TIMETRA-MOBILE-PROFILE-MIB

All MIBs › TIMETRA-MOBILE-PROFILE-MIB

Organization: Alcatel-Lucent

Last Updated: 2009-12-23

Category: Nokia SR OS / Alcatel-Lucent 7750 SR, Subscriber and Mobile Management

Description: Manages Nokia/Alcatel-Lucent 7750 SR mobile subscriber profile parameters and service bindings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIMETRA-MOBILE-PROFILE-MIB?

TIMETRA-MOBILE-PROFILE-MIB is part of Nokia/Alcatel-Lucent's TIMETRA enterprise MIB family, defining subscriber profile and policy parameters for the mobile gateway (GGSN/PDN-GW) functionality on 7750 SR routers. It exposes tmnxMobProfSysTable with per-profile bearer-context limits, activity rate, PDN limits, UE (subscriber) limits, and IPv4 service-data-flow limits. It is used to monitor software capacity status of the mobile packet core: comparing actual session/bearer counts against tmnxMobProfSysBCLimit, BCPdnLimit, and BCUeLimit reveals when a mobile gateway profile is approaching its configured subscriber capacity, ahead of session rejections. It builds on 3GPP mobile-core concepts (PDN, bearer context, UE) layered onto the TIMETRA enterprise MIB tree rather than a separate standard. It is deployed on Alcatel-Lucent/Nokia 7750 SR routers acting as mobile gateways (GGSN/PDN-GW) in mobile operator networks, and mobile-core engineers typically download TIMETRA-MOBILE-PROFILE-MIB as part of the broader TIMETRA MIB package when provisioning SNMP monitoring for a new 7750 SR deployment.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-MOBILE-PROFILE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia/Alcatel-Lucent 7750 SR mobile-gateway platforms, entire SR OS mobile-gateway line (subscriber-profile/bearer capacity status)

Monitoring Examples

An admin would poll tmnxMobProfSysTable and track tmnxMobProfSysBCLimit against real bearer-context counts to catch a profile nearing its configured capacity before new sessions are rejected. tmnxMobProfSysBCUeLimit and tmnxMobProfSysSDFIpv4Limit would be watched together to detect a subscriber profile hitting its UE or IPv4 flow ceiling during a traffic surge. tmnxMobProfSysBCActivtyRate would be reviewed to confirm the profile's activity-rate assumption still matches observed subscriber behavior.

What Can Be Monitored

bearer context limit
bearer context activity rate
PDN limit per profile
UE (subscriber) limit
IPv4 service data flow limit

Imported Objects

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType
InetPortNumber

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From TIMETRA-TC-MIB

TDSCPName
TDSCPValue
TFCName
TIpProtocol
TItemDescription
TNamedItemOrEmpty
TTcpUdpPort
TTcpUdpPortOperator
TmnxAdminState
TmnxEnabledDisabled
TmnxMobArpValue
TmnxMobArpValueOrZero
TmnxMobBufferLimit
TmnxMobChargingProfile
TmnxMobDiaPeerHost
TmnxMobDiaTransTimer
TmnxMobMcc
TmnxMobMccOrEmpty
TmnxMobMnc
TmnxMobMncOrEmpty
TmnxMobProfGbrRate
TmnxMobProfIpTtl
TmnxMobProfMbrRate
TmnxMobProfName
TmnxMobProfNameOrEmpty
TmnxMobProfPolChargingMethod
TmnxMobProfPolMeteringMethod
TmnxMobProfPolReportingLevel
TmnxMobQciValue
TmnxMobQciValueOrZero
TmnxMobQueueLimit
TmnxMobStaticPolPrecedenceOrZero
TmnxTimeInSec
TmnxVRtrID

