SWITCH-CCP-MIB

All MIBs › SWITCH-CCP-MIB

Organization: Raisecom, Inc.

Last Updated: 2020-10-11

Category: Switch Management - Raisecom

Description: Manages Raisecom CCP cluster protocol configuration, member switches, and commander state.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SWITCH-CCP-MIB?

SWITCH-CCP-MIB is a proprietary Raisecom module for the CCP (Cluster Configuration Protocol) feature on Raisecom switches, covering cluster commander/member relationships alongside CPU packet-caching and mirroring controls. It exposes configuration and operational data such as CPU cache-packet capture settings, buffer size/status, auto-upload scheduling and counters, and mirror-to-CPU status. Its monitoring value centers on software/control-plane status: whether CPU packet caching (used for diagnostics such as capturing control-plane traffic) is enabled and functioning, buffer utilization, and whether captured packets are successfully auto-uploaded, which helps diagnose control-plane or cluster-management issues. It is a vendor-specific extension built on Raisecom's cluster-management architecture rather than a standards-based MIB. It is deployed on Raisecom switches organized into management clusters in carrier or enterprise access networks. Network engineers evaluating or troubleshooting this functionality can download the SWITCH-CCP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SWITCH-CCP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Raisecom managed switch cluster

Monitoring Examples

An admin checks rcCpuCachePacketEnable and rcCpuCachePacketMirrorToCpuStatus to confirm CPU packet capture/mirroring is active on the intended rcCpuCachePacketPortList, then monitors rcCpuCachePacketBufferStatus and rcCpuCachePacketBufferSize for near-full buffer conditions. A stalled rcCpuCachePacketsAutoUploadCounter despite rcCpuCachePacketAutoUpload being enabled would indicate captured diagnostic packets are not being uploaded, hampering troubleshooting of the cluster's commander switch.

What Can Be Monitored

CPU packet-cache capture enable state
captured-packet port list
packet buffer size/status
auto-upload counter/status
mirror-to-CPU status

