RAISECOM-COMMON-MANAGEMENT-MIB

All MIBs › RAISECOM-COMMON-MANAGEMENT-MIB

Organization: RAISECOM TECH, Ltd.

Last Updated: 2004-12-17

Description: Raisecom base system management MIB covering user accounts, clock mode, SNMP notifications, and enable-log authentication for Raisecom network devices

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RAISECOM-COMMON-MANAGEMENT-MIB?

RAISECOM-COMMON-MANAGEMENT-MIB is a vendor-specific base management module for Raisecom telecom access equipment, covering system-wide administrative functions common across the vendor's product line. It exposes configuration data for user accounts, system clock mode and daylight-saving (summer time) settings, SNMP notification enable/disable controls, and enable-mode login authentication logging. Its monitoring value is centered on software/configuration status rather than hardware sensors — confirming the device's clock and DST settings are correct so log/trap timestamps are trustworthy, verifying SNMP traps are enabled so faults will actually be reported, and auditing authentication events for security purposes. As a 'common management' module it underlies device-specific Raisecom MIBs that reference its user/authentication and clock framework. It is deployed across Raisecom's access-network product line, including media converters and Ethernet/optical access switches used by telecom operators, and browsing the module in a RAISECOM-COMMON-MANAGEMENT-MIB MIB Browser session surfaces these clock, authentication, and notification objects that underlie every Raisecom access device.

IPNetwork Monitor allows you to monitor SNMP objects defined in RAISECOM-COMMON-MANAGEMENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Raisecom access-network product line, media converters and Ethernet/optical access switches (common management functions)

Monitoring Examples

An admin would poll raisecomSummerTime to verify a device's daylight-saving configuration is correctly applied, since a misconfigured value would skew timestamps in logs and traps relative to local time. They would also check SNMP notification enable status and enable-log authentication records to confirm alerts are active and to audit privileged logins, catching unauthorized configuration attempts.

What Can Be Monitored

summer time (DST) configuration
system clock mode
user account configuration
SNMP notification/trap enable status
enable-mode authentication log events

