSPF-MIB?

RAISECOM-OSPF-MIB is a private MIB from Raisecom extending standard OSPF routing configuration and link-state monitoring on Raisecom access and aggregation devices, adding vendor-specific authentication objects. It exposes MD5 authentication key configuration for OSPF interfaces and virtual links, alongside general OSPF configuration objects. While primarily configuration-focused, it supports monitoring of the OSPF routing software's operational integrity by confirming authentication keys are correctly provisioned and active, which affects whether adjacencies can form. It notably extends and depends on the standard OSPF-MIB (RFC 1850/4750) for baseline OSPF objects. It is typically deployed on Raisecom Layer 3 access devices participating in OSPF routing domains requiring authenticated adjacencies. Network engineers evaluating or troubleshooting this functionality can download the RAISECOM-OSPF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RAISECOM-OSPF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

OSPF interface MD5 authentication key configuration
virtual link MD5 authentication settings
authentication key row status
general OSPF configuration parameters

Supported Devices

Raisecom Layer 3 access/aggregation devices

Monitoring Examples

An administrator would poll rcOspfIfMd5AuthTable entries, indexed by rcOspfIfMd5AuthIpAddress, to verify rcOspfIfMd5AuthKeyId and rcOspfIfMd5AuthKeyRowStatus are active and correctly configured for a given interface. For virtual links, rcOspfVirtIfMd5AuthTable entries indexed by rcOspfVirtIfMd5AuthAreaId and rcOspfVirtIfMd5AuthNeighbor would be checked; a key mismatch here would prevent the virtual link's OSPF adjacency from forming, visible as a stuck neighbor state in the standard OSPF-MIB neighbor table.

OIDs

OID symbolic	OID numeric	Type	Access	Description
rcOspf	1.3.6.1.4.1.8886.6.1.18			The MIB module for ospf.
rcOspfConfig	1.3.6.1.4.1.8886.6.1.18.4
INT rcOspfDistance	1.3.6.1.4.1.8886.6.1.18.4.1	INTEGER	read-write	distance of ospf,value range is 1--200.
INT rcOspfIfMd5AuthAddressLessIf	1.3.6.1.4.1.8886.6.1.18.1.1.2	INTEGER	read-only	For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
rcOspfIfMd5AuthEntry	1.3.6.1.4.1.8886.6.1.18.1.1		not-accessible	The OSPF Interface MD5 Auththentication Entry describes one Authentication Key from the viewpoint of OSPF.
IP rcOspfIfMd5AuthIpAddress	1.3.6.1.4.1.8886.6.1.18.1.1.1	IpAddress	read-only	The IP address of this OSPF interface.
OCT rcOspfIfMd5AuthKey	1.3.6.1.4.1.8886.6.1.18.1.1.4	OCTET STRING	read-create	This is the secret key which is used to create the message digest appended to the OSPF packet.
INT rcOspfIfMd5AuthKeyId	1.3.6.1.4.1.8886.6.1.18.1.1.3	INTEGER	read-only	This object identifies the secret key used to create the message digest appended to the OSPF packet.
ROW rcOspfIfMd5AuthKeyRowStatus	1.3.6.1.4.1.8886.6.1.18.1.1.5	RowStatus	read-create	Identifies the status of the key