OIDs

OID symbolic	OID numeric	Type	Access	Description
timetraMobProfileMIBModule	1.3.6.1.4.1.6527.1.1.3.67			This document is the SNMP MIB module to manage and provision the profile and the policy for the mobile gateways. Copyright 2008-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
TMN tmnxMobGtpPriGrpAdminState	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.24	TmnxAdminState	read-create	The value of tmnxMobGtpPriServerAdminState specifies the desired administrative state of this GPRS Tunneling Protocol (GTP) Prime Server Group.
U32 tmnxMobGtpPriGrpCf1Limit	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.19	Unsigned32	read-create	The value of tmnxMobGtpPriGrpCf1Limit specifies the limit (in megabytes) for an amount of memory on the first compact flash that can be used for the Charging Data Records (CDR) storage. Once the threshold has been reached, the system can no longer support accurate charging. If the compact flash is not available then tmnxMobGtpPriGrpCf1Limit will be set to 0. If tmnxMobGtpPriGrpCf1State is enabled and the value of tmnxMobGtpPriGrpCf1Limit is 0, then maximum available memory on the second compact flash can be used for the CDR storage.
T/F tmnxMobGtpPriGrpCf1State	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.18	TruthValue	read-create	The value of tmnxMobGtpPriGrpCf1State specifies whether the first compact flash is enabled to be used for the Charging Data Records (CDR) storage. If the compact flash is not available then it will be disabled.
U32 tmnxMobGtpPriGrpCf2Limit	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.21	Unsigned32	read-create	The value of tmnxMobGtpPriGrpCf2Limit specifies the limit (in megabytes) for an amount of memory on the second compact flash that can be used for the Charging Data Records (CDR) storage. Once the threshold has been reached, the system can no longer support accurate charging. If the compact flash is not available then tmnxMobGtpPriGrpCf2Limit will be set to 0. If tmnxMobGtpPriGrpCf2State is enabled and the value of tmnxMobGtpPriGrpCf2Limit is 0, then maximum available memory on the second compact flash can be used for the CDR storage.
T/F tmnxMobGtpPriGrpCf2State	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.20	TruthValue	read-create	The value of tmnxMobGtpPriGrpCf2State specifies whether the second compact flash is enabled to be used for the Charging Data Record (CDR) storage. If the compact flash is not available then it will be disabled.
T/F tmnxMobGtpPriGrpCpmMemoryState	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.22	TruthValue	read-create	The value of tmnxMobGtpPriGrpCpmMemoryState specifies whether the first compact flash is enabled to be used for the Charging Data Records (CDR) storage. If the compact flash is not available then it will be disabled.
U32 tmnxMobGtpPriGrpDeadtime	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.6	Unsigned32	read-create	The value of tmnxMobGtpPriGrpDeadtime specifies the time that a server should be considered dead before it may be used again.
TIT tmnxMobGtpPriGrpDescription	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.4	TItemDescription	read-create	The value of tmnxMobGtpPriGrpDescription specifies the description string for this GPRS Tunneling Protocol (GTP) Prime Server Group. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
tmnxMobGtpPriGrpEntry	1.3.6.1.4.1.6527.3.1.2.67.1.17.1		not-accessible	Each row entry represents a GPRS Tunneling Protocol (GTP) Prime Server Group defined in the system. Entries can be created and deleted by the user.
U32 tmnxMobGtpPriGrpFileClosureSize	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.13	Unsigned32	read-create	The value of tmnxMobGtpPriGrpFileClosureSize specifies an operator configurable file closure size limit.
U32 tmnxMobGtpPriGrpFileClsLifeTime	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.14	Unsigned32	read-create	The value of tmnxMobGtpPriGrpFileClsLifeTime specifies an operator configurable file closure lifetime. The file is closed after the specified duration.
U32 tmnxMobGtpPriGrpFileClsMaxRecs	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.15	Unsigned32	read-create	The value of tmnxMobGtpPriGrpFileClsMaxRecs specifies an operator configurable limit for the number of Charging Data Records (CDR) that are stored in a file. The file is closed after the specified limit is reached.
STR tmnxMobGtpPriGrpFileExtension	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.12	DisplayString	read-create	The value of tmnxMobGtpPriGrpFileExtension specifies an operator configurable file extension field that is used in the file name.
U32 tmnxMobGtpPriGrpFileObsoleteTime	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.16	Unsigned32	read-create	The value of tmnxMobGtpPriGrpFileObsoleteTime specifies an operator configurable file duration, after which the file is deleted.
TNA tmnxMobGtpPriGrpFilePrivateInfo	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.11	TNamedItemOrEmpty	read-create	The value of tmnxMobGtpPriGrpFilePrivateInfo specifies an operator configurable file private information field that is used in the file name.
NUM tmnxMobGtpPriGrpIfIndex	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.9	InterfaceIndexOrZero	read-create	The value of tmnxMobGtpPriGrpIfIndex specifies the interface index of the local interface used by this GPRS Tunneling Protocol (GTP) Prime Server Group. The interface index at the profile level overrides the interface index at the gateway level.
TMN tmnxMobGtpPriGrpIfVRtrId	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.8	TmnxVRtrID	read-create	The value of tmnxMobGtpPriGrpIfVRtrId specifies the virtual router to which the interface specified by tmnxMobGtpPriGrpIfIndex belongs.
U32 tmnxMobGtpPriGrpInactiveTimer	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.25	Unsigned32	read-create	The value of tmnxMobGtpPriGrpInactiveTimer specifies the amount of time the peer must remain inactive to store all the cached GPRS Tunneling Protocol (GTP) packets in the flash.
TIM tmnxMobGtpPriGrpLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.3	TimeStamp	read-only	The value of tmnxMobGtpPriGrpLastChanged indicates the timestamp of the last change to this row in tmnxMobGtpPriGrpTable.
TMN tmnxMobGtpPriGrpLocalCdrStorage	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.10	TmnxEnabledDisabled	read-create	The value of tmnxMobGtpPriGrpLocalCdrStorage specifies whether local Charging Data Records (CDR) is enabled. The local CDR storage should be be used only if the set of charging gateways are unreachable. However, it is also possible to configure a gtp-prime-group that does not contain any charging-gateways (gtp-prime-servers). In that case the local storage target would be considered the primary option.
U32 tmnxMobGtpPriGrpMaxCdrsPerPdu	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.5	Unsigned32	read-create	The value of tmnxMobGtpPriGrpMaxCdrsPerPdu specifies the maximum number of the Charging Data Records (CDR) that can be placed in a single GTP Prime Server PDU. The number of CDRs will also be bound by the size of the GPRS Tunneling Protocol (GTP) Prime Server PDU.
TMN tmnxMobGtpPriGrpName	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobGtpPriGrpName specifies the unique name of this GPRS Tunneling Protocol (GTP) Prime Server Group.
INT tmnxMobGtpPriGrpPrimaryCf	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.17	INTEGER	read-create	The value of tmnxMobGtpPriGrpPrimaryCf specifies which compact flash will be used as a primary storage for the Charging Data Records (CDR) storage. If the user tries to set the 'cf1' and if the 'cf1' is not available then 'cf2' will be set as primary storage. If the user tries to set the 'cf2' and if 'cf2' is not available then cf1 will be set as primary storage.
U32 tmnxMobGtpPriGrpQueueSize	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.23	Unsigned32	read-create	The value of tmnxMobGtpPriGrpQueueSize specifies the maximum number of unsent GPRS Tunneling Protocol (GTP) packets cached in the Mobile Gateway, waiting for atleast one Charging Gateway Function (CGF) to come up. Once this threshold is reached, all the cached GTP packets are stored in the flash.
