RAISECOM-PON-DEVICE-MIB

All MIBs › RAISECOM-PON-DEVICE-MIB

Organization: RAISECOM TECH, Ltd.

Last Updated: 2011-03-09

Category: Raisecom Networks

Description: Manages PON OLT device configuration, ONU registration, and optical line parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RAISECOM-PON-DEVICE-MIB?

RAISECOM-PON-DEVICE-MIB is a Raisecom vendor MIB for managing Passive Optical Network (PON) OLT (Optical Line Terminal) devices, covering device-level configuration and the registration/management of subordinate ONUs (Optical Network Units) on each PON port. It exposes device-management objects for OLT operating parameters and tracks which ONUs are registered against each PON interface, along with optical line parameters for the PON ports themselves. This MIB has both a configuration role and a hardware/service-status monitoring role: it confirms ONUs remain registered (an ONU dropping offline indicates a fiber break, rogue ONU, or power loss at the customer premises) and checks PON port-level optical line health, complementing per-transceiver DDM data with PON-specific registration state. No concrete object or table names were captured for this batch, so the exact structure can't be quoted with certainty, though it likely parallels ITU-T G.984/G.987 GPON/XG-PON OLT management concepts. It is typically deployed on Raisecom OLT chassis/units in FTTH or FTTB access network deployments. Engineers can download the RAISECOM-PON-DEVICE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RAISECOM-PON-DEVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Raisecom GPON/EPON OLT chassis or access device

Monitoring Examples

No specific object or table names were captured for this MIB in the available data, so a fully concrete polling example isn't possible; in general, an operator managing a PON access network would use this MIB's device-management and ONU-registration objects to confirm all subscriber ONUs on a PON port remain registered and to be alerted when one drops offline, which typically indicates a fiber cut, a power outage at the customer site, or a failing ONU.

What Can Be Monitored

ONU registration status per PON port
OLT device configuration state
PON port optical line parameters

