RAISECOM-GARP-MIB

All MIBs › RAISECOM-GARP-MIB

Organization: Raisecom Technology Co., Ltd.

Last Updated: 2011-07-28

Category: Raisecom Networks

Description: Configures GARP protocol timers and port participation for attribute registration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RAISECOM-GARP-MIB?

RAISECOM-GARP-MIB is a Raisecom enterprise MIB module that manages GARP (Generic Attribute Registration Protocol) along with its application protocols GVRP (GARP VLAN Registration Protocol) and GMRP (GARP Multicast Registration Protocol) on Raisecom switches. It exposes configuration objects for GARP protocol timers (join, leave, leave-all) per port, GVRP global status and maximum VLAN count, and per-port statistics-clear controls for GVRP/GMRP counters. As a monitoring/management resource it is used to track the software configuration state of dynamic VLAN/multicast-group registration (whether GVRP is enabled, current timer values) and to reset accumulated protocol statistics, rather than exposing hardware sensor data. It is closely tied to and dependent on IEEE 802.1D/802.1Q GARP/GVRP/GMRP standards and typically complements the device's VLAN (Q-BRIDGE-MIB) and bridge MIBs for full VLAN topology context. It is deployed on Raisecom access/aggregation switches in metro-Ethernet or enterprise networks that rely on dynamic VLAN and multicast group registration across trunk links. Engineers can download the RAISECOM-GARP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RAISECOM-GARP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Raisecom access/aggregation switch

Monitoring Examples

An administrator would poll raisecomGarpPortTable/raisecomGarpPortEntry to check raisecomGarpPortJoinTime, raisecomGarpPortLeaveTime, and raisecomGarpPortLeaveAllTime per port, confirming GARP timers are consistent across a trunk to avoid VLAN registration flapping. Checking raisecomGvrpStatus and raisecomGvrpMaxVlan confirms whether GVRP is globally enabled and how many VLANs it can dynamically register, while raisecomGvrpPortStatisticClear/raisecomGmrpPortStatisticClear let an operator reset per-port protocol counters after diagnosing a registration storm or misbehaving neighbor switch.

What Can Be Monitored

GARP join/leave/leave-all timers per port
GVRP enable status and max VLAN count
GVRP/GMRP per-port statistics

Imported Objects

From BRIDGE-MIB

dot1dBasePort

OBJECT-TYPE

From P-BRIDGE-MIB

EnabledStatus

From RAISECOM-BASE-MIB

raisecomAgent

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
mib-2

From SNMPv2-TC

MacAddress
RowStatus
TimeInterval
TruthValue

From SWITCH-TC

EnableVar

How to Use in IPNetwork Monitor

Example using raisecomGvrpPortFailedRegistrations OID:

