TIMETRA-OAM-PM-MIB :: tmnxOamPmCfgLossLmmRunTimeLeft

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TIMETRA-OAM-PM-MIB › tmnxOamPmCfgLossLmmRunTimeLeft

tmnxOamPmCfgLossLmmRunTimeLeft

Module: TIMETRA-OAM-PM-MIB

OID (symbolic): TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRunTimeLeft

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.7

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The value of tmnxOamPmCfgLossLmmRunTimeLeft indicates the run time
remaining for the specified session's LMM test.

For example, suppose an LMM test has the following configuration:

tmnxOamPmCfgSessType   tmnxOamPmCfgLossLmmTestDuration
--------------------   --------------------------------
'onDemand(2)'          1000 (seconds)

Then, when the LMM test is started (see
tmnxOamPmCfgLossLmmOnDmndStatus), tmnxOamPmCfgLossLmmRunTimeLeft is
initialized to 1000 seconds.  After a minute,
tmnxOamPmCfgLossLmmRunTimeLeft is 940 seconds.

If tmnxOamPmCfgSessType is 'proactive(1)', zero is always returned
(because a proactive test runs until it is manually stopped).

If tmnxOamPmCfgSessType is 'onDemand(2)' and the test is stopped (see
tmnxOamPmCfgLossLmmOnDmndStatus), zero is returned (because the test
is not running).

What is tmnxOamPmCfgLossLmmRunTimeLeft?

Shows how many seconds remain (0-86400) in this session's currently running on-demand LMM test, counting down from the configured tmnxOamPmCfgLossLmmTestDuration; for example a 1000-second test reads 940 after one minute has elapsed. Always reads zero for a proactive test or once an on-demand test has stopped.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.7
snmpwalk -v2c -c public <target> TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRunTimeLeft

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.7.1
snmpget -v2c -c public <target> TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRunTimeLeft.1

Start monitoring Nokia SR OS routers (Service OAM delay/loss performance-monitoring session status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRunTimeLeft OID value, configure state conditions and alerts, and monitor any Nokia SR OS routers (Service OAM delay/loss performance-monitoring session status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.92tmnxOamPmObjsTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1tmnxOamPmCfgObjsTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3tmnxOamPmCfgTableObjsTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3.12tmnxOamPmCfgLossLmmTableTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1tmnxOamPmCfgLossLmmEntryTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3.12.1.7tmnxOamPmCfgLossLmmRunTimeLeftTIMETRA-OAM-PM-MIB