Imported Objects

From RAISECOM-BASE-MIB

raisecomAgent

OBJECT-IDENTITY

From RAISECOM-PONSERIES-TC

PONDeviceCardType
PONDeviceType
SlotIndex

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TimeStamp
TruthValue

From SWITCH-TC

EnableVar

OIDs

OID symbolic	OID numeric	Type	Access	Description
raisecomAlarmInput	1.3.6.1.4.1.8886.1.27.10
OCT raisecomAlarmInputDescr	1.3.6.1.4.1.8886.1.27.10.1.1.3	OCTET STRING	read-write	Alarm type description.
raisecomAlarmInputEntry	1.3.6.1.4.1.8886.1.27.10.1.1		not-accessible	Alarm input management table entry.
INT raisecomAlarmInputMontiorEnable	1.3.6.1.4.1.8886.1.27.10.1.1.5	INTEGER	read-write	enable or disable the function of the port environment monitor , default is disable.
I32 raisecomAlarmInputPortId	1.3.6.1.4.1.8886.1.27.10.1.1.1	Integer32	read-only	Alarm Input port id.
INT raisecomAlarmInputState	1.3.6.1.4.1.8886.1.27.10.1.1.4	INTEGER	read-only	State of this input port.
raisecomAlarmInputTable	1.3.6.1.4.1.8886.1.27.10.1		not-accessible	Alarm input management table.
INT raisecomAlarmInputType	1.3.6.1.4.1.8886.1.27.10.1.1.2	INTEGER	read-write	Alarm type code. 0 means that this port is unused.
NTF raisecomCardFaultRecoveredTrap	1.3.6.1.4.1.8886.1.27.8.16			Card fault recovered notificaiton. It will not be sent for power devices and fans.
NTF raisecomCardFaultTrap	1.3.6.1.4.1.8886.1.27.8.15			Card abnormal notification. It will not be sent for power devices and fans.
NTF raisecomCardLoadConfigFailedTrap	1.3.6.1.4.1.8886.1.27.8.34			Card config loading failed notification.
NTF raisecomCardMissCancelledTrap	1.3.6.1.4.1.8886.1.27.8.10			Card plugged-in notification. It will not be sent for power devices and fans.
NTF raisecomCardMissTrap	1.3.6.1.4.1.8886.1.27.8.9			Card missing notification. Sent when no card is detected in a slot and expected card type for this slot is configured. It will not be sent for power devices and fans.
I32 raisecomCardPanelPortNum	1.3.6.1.4.1.8886.1.27.11.1.1.2	Integer32	read-only	Plane port number of this card-type template.
OCT raisecomCardPanelPortTypes	1.3.6.1.4.1.8886.1.27.11.1.1.3	OCTET STRING	read-only	Plane port types of this type card template.
INT raisecomCardPermitedSlots	1.3.6.1.4.1.8886.1.27.11.1.1.4	INTEGER	read-only	All the slot id of this type card which can be installed.
raisecomCardPower	1.3.6.1.4.1.8886.1.27.12
raisecomCardPowerEntry	1.3.6.1.4.1.8886.1.27.12.1.1		not-accessible	card power management table entry.
NTF raisecomCardPowerFaultRecoveredTrap	1.3.6.1.4.1.8886.1.27.8.21			Card power fault recovered notification.
NTF raisecomCardPowerFaultTrap	1.3.6.1.4.1.8886.1.27.8.20			Card power fault notification.
SLO raisecomCardPowerSlotId	1.3.6.1.4.1.8886.1.27.12.1.1.1	SlotIndex	read-only	Slot Index.
raisecomCardPowerTable	1.3.6.1.4.1.8886.1.27.12.1		not-accessible	Card power management table.
INT raisecomCardPowerType	1.3.6.1.4.1.8886.1.27.12.1.1.2	INTEGER	read-only	card power types.
I32 raisecomCardPowerVolHighThres	1.3.6.1.4.1.8886.1.27.12.1.1.4	Integer32	read-only	the high voltage threshold of the power.
I32 raisecomCardPowerVolLowThres	1.3.6.1.4.1.8886.1.27.12.1.1.5	Integer32	read-only	the low voltage threshold of the power.
I32 raisecomCardPowerVolValue	1.3.6.1.4.1.8886.1.27.12.1.1.3	Integer32	read-only	the current card voltage of the power type.
raisecomCardTemplate	1.3.6.1.4.1.8886.1.27.11
raisecomCardTemplateEntry	1.3.6.1.4.1.8886.1.27.11.1.1		not-accessible	Card template table entry.