rcOspfIfMd5AuthTable	1.3.6.1.4.1.8886.6.1.18.1		not-accessible	The OSPF Interface Authentication Table describes the parameters required for MD5 cryptographic Authentication.
IP rcOspfNetworkAreaId	1.3.6.1.4.1.8886.6.1.18.5.1.3	IpAddress	read-create	an ospf area that the ospf interface is in.
rcOspfNetworkEntry	1.3.6.1.4.1.8886.6.1.18.5.1		not-accessible	Before a interface startup ospf protocol,the interface must be added to an ospf area. The OSPF network Table add a ospf interface into an ospf area.
IP rcOspfNetworkIfIpAddress	1.3.6.1.4.1.8886.6.1.18.5.1.1	IpAddress	read-create	The IP address of this OSPF interface.
IP rcOspfNetworkIfMask	1.3.6.1.4.1.8886.6.1.18.5.1.2	IpAddress	read-create	mask of this OSPF interface.
ROW rcOspfNetworkRowStatus	1.3.6.1.4.1.8886.6.1.18.5.1.4	RowStatus	read-create	This variable displays the status of the entry.
rcOspfNetworkTable	1.3.6.1.4.1.8886.6.1.18.5		not-accessible	Before a interface startup ospf protocol,the interface must be added to an ospf area. The OSPF network Table add a ospf interface into an ospf area.
rcOspfNssaAreaEntry	1.3.6.1.4.1.8886.6.1.18.3.1		not-accessible	The OSPF Nssa Area Entry describes one OSPF Nssa Area.
ARE rcOspfNssaAreaId	1.3.6.1.4.1.8886.6.1.18.3.1.1	AreaID	read-only	The Nssa Area Id.
rcOspfNssaAreaTable	1.3.6.1.4.1.8886.6.1.18.3		not-accessible	The OSPF Nssa Area Table describes nssa area's parameters.
INT rcOspfNssaDefaultCost	1.3.6.1.4.1.8886.6.1.18.3.1.3	INTEGER	read-create	The Type of Service associated with the metric. On creation, this can be derived from the instance.
ROW rcOspfNssaRowStatus	1.3.6.1.4.1.8886.6.1.18.3.1.4	RowStatus	read-create	This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
INT rcOspfNssaTos	1.3.6.1.4.1.8886.6.1.18.3.1.2	INTEGER	read-only	The Nssa Area TOS.
ARE rcOspfVirtIfMd5AuthAreaId	1.3.6.1.4.1.8886.6.1.18.2.1.1	AreaID	read-only	The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0.
rcOspfVirtIfMd5AuthEntry	1.3.6.1.4.1.8886.6.1.18.2.1		not-accessible	The OSPF Interface Md5 Auththentication Entry describes one Authentication Key from the viewpoint of OSPF.
OCT rcOspfVirtIfMd5AuthKey	1.3.6.1.4.1.8886.6.1.18.2.1.4	OCTET STRING	read-create	This is the secret key which is used to create the message digest appended to the OSPF packet.
INT rcOspfVirtIfMd5AuthKeyId	1.3.6.1.4.1.8886.6.1.18.2.1.3	INTEGER	read-only	This object identifies the secret key used to create the message digest appended to the OSPF packet.
ROW rcOspfVirtIfMd5AuthKeyRowStatus	1.3.6.1.4.1.8886.6.1.18.2.1.5	RowStatus	read-create	Identifies the status of the key
ROU rcOspfVirtIfMd5AuthNeighbor	1.3.6.1.4.1.8886.6.1.18.2.1.2	RouterID	read-only	The Router ID of the Virtual Neighbor.
rcOspfVirtIfMd5AuthTable	1.3.6.1.4.1.8886.6.1.18.2		not-accessible	The OSPF Interface Authentication Table describes the parameters required for Md5 cryptographic Authentication.