T/F tmnxMobGtpPriGrpRedirection	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.7	TruthValue	read-create	The value of tmnxMobGtpPriGrpRedirection specifies whether the GPRS Tunneling Protocol (GTP) Prime Server redirection function is enabled. Enabling the redirection function allows the Charging Gateway Function (CGF) to inform the system when it is about to go out of service and it should cause the system to select a different CGF.
ROW tmnxMobGtpPriGrpRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.17.1.2	RowStatus	read-create	The value of tmnxMobGtpPriGrpRowStatus specifies the row status of this entry. It is used for creation and deletion of this GPRS Tunneling Protocol (GTP) Prime Server Group.
tmnxMobGtpPriGrpTable	1.3.6.1.4.1.6527.3.1.2.67.1.17		not-accessible	The tmnxMobGtpPriGrpTable has an entry for each GPRS Tunneling Protocol (GTP) Prime Server Group configured on the system. It defines GTP prime server parameters.
TIM tmnxMobGtpPriGrpTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.17	TimeStamp	read-only	The value of tmnxMobGtpPriGrpTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobGtpPriGrpTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
IP tmnxMobGtpPriServerAddr	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.6	InetAddress	read-create	The value of tmnxMobGtpPriServerAddr specifies the IP address of the peer for which this entry contains information. If the value of the corresponsding tmnxMobGtpPriServerAddrType is 'dns', then the IP address for this Peer will be obtained via DNS A-Record query. The value of this object cannot be modified once the row has been created.
IPt tmnxMobGtpPriServerAddrType	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.5	InetAddressType	read-create	The value of tmnxMobGtpPriServerAddrType specifies the type of address represented by tmnxMobGtpPriServerAddr. The value of this object cannot be modified once the row has been created.
TMN tmnxMobGtpPriServerAdminState	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.4	TmnxAdminState	read-create	The value of tmnxMobGtpPriServerAdminState specifies the desired administrative state of this GPRS Tunneling Protocol (GTP) primary server.
U32 tmnxMobGtpPriServerEchoInterval	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.10	Unsigned32	read-create	The value of tmnxMobGtpPriServerEchoInterval specifies the interval at which the system should send echo-requests for the GPRS Tunneling Protocol (GTP) Prime Server PDUs used to send the Charging Data Records (CDR).
tmnxMobGtpPriServerEntry	1.3.6.1.4.1.6527.3.1.2.67.1.18.1		not-accessible	Each row entry represents a IP address configured for each GPRS Tunneling Protocol (GTP) Prime Server. Entries can be created and deleted by the user.
U32 tmnxMobGtpPriServerIndex	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.1	Unsigned32	not-accessible	The value of tmnxMobGtpPriServerIndex specifies the unique value which identifies this IP address entry.
TIM tmnxMobGtpPriServerLastChngd	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.3	TimeStamp	read-only	The value of tmnxMobGtpPriServerLastChngd indicates the timestamp of the last change to this row in tmnxMobGtpPriServerTable.
U32 tmnxMobGtpPriServerMaxRequests	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.11	Unsigned32	read-create	The value of tmnxMobGtpPriServerMaxRequests specifies the maximum number of unacknowledged GPRS Tunneling Protocol (GTP) Prime Server PDUs before the system stops sending the Charging Data Records (CDR).
T/F tmnxMobGtpPriServerNodeAlive	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.12	TruthValue	read-create	The value of tmnxMobGtpPriServerNodeAlive specifies whethere the GPRS Tunneling Protocol (GTP) Prime Server node alive mechanism is enabled. This mechanism results in a quicker restart than the echo protocol. This command will also enable the system to respond to Node Alive Requests from the Charging Gateway Function (CGF).
INT tmnxMobGtpPriServerPathProtocol	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.14	INTEGER	read-create	The value of tmnxMobGtpPriServerMaxRequests specifies the path protocol used for the GPRS Tunneling Protocol (GTP) primary server.
INE tmnxMobGtpPriServerPort	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.7	InetPortNumber	read-create	The value of tmnxMobGtpPriServerPort specifies the destination TCP or UDP port number for GTP Prime Server. The value of this object cannot be modified once the row has been created.
U32 tmnxMobGtpPriServerPriority	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.13	Unsigned32	read-create	The value of tmnxMobGtpPriServerPriority specifies the priority of the this GPRS Tunneling Protocol (GTP) primary server.
U32 tmnxMobGtpPriServerRetries	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.8	Unsigned32	read-create	The value of tmnxMobGtpPriServerRetries specifies the number of times the system will attempt to send a GPRS Tunneling Protocol (GTP) Prime Server PDU to a Charging Gateway Function (CGF).
ROW tmnxMobGtpPriServerRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.2	RowStatus	read-create	The value of tmnxMobGtpPriServerRowStatus specifies the row status of this entry. It is used for creation and deletion of this GPRS Tunneling Protocol (GTP) primary server entry. In order for the row creation to succeed, values for tmnxMobGtpPriServerAddrType, tmnxMobGtpPriServerAddr and tmnxMobProfDiaPeerListPort must be included in the same SNMP SET PDU as tmnxMobGtpPriServerRowStatus. Otherwise, the SET request will fail with an 'inconsistentValue' error.
tmnxMobGtpPriServerTable	1.3.6.1.4.1.6527.3.1.2.67.1.18		not-accessible	The tmnxMobGtpPriServerTable has an entry for each GPRS Tunneling Protocol (GTP) Prime Server configured for each GTP Prime Server Group configured on the system.
TIM tmnxMobGtpPriServerTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.18	TimeStamp	read-only	The value of tmnxMobGtpPriServerTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobGtpPriServerTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
U32 tmnxMobGtpPriServerTimeout	1.3.6.1.4.1.6527.3.1.2.67.1.18.1.9	Unsigned32	read-create	The value of tmnxMobGtpPriServerTimeout specifies the interval between GPRS Tunneling Protocol (GTP) Prime Server PDU retries.
tmnxMobProf7xxxV10v0Compl	1.3.6.1.4.1.6527.3.1.1.67.1.3			The compliance statement for management of profiles for the mobile gateways on the Alcatel-Lucent 7750 SROS R10.0.
tmnxMobProfChargingGroup	1.3.6.1.4.1.6527.3.1.1.67.2.6			The group of objects supporting management of the charging profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems.
tmnxMobProfChargingV3Group	1.3.6.1.4.1.6527.3.1.1.67.2.11			The group of objects supporting management of the charging profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems in 3.0 release.
TNA tmnxMobProfChgRuleUnitName	1.3.6.1.4.1.6527.3.1.2.67.1.8.1.5	TNamedItemOrEmpty	read-create	The value of tmnxMobProfChgRuleUnitName specifies the charging rule unit profile.
TMN tmnxMobProfChgUnitChargingMethod	1.3.6.1.4.1.6527.3.1.2.67.1.25.1.7	TmnxMobProfPolChargingMethod	read-create	The value of tmnxMobProfChgUnitChargingMethod specifies the applicable charging method for the service data flow specified in the Policy and Charging Control (PCC) rule.
tmnxMobProfChgUnitEntry	1.3.6.1.4.1.6527.3.1.2.67.1.25.1		not-accessible	Each row entry represents a charging rule unit profile defined in the system. Entries can be created and deleted by the user.
T/F tmnxMobProfChgUnitInUse	1.3.6.1.4.1.6527.3.1.2.67.1.25.1.9	TruthValue	read-only	The value of tmnxMobProfChgUnitInUse specifies if this charging rule unit profile is being used by one of the policy profiles.
TIM tmnxMobProfChgUnitLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.25.1.3	TimeStamp	read-only	The value of tmnxMobProfChgUnitLastChanged indicates the timestamp of the last change to this row in tmnxMobProfChgUnitTable.
TMN tmnxMobProfChgUnitMeteringMethod	1.3.6.1.4.1.6527.3.1.2.67.1.25.1.8	TmnxMobProfPolMeteringMethod	read-create	The value of tmnxMobProfChgUnitMeteringMethod specifies the applicable metering-method for the service data flow specified in the Policy and Charging Control (PCC) rule.