raisecomCardTemplateTable	1.3.6.1.4.1.8886.1.27.11.1		not-accessible	Card Template table.
PON raisecomCardType	1.3.6.1.4.1.8886.1.27.11.1.1.1	PONDeviceCardType	read-only	The card type of this template.
NTF raisecomCardTypeMisMatchCancelledTrap	1.3.6.1.4.1.8886.1.27.8.14			Actual card type and expected card type matched notification. It will not be sent for power devices and fans.
NTF raisecomCardTypeMisMatchTrap	1.3.6.1.4.1.8886.1.27.8.13			Actual card type and expected card type mismatched notification. It will not be sent for power devices and fans.
NTF raisecomCardVersionMismatchRecoveredTrap	1.3.6.1.4.1.8886.1.27.8.36			Card version-mismatch recovered notification.
NTF raisecomCardVersionMismatchTrap	1.3.6.1.4.1.8886.1.27.8.35			Card version mismatched notification.
raisecomDeviceAlarm	1.3.6.1.4.1.8886.1.27.8
raisecomdeviceMgt	1.3.6.1.4.1.8886.1.27			The MIB module defining objects for device management
NTF raisecomExternalAlarmRecoverdTrap	1.3.6.1.4.1.8886.1.27.8.23			External alarm recovered notification.
NTF raisecomExternalAlarmTrap	1.3.6.1.4.1.8886.1.27.8.22			External alarm notification.
raisecomFan	1.3.6.1.4.1.8886.1.27.5
NTF raisecomFanFoundTrap	1.3.6.1.4.1.8886.1.27.8.6			Fan plugged-in notification.
INT raisecomFanMaxSpeed	1.3.6.1.4.1.8886.1.27.5.2	INTEGER	read-write	the maximum fan speed.
INT raisecomFanMinSpeed	1.3.6.1.4.1.8886.1.27.5.3	INTEGER	read-write	the minimun fan speed.
NTF raisecomFanMissTrap	1.3.6.1.4.1.8886.1.27.8.5			Fan missing notification.
SLO raisecomFanSlotId	1.3.6.1.4.1.8886.1.27.5.1.1.1	SlotIndex	read-only	Slot Index.
INT raisecomFanSpeedGear	1.3.6.1.4.1.8886.1.27.5.6	INTEGER	read-only	the fan speed gear.
INT raisecomFanSpeedManual	1.3.6.1.4.1.8886.1.27.5.5	INTEGER	read-write	manual control the fan speed by configurating the fan different gear.
INT raisecomFanSpeedMode	1.3.6.1.4.1.8886.1.27.5.4	INTEGER	read-write	the fan control mode ,auto means the fan speed is controled by the temperature automatically,the other means controled manually.
OCT raisecomNEAssetID	1.3.6.1.4.1.8886.1.27.1.2	OCTET STRING	read-write	Asset ID of this network element for the carrier.
raisecomNEEquip	1.3.6.1.4.1.8886.1.27.1
OCT raisecomNEMfrVendor	1.3.6.1.4.1.8886.1.27.1.3	OCTET STRING	read-only	Vendor name for this network element.
INT raisecomNETmptAlarmThreshold	1.3.6.1.4.1.8886.1.27.1.4	INTEGER	read-write	Temperature threshold to issure the temperature alarm. The applicability depends on the device type.
PON raisecomNEType	1.3.6.1.4.1.8886.1.27.1.1	PONDeviceType	read-only	Network element type.
NTF raisecomNonInstalledCardExist	1.3.6.1.4.1.8886.1.27.8.11			Non-installed card plugged-in notification. The binded variable 'raisecomSlotActCardType' is currently unused. It will not be sent for power devices and fans.
NTF raisecomNonInstalledCardExistCancelled	1.3.6.1.4.1.8886.1.27.8.12			Non-installed card plugged-out or installed notification. It will not be sent for power devices and fans.
NTF raisecomNonInstalledCardTypeTrap	1.3.6.1.4.1.8886.1.27.8.19			Card type of a non-installed card notification.
raisecomPower	1.3.6.1.4.1.8886.1.27.4
raisecomPowerDeviceEntry	1.3.6.1.4.1.8886.1.27.4.1.1		not-accessible	Power device management table entry.
SLO raisecomPowerDeviceIndex	1.3.6.1.4.1.8886.1.27.4.1.1.1	SlotIndex	read-only	Power device id.
