All MIBs › TIMETRA-OAM-PM-MIB › tmnxOamPmCfgTwampLtRunTimeLeft
tmnxOamPmCfgTwampLtRunTimeLeft
Module: TIMETRA-OAM-PM-MIB
OID (symbolic): TIMETRA-OAM-PM-MIB::tmnxOamPmCfgTwampLtRunTimeLeft
OID (numeric): 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The value of tmnxOamPmCfgTwampLtRunTimeLeft indicates the run time remaining for the specified session's TWAMP-Light test. For example, suppose a TWAMP-Light test has the following configuration: tmnxOamPmCfgSessType tmnxOamPmCfgTwampLtTestDuration -------------------- ------------------------------- 'onDemand(2)' 1000 (seconds) Then, when the TWAMP-Light test is started (see tmnxOamPmCfgTwampLtOnDmndStatus), tmnxOamPmCfgTwampLtRunTimeLeft is initialized to 1000 seconds. After a minute, tmnxOamPmCfgTwampLtRunTimeLeft is 940 seconds. If tmnxOamPmCfgSessType is 'proactive(1)', zero is always returned (because a proactive test runs until it is manually stopped). If tmnxOamPmCfgSessType is 'onDemand(2)' and the test is stopped (see tmnxOamPmCfgTwampLtOnDmndStatus), zero is returned (because the test is not running).
What is tmnxOamPmCfgTwampLtRunTimeLeft?
Shows how many seconds remain (0-86400) in this session's currently running on-demand TWAMP-Light test, counting down from the configured tmnxOamPmCfgTwampLtTestDuration; for example a 1000-second test reads 940 after one minute has elapsed. Always reads zero for a proactive test or once an on-demand test has stopped.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.8 snmpwalk -v2c -c public <target> TIMETRA-OAM-PM-MIB::tmnxOamPmCfgTwampLtRunTimeLeft
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.8.1 snmpget -v2c -c public <target> TIMETRA-OAM-PM-MIB::tmnxOamPmCfgTwampLtRunTimeLeft.1
Start monitoring Nokia SR OS routers (Service OAM delay/loss performance-monitoring session status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-OAM-PM-MIB::tmnxOamPmCfgTwampLtRunTimeLeft OID value, configure state conditions and alerts, and monitor any Nokia SR OS routers (Service OAM delay/loss performance-monitoring session status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6527 | timetra | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3 | timetraProducts | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1 | tmnxSRMIB | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2 | tmnxSRObjs | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.92 | tmnxOamPmObjs | TIMETRA-OAM-PM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.92.1 | tmnxOamPmCfgObjs | TIMETRA-OAM-PM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.92.1.3 | tmnxOamPmCfgTableObjs | TIMETRA-OAM-PM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.92.1.3.9 | tmnxOamPmCfgTwampLtTable | TIMETRA-OAM-PM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1 | tmnxOamPmCfgTwampLtEntry | TIMETRA-OAM-PM-MIB |
| 1.3.6.1.4.1.6527.3.1.2.92.1.3.9.1.8 | tmnxOamPmCfgTwampLtRunTimeLeft | TIMETRA-OAM-PM-MIB |