Imported Objects

From RAISECOM-BASE-MIB

iscomSwitch

OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

From SWITCH-TC

EnableVar
ObjName
PortList

OIDs

OID symbolic	OID numeric	Type	Access	Description
rcCcp	1.3.6.1.4.1.8886.6.1.55			Description of CCP object.
rcCpuCachePacket	1.3.6.1.4.1.8886.6.1.55.1
ENA rcCpuCachePacketEnable	1.3.6.1.4.1.8886.6.1.55.1.1	EnableVar	read-write	Indicates whether the CCP feature is enabled on the device. Enable(1) means that the CCP feature is enabled on this device. Disable(2) means that the CCP feature is disabled.
POR rcCpuCachePacketPortList	1.3.6.1.4.1.8886.6.1.55.1.2	PortList	read-write	The ports that packets will be collected.
INT rcCpuCachePacketLen	1.3.6.1.4.1.8886.6.1.55.1.3	INTEGER	read-write	Set the length of packets which store in the cache. Header indicates the first 64 Bytes of the packet. All indicates the length of the packet.
INT rcCpuCachePacketBufferSize	1.3.6.1.4.1.8886.6.1.55.1.4	INTEGER	read-write	Set the size of the buffer which is used to store the packets.
INT rcCpuCachePacketManualUpload	1.3.6.1.4.1.8886.6.1.55.1.5	INTEGER	read-write	Manual upload the file once. upload-only(1) indicates manual upload the file only. upload-clear(2) indicates manual upload the file and clear the cache.
ENA rcCpuCachePacketAutoUpload	1.3.6.1.4.1.8886.6.1.55.1.6	EnableVar	read-write	Auto upload files.
ENA rcCpuCachePacketOverride	1.3.6.1.4.1.8886.6.1.55.1.7	EnableVar	read-write	Set the enable status of the buffer override mode. 1 indicates the buffer can be overrided. 2 indicates the buffer cannot be overrided.
INT rcCpuCachePacketAutoUploadTimes	1.3.6.1.4.1.8886.6.1.55.1.8	INTEGER	read-write	Set the times of auto upload. 0 indicates forever.The default value is 10.
ENA rcCpuCachePacketClear	1.3.6.1.4.1.8886.6.1.55.1.9	EnableVar	read-write	Clear the cache.
INT rcCpuCachePacketsAutoUploadCounter	1.3.6.1.4.1.8886.6.1.55.1.10	INTEGER	read-only	Indicates the count of already auto upload times.
ENA rcCpuCachePacketMirrorToCpuStatus	1.3.6.1.4.1.8886.6.1.55.1.11	EnableVar	read-only	Indicates whether the MirrorToCpu feature is enabled.
INT rcCpuCachePacketBufferStatus	1.3.6.1.4.1.8886.6.1.55.1.12	INTEGER	read-only	Indicates the status of the buffer in the ccp module. 1 indicates the module does not malloc the memory. 2 indicates the module has malloced the memory ,and the memory is not full. 3 indicates the module has malloced the memory,and the memory is full.
INT rcCpuCachePacketStatus	1.3.6.1.4.1.8886.6.1.55.1.13	INTEGER	read-only	The status of the cpu cache packets module. Idle(1) indicates there is neither upload operation nor collect operation now. Uploading(2) indicates that now packets are being uploaded. Collecting(3) indicates that now packets are being collected.
INT rcCpuCachePacketCount	1.3.6.1.4.1.8886.6.1.55.1.14	INTEGER	read-only	Indicates the number of the packets in the current buffer.
INT rcCpuCachePacketUploadedNumber	1.3.6.1.4.1.8886.6.1.55.1.15	INTEGER	read-only	Indicates the number of the packets which have be uploaded.
rcCpuCachePacketAclTable	1.3.6.1.4.1.8886.6.1.55.1.16		not-accessible	A configable table of acl which is used to collect packets.
rcCpuCachePacketAclEntry	1.3.6.1.4.1.8886.6.1.55.1.16.1		not-accessible	Table entry for acl which is used to collect packets.
INT rcCpuCachePacketPortIndex	1.3.6.1.4.1.8886.6.1.55.1.16.1.1	INTEGER	not-accessible	The port that an acl rule is applied on.
INT rcCpuCachePacketAclType	1.3.6.1.4.1.8886.6.1.55.1.16.1.2	INTEGER	read-write	The type of the acl which is used to collect packets.
INT rcCpuCachePacketAclNo	1.3.6.1.4.1.8886.6.1.55.1.16.1.3	INTEGER	read-write	The index of the acl in the access control list.
ENA rcCpuCachePacketAclEnable	1.3.6.1.4.1.8886.6.1.55.1.16.1.4	EnableVar	read-write	Indicates whether the acl is enabled.
rcCpuCachePacketUploadServerTable	1.3.6.1.4.1.8886.6.1.55.1.17		not-accessible	A configable table of sever where the packets are uploaded to.
rcCpuCachePacketUploadServerEntry	1.3.6.1.4.1.8886.6.1.55.1.17.1		not-accessible	Table entry for sever where the packets are uploaded to.