INT raisecomPowerDeviceInputType	1.3.6.1.4.1.8886.1.27.4.1.1.2	INTEGER	read-only	Input type of this power device. Null value means that this power device is plugged out.
raisecomPowerDeviceTable	1.3.6.1.4.1.8886.1.27.4.1		not-accessible	Power device management table.
NTF raisecomPowerFaultRecoveredTrap	1.3.6.1.4.1.8886.1.27.8.4			Power device fault recovered notification.
NTF raisecomPowerFaultTrap	1.3.6.1.4.1.8886.1.27.8.3			Power device abnormal notification.
NTF raisecomPowerFoundTrap	1.3.6.1.4.1.8886.1.27.8.2			Power device plugged-in notification.
I32 raisecomPowerInputvol	1.3.6.1.4.1.8886.1.27.4.1.1.9	Integer32	read-only	The input voltage of this power device, it is only meaningful for the manageable power.
INT raisecomPowerInputvolalarmState	1.3.6.1.4.1.8886.1.27.4.1.1.10	INTEGER	read-only	The input voltage alarm state of the power device, it is only meaningful for the manageable power.
I32 raisecomPowerInputvolCrilowerVolThres	1.3.6.1.4.1.8886.1.27.4.1.1.13	Integer32	read-write	The input voltage lower threshold of the Critical alarm , it is only meaningful for the manageable power.
I32 raisecomPowerInputvolCriupperVolThres	1.3.6.1.4.1.8886.1.27.4.1.1.16	Integer32	read-write	The input voltage upper threshold of the Critical alarm , it is only meaningful for the manageable power.
I32 raisecomPowerInputvolMajlowerVolThres	1.3.6.1.4.1.8886.1.27.4.1.1.12	Integer32	read-write	The input voltage lower threshold of the Major alarm, it is only meaningful for the manageable power .
I32 raisecomPowerInputvolMajupperVolThres	1.3.6.1.4.1.8886.1.27.4.1.1.15	Integer32	read-write	The input voltage upper threshold of the Major alarm , it is only meaningful for the manageable power.
I32 raisecomPowerInputvolMinlowerVolThres	1.3.6.1.4.1.8886.1.27.4.1.1.11	Integer32	read-write	The input voltage lower threshold of the Minor alarm , it is only meaningful for the manageable power.
I32 raisecomPowerInputvolMinupperVolThres	1.3.6.1.4.1.8886.1.27.4.1.1.14	Integer32	read-write	The input voltage upper threshold of the Minor alarm , it is only meaningful for the manageable power.
NTF raisecomPowerMissTrap	1.3.6.1.4.1.8886.1.27.8.1			Power device missing notification.
raisecomPowerOutputEntry	1.3.6.1.4.1.8886.1.27.4.2.1		not-accessible	Power device output management table entry.
raisecomPowerOutputTable	1.3.6.1.4.1.8886.1.27.4.2		not-accessible	Power device output management table.
INT raisecomPowerOutputType	1.3.6.1.4.1.8886.1.27.4.2.1.1	INTEGER	read-only	Output type of the power device.
I32 raisecomPowerOutputvol	1.3.6.1.4.1.8886.1.27.4.2.1.3	Integer32	read-only	Output voltage of the power,it is only meaningful for the manageable power, for the 5v output voltage ,the unit is 0.01v; for the -48V output voltage, the unit is 0.1v
I32 raisecomPowerOutputvollowerThres	1.3.6.1.4.1.8886.1.27.4.2.1.4	Integer32	read-write	The threshold of the low output voltage alarm,it is only meaningful for the manageable power, for the 5v output voltage ,the unit is 0.01v; for the -48V output voltage, the unit is 0.1v
I32 raisecomPowerOutputvolupperThres	1.3.6.1.4.1.8886.1.27.4.2.1.5	Integer32	read-write	The threshold of the high output voltage alarm,it is only meaningful for the manageable power, for the 5v output voltage ,the unit is 0.01v; for the -48V output voltage, the unit is 0.1v
INT raisecomPowerStatus	1.3.6.1.4.1.8886.1.27.4.2.1.2	INTEGER	read-only	Output status of this power output. Null value means that this output port does not exist.