TMN tmnxMobProfChgUnitName	1.3.6.1.4.1.6527.3.1.2.67.1.25.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfChgUnitName specifies the unique name of this charging rule unit profile.
U32 tmnxMobProfChgUnitRatingGroup	1.3.6.1.4.1.6527.3.1.2.67.1.25.1.4	Unsigned32	read-create	The value of tmnxMobProfChgUnitRatingGroup specifies the rating group (charging key) for the Policy and Charging Control (PCC) rule used for rating.
C32 tmnxMobProfChgUnitRefCount	1.3.6.1.4.1.6527.3.1.2.67.1.25.1.10	Counter32	read-only	The value of tmnxMobProfChgUnitRefCount specifies the number of policy profiles referencing this charging rule unit profile.
TMN tmnxMobProfChgUnitReportingLevel	1.3.6.1.4.1.6527.3.1.2.67.1.25.1.6	TmnxMobProfPolReportingLevel	read-create	The value of tmnxMobProfChgUnitReportingLevel specifies the level at which the usage reporting for the Policy and Charging Control (PCC) rule is applicable.
ROW tmnxMobProfChgUnitRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.25.1.2	RowStatus	read-create	The value of tmnxMobProfChgUnitRowStatus specifies the row status of this entry. It is used for creation and deletion of this charging rule unit profile.
U32 tmnxMobProfChgUnitServIdentifier	1.3.6.1.4.1.6527.3.1.2.67.1.25.1.5	Unsigned32	read-create	The value of tmnxMobProfChgUnitServIdentifier specifies the service used for the Policy and Charging Control (PCC) rule.
tmnxMobProfChgUnitTable	1.3.6.1.4.1.6527.3.1.2.67.1.25		not-accessible	The tmnxMobProfChgUnitTable has an entry for each charging rule unit profile configured on the system. Charging rule unit profile defines charging parameters for policy control.
TIM tmnxMobProfChgUnitTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.25	TimeStamp	read-only	The value of tmnxMobProfChgUnitTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfChgUnitTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TMN tmnxMobProfDcca3GppQosNegProf	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.7	TmnxEnabledDisabled	read-create	The value of tmnxMobProfDcca3GppQosNegProf specifies whether the 3GPP-QoS-Negotiated-Profile Attribute Value Pair (AVP) should be included in the Credit Control Request (CCR). Both tmnxMobProfDcca3GppQosNegProf or tmnxMobProfDccaQosInformation can not be enabled at the same time.
U32 tmnxMobProfDccaApplTxTimer	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.5	Unsigned32	read-create	The value of tmnxMobProfDccaApplTxTimer specifies the application transaction timer for Credit Control Request (CCR) and Credit Control Answer (CCA).
INT tmnxMobProfDccaCalledStationId	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.9	INTEGER	read-create	The value of tmnxMobProfDccaCalledStationId specifies whether the real or virtual Access Point Name (APN) is included in the called-station-id Attribute Value Pair (AVP).
TMN tmnxMobProfDccaCcSessFailover	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.10	TmnxEnabledDisabled	read-create	The value of tmnxMobProfDccaCcSessFailover specifies whether the failover to secondary Online Charging System is supported if the primary OCS is not available
INT tmnxMobProfDccaCcSessFlovrHndl	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.11	INTEGER	read-create	The value of tmnxMobProfDccaCcSessFlovrHndl specifies the credit control failure handling on the gateway
U32 tmnxMobProfDccaDefaultQht	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.19	Unsigned32	read-create	The value of tmnxMobProfDccaDefaultQht specifies the default Quota Holding Timer (QHT) that would be applicable when the Online Charging System (OCS) does not specify a QHT. When OCS specifies a QHT, it overrides the default-QHT configured on the gateway.
TIT tmnxMobProfDccaDescription	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.4	TItemDescription	read-create	The value of tmnxMobProfDccaDescription specifies the description string for this Diameter Credit Control Application (DCCA) profile. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
tmnxMobProfDccaEntry	1.3.6.1.4.1.6527.3.1.2.67.1.23.1		not-accessible	Each row entry represents a Diameter Credit Control Application (DCCA) profile defined in the system. Entries can be created and deleted by the user. DCCA profile 'default' is created by the agent itself at system initialization. It cannot be modified or deleted.
U32 tmnxMobProfDccaFhSessContTimer	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.18	Unsigned32	read-create	The value of tmnxMobProfDccaFhSessContTimer specifies the Failure Handling Session Continue timer. When the value of the object tmnxMobProfDccaCcSessFlovrHndl is 'continue', the credit control session is considered closed. However, the service is granted for the configured period of time.
TMN tmnxMobProfDccaFirstPktBehavior	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.20	TmnxEnabledDisabled	read-create	The value of tmnxMobProfDccaFirstPktBehavior specifies the option to enable the behavior to request quota upon detecting a first packet for the corresponding service data flow. Credit Control is on a per Rating Group basis. All Service Data Flow (SDFs) belong to a particular Rating Group consume from the quota allocated for that Rating Group.
TMN tmnxMobProfDccaForcedReAuth	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.12	TmnxMobProfAllowDiscard	read-create	The value of tmnxMobProfDccaForcedReAuth specifies the option to allow or discard the traffic for the service while waiting for a Credit Control Answer (CCA) response message from the Online Charging System (OCS) when a Credit Control Request (CCR) message is sent to the OCS as a result of forced re-authorization by the OCS.
tmnxMobProfDccaGroup	1.3.6.1.4.1.6527.3.1.1.67.2.12			The group of objects supporting management of the Diameter Credit Control Application (DCCA) profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems.
TIM tmnxMobProfDccaLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.3	TimeStamp	read-only	The value of tmnxMobProfDccaLastChanged indicates the timestamp of the last change to this row in tmnxMobProfDccaTable.
TMN tmnxMobProfDccaName	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfDccaName specifies the unique name of this Diameter Credit Control Application (DCCA) profile.
TMN tmnxMobProfDccaQosInformation	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.8	TmnxEnabledDisabled	read-create	The value of tmnxMobProfDccaQosInformation specifies whether the Qos-Information Attribute Value Pair (AVP) should be included in the Credit Control Request (CCR). Both tmnxMobProfDcca3GppQosNegProf or tmnxMobProfDccaQosInformation can not be enabled at the same time.
TMN tmnxMobProfDccaQuotaExNoThrsld	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.13	TmnxMobProfAllowDiscard	read-create	The value of tmnxMobProfDccaQuotaExNoThrsld specifies the option to allow or discard the traffic for the service while waiting for a Credit Control Answer (CCA) response message from the Online Charging System (OCS) when no threshold is active and the quota gets exhausted.
TMN tmnxMobProfDccaQuotaExThrsldAct	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.14	TmnxMobProfAllowDiscard	read-create	The value of tmnxMobProfDccaQuotaExThrsldAct specifies the option to allow or discard the traffic for the service while waiting for a Credit Control Answer (CCA) response message from the Online Charging System (OCS) when the validity timer expires.
TMN tmnxMobProfDccaQuotaUnavail	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.15	TmnxMobProfAllowDiscard	read-create	The value of tmnxMobProfDccaQuotaUnavail specifies the option to allow or discard the traffic for the service while waiting for a Credit Control Answer (CCA) response message from the Online Charging System (OCS) when no quota is available for a Rating Group.
TMN tmnxMobProfDccaRatingCondtChng	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.16	TmnxMobProfAllowDiscard	read-create	The value of tmnxMobProfDccaRatingCondtChng specifies the option to allow or discard the traffic for the service while waiting for a Credit Control Answer (CCA) response message from the Online Charging System (OCS) when a Credit Control Request (CCR) message is sent to the OCS due to the Rating-Condition change being detected and waiting for a Credit Control Answer (CCA) response message from the OCS.