INT rcCpuCachePacketUploadServerIndex	1.3.6.1.4.1.8886.6.1.55.1.17.1.1	INTEGER	not-accessible	An index that uniquely identifies a server.
INT rcCpuCachePacketUploadServerMode	1.3.6.1.4.1.8886.6.1.55.1.17.1.2	INTEGER	read-write	The protocol to be used for uploading packets. Will default to tftp if not specified.
IP rcCpuCachePacketUploadServerAddress	1.3.6.1.4.1.8886.6.1.55.1.17.1.3	IpAddress	read-write	The ip address of the server.
OBJ rcCpuCachePacketUploadServerUserName	1.3.6.1.4.1.8886.6.1.55.1.17.1.4	ObjName	read-write	The user name of the server.
OBJ rcCpuCachePacketUploadServerPassword	1.3.6.1.4.1.8886.6.1.55.1.17.1.5	ObjName	read-write	The password of the server.
ENA rcCpuCachePacketUploadServerEnable	1.3.6.1.4.1.8886.6.1.55.1.17.1.6	EnableVar	read-write	Indicates whether the server is enabled.
rcCpuCachePacketPortStatisticsTable	1.3.6.1.4.1.8886.6.1.55.1.18		not-accessible	A statistics table of packets based on the port.
rcCpuCachePacketPortStatisticsEntry	1.3.6.1.4.1.8886.6.1.55.1.18.1		not-accessible	Table entry for statistics of the protocol packet based on the port.
INT rcPacketPortStatisticsPortIndex	1.3.6.1.4.1.8886.6.1.55.1.18.1.1	INTEGER	not-accessible	The capture port of the packets ,which is an index of table.
INT rcPacketPortStatisticsProtocolIndex	1.3.6.1.4.1.8886.6.1.55.1.18.1.2	INTEGER	not-accessible	The protocol of the packet ,which is an index of table.
INT rcPacketPortStatisticsPktCount	1.3.6.1.4.1.8886.6.1.55.1.18.1.3	INTEGER	read-only	The number of the protocol packets on the port.
INT rcPacketPortStatisticsAllPktRatio	1.3.6.1.4.1.8886.6.1.55.1.18.1.4	INTEGER	read-only	The ratio of the protocol packets to all packets on all ports.
INT rcPacketPortStatisticsPortPktRatio	1.3.6.1.4.1.8886.6.1.55.1.18.1.5	INTEGER	read-only	The ratio of the protocol packets to all packets on the port.
rcCpuCachePacketVlanStatisticsTable	1.3.6.1.4.1.8886.6.1.55.1.19		not-accessible	A statistics table of packets based on the vlan.
rcCpuCachePacketVlanStatisticsEntry	1.3.6.1.4.1.8886.6.1.55.1.19.1		not-accessible	Table entry for statistics of the protocol packet based on the vlan.
INT rcPacketVlanStatisticsVlanIndex	1.3.6.1.4.1.8886.6.1.55.1.19.1.1	INTEGER	not-accessible	The vlan id of the packets ,which is an index of table.
INT rcPacketVlanStatisticsProtocolIndex	1.3.6.1.4.1.8886.6.1.55.1.19.1.2	INTEGER	not-accessible	The protocol of the packet ,which is an index of table.
INT rcPacketVlanStatisticsPktCount	1.3.6.1.4.1.8886.6.1.55.1.19.1.3	INTEGER	read-only	The number of the protocol packets on the vlan.
INT rcPacketVlanStatisticsAllPktRatio	1.3.6.1.4.1.8886.6.1.55.1.19.1.4	INTEGER	read-only	The ratio of the protocol packets to all packets on all vlans.
INT rcPacketVlanStatisticsVlanPktRatio	1.3.6.1.4.1.8886.6.1.55.1.19.1.5	INTEGER	read-only	The ratio of the protocol packets to all packets on the vlan.
rcCpuCachePacketAllStatisticsTable	1.3.6.1.4.1.8886.6.1.55.1.20		not-accessible	A statistics table of packets on all ports.
rcCpuCachePacketAllStatisticsEntry	1.3.6.1.4.1.8886.6.1.55.1.20.1		not-accessible	Table entry for statistics of the protocol packets on all ports.
INT rcPacketAllStatisticsProtocolIndex	1.3.6.1.4.1.8886.6.1.55.1.20.1.1	INTEGER	not-accessible	The protocol of the packet ,which is the index of table.
INT rcPacketAllStatisticsPktCount	1.3.6.1.4.1.8886.6.1.55.1.20.1.2	INTEGER	read-only	The number of the protocol packets on all ports.
INT rcPacketAllStatisticsAllPktRatio	1.3.6.1.4.1.8886.6.1.55.1.20.1.3	INTEGER	read-only	The ratio of the protocol packets to all packets on all ports.
OCT rcCpuCachePacketPortList64	1.3.6.1.4.1.8886.6.1.55.1.21	OCTET STRING	read-write	The ports that packets will be collected.It is used when the device has more than 256 ports.

RFC description

Defines managed objects for switch control and configuration protocols (CCP), used in network switching equipment for device management.

Start monitoring Raisecom managed switch cluster (Cluster Configuration Protocol/CPU packet-capture status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SWITCH-CCP-MIB

What Is SWITCH-CCP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description