I32 raisecomPowerTemperatureThres	1.3.6.1.4.1.8886.1.27.4.1.1.17	Integer32	read-write	The temperature threshold of the power device , it is only meaningful for the manageable power, not used in V2.0.
NTF raisecomPowerTemperatureTooHighRecoveredTrap	1.3.6.1.4.1.8886.1.27.8.33			power temperature too high recovered notification, it is only meaningful for the manageable power.
NTF raisecomPowerTemperatureTooHighTrap	1.3.6.1.4.1.8886.1.27.8.32			power temperature too high notification, it is only meaningful for the manageable power.
NTF raisecomPowerVoltageInputRecoveredTrap	1.3.6.1.4.1.8886.1.27.8.29			Input voltage abnormal recovered notification, it is only meaningful for the manageable power.
NTF raisecomPowerVoltageInputTrap	1.3.6.1.4.1.8886.1.27.8.28			Input voltage abnormal notification.
NTF raisecomPowerVoltageOutputRecoveredTrap	1.3.6.1.4.1.8886.1.27.8.31			output voltage abnormal recovered notification, it is only meaningful for the manageable power.
NTF raisecomPowerVoltageOutputTrap	1.3.6.1.4.1.8886.1.27.8.30			output voltage abnormal notification, it is only meaningful for the manageable power.
raisecomShelf	1.3.6.1.4.1.8886.1.27.2
OCT raisecomShelfAssetID	1.3.6.1.4.1.8886.1.27.2.1.1.9	OCTET STRING	read-write	Asset ID of this shelf.
OCT raisecomShelfDescr	1.3.6.1.4.1.8886.1.27.2.1.1.2	OCTET STRING	read-write	Shelf description.
raisecomShelfEntry	1.3.6.1.4.1.8886.1.27.2.1.1		not-accessible	Shelf management table entry.
INT raisecomShelfGenType	1.3.6.1.4.1.8886.1.27.2.1.1.7	INTEGER	read-only	Shelf Species.
OCT raisecomShelfHwVersion	1.3.6.1.4.1.8886.1.27.2.1.1.4	OCTET STRING	read-only	Shelf hardware version. For pizza-box type of device, it indicates version of the device, not of the card. For other type of device, it indicates version of the shelf, mainly of the backplane.
I32 raisecomShelfId	1.3.6.1.4.1.8886.1.27.2.1.1.1	Integer32	read-only	Shelf id.
INT raisecomShelfLevel	1.3.6.1.4.1.8886.1.27.2.1.1.5	INTEGER	read-only	Shelf level.
MAC raisecomShelfMac	1.3.6.1.4.1.8886.1.27.2.1.1.15	MacAddress	read-only	The MAC address of this shelf.
OCT raisecomShelfMfrVendor	1.3.6.1.4.1.8886.1.27.2.1.1.8	OCTET STRING	read-only	Vendor name for this shelf.
INT raisecomShelfNMSSlotNum	1.3.6.1.4.1.8886.1.27.2.1.1.12	INTEGER	read-only	Number of slots for management and control cards in this shelf.
I32 raisecomShelfPrimaryNMSSlotId	1.3.6.1.4.1.8886.1.27.2.1.1.13	Integer32	read-only	Slot for the primary management and control card.
I32 raisecomShelfSecondaryNMSSlotId	1.3.6.1.4.1.8886.1.27.2.1.1.14	Integer32	read-only	Slot for the secondary management and control card. Valid only when raisecomShelfNMSSlotNum equals to 2.
OCT raisecomShelfSerialNum	1.3.6.1.4.1.8886.1.27.2.1.1.3	OCTET STRING	read-only	Shelf device serial number.
I32 raisecomShelfSlotNum	1.3.6.1.4.1.8886.1.27.2.1.1.11	Integer32	read-only	Number of slots for installing cards in this shelf.
raisecomShelfTable	1.3.6.1.4.1.8886.1.27.2.1		not-accessible	Shelf management table.
INT raisecomShelfTemperature	1.3.6.1.4.1.8886.1.27.2.1.1.10	INTEGER	read-only	Temperature of this shelf.
NTF raisecomShelfTempertureRecoveredTrap	1.3.6.1.4.1.8886.1.27.8.18			Shelf temperature recovered notification.
NTF raisecomShelfTempertureThresholdCrossingTrap	1.3.6.1.4.1.8886.1.27.8.17			Shelf temperature threshold crossing notification.
OCT raisecomShelfType	1.3.6.1.4.1.8886.1.27.2.1.1.6	OCTET STRING	read-only	Shelf type.
