All MIBs › SWITCH-AUTO-CONFIGURATION-MIB
Organization: Raisecom, Inc.
Last Updated: 2009-06-11
Category: Switch Management - Raisecom
Description:
Manages Raisecom switch automatic configuration including ZTP, config download, and provisioning state.
Imported Objects
From RAISECOM-BASE-MIB
| iscomSwitch | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SWITCH-TC
| EnableVar |
What Is SWITCH-AUTO-CONFIGURATION-MIB?
SWITCH-AUTO-CONFIGURATION-MIB is a Raisecom Technology enterprise MIB covering the Auto Config / zero-touch-provisioning (ZTP) upgrade service on Raisecom switches, within the device provisioning/configuration-management area. It exposes software/firmware version-tracking objects (system boot version, bootstrap version, startup configuration version) plus operational controls for enabling auto-configuration and identifying the current file type being processed. This is directly useful for software status monitoring: administrators can confirm which boot/bootstrap/config file versions are active on a device after an automated provisioning event and verify whether auto-config is enabled, helping detect stalled or failed zero-touch provisioning during mass deployment. It likely works alongside standard file-transfer MIBs (e.g., vendor TFTP/FTP download MIBs) that actually deliver the files whose versions this MIB reports. Typical deployment is large-scale Raisecom switch rollouts where NOC staff use ZTP to auto-provision new switches and confirm each unit picked up the correct boot and configuration versions remotely, a workflow where SWITCH-AUTO-CONFIGURATION-MIB SNMP monitoring plays a central role in verifying successful zero-touch provisioning at scale.
IPNetwork Monitor allows you to monitor SNMP objects defined in SWITCH-AUTO-CONFIGURATION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- system boot version
- bootstrap version
- startup configuration version
- auto-config enable state
- current file type being processed
Supported Devices
- Raisecom switches
Monitoring Examples
An administrator provisioning a batch of new switches would poll rcAutoConfigSystemBootVersion, rcAutoConfigBootstrapVersion, and rcAutoConfigStartupConfigVersion after a ZTP event to confirm each device picked up the expected software and configuration versions; a mismatch flags a unit that failed to complete auto-provisioning. Checking rcAutoConfigEnable confirms whether the zero-touch feature is active on that unit, and rcAutoConfigCurrentFileType shows which file type (boot image, bootstrap, or configuration) the device is currently processing, useful for spotting a switch stuck mid-download.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| rcAutoConfig | 1.3.6.1.4.1.8886.6.1.28 | The MIB module for Auto Config upgrade service. | ||
| IP rcAutoConfigTftpServerAddress | 1.3.6.1.4.1.8886.6.1.28.1 | IpAddress | read-write | The object indicates the tftp server address requested of auto upgrade. The configuration of this object would not have effect on the tftp server address obtained from DHCP server. |
| OCT rcAutoConfigFileName | 1.3.6.1.4.1.8886.6.1.28.2 | OCTET STRING | read-write | The object indicates the configuration file name requested of auto upgrade. The configuration of this object would not have effect on the configuration file name obtained from DHCP server. |
| ENA rcAutoConfigStartupEnable | 1.3.6.1.4.1.8886.6.1.28.3 | EnableVar | read-only | The object indicates whether the auto configuration will start while startup. |
| ENA rcAutoConfigOverwriteEnable | 1.3.6.1.4.1.8886.6.1.28.4 | EnableVar | read-write | The object indicates whether overwrite the local configuration file using the server configuration file. |
| ENA rcAutoConfigTrapEnable | 1.3.6.1.4.1.8886.6.1.28.5 | EnableVar | read-write | The object indicates whether sending the trap information or not. |
| INT rcAutoConfigCommand | 1.3.6.1.4.1.8886.6.1.28.6 | INTEGER | read-write | The object indicates the request type of auto upgrade. |
| INT rcAutoConfigOperationStates | 1.3.6.1.4.1.8886.6.1.28.7 | INTEGER | read-only | The object indicates the running states of auto upgrade. |
| INT rcAutoConfigResult | 1.3.6.1.4.1.8886.6.1.28.8 | INTEGER | read-only | The object indicates the result states of auto upgrade. |
| rcAutoConfigTraps | 1.3.6.1.4.1.8886.6.1.28.9 | |||
| NTF rcAutoConfigCompletionTrap | 1.3.6.1.4.1.8886.6.1.28.9.1 | Auto Configuration Completion. | ||
| U32 rcAutoConfigFilenameRule | 1.3.6.1.4.1.8886.6.1.28.10 | Unsigned32 | read-write | The filename rule number |
| OCT rcAutoConfigSystemBootVersion | 1.3.6.1.4.1.8886.6.1.28.11 | OCTET STRING | read-write | version of systerm boot file, format is year-month-day-number.such as 0906031 |
| OCT rcAutoConfigBootstrapVersion | 1.3.6.1.4.1.8886.6.1.28.12 | OCTET STRING | read-write | version of bootstrap file, format is year-month-day-number.such as 0906031 |
| OCT rcAutoConfigStartupConfigVersion | 1.3.6.1.4.1.8886.6.1.28.13 | OCTET STRING | read-write | name of startup config file, format is year-month-day-number.such as 0906031 |
| ENA rcAutoConfigEnable | 1.3.6.1.4.1.8886.6.1.28.14 | EnableVar | read-write | Auto upgrade disable or enable. |
| INT rcAutoConfigCurrentFileType | 1.3.6.1.4.1.8886.6.1.28.15 | INTEGER | read-only | The object indicates the current operate file. |
RFC description
Manages auto-configuration and firmware upgrade services for Raisecom switches via TFTP, including configuration file and startup parameters.
Start monitoring Raisecom switch (zero-touch-provisioning/auto-config boot-version status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.