U32 tmnxMobProfDccaRetryCnt	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.6	Unsigned32	read-create	The value of tmnxMobProfDccaRetryCnt specifies the number of times the Credit Control Request (CCR) message will be retransmitted, when Credit Control Answer (CCA) is not received from the Online Charging System (OCS) server.
ROW tmnxMobProfDccaRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.2	RowStatus	read-create	The value of tmnxMobProfDccaRowStatus specifies the row status of this entry. It is used for creation and deletion of this Diameter Credit Control Application (DCCA) profile.
tmnxMobProfDccaTable	1.3.6.1.4.1.6527.3.1.2.67.1.23		not-accessible	The tmnxMobProfDccaTable has an entry for each Diameter Credit Control Application (DCCA) profile configured on the system. DCCA profile defines credit control related parameters for online charging. A maximum of 100 DCCA profiles can be configured in the system.
TIM tmnxMobProfDccaTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.23	TimeStamp	read-only	The value of tmnxMobProfDccaTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfDccaTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxMobProfDccaV4v0Group	1.3.6.1.4.1.6527.3.1.1.67.2.19			The group of objects supporting management of the Diameter Credit Control Application (DCCA) profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems in 4.0 release.
TMN tmnxMobProfDccaValidityTimeExp	1.3.6.1.4.1.6527.3.1.2.67.1.23.1.17	TmnxMobProfAllowDiscard	read-create	The value of tmnxMobProfDccaValidityTimeExp specifies the option to allow or discard the traffic for the service while waiting for a Credit Control Answer (CCA) response message from the Online Charging System (OCS) when there is an active threshold, but the quota gets exhausted while waiting for a CCA upon hitting the threshold.
U32 tmnxMobProfDiaConnTimer	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.6	Unsigned32	read-create	The value of tmnxMobProfDiaConnTimer specifies the maximum amount of time the node attempts to reconnect to a diameter peer after a connection to the peer has been brought down due to a transport failure. There are certain exceptions to this rule, such as peer which terminated the transport connection indicating that it does not wish to communicate. The configuration at peer level overrules the value configured at diameter-base level for the given peer. A value of 0 means that no attempt will be made to re-establish the connection.
TIT tmnxMobProfDiaDescription	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.4	TItemDescription	read-create	The value of tmnxMobProfDiaDescription specifies the description string for this diameter profile. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
U32 tmnxMobProfDiaDnsRefreshInt	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.12	Unsigned32	read-create	The value of tmnxMobProfDiaDnsRefreshInt specifies the amount of time the node waits before sending a Domain Name Server (DNS) query to refresh the Fully Qualified Domain Name (FQDN) resolution to a list of IP addresses. TTL received in a DNS Response is not used at the Gateway. A value of 0 means that the DNS refresh timer is disabled.
U32 tmnxMobProfDiaDprTimeout	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.10	Unsigned32	read-create	The value of tmnxMobProfDiaDprTimeout specifies the amount of time the node waits before re-starting diameter connection setup when remote peer intentionally disconnected by sending Disconnect-Peer-Request (DPR).
tmnxMobProfDiaEntry	1.3.6.1.4.1.6527.3.1.2.67.1.2.1		not-accessible	Each row entry represents a diameter profile defined in the system. Entries can be created and deleted by the user. Diameter profile 'default' is created by the agent itself at system initialization. It cannot be modified or deleted.
TDS tmnxMobProfDiaIpDscp	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.9	TDSCPValue	read-create	The value of tmnxMobProfDiaIpDscp specifies the Differentiated Services Code Point (DSCP) value in the IP header for diameter signaling messages sent. This value can be configured to treat a packet as Network Control (NC) packet ahead of Expedited Forwarding (EF) packets.
TMN tmnxMobProfDiaIpTtl	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.8	TmnxMobProfIpTtl	read-create	The value of tmnxMobProfDiaIpTtl specifies the IP Time-To-Live (TTL) value to be used for diameter signaling messages.
TIM tmnxMobProfDiaLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.3	TimeStamp	read-only	The value of tmnxMobProfDiaLastChanged indicates the timestamp of the last change to this row in tmnxMobProfDiaTable.
tmnxMobProfDiameterGroup	1.3.6.1.4.1.6527.3.1.1.67.2.4			The group of objects supporting management of the diameter profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems.
TMN tmnxMobProfDiaName	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfDiaName specifies the unique name of this diameter profile.
TMN tmnxMobProfDiaPeerAdminState	1.3.6.1.4.1.6527.3.1.2.67.1.4.1.7	TmnxAdminState	read-create	The value of tmnxMobProfDiaPeerAdminState specifies the desired administrative state of this peer.
INT tmnxMobProfDiaPeerApplication	1.3.6.1.4.1.6527.3.1.2.67.1.3.1.11	INTEGER	read-create	The value of tmnxMobProfDiaPeerApplication specifies the type of application where this profile will be used. The names refer to the interfaces between different nodes in the LTE network.
TIT tmnxMobProfDiaPeerDescription	1.3.6.1.4.1.6527.3.1.2.67.1.3.1.4	TItemDescription	read-create	The value of tmnxMobProfDiaPeerDescription specifies the description string for this diameter peer profile. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
TMN tmnxMobProfDiaPeerDestRealm	1.3.6.1.4.1.6527.3.1.2.67.1.3.1.6	TmnxMobDiaPeerHost	read-create	The value of tmnxMobProfDiaPeerDestRealm specifies the destination realm of the diameter peer.
TMN tmnxMobProfDiaPeerDiaProfName	1.3.6.1.4.1.6527.3.1.2.67.1.3.1.5	TmnxMobProfNameOrEmpty	read-create	The value of tmnxMobProfDiaPeerDiaProfName specifies the name of the diameter profile to be associated with this diameter peer profile. Multiple diameter peer profiles can reference the same diameter profile.
tmnxMobProfDiaPeerEntry	1.3.6.1.4.1.6527.3.1.2.67.1.3.1		not-accessible	Each row entry represents a diameter peer profile defined in the system. Entries can be created and deleted by the user.
NUM tmnxMobProfDiaPeerIfIndex	1.3.6.1.4.1.6527.3.1.2.67.1.3.1.10	InterfaceIndexOrZero	read-create	The value of tmnxMobProfDiaPeerIfIndex specifies the interface index of the local interface used by diameter applications.
TMN tmnxMobProfDiaPeerIfVRtrId	1.3.6.1.4.1.6527.3.1.2.67.1.3.1.9	TmnxVRtrID	read-create	The value of tmnxMobProfDiaPeerIfVRtrId specifies the virtual router to which the interface specified by tmnxMobProfDiaPeerIfIndex belongs.
TIM tmnxMobProfDiaPeerLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.3.1.3	TimeStamp	read-only	The value of tmnxMobProfDiaPeerLastChanged indicates the timestamp of the last change to this row in tmnxMobProfDiaPeerTable.
IP tmnxMobProfDiaPeerListAddr	1.3.6.1.4.1.6527.3.1.2.67.1.4.1.5	InetAddress	read-create	The value of tmnxMobProfDiaPeerListAddr specifies the IP address of the peer for which this entry contains information. If the value of the corresponsding tmnxMobProfDiaPeerListAddrType is 'dns', then the IP address for this Peer will be obtained via DNS A-Record query. The value of this object cannot be modified once the row has been created.
IPt tmnxMobProfDiaPeerListAddrType	1.3.6.1.4.1.6527.3.1.2.67.1.4.1.4	InetAddressType	read-create	The value of tmnxMobProfDiaPeerListAddrType specifies the type of address represented by tmnxMobProfDiaPeerListAddr. The value of this object cannot be modified once the row has been created.
tmnxMobProfDiaPeerListEntry	1.3.6.1.4.1.6527.3.1.2.67.1.4.1		not-accessible	Each row entry represents a IP address configured in a diameter peer profile. Entries can be created and deleted by the user.
U32 tmnxMobProfDiaPeerListIndex	1.3.6.1.4.1.6527.3.1.2.67.1.4.1.1	Unsigned32	not-accessible	The value of tmnxMobProfDiaPeerListIndex specifies the unique value which identifies this IP address entry.