Select a Raisecom access/aggregation switch (GARP/GVRP/GMRP) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type raisecomGvrpPortFailedRegistrations into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of failed GVRP registrations, for any reason, on this port. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
raisecomGarp	1.3.6.1.4.1.8886.1.42			description of garp manage object.
raisecomGarpNotifications	1.3.6.1.4.1.8886.1.42.0
raisecomGarpCommonObjects	1.3.6.1.4.1.8886.1.42.1
raisecomGarpPortTable	1.3.6.1.4.1.8886.1.42.1.1		not-accessible	A table of GARP control information about every bridge port. This is indexed by dot1dBasePort.
raisecomGarpPortEntry	1.3.6.1.4.1.8886.1.42.1.1.1		not-accessible	GARP timer information for a bridge port.
NUM raisecomGarpPortJoinTime	1.3.6.1.4.1.8886.1.42.1.1.1.1	TimeInterval	read-write	The GARP Join time, in centiseconds.
NUM raisecomGarpPortLeaveTime	1.3.6.1.4.1.8886.1.42.1.1.1.2	TimeInterval	read-write	The GARP Leave time, in centiseconds.
NUM raisecomGarpPortLeaveAllTime	1.3.6.1.4.1.8886.1.42.1.1.1.3	TimeInterval	read-write	The GARP LeaveAll time, in centiseconds.
ENA raisecomGarpPortStatisticClear	1.3.6.1.4.1.8886.1.42.1.1.1.4	EnableVar	read-write	Clear garp Statistics informations for this port. Read operation not supported
ENA raisecomGvrpPortStatisticClear	1.3.6.1.4.1.8886.1.42.1.1.1.5	EnableVar	read-write	Clear gvrp Statistics informations for this port. Read operation not supported
ENA raisecomGmrpPortStatisticClear	1.3.6.1.4.1.8886.1.42.1.1.1.6	EnableVar	read-write	Clear gmrp Statistics informations for this port. Read operation not supported
raisecomGarpApplicationObjects	1.3.6.1.4.1.8886.1.42.2
raisecomGvrpObjects	1.3.6.1.4.1.8886.1.42.2.1
ENA raisecomGvrpStatus	1.3.6.1.4.1.8886.1.42.2.1.1	EnabledStatus	read-write	The administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(2), GVRP is disabled on all ports, and all GVRP packets will be forwarded transparently. This object affects all GVRP Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
INT raisecomGvrpMaxVlan	1.3.6.1.4.1.8886.1.42.2.1.2	INTEGER	read-only	The max vlan num this device support.
raisecomGvrpPortTable	1.3.6.1.4.1.8886.1.42.2.1.3		not-accessible	A table of garp for port.
raisecomGvrpPortEntry	1.3.6.1.4.1.8886.1.42.2.1.3.1		not-accessible	Table entry for garp of port statistics.
ENA raisecomGvrpPortStatus	1.3.6.1.4.1.8886.1.42.2.1.3.1.1	EnabledStatus	read-write	The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded, and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
MAC raisecomGvrpPortLastPduOrigin	1.3.6.1.4.1.8886.1.42.2.1.3.1.2	MacAddress	read-only	The Source MAC Address of the last GVRP message received on this port.
C32 raisecomGvrpPortFailedRegistrationsEx	1.3.6.1.4.1.8886.1.42.2.1.3.1.3	Counter32	read-only	The total number of failed GVRP registrations, for any reason, on this port.
T/F raisecomGvrpPortRestrictedVlanRegistration	1.3.6.1.4.1.8886.1.42.2.1.3.1.4	TruthValue	read-write	The state of Restricted VLAN Registration on this port. If the value of this control is true(1), then creation of a new dynamic VLAN entry is permitted only if there is a Static VLAN Registration Entry for the VLAN concerned, in which the Registrar Administrative Control value for this port is Normal Registration. The value of this object MUST be retained across reinitializations of the management system.
INT raisecomGvrpPortRegistrationMode	1.3.6.1.4.1.8886.1.42.2.1.3.1.5	INTEGER	read-write	GVRP registration information. normal:This is the default configuration.Allow create, register and unregister vlans dynamiclly at this port. fixed: Allow create and register vlan manually at this port.Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port.
ENA raisecomGvrpPortRunStatus	1.3.6.1.4.1.8886.1.42.2.1.3.1.6	EnableVar	read-only	It indicates whether the port gvrp function is running.
raisecomGvrpPortStatisticTable	1.3.6.1.4.1.8886.1.42.2.1.4		not-accessible	A table of garp for port statistics.
raisecomGvrpPortStatisticEntry	1.3.6.1.4.1.8886.1.42.2.1.4.1		not-accessible	Table entry for garp of port statistics.
INT raisecomGvrpPortFrameRx	1.3.6.1.4.1.8886.1.42.2.1.4.1.1	INTEGER	read-only	Number of GVRP frames received for this port.
