RAISECOM-OAM-MIB

All MIBs › RAISECOM-OAM-MIB

Organization: raisecom

Last Updated: 2006-09-05

Description: Raisecom 802.3ah Ethernet OAM extension MIB for link-loss traps, loopback event logging, and peer OAM entity identification on Raisecom access devices

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RAISECOM-OAM-MIB?

RAISECOM-OAM-MIB is a vendor-specific private MIB from Raisecom focused on managing traps and notifications for Ethernet OAM (802.3ah) events on Raisecom access devices, including link-loss traps, loopback event logging, and peer OAM entity identification. It exposes notification/trap definitions and objects that identify remote OAM peers and log significant OAM events, complementing runtime OAM state exposed elsewhere. Its monitoring purpose is fault detection at the link/software level: alerting operators in near-real time when an Ethernet OAM peer reports a critical link event or when a loopback condition is detected on a monitored link. It builds on and depends on the standard IEEE 802.3ah Ethernet OAM protocol framework for its underlying concepts. It is typically deployed on Raisecom Ethernet demarcation/access devices in carrier and metro-Ethernet networks where OAM-based fault detection is required for SLA compliance. Engineers can download the RAISECOM-OAM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RAISECOM-OAM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Raisecom Ethernet access/demarcation devices

Monitoring Examples

No specific object or table names were captured for this module in the source data, so exact identifiers cannot be cited; conceptually an operator would configure SNMP trap reception for this MIB's OAM notification objects so that a link-loss event or loopback detection on a monitored Ethernet link generates an immediate alert identifying the remote OAM peer involved.

What Can Be Monitored

Ethernet OAM link-loss events
loopback event log
remote OAM peer identification

Imported Objects

From DOT3-OAM-MIB

Dot3Oui
dot3OamEventLogEventTotal	OBJECT-TYPE
dot3OamEventLogLocation	OBJECT-TYPE
dot3OamEventLogOui	OBJECT-TYPE
dot3OamEventLogRunningTotal	OBJECT-TYPE
dot3OamEventLogThresholdHi	OBJECT-TYPE
dot3OamEventLogThresholdLo	OBJECT-TYPE
dot3OamEventLogTimestamp	OBJECT-TYPE
dot3OamEventLogType	OBJECT-TYPE
dot3OamEventLogValue	OBJECT-TYPE
dot3OamEventLogWindowHi	OBJECT-TYPE
dot3OamEventLogWindowLo	OBJECT-TYPE
dot3OamPeerFunctionsSupported	OBJECT-TYPE
dot3OamPeerMacAddress	OBJECT-TYPE
dot3OamPeerVendorInfo	OBJECT-TYPE
dot3OamPeerVendorOui	OBJECT-TYPE