OID symbolic	OID numeric	Type	Access	Description
rcOspf	1.3.6.1.4.1.8886.6.1.18			The MIB module for ospf.
rcOspfIfMd5AuthTable	1.3.6.1.4.1.8886.6.1.18.1		not-accessible	The OSPF Interface Authentication Table describes the parameters required for MD5 cryptographic Authentication.
rcOspfIfMd5AuthEntry	1.3.6.1.4.1.8886.6.1.18.1.1		not-accessible	The OSPF Interface MD5 Auththentication Entry describes one Authentication Key from the viewpoint of OSPF.
IP rcOspfIfMd5AuthIpAddress	1.3.6.1.4.1.8886.6.1.18.1.1.1	IpAddress	read-only	The IP address of this OSPF interface.
INT rcOspfIfMd5AuthAddressLessIf	1.3.6.1.4.1.8886.6.1.18.1.1.2	INTEGER	read-only	For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
INT rcOspfIfMd5AuthKeyId	1.3.6.1.4.1.8886.6.1.18.1.1.3	INTEGER	read-only	This object identifies the secret key used to create the message digest appended to the OSPF packet.
OCT rcOspfIfMd5AuthKey	1.3.6.1.4.1.8886.6.1.18.1.1.4	OCTET STRING	read-create	This is the secret key which is used to create the message digest appended to the OSPF packet.
ROW rcOspfIfMd5AuthKeyRowStatus	1.3.6.1.4.1.8886.6.1.18.1.1.5	RowStatus	read-create	Identifies the status of the key
rcOspfVirtIfMd5AuthTable	1.3.6.1.4.1.8886.6.1.18.2		not-accessible	The OSPF Interface Authentication Table describes the parameters required for Md5 cryptographic Authentication.
rcOspfVirtIfMd5AuthEntry	1.3.6.1.4.1.8886.6.1.18.2.1		not-accessible	The OSPF Interface Md5 Auththentication Entry describes one Authentication Key from the viewpoint of OSPF.
ARE rcOspfVirtIfMd5AuthAreaId	1.3.6.1.4.1.8886.6.1.18.2.1.1	AreaID	read-only	The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0.
ROU rcOspfVirtIfMd5AuthNeighbor	1.3.6.1.4.1.8886.6.1.18.2.1.2	RouterID	read-only	The Router ID of the Virtual Neighbor.
INT rcOspfVirtIfMd5AuthKeyId	1.3.6.1.4.1.8886.6.1.18.2.1.3	INTEGER	read-only	This object identifies the secret key used to create the message digest appended to the OSPF packet.
OCT rcOspfVirtIfMd5AuthKey	1.3.6.1.4.1.8886.6.1.18.2.1.4	OCTET STRING	read-create	This is the secret key which is used to create the message digest appended to the OSPF packet.
ROW rcOspfVirtIfMd5AuthKeyRowStatus	1.3.6.1.4.1.8886.6.1.18.2.1.5	RowStatus	read-create	Identifies the status of the key
rcOspfNssaAreaTable	1.3.6.1.4.1.8886.6.1.18.3		not-accessible	The OSPF Nssa Area Table describes nssa area's parameters.
rcOspfNssaAreaEntry	1.3.6.1.4.1.8886.6.1.18.3.1		not-accessible	The OSPF Nssa Area Entry describes one OSPF Nssa Area.
ARE rcOspfNssaAreaId	1.3.6.1.4.1.8886.6.1.18.3.1.1	AreaID	read-only	The Nssa Area Id.
INT rcOspfNssaTos	1.3.6.1.4.1.8886.6.1.18.3.1.2	INTEGER	read-only	The Nssa Area TOS.
INT rcOspfNssaDefaultCost	1.3.6.1.4.1.8886.6.1.18.3.1.3	INTEGER	read-create	The Type of Service associated with the metric. On creation, this can be derived from the instance.
ROW rcOspfNssaRowStatus	1.3.6.1.4.1.8886.6.1.18.3.1.4	RowStatus	read-create	This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
rcOspfConfig	1.3.6.1.4.1.8886.6.1.18.4
INT rcOspfDistance	1.3.6.1.4.1.8886.6.1.18.4.1	INTEGER	read-write	distance of ospf,value range is 1--200.
rcOspfNetworkTable	1.3.6.1.4.1.8886.6.1.18.5		not-accessible	Before a interface startup ospf protocol,the interface must be added to an ospf area. The OSPF network Table add a ospf interface into an ospf area.
rcOspfNetworkEntry	1.3.6.1.4.1.8886.6.1.18.5.1		not-accessible	Before a interface startup ospf protocol,the interface must be added to an ospf area. The OSPF network Table add a ospf interface into an ospf area.
IP rcOspfNetworkIfIpAddress	1.3.6.1.4.1.8886.6.1.18.5.1.1	IpAddress	read-create	The IP address of this OSPF interface.
IP rcOspfNetworkIfMask	1.3.6.1.4.1.8886.6.1.18.5.1.2	IpAddress	read-create	mask of this OSPF interface.
IP rcOspfNetworkAreaId	1.3.6.1.4.1.8886.6.1.18.5.1.3	IpAddress	read-create	an ospf area that the ospf interface is in.
ROW rcOspfNetworkRowStatus	1.3.6.1.4.1.8886.6.1.18.5.1.4	RowStatus	read-create	This variable displays the status of the entry.