INT raisecomGvrpPortFrameTx	1.3.6.1.4.1.8886.1.42.2.1.4.1.2	INTEGER	read-only	Number of GVRP frames transmitted for this port.
INT raisecomGvrpPortFrameDiscard	1.3.6.1.4.1.8886.1.42.2.1.4.1.3	INTEGER	read-only	Number of discarded GVRP frames for this port.
raisecomGmrpObjects	1.3.6.1.4.1.8886.1.42.2.2
ENA raisecomGmrpStatus	1.3.6.1.4.1.8886.1.42.2.2.1	EnabledStatus	read-write	The administrative status requested by management for GVRP. The value enabled(1) indicates that GMRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(2), GVRP is disabled on all ports, and all GMRP packets will be forwarded transparently. This object affects all GMRP Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
INT raisecomGmrpMaxGroup	1.3.6.1.4.1.8886.1.42.2.2.2	INTEGER	read-only	The max group num this device support.
raisecomGmrpPortTable	1.3.6.1.4.1.8886.1.42.2.2.3		not-accessible	A table of GMRP control and status information about every bridge port. Augments the dot1dBasePortTable.
raisecomGmrpPortEntry	1.3.6.1.4.1.8886.1.42.2.2.3.1		not-accessible	GMRP control and status information for a bridge port.
ENA raisecomGmrpPortStatus	1.3.6.1.4.1.8886.1.42.2.2.3.1.1	EnabledStatus	read-write	The administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs as long as dot1dGmrpStatus is also enabled(1). A value of disabled(2) indicates that GMRP is disabled on this port in all VLANs: any GMRP packets received will be silently discarded, and no GMRP registrations will be propagated from other ports. Setting this to a value of enabled(1) will be stored by the agent but will only take effect on the GMRP protocol operation if dot1dGmrpStatus also indicates the value enabled(1). This object affects all GMRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
C32 raisecomGmrpPortFailedRegistrations	1.3.6.1.4.1.8886.1.42.2.2.3.1.2	Counter32	read-only	The total number of failed GMRP registrations, for any reason, in all VLANs, on this port.
MAC raisecomGmrpPortLastPduOrigin	1.3.6.1.4.1.8886.1.42.2.2.3.1.3	MacAddress	read-only	The Source MAC Address of the last GMRP message received on this port.
T/F raisecomGmrpPortRestrictedGroupRegistration	1.3.6.1.4.1.8886.1.42.2.2.3.1.4	TruthValue	read-write	The state of Restricted Group Registration on this port. If the value of this control is true(1), then creation of a new dynamic entry is permitted only if there is a Static Filtering Entry for the VLAN concerned, in which the Registrar Administrative Control value is Normal Registration. The value of this object MUST be retained across reinitializations of the management system.
INT raisecomGmrpPortRegistrationMode	1.3.6.1.4.1.8886.1.42.2.2.3.1.5	INTEGER	read-write	GMRP registration information. normal:This is the default configuration.Allow create, register and unregister vlans dynamiclly at this port. fixed: Allow create and register group manually at this port.Prevent from unregistering vlans or registering known groups of this port at another trunk port. forbidden: Unregister all groups, forbid to create or register any other groups at this port.
ENA raisecomGmrpPortRunStatus	1.3.6.1.4.1.8886.1.42.2.2.3.1.6	EnableVar	read-only	It indicates whether the port gmrp function is running.
raisecomGmrpPortStatisticTable	1.3.6.1.4.1.8886.1.42.2.2.4		not-accessible	A table of gmrp for port statistics.
raisecomGmrpPortStatisticEntry	1.3.6.1.4.1.8886.1.42.2.2.4.1		not-accessible	Table entry for gmrp of port statistics.
INT raisecomGmrpPortFrameRx	1.3.6.1.4.1.8886.1.42.2.2.4.1.1	INTEGER	read-only	Number of GMRP frames received for this port.
INT raisecomGmrpPortFrameTx	1.3.6.1.4.1.8886.1.42.2.2.4.1.2	INTEGER	read-only	Number of GMRP frames transmitted for this port.
INT raisecomGmrpPortFrameDiscard	1.3.6.1.4.1.8886.1.42.2.2.4.1.3	INTEGER	read-only	Number of discarded GMRP frames for this port.
raisecomGarpConformance	1.3.6.1.4.1.8886.1.42.3

RFC description

Raisecom GARP management MIB providing configuration and monitoring of 802 GARP/GVRP/GMRP protocols on bridge ports.

Start monitoring Raisecom access/aggregation switch (GARP/GVRP/GMRP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RAISECOM-GARP-MIB