TIM tmnxMobProfDiaPeerListLastChngd	1.3.6.1.4.1.6527.3.1.2.67.1.4.1.3	TimeStamp	read-only	The value of tmnxMobProfDiaPeerListLastChngd indicates the timestamp of the last change to this row in tmnxMobProfDiaPeerListTable.
INE tmnxMobProfDiaPeerListPort	1.3.6.1.4.1.6527.3.1.2.67.1.4.1.6	InetPortNumber	read-create	The value of tmnxMobProfDiaPeerListPort specifies the port number for this peer. The value of this object cannot be modified once the row has been created.
ROW tmnxMobProfDiaPeerListRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.4.1.2	RowStatus	read-create	The value of tmnxMobProfDiaPeerListRowStatus specifies the row status of this entry. It is used for creation and deletion of this peer entry. In order for the row creation to succeed, values for tmnxMobProfDiaPeerListAddrType, tmnxMobProfDiaPeerListAddr and tmnxMobProfDiaPeerListPort must be included in the same SNMP SET PDU as tmnxMobProfDiaPeerListRowStatus. Otherwise, the SET request will fail with an 'inconsistentValue' error.
tmnxMobProfDiaPeerListTable	1.3.6.1.4.1.6527.3.1.2.67.1.4		not-accessible	The tmnxMobProfDiaPeerListTable has an entry for each IP address configured in a diameter peer profile. The diameter peer profiles for Gxc and Gx reference points will have exactly one peer address provisioned. A maximum of 20 peers can be configured for each diameter peer profile defined in the system.
TIM tmnxMobProfDiaPeerListTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.4	TimeStamp	read-only	The value of tmnxMobProfDiaPeerListTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfDiaPeerListTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TMN tmnxMobProfDiaPeerLoadBalance	1.3.6.1.4.1.6527.3.1.2.67.1.3.1.8	TmnxEnabledDisabled	read-create	The value of tmnxMobProfDiaPeerLoadBalance specifies if load balanacing is enabled or not. If load balancing is enabled then all the peers will be used in round-robin fashion, otherwise only the first peer will be used for diameter sessions.
TMN tmnxMobProfDiaPeerName	1.3.6.1.4.1.6527.3.1.2.67.1.3.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfDiaPeerName specifies the unique name of this diameter peer profile.
ROW tmnxMobProfDiaPeerRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.3.1.2	RowStatus	read-create	The value of tmnxMobProfDiaPeerRowStatus specifies the row status of this entry. It is used for creation and deletion of this diameter peer profile.
tmnxMobProfDiaPeerTable	1.3.6.1.4.1.6527.3.1.2.67.1.3		not-accessible	The tmnxMobProfDiaPeerTable has an entry for each diameter peer profile configured on the system. Diameter peer profile defines peer related information needed for diameter applications. A maximum of 75 diameter peer profiles can be configured in the system.
TIM tmnxMobProfDiaPeerTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.3	TimeStamp	read-only	The value of tmnxMobProfDiaPeerTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfDiaPeerTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
INT tmnxMobProfDiaPeerTransport	1.3.6.1.4.1.6527.3.1.2.67.1.3.1.7	INTEGER	read-create	The value of tmnxMobProfDiaPeerTransport specifies the type of diameter signaling to be used.
U32 tmnxMobProfDiaPermFailRetryTime	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.11	Unsigned32	read-create	The value of tmnxMobProfDiaPermFailRetryTime specifies the amount of time the node waits before retrying diameter connection setup to start the connection dynamically without operator's intervention incase of permanent failures from the remote peer. A value of 0 means that no attempt will be made to re-establish the connection.
ROW tmnxMobProfDiaRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.2	RowStatus	read-create	The value of tmnxMobProfDiaRowStatus specifies the row status of this entry. It is used for creation and deletion of this diameter profile.
tmnxMobProfDiaTable	1.3.6.1.4.1.6527.3.1.2.67.1.2		not-accessible	The tmnxMobProfDiaTable has an entry for each diameter profile configured on the system. Diameter profile defines diameter connection related parameters. A maximum of 100 diameter profiles can be configured in the system.
TIM tmnxMobProfDiaTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.2	TimeStamp	read-only	The value of tmnxMobProfDiaTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfDiaTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TMN tmnxMobProfDiaTransTimer	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.7	TmnxMobDiaTransTimer	read-create	The value of tmnxMobProfDiaTransTimer specifies the maximum amount of time the node waits for a diameter peer to respond before trying another peer.
U32 tmnxMobProfDiaWatchdgTimer	1.3.6.1.4.1.6527.3.1.2.67.1.2.1.5	Unsigned32	read-create	The value of tmnxMobProfDiaWatchdgTimer specifies the maximum amount of time the node waits for a diameter peer to respond to watchdog packet. When the watchdog timer expires, a Device-Watchdog-Request (DWR) is sent to the diameter peer and the watchdog timer is reset. If a Device-Watchdog-Answer (DWA) is not received before the next expiration of the watchdog timer, transport failure to the Diameter peer has occurred.
tmnxMobProfGlobalGroup	1.3.6.1.4.1.6527.3.1.1.67.2.1			The group of global objects supporting management of profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems.
tmnxMobProfGlobalV3Group	1.3.6.1.4.1.6527.3.1.1.67.2.13			The group of global objects supporting management of profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems in 3.0 release.
tmnxMobProfGroup	1.3.6.1.4.1.6527.3.1.1.67.2.2			The group of objects supporting management of profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems.
TIT tmnxMobProfGtpDescription	1.3.6.1.4.1.6527.3.1.2.67.1.6.1.4	TItemDescription	read-create	The value of tmnxMobProfGtpDescription specifies the description string for this profile. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
tmnxMobProfGtpEntry	1.3.6.1.4.1.6527.3.1.2.67.1.6.1		not-accessible	Each row entry represents a General Packet Radio Services Tunneling Protocol (GTP) profile defined in the system. Entries can be created and deleted by the user. GTP profile 'default' is created by the agent itself at system initialization. It cannot be modified or deleted.
TDS tmnxMobProfGtpIpDscp	1.3.6.1.4.1.6527.3.1.2.67.1.6.1.11	TDSCPValue	read-create	The value of tmnxMobProfGtpIpDscp specifies the Differentiated Services Code Point (DSCP) value in the IP header for General Packet Radio Services Tunneling Protocol (GTP) signaling messages sent. This value can be configured to treat a packet as Network Control (NC) packet ahead of Expedited Forwarding (EF) packets.
TMN tmnxMobProfGtpIpTtl	1.3.6.1.4.1.6527.3.1.2.67.1.6.1.10	TmnxMobProfIpTtl	read-create	The value of tmnxMobProfGtpIpTtl specifies the IP Time-To-Live (TTL) value to be used for General Packet Radio Services Tunneling Protocol (GTP) signaling messages.
TMN tmnxMobProfGtpKeepAlvResp	1.3.6.1.4.1.6527.3.1.2.67.1.6.1.9	TmnxMobProfKeepAliveResponse	read-create	The value of tmnxMobProfGtpKeepAlvResp specifies the time, in seconds, that the Serving gateway (SGW) waits before resending a General Packet Radio Services Tunneling Protocol (GTP) signaling request message when a response to a request has not been received. This time is doubled for every retry.
TMN tmnxMobProfGtpKeepAlvRetryCnt	1.3.6.1.4.1.6527.3.1.2.67.1.6.1.8	TmnxMobProfKeepAliveRetryCount	read-create	The value of tmnxMobProfGtpKeepAlvRetryCnt specifies the maximum number of times that the General Packet Radio Services Tunneling Protocol (GTP) signaling component attempts to send a echo-request message for which there is no reply from the remote peer. Once the retry count reaches the specified value, remote peer will be declared as unreachable.
TMN tmnxMobProfGtpKeepAlvTimeout	1.3.6.1.4.1.6527.3.1.2.67.1.6.1.7	TmnxMobProfKeepAliveTimeout	read-create	The value of tmnxMobProfGtpKeepAlvTimeout specifies the time, in seconds, that the General Packet Radio Services Tunneling Protocol (GTP) signaling component waits for a response from a Mobile Management Entity (MME), and after receiving a response, the number of seconds it waits before sending the next echo-request message.