From IF-MIB

ifIndex

OBJECT-TYPE

From RAISECOM-BASE-MIB

draft

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
oam	1.3.6.1.4.1.8886.17.1
raisecomOamMIB	1.3.6.1.4.1.8886.17.1.2			The MIB module for managing trap and notification of oam.
raisecomOamObjects	1.3.6.1.4.1.8886.17.1.2.1
raisecomOamTrapTable	1.3.6.1.4.1.8886.17.1.2.1.1		not-accessible	A table of OAM trap.
raisecomOamTrapEntry	1.3.6.1.4.1.8886.17.1.2.1.1.1		not-accessible	Table entry for OAM trap.
T/F raisecomOamEventTrapEnable	1.3.6.1.4.1.8886.17.1.2.1.1.1.1	TruthValue	read-write	Enable or disable trap for the local normal link events.
T/F raisecomOamPeerEventTrapEnable	1.3.6.1.4.1.8886.17.1.2.1.1.1.2	TruthValue	read-write	Enable or disable trap for the peer normal link events.
U32 raisecomOamDiscoveryTrapTotal	1.3.6.1.4.1.8886.17.1.2.1.1.1.3	Unsigned32	read-only	A running total of the number of times the discovery trap has occurred.
TIM raisecomOamDiscoveryTrapTimestamp	1.3.6.1.4.1.8886.17.1.2.1.1.1.4	TimeStamp	read-only	A timestamp of the last discovery trap.
U32 raisecomOamLostTrapTotal	1.3.6.1.4.1.8886.17.1.2.1.1.1.5	Unsigned32	read-only	A running total of the number of times the peer lost trap has occurred.
TIM raisecomOamLostTrapTimestamp	1.3.6.1.4.1.8886.17.1.2.1.1.1.6	TimeStamp	read-only	A timestamp of the last peer lost trap.
raisecomOamRemoteMgtTable	1.3.6.1.4.1.8886.17.1.2.1.2		not-accessible	A table of OAM trap.
raisecomOamRemoteMgtEntry	1.3.6.1.4.1.8886.17.1.2.1.2.1		not-accessible	Table entry for OAM trap.
INT raisecomOamRemoteMgtBranch	1.3.6.1.4.1.8886.17.1.2.1.2.1.1	INTEGER	read-write	Derived from the CMIP protocol encodings in Annex 30A, Variable Branches may reference attributes, objects or packages.
INT raisecomOamRemoteMgtLeaf	1.3.6.1.4.1.8886.17.1.2.1.2.1.2	INTEGER	read-write	The leaf is derived from the CMIP protocol encodings in Annex 30A
OCT raisecomOamRemoteMgtValue	1.3.6.1.4.1.8886.17.1.2.1.2.1.3	OCTET STRING	read-write	A list of variable widths and values copyed from IEEE802.3ah OAM variable container. It is valid only when raisecomOamRemoteMgtStatus is 0. A single value '0' means error occurred durning OAM mib-get.
INT raisecomOamRemoteMgtStatus	1.3.6.1.4.1.8886.17.1.2.1.2.1.4	INTEGER	read-write	Status of OAM mib get.
raisecomOamTimeoutTable	1.3.6.1.4.1.8886.17.1.2.1.3		not-accessible	A table of OAM loopback timeout parameter.
raisecomOamTimeoutEntry	1.3.6.1.4.1.8886.17.1.2.1.3.1		not-accessible	Table entry for OAM Timeout Table.
I32 raisecomOamLoopbackTimeout	1.3.6.1.4.1.8886.17.1.2.1.3.1.1	Integer32	read-write	This object is used to administrate OAM loopback timeout time.
I32 raisecomOamLoopbackRetryTimes	1.3.6.1.4.1.8886.17.1.2.1.3.1.2	Integer32	read-write	This object is used to to administrate OAM loopback timeout retry times.
raisecomOamLoopbackResultTable	1.3.6.1.4.1.8886.17.1.2.1.4		not-accessible	A table of OAM loopback initiate result.
raisecomOamLoopbackResultEntry	1.3.6.1.4.1.8886.17.1.2.1.4.1		not-accessible	Table entry for OAM loopback initiate result.
INT raisecomOamLoopbackResult	1.3.6.1.4.1.8886.17.1.2.1.4.1.1	INTEGER	read-only	The result of oam initiating loopback.
raisecomOamNotifications	1.3.6.1.4.1.8886.17.1.2.2
NTF raisecomOamDiscoveryTrap	1.3.6.1.4.1.8886.17.1.2.2.1			OAM Discovery Trap
NTF raisecomOamLostTrap	1.3.6.1.4.1.8886.17.1.2.2.2			The OAM peer lost.
NTF raisecomOamNormalTrap	1.3.6.1.4.1.8886.17.1.2.2.3
NTF raisecomOamLoopbackTimeoutTrap	1.3.6.1.4.1.8886.17.1.2.2.4			OAM loopback timeout.
NTF raisecomOamErroredFramePeriodEventTrap	1.3.6.1.4.1.8886.17.1.2.2.5			A raisecomOamErroredFramePeriodEventTrap notification is sent when a local or remote threshold crossing event is detected. A local ErroredFramePeriod event is detected by the local entity,while a remote ErroredFramePeriod event is detected by the reception of an Ethernet OAM Event Notification OAMPDU that indicates a threshold event.
NTF raisecomOamErroredFrameEventTrap	1.3.6.1.4.1.8886.17.1.2.2.6			A raisecomOamErroredFrameEventTrap notification is sent when a local or remote ErroredFrame event is detected. A local ErroredFrame event is detected by the local entity,while a remote ErroredFrame event is detected by the reception of an Ethernet OAM Event Notification OAMPDU that indicates a threshold event.
NTF raisecomOamErroredFrameSecondsEventTrap	1.3.6.1.4.1.8886.17.1.2.2.7			A raisecomOamErroredFrameSecondsEventTrap notification is sent when a local or remote ErroredFrameSeconds event is detected. A local ErroredFrameSeconds event is detected by the local entity,while a remote ErroredFrameSeconds event is detected by the reception of an Ethernet OAM Event Notification OAMPDU that indicates a threshold event.
NTF raisecomOamErroredSymbolEventTrap	1.3.6.1.4.1.8886.17.1.2.2.8			A raisecomOamErroredSymbolEventTrap notification is sent when a local or remote ErroredSymbol event is detected. A local ErroredSymbol event is detected by the local entity,while a remote ErroredSymbol event is detected by the reception of an Ethernet OAM Event Notification OAMPDU that indicates a threshold event.
NTF raisecomOamLinkFaultEventTrap	1.3.6.1.4.1.8886.17.1.2.2.9			A raisecomOamLinkFaultEventTrap notification is sent when a local or remote LinkFault event is detected. A local event is detected by the local entity, while a remote event is detected by the reception of an Ethernet OAM Event Notification OAMPDU that indicates a LinkFault event.
NTF raisecomOamLinkFaultRecoverTrap	1.3.6.1.4.1.8886.17.1.2.2.10
NTF raisecomOamDyingGaspEventTrap	1.3.6.1.4.1.8886.17.1.2.2.11			A raisecomOamDyingGaspEventTrap notification is sent when a remote DyingGasp event is detected. A remote event is detected by the reception of an Ethernet OAM Event Notification OAMPDU that indicates a DyingGasp event.
NTF raisecomOamCriticalEventTrap	1.3.6.1.4.1.8886.17.1.2.2.12			A raisecomOamCriticalEventTrap notification is sent when a local or remote Critical event is detected. A local event is detected by the local entity, while a remote event is detected by the reception of an Ethernet OAM Event Notification OAMPDU that indicates a critical link event.
NTF raisecomOamCriticalRecoverTrap	1.3.6.1.4.1.8886.17.1.2.2.13
raisecomOamScalar	1.3.6.1.4.1.8886.17.1.2.3
I32 raisecomOamSendPeriod	1.3.6.1.4.1.8886.17.1.2.3.1	Integer32	read-write	This object indicates oam pdu send period(in 100ms increments). The default value is 10 (1 second).
I32 raisecomOamLinkTimeout	1.3.6.1.4.1.8886.17.1.2.3.2	Integer32	read-write	This object indicates oam pdu timeout time(in 1s increments).

RFC description

Raisecom vendor-private MIB for Operations, Administration, and Maintenance (OAM) functions; manages network diagnostics and fault detection.

Start monitoring Raisecom Ethernet access/demarcation devices (802.3ah OAM traps/notifications) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RAISECOM-OAM-MIB

What Is RAISECOM-OAM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description