Imported Objects

From RAISECOM-BASE-MIB

raisecomAgent

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TimeStamp
TruthValue

From SWITCH-TC

DateAndTime
EnableVar

OIDs

OID symbolic	OID numeric	Type	Access	Description
raisecomCommonManagement	1.3.6.1.4.1.8886.1.2			The MIB module defining objects for common management
raisecomCommonFunctionGroup	1.3.6.1.4.1.8886.1.2.1
INT raisecomConfigLoadOperation	1.3.6.1.4.1.8886.1.2.1.1	INTEGER	read-write	Syetem Load Configuration .Includes to erase the start-up config, or to save the running config.
T/F raisecomConfigLoadNotificationOnCompletion	1.3.6.1.4.1.8886.1.2.1.2	TruthValue	read-write	Specifies whether or not a raisecomConfigLoadOnCompletion notification should be issued on completion of some operation . If such a notification is desired, it is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such a way as to allow the notification to be delivered.
INT raisecomConfigLoadState	1.3.6.1.4.1.8886.1.2.1.3	INTEGER	read-only	Specifies the state of this load configuration.
INT raisecomSystemClock	1.3.6.1.4.1.8886.1.2.1.4	INTEGER	read-write	Seconds elapsed from Jan. 1,1970,same as UNIX TIME.
raisecomConfigLoadMIBTraps	1.3.6.1.4.1.8886.1.2.1.5
NTF raisecomConfigLoadCompletion	1.3.6.1.4.1.8886.1.2.1.5.1			A raisecomConfigLoadeCompletion trap is sent when saving or erasing the configuration file.
ENA raisecomWatchdog	1.3.6.1.4.1.8886.1.2.1.6	EnableVar	read-write	Set/get watchdog status.
INT raisecomClearRunningConfig	1.3.6.1.4.1.8886.1.2.1.7	INTEGER	read-write	the operation to clear running-config
INT raisecomReloadStartupConfig	1.3.6.1.4.1.8886.1.2.1.8	INTEGER	read-write	The operation to reload startup-config file
INT raisecomCfgUpdateState	1.3.6.1.4.1.8886.1.2.1.9	INTEGER	read-write	Specifies the state of this configuration.
INT raisecomCfgUpdateModID	1.3.6.1.4.1.8886.1.2.1.10	INTEGER	read-write	Specifies ID of the module which has updated.
ENA raisecomAutoWritecfgEnable	1.3.6.1.4.1.8886.1.2.1.12	EnableVar	read-write	Set/get auto writing configuration status.
OCT raisecomMibCommandString	1.3.6.1.4.1.8886.1.2.1.13	OCTET STRING	read-write	comnmand string executed by mib user
INT raisecomMibCommandMode	1.3.6.1.4.1.8886.1.2.1.14	INTEGER	read-write	command run on specific mode
INT raisecomMibCommandState	1.3.6.1.4.1.8886.1.2.1.15	INTEGER	read-only	the state of comnmand executed
I32 raisecomAutoWritecfgInterval	1.3.6.1.4.1.8886.1.2.1.16	Integer32	read-write	Interval time of auto save module.
raisecomConfigFileOperationTableGroup	1.3.6.1.4.1.8886.1.2.1.17
raisecomConfigFileOperationTable	1.3.6.1.4.1.8886.1.2.1.17.1		not-accessible	Config file operation table.
raisecomConfigFileOperationEntry	1.3.6.1.4.1.8886.1.2.1.17.1.1		not-accessible	An entry in raisecomConfigFileOperationTable
INT raisecomConfigFileNodeType	1.3.6.1.4.1.8886.1.2.1.17.1.1.1	INTEGER	not-accessible	Config file operation node type.
OCT raisecomConfigFileNodeInfo	1.3.6.1.4.1.8886.1.2.1.17.1.1.2	OCTET STRING	not-accessible	Config file operation node info.
INT raisecomConfigFileOperationType	1.3.6.1.4.1.8886.1.2.1.17.1.1.3	INTEGER	read-write	Config file operation type.
raisecomNotificationGroup	1.3.6.1.4.1.8886.1.2.4
OCT raisecomObjectStatusDesc	1.3.6.1.4.1.8886.1.2.4.1	OCTET STRING	accessible-for-notify	The object status description of the notification currently being sent.
OCT raisecomNotificationDesc	1.3.6.1.4.1.8886.1.2.4.2	OCTET STRING	accessible-for-notify	The description of the notification currently being sent.
OCT raisecomNotificationLevel	1.3.6.1.4.1.8886.1.2.4.3	OCTET STRING	accessible-for-notify	The notification severity level of the notification currently being sent.
OCT raisecomNotificationCategory	1.3.6.1.4.1.8886.1.2.4.4	OCTET STRING	accessible-for-notify	The notification category of the notification currently being sent.such as Environment,Complement
STR raisecomNotificationLocation	1.3.6.1.4.1.8886.1.2.4.101	DisplayString	accessible-for-notify	The description of location which notification generates. This is a display string which can be showned on NMS such like OpenView
raisecomClockGroup	1.3.6.1.4.1.8886.1.2.5
DAT raisecomClockDateAndTime	1.3.6.1.4.1.8886.1.2.5.1	DateAndTime	read-write	The current local date and time for the system. Setting this object is equivalent to setting an automated clock and calendar. The value of the object will track the date and time from the value set. Note that due to hardware limitations some systems may not be able to preserve such meaning across reboots of the system, as indicated by csyClockLostOnReboot. A constant value of all zeros and length 8 indicates the system is not aware of the present date and time. This object may be read-only on some systems.