TIM tmnxMobProfGtpLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.6.1.3	TimeStamp	read-only	The value of tmnxMobProfGtpLastChanged indicates the timestamp of the last change to this row in tmnxMobProfGtpTable.
TMN tmnxMobProfGtpMsgReTxRetryCnt	1.3.6.1.4.1.6527.3.1.2.67.1.6.1.6	TmnxMobProfMsgReTxRetryCount	read-create	The value of tmnxMobProfGtpMsgReTxRetryCnt specifies the number of times the same message is retried before declaring a failed attempt. The value of this object is applicable for GTP-C messaging only.
TMN tmnxMobProfGtpMsgReTxTimeout	1.3.6.1.4.1.6527.3.1.2.67.1.6.1.5	TmnxMobProfMsgReTxTimeout	read-create	The value of tmnxMobProfGtpMsgReTxTimeout specifies the time, in seconds, that the General Packet Radio Services Tunneling Protocol (GTP) signaling component waits for a response from the remote peer before making another transmit request. This applies to all control messages other than keep-alive messages. The value of this object is applicable for GTP-C messaging only.
TMN tmnxMobProfGtpName	1.3.6.1.4.1.6527.3.1.2.67.1.6.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfGtpName specifies the unique name of this General Packet Radio Services Tunneling Protocol (GTP) profile.
tmnxMobProfGtpPrimeServerGroup	1.3.6.1.4.1.6527.3.1.1.67.2.8			The group of objects supporting management of the GPRS Tunneling Protocol (GTP) Prime Server Groups for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems.
ROW tmnxMobProfGtpRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.6.1.2	RowStatus	read-create	The value of tmnxMobProfGtpRowStatus specifies the row status of this entry. It is used for creation and deletion of this General Packet Radio Services Tunneling Protocol (GTP) profile.
tmnxMobProfGtpTable	1.3.6.1.4.1.6527.3.1.2.67.1.6		not-accessible	The tmnxMobProfGtpTable has an entry for each General Packet Radio Services Tunneling Protocol (GTP) profile configured on the system. GTP profile defines GTP signaling related configuration.
TIM tmnxMobProfGtpTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.6	TimeStamp	read-only	The value of tmnxMobProfGtpTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfGtpTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TMN tmnxMobProfHttpRedirctPrecedence	1.3.6.1.4.1.6527.3.1.2.67.1.26.1.4	TmnxMobStaticPolPrecedenceOrZero	read-create	The value of tmnxMobProfHttpRedirctPrecedence specifies the precedence value of this policy rule unit profile.
TIM tmnxMobProfHTTPRedirctTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.26	TimeStamp	read-only	The value of tmnxMobProfHTTPRedirctTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfHTTPRedirectTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxMobProfHTTPRedirectEntry	1.3.6.1.4.1.6527.3.1.2.67.1.26.1		not-accessible	Each row entry represents a HTTP redirect profile defined in the system. Entries can be created and deleted by the user.
TIM tmnxMobProfHttpRedirectLstChgd	1.3.6.1.4.1.6527.3.1.2.67.1.26.1.3	TimeStamp	read-only	The value of tmnxMobProfHttpRedirectLstChgd indicates the timestamp of the last change to this row in tmnxMobProfHTTPRedirectTable.
TMN tmnxMobProfHttpRedirectName	1.3.6.1.4.1.6527.3.1.2.67.1.26.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfHttpRedirectName specifies the name of this HTTP redirect policy.
ROW tmnxMobProfHttpRedirectRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.26.1.2	RowStatus	read-create	The value of tmnxMobProfHttpRedirectRowStatus specifies the row status of this entry. It is used for creation and deletion of this policy profile.
tmnxMobProfHTTPRedirectTable	1.3.6.1.4.1.6527.3.1.2.67.1.26		not-accessible	The tmnxMobProfHTTPRedirectTable has entries for HTTP redirect profiles configured on the system. Each HTTP redirect profile includes multiple policy rule unit profiles which determine the rules to be applied when in re-direct state.
tmnxMobProfile	1.3.6.1.4.1.6527.3.1.2.67
tmnxMobProfileCompliances	1.3.6.1.4.1.6527.3.1.1.67.1
tmnxMobProfileConformance	1.3.6.1.4.1.6527.3.1.1.67
tmnxMobProfileGlobalObjs	1.3.6.1.4.1.6527.3.1.2.67.2
tmnxMobProfileGroups	1.3.6.1.4.1.6527.3.1.1.67.2
tmnxMobProfileObjs	1.3.6.1.4.1.6527.3.1.2.67.1
tmnxMobProfileObsoletedGroup	1.3.6.1.4.1.6527.3.1.1.67.2.17			The group of obsoleted objects which are no longer supported in the 3.0 release on the Alcatel-Lucent 7750 Mobile Gateway Systems.
TIT tmnxMobProfPeerListDescription	1.3.6.1.4.1.6527.3.1.2.67.1.13.1.4	TItemDescription	read-create	The value of tmnxMobProfPeerListDescription specifies the description string for this peer list. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
tmnxMobProfPeerListEntry	1.3.6.1.4.1.6527.3.1.2.67.1.13.1		not-accessible	Each row entry represents a peer list defined in the system. Entries can be created and deleted by the user.
TIM tmnxMobProfPeerListLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.13.1.3	TimeStamp	read-only	The value of tmnxMobProfPeerListLastChanged indicates the timestamp of the last change to this row in tmnxMobProfPeerListTable.
TMN tmnxMobProfPeerListName	1.3.6.1.4.1.6527.3.1.2.67.1.13.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfPeerListName specifies the unique name of this peer list.
IP tmnxMobProfPeerListPeerAddr	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.2	InetAddress	not-accessible	The value of tmnxMobProfPeerListPeerAddr specifies the IP address of the peer. Unlisted IPv4 peer has address value '0.0.0.0' and Unlisted IPv6 peer has address value '0:0:0:0:0:0:0:0'.
IPt tmnxMobProfPeerListPeerAddrType	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.1	InetAddressType	not-accessible	The value of tmnxMobProfPeerListPeerAddrType specifies the type of address represented by tmnxMobProfPeerListPeerAddr.
TMN tmnxMobProfPeerListPeerAdmnState	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.8	TmnxAdminState	read-create	The value of tmnxMobProfPeerListPeerAdmnState specifies the desired administrative state of this peer list.
TIT tmnxMobProfPeerListPeerDesc	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.6	TItemDescription	read-create	The value of tmnxMobProfPeerListPeerDesc specifies the description string for this peer. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
tmnxMobProfPeerListPeerEntry	1.3.6.1.4.1.6527.3.1.2.67.1.14.1		not-accessible	Each row entry represents a peer in the peer list defined in the system. Entries can be created and deleted by the user.
INT tmnxMobProfPeerListPeerForeign	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.10	INTEGER	read-create	The value of tmnxMobProfPeerListPeerForeign specifies the peer as a foreign or a home node. The value 'none' will be set when tmnxMobProfPeerListPeerPlmnMcc and tmnxMobProfPeerListPeerPlmnMnc are specified.
T/F tmnxMobProfPeerListPeerKeepAlive	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.7	TruthValue	read-create	The value of tmnxMobProfPeerListPeerKeepAlive specifies whether the General Packet Radio Services Tunneling Protocol (GTP) echo is enabled for this peer. When the value of this object is set to 'true', communication is made with this peer.
TIM tmnxMobProfPeerListPeerLastChgd	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.5	TimeStamp	read-only	The value of tmnxMobProfPeerListPeerLastChgd indicates the timestamp of the last change to this row in tmnxMobProfPeerListPeerTable.
TMN tmnxMobProfPeerListPeerPlmnMcc	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.11	TmnxMobMccOrEmpty	read-create	The value of tmnxMobProfPeerListPeerPlmnMcc specifies the Mobile Country Code (MCC) portion of the Public Land Mobile Network (PLMN) for this peer. The value of the tmnxMobProfPeerListPeerPlmnMcc will be set as an empty string when tmnxMobProfPeerListPeerForeign is specified.
TMN tmnxMobProfPeerListPeerPlmnMnc	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.12	TmnxMobMncOrEmpty	read-create	The value of tmnxMobProfPeerListPeerPlmnMnc specifies the Mobile Network Code (MNC) portion of the Public Land Mobile Network (PLMN) for this peer. The value of the tmnxMobProfPeerListPeerPlmnMnc will be set as an empty string when tmnxMobProfPeerListPeerForeign is specified.