AreaID (2)
ARE rcOspfNssaAreaId	1.3.6.1.4.1.8886.6.1.18.3.1.1	AreaID	read-only	The Nssa Area Id.
ARE rcOspfVirtIfMd5AuthAreaId	1.3.6.1.4.1.8886.6.1.18.2.1.1	AreaID	read-only	The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0.
INTEGER (6)
INT rcOspfDistance	1.3.6.1.4.1.8886.6.1.18.4.1	INTEGER	read-write	distance of ospf,value range is 1--200.
INT rcOspfIfMd5AuthAddressLessIf	1.3.6.1.4.1.8886.6.1.18.1.1.2	INTEGER	read-only	For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
INT rcOspfIfMd5AuthKeyId	1.3.6.1.4.1.8886.6.1.18.1.1.3	INTEGER	read-only	This object identifies the secret key used to create the message digest appended to the OSPF packet.
INT rcOspfNssaDefaultCost	1.3.6.1.4.1.8886.6.1.18.3.1.3	INTEGER	read-create	The Type of Service associated with the metric. On creation, this can be derived from the instance.
INT rcOspfNssaTos	1.3.6.1.4.1.8886.6.1.18.3.1.2	INTEGER	read-only	The Nssa Area TOS.
INT rcOspfVirtIfMd5AuthKeyId	1.3.6.1.4.1.8886.6.1.18.2.1.3	INTEGER	read-only	This object identifies the secret key used to create the message digest appended to the OSPF packet.
IpAddress (4)
IP rcOspfIfMd5AuthIpAddress	1.3.6.1.4.1.8886.6.1.18.1.1.1	IpAddress	read-only	The IP address of this OSPF interface.
IP rcOspfNetworkAreaId	1.3.6.1.4.1.8886.6.1.18.5.1.3	IpAddress	read-create	an ospf area that the ospf interface is in.
IP rcOspfNetworkIfIpAddress	1.3.6.1.4.1.8886.6.1.18.5.1.1	IpAddress	read-create	The IP address of this OSPF interface.
IP rcOspfNetworkIfMask	1.3.6.1.4.1.8886.6.1.18.5.1.2	IpAddress	read-create	mask of this OSPF interface.
OCTET STRING (2)
OCT rcOspfIfMd5AuthKey	1.3.6.1.4.1.8886.6.1.18.1.1.4	OCTET STRING	read-create	This is the secret key which is used to create the message digest appended to the OSPF packet.
OCT rcOspfVirtIfMd5AuthKey	1.3.6.1.4.1.8886.6.1.18.2.1.4	OCTET STRING	read-create	This is the secret key which is used to create the message digest appended to the OSPF packet.
RouterID (1)
ROU rcOspfVirtIfMd5AuthNeighbor	1.3.6.1.4.1.8886.6.1.18.2.1.2	RouterID	read-only	The Router ID of the Virtual Neighbor.
RowStatus (4)
ROW rcOspfIfMd5AuthKeyRowStatus	1.3.6.1.4.1.8886.6.1.18.1.1.5	RowStatus	read-create	Identifies the status of the key
ROW rcOspfNetworkRowStatus	1.3.6.1.4.1.8886.6.1.18.5.1.4	RowStatus	read-create	This variable displays the status of the entry.
ROW rcOspfNssaRowStatus	1.3.6.1.4.1.8886.6.1.18.3.1.4	RowStatus	read-create	This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
ROW rcOspfVirtIfMd5AuthKeyRowStatus	1.3.6.1.4.1.8886.6.1.18.2.1.5	RowStatus	read-create	Identifies the status of the key
No type (10)
rcOspf	1.3.6.1.4.1.8886.6.1.18			The MIB module for ospf.
rcOspfConfig	1.3.6.1.4.1.8886.6.1.18.4
rcOspfIfMd5AuthEntry	1.3.6.1.4.1.8886.6.1.18.1.1		not-accessible	The OSPF Interface MD5 Auththentication Entry describes one Authentication Key from the viewpoint of OSPF.
rcOspfIfMd5AuthTable	1.3.6.1.4.1.8886.6.1.18.1		not-accessible	The OSPF Interface Authentication Table describes the parameters required for MD5 cryptographic Authentication.
rcOspfNetworkEntry	1.3.6.1.4.1.8886.6.1.18.5.1		not-accessible	Before a interface startup ospf protocol,the interface must be added to an ospf area. The OSPF network Table add a ospf interface into an ospf area.
rcOspfNetworkTable	1.3.6.1.4.1.8886.6.1.18.5		not-accessible	Before a interface startup ospf protocol,the interface must be added to an ospf area. The OSPF network Table add a ospf interface into an ospf area.
rcOspfNssaAreaEntry	1.3.6.1.4.1.8886.6.1.18.3.1		not-accessible	The OSPF Nssa Area Entry describes one OSPF Nssa Area.
rcOspfNssaAreaTable	1.3.6.1.4.1.8886.6.1.18.3		not-accessible	The OSPF Nssa Area Table describes nssa area's parameters.
rcOspfVirtIfMd5AuthEntry	1.3.6.1.4.1.8886.6.1.18.2.1		not-accessible	The OSPF Interface Md5 Auththentication Entry describes one Authentication Key from the viewpoint of OSPF.
rcOspfVirtIfMd5AuthTable	1.3.6.1.4.1.8886.6.1.18.2		not-accessible	The OSPF Interface Authentication Table describes the parameters required for Md5 cryptographic Authentication.

RFC description

Manages OSPF routing protocol MD5 authentication configuration on Raisecom switches.

Start monitoring Raisecom Layer 3 access/aggregation devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RAISECOM-OSPF-MIB

This MIB depends on

Related MIBs

What Is RAISECOM-OSPF-MIB?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description