T/F raisecomClockLostOnReboot	1.3.6.1.4.1.8886.1.2.5.2	TruthValue	read-only	Indication of whether the system can preserve knowledge of current date and time across a system reboot. A value of 'true' indicates the clock must be reset from some external source each time the system reboots. A value of 'false' indicates the system has the ability to keep time across reboots.
raisecomSummerTime	1.3.6.1.4.1.8886.1.2.5.3
ENA raisecomSummerTimeEnable	1.3.6.1.4.1.8886.1.2.5.3.1	EnableVar	read-write	An indication of whether the summertime feature is enabled on this device. When this object is set to enable, then raisecomSummerTimeOffset, raisecomSummerTimeRecurringStart and raisecomSummerTimeRecurringEnd objects are set to default values. When this object is set to disable, then raisecomSummerTimeOffset, raisecomSummerTimeRecurringStart, raisecomSummerTimeRecurringEnd objects are not instantiated and the summertime feature is disabled
INT raisecomSummerTimeOffset	1.3.6.1.4.1.8886.1.2.5.3.2	INTEGER	read-write	The value of this object indicates number of minutes to add or to subtract during summertime. This object is not instantiated when raisecomSummerTimeEnable object is set to disable.
OCT raisecomSummerTimeRecurringStart	1.3.6.1.4.1.8886.1.2.5.3.3	OCTET STRING	read-write	Indicates summertime starts at this time every year. octets contents range 1 week 1..5,ff last = ff 2 day 1..7 where sunday = 1 saturday = 7 4 month 1..12 where january = 1 december = 12 5 hour 0..23 6 min 0..59 For example, the first Monday in Feb at 13:30pm should be given as 01 02 00 02 0e 1e For the last Tuesday in dec at 1:20am should be given as ff 03 00 0c 01 14 This object is not instantiated when raisecomSummerTimeEnable object is set to disable.
OCT raisecomSummerTimeRecurringEnd	1.3.6.1.4.1.8886.1.2.5.3.4	OCTET STRING	read-write	Indicates summertime ends at this time every year. octets contents range 1 week 1..5,ff where ff = last 2-3 day 1..7 where sunday = 1 saturday = 7 4 month 1..12 where january = 1 december = 12 5 hour 0..23 6 min 0..59 For example, the third friday in February at 3:30am should be given as 03 06 00 02 03 1e For the first Tuesday in May at 1:20am should be given as 01 03 00 05 01 14 This object is not instantiated when raisecomSummerTimeEnable object is set to disable.
INT raisecomClockMode	1.3.6.1.4.1.8886.1.2.5.4	INTEGER	read-write	System clock mode, which range from 1 to 3, stands for default mode, timestamp mode and auxiliary clock mode respectively. It allows network administrator to change system clock mechanism by setting this variable. For instance, if administrator intend to use auxiliary clock as system timer, whom is required to set this variable's value as 3, i.e SYSCLK-AUX. All supported values of this variable are listed as follows: 1: SYSCLK-DFLT default mode 2: SYSCLK-TS timestamp mode 3: SYSCLK-AUX auxiliary clock mode.
INT raisecomClockDisplay	1.3.6.1.4.1.8886.1.2.5.5	INTEGER	read-write	System clock display mode, which range from 1 to 3, stands for default mode, UTC mode and other clock mode which is made to prepare for fulture respectively. It allows network administrator to change system clock mechanism by setting this variable. For instance, if administrator intend to use default display mode, the time will be shown as 'yyyy-mm-dd, hh:mm:ss'. else if if administrator intend to use UTC display mode, the time will be shown as'dd.mm.yyyy-hh:mm:ss' All supported values of this variable are listed as follows: 1: EraisecomClockDisplay-DFLT default mode 2: EraisecomClockDisplay-UTC UTC mode 3: EraisecomClockDisplay-other other mode.
OCT raisecomClockTimezoneName	1.3.6.1.4.1.8886.1.2.5.6	OCTET STRING	read-write	The name of the time zone

RFC description

Raisecom root enterprise MIB defining the base OID hierarchy and common managed objects shared across Raisecom network device MIBs.

Start monitoring Raisecom access-network product line, media converters and Ethernet/optical access switches (common management functions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RAISECOM-COMMON-MANAGEMENT-MIB

What Is RAISECOM-COMMON-MANAGEMENT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description