All MIBs › TIMETRA-OAM-PM-MIB › tmnxOamPmCfgDelayDmmRunTimeLeft
tmnxOamPmCfgDelayDmmRunTimeLeft
Module: TIMETRA-OAM-PM-MIB
OID (symbolic): TIMETRA-OAM-PM-MIB::tmnxOamPmCfgDelayDmmRunTimeLeft
OID (numeric): 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The value of tmnxOamPmCfgDelayDmmRunTimeLeft indicates the run time remaining for the specified session's DMM test. For example, suppose a DMM test has the following configuration: tmnxOamPmCfgSessType tmnxOamPmCfgDelayDmmTestDuration -------------------- -------------------------------- 'onDemand(2)' 1000 (seconds) Then, when the DMM test is started (see tmnxOamPmCfgDelayDmmOnDmndStatus), tmnxOamPmCfgDelayDmmRunTimeLeft is initialized to 1000 seconds. After a minute, tmnxOamPmCfgDelayDmmRunTimeLeft is 940 seconds. If tmnxOamPmCfgSessType is 'proactive(1)', zero is always returned (because a proactive test runs until it is manually stopped). If tmnxOamPmCfgSessType is 'onDemand(2)' and the test is stopped (see tmnxOamPmCfgDelayDmmOnDmndStatus), zero is returned (because the test is not running).
What is tmnxOamPmCfgDelayDmmRunTimeLeft?
Shows how many seconds remain (0-86400) in this session's currently running on-demand DMM test, counting down from the configured tmnxOamPmCfgDelayDmmTestDuration; for example a 1000-second test reads 940 after one minute has elapsed. Always reads zero for a proactive test (which has no bounded duration) or once an on-demand test has stopped.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.8 snmpwalk -v2c -c public <target> TIMETRA-OAM-PM-MIB::tmnxOamPmCfgDelayDmmRunTimeLeft
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.8.1 snmpget -v2c -c public <target> TIMETRA-OAM-PM-MIB::tmnxOamPmCfgDelayDmmRunTimeLeft.1
Start monitoring Nokia SR OS routers (Service OAM delay/loss performance-monitoring session status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-OAM-PM-MIB::tmnxOamPmCfgDelayDmmRunTimeLeft OID value, configure state conditions and alerts, and monitor any Nokia SR OS routers (Service OAM delay/loss performance-monitoring session status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6527 | timetra | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3 | timetraProducts | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1 | tmnxSRMIB | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2 | tmnxSRObjs | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.92 | tmnxOamPmObjs | TIMETRA-OAM-PM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.92.1 | tmnxOamPmCfgObjs | TIMETRA-OAM-PM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.92.1.3 | tmnxOamPmCfgTableObjs | TIMETRA-OAM-PM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.92.1.3.5 | tmnxOamPmCfgDelayDmmTable | TIMETRA-OAM-PM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1 | tmnxOamPmCfgDelayDmmEntry | TIMETRA-OAM-PM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.92.1.3.5.1.8 | tmnxOamPmCfgDelayDmmRunTimeLeft | TIMETRA-OAM-PM-MIB |