raisecomSlot	1.3.6.1.4.1.8886.1.27.3
OCT raisecomSlotActCardAssetID	1.3.6.1.4.1.8886.1.27.3.1.1.10	OCTET STRING	read-write	Asset id of the card actually installed.
OCT raisecomSlotActCardDescr	1.3.6.1.4.1.8886.1.27.3.1.1.6	OCTET STRING	read-write	Description of the card actually installed. The applicability depends on the card type.
OCT raisecomSlotActCardHwVersion	1.3.6.1.4.1.8886.1.27.3.1.1.8	OCTET STRING	read-only	Hardware version of the card actually installed.
OCT raisecomSlotActCardMfrVendor	1.3.6.1.4.1.8886.1.27.3.1.1.9	OCTET STRING	read-only	Vender name of the card actually installed.
OCT raisecomSlotActCardSerialNum	1.3.6.1.4.1.8886.1.27.3.1.1.7	OCTET STRING	read-only	Serial number of the card actually installed.
INT raisecomSlotActCardState	1.3.6.1.4.1.8886.1.27.3.1.1.11	INTEGER	read-only	Working state of the card actually installed.
OCT raisecomSlotActCardSwVersion	1.3.6.1.4.1.8886.1.27.3.1.1.14	OCTET STRING	read-only	softerware version of the card actually installed.
PON raisecomSlotActCardType	1.3.6.1.4.1.8886.1.27.3.1.1.5	PONDeviceCardType	read-only	Type of the card actually installed.
OCT raisecomSlotDescr	1.3.6.1.4.1.8886.1.27.3.1.1.2	OCTET STRING	read-write	Slot description.
raisecomSlotEntry	1.3.6.1.4.1.8886.1.27.3.1.1		not-accessible	Card slot management table entry.
OCT raisecomSlotExpectCardDescr	1.3.6.1.4.1.8886.1.27.3.1.1.4	OCTET STRING	read-write	Description of the expected card. Currently unused.
PON raisecomSlotExpectCardType	1.3.6.1.4.1.8886.1.27.3.1.1.3	PONDeviceCardType	read-write	Expected card type.
SLO raisecomSlotId	1.3.6.1.4.1.8886.1.27.3.1.1.1	SlotIndex	read-only	Slot id.
INT raisecomSlotPowerState	1.3.6.1.4.1.8886.1.27.3.1.1.15	INTEGER	read-write	set card power-save state on the slot.
INT raisecomSlotReboot	1.3.6.1.4.1.8886.1.27.3.1.1.12	INTEGER	read-write	Reboot the card. Result of reading this attribute is undefined.
OCT raisecomSlotSupportCardTypes	1.3.6.1.4.1.8886.1.27.3.1.1.13	OCTET STRING	read-only	The slots on which the card type can be installed
raisecomSlotTable	1.3.6.1.4.1.8886.1.27.3.1		not-accessible	Card slot management table.
NTF raisecomSubFanAgingRecoveredTrap	1.3.6.1.4.1.8886.1.27.8.25			Sub Fan aging recovered notification.
NTF raisecomSubFanAgingTrap	1.3.6.1.4.1.8886.1.27.8.24			Sub Fan aging notification.
raisecomSubFanEntry	1.3.6.1.4.1.8886.1.27.5.1.1		not-accessible	Fan management table entry.
NTF raisecomSubFanFaultRecoveredTrap	1.3.6.1.4.1.8886.1.27.8.8			Sub Fan fault recovered notification.
NTF raisecomSubFanFaultTrap	1.3.6.1.4.1.8886.1.27.8.7			Sub Fan abnormal notification.
SLO raisecomSubFanId	1.3.6.1.4.1.8886.1.27.5.1.1.2	SlotIndex	read-only	Sub Fan Index.
INT raisecomSubFanSpeed	1.3.6.1.4.1.8886.1.27.5.1.1.4	INTEGER	read-only	Fan current speed.
INT raisecomSubFanStatus	1.3.6.1.4.1.8886.1.27.5.1.1.3	INTEGER	read-only	Fan status. Null value means that this fan is plugged out.
raisecomSubFanTable	1.3.6.1.4.1.8886.1.27.5.1		not-accessible	Fan management table.

RFC description

Passive Optical Network (PON) device management for Raisecom equipment, covering chassis, power, fans, and alarm monitoring.

Start monitoring Raisecom GPON/EPON OLT chassis or access device (ONU registration/management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RAISECOM-PON-DEVICE-MIB

What Is RAISECOM-PON-DEVICE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description