ADR tmnxMobProfPeerListPeerPrefixLen	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.3	InetAddressPrefixLength	not-accessible	The value of tmnxMobProfPeerListPeerPrefixLen specifies the length of the IP netmask for the IP address represented by tmnxMobProfPeerListPeerAddr. Unlisted peer has prefix length value '0'.
INT tmnxMobProfPeerListPeerRatType	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.9	INTEGER	read-create	The value of tmnxMobGtpPriServerMaxRequests specifies the Radio Access Technology (RAT) type being served by this peer. The RAT type should be used if the RAT type cannot be determined via the General Packet Radio Services Tunneling Protocol (GTP) message itself.
ROW tmnxMobProfPeerListPeerRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.14.1.4	RowStatus	read-create	The value of tmnxMobProfPeerListPeerRowStatus specifies the row status of this entry. It is used for creation and deletion of this policy profile.
tmnxMobProfPeerListPeerTable	1.3.6.1.4.1.6527.3.1.2.67.1.14		not-accessible	The tmnxMobProfPeerListPeerTable has entries for peers in a peer list configured on the system.
TIM tmnxMobProfPeerListPeerTblLtCgd	1.3.6.1.4.1.6527.3.1.2.67.2.14	TimeStamp	read-only	The value of tmnxMobProfPeerListPeerTblLtCgd indicates the sysUpTime at the time of the last modification to tmnxMobProfPeerListPeerTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
ROW tmnxMobProfPeerListRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.13.1.2	RowStatus	read-create	The value of tmnxMobProfPeerListRowStatus specifies the row status of this entry. It is used for creation and deletion of this peer list.
tmnxMobProfPeerListTable	1.3.6.1.4.1.6527.3.1.2.67.1.13		not-accessible	The tmnxMobProfPeerListTable has an entry for each peer list configured in the system. Levels of communication for each peer in the list or unlisted peers can be configured by the user.
TIM tmnxMobProfPeerListTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.13	TimeStamp	read-only	The value of tmnxMobProfPeerListTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfPeerListTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxMobProfPgwChargingEntry	1.3.6.1.4.1.6527.3.1.2.67.1.16.1		not-accessible	Each row entry represents a Packet Data Network Gateway (PGW) charging profile defined in the system. Entries can be created and deleted by the user. PGW charging profile 0 is created by the agent itself at system initialization. It cannot be modified or deleted.
tmnxMobProfPgwChargingTable	1.3.6.1.4.1.6527.3.1.2.67.1.16		not-accessible	The tmnxMobProfPgwChargingTable has an entry for each PGW profile configured on the system. PGW charging profile defines charging parameters for the Packet Data Network Gateway (PGW).
TIM tmnxMobProfPgwChargingTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.16	TimeStamp	read-only	The value of tmnxMobProfPgwChargingTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfPgwChargingTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TMN tmnxMobProfPgwChrgCitQosChange	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.8	TmnxEnabledDisabled	read-create	The value of tmnxMobProfPgwChrgCitQosChange specifies whether the QoS-Change trigger is enabled, which results in List of Traffic Data Volumes container charging information added to the Charging Data Record (CDR) when there is a change in Qos.
TMN tmnxMobProfPgwChrgCitSgwChange	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.13	TmnxEnabledDisabled	read-create	The value of tmnxMobProfPgwChrgCitSgwChange specifies whether the Serving-Node-Change trigger is enabled, which results in List of Traffic Data Volumes container charging information added to the Charging Data Record (CDR) when there is a change in Serving Gateway (SGW).
TMN tmnxMobProfPgwChrgCitTermServDf	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.18	TmnxEnabledDisabled	read-create	The value of tmnxMobProfPgwChrgCitTermServDf specifies whether the termination of service data flow trigger is enabled, which results in List of Traffic Data Volumes container charging information added to the Charging Data Record (CDR) when the service data flow is terminated.
U32 tmnxMobProfPgwChrgCitTimeLmtRg	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.16	Unsigned32	read-create	The value of tmnxMobProfPgwChrgCitTimeLmtRg specifies a time limit (in seconds) applicable per rating group, which results in List of Traffic Data Volumes container charging information added to the Charging Data Record (CDR) when the time limit is reached.
TMN tmnxMobProfPgwChrgCitTrfTimeChng	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.10	TmnxEnabledDisabled	read-create	The value of tmnxMobProfPgwChrgCitTrfTimeChng specifies whether the Tarrif Time Change trigger is enabled, which results in List of Traffic Data Volumes container charging information added to the Charging Data Record (CDR) when there is a change in tarrif time.
TMN tmnxMobProfPgwChrgCitTrfTmEnd	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.12	TmnxTimeInSec	read-create	The value of tmnxMobProfPgwChrgCitTrfTmEnd specifies the end of the Tarrif Time for the Charging Data Record (CDR).
TMN tmnxMobProfPgwChrgCitTrfTmStart	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.11	TmnxTimeInSec	read-create	The value of tmnxMobProfPgwChrgCitTrfTmStart specifies the start of the Tarrif Time for the Charging Data Record (CDR).
TMN tmnxMobProfPgwChrgCitUsrLocChnge	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.9	TmnxEnabledDisabled	read-create	The value of tmnxMobProfPgwChrgCitQosChange specifies whether the User Location Change trigger is enabled, which results in List of Traffic Data Volumes container charging information added to the Charging Data Record (CDR) when there is a change in Qos.
U32 tmnxMobProfPgwChrgCitVolumeLmtRg	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.17	Unsigned32	read-create	The value of tmnxMobProfPgwChrgCitVolumeLmtRg specifies a data volume limit applicable per rating group, which results in List of Traffic Data Volumes container charging information added to the Charging Data Record (CDR) when the volume limit is reached.
TIT tmnxMobProfPgwChrgDesc	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.4	TItemDescription	read-create	The value of tmnxMobProfPgwChrgDesc is a user provided description string for this charging profile for the Packet Data Network Gateway (PGW).
TMN tmnxMobProfPgwChrgGyState	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.25	TmnxEnabledDisabled	read-create	The value of tmnxMobProfPgwChrgGyState specifies whether online charging (Gy) is enabled for this charging profile for the Packet Data Network Gateway (PGW).
TMN tmnxMobProfPgwChrgId	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.1	TmnxMobChargingProfile	not-accessible	The value of tmnxMobProfPgwChrgId uniquely identifies a charging profile configured for the Packet Data Network Gateway (PGW).
TIM tmnxMobProfPgwChrgLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.3	TimeStamp	read-only	The value of tmnxMobProfPgwChrgLastChanged indicates the timestamp of the last change to this row in tmnxMobProfPgwChargingTable.
TMN tmnxMobProfPgwChrgOffLineState	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.5	TmnxEnabledDisabled	read-create	The value of tmnxMobProfPgwChrgOffLineState specifies whether offline charging is enabled for this charging profile for the Packet Data Network Gateway (PGW).
U32 tmnxMobProfPgwChrgPrctMaxChCond	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.21	Unsigned32	read-create	The value of tmnxMobProfPgwChrgPrctMaxChCond specifies the maximum number of change conditions that can occur like tariff change, location change before a partial record is created.
TMN tmnxMobProfPgwChrgPrctMsTmzChnge	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.22	TmnxEnabledDisabled	read-create	The value of tmnxMobProfPgwChrgPrctMsTmzChnge specifies whether the MS Time Zone Change partial record trigger is enabled. Upon encountering a MS Time Zone change, a partial record is created.
TMN tmnxMobProfPgwChrgPrctPlmnChange	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.23	TmnxEnabledDisabled	read-create	The value of tmnxMobProfPgwChrgPrctPlmnChange specifies whether the plmn-change partial record trigger is enabled. Upon encountering a plmn-change, a partial record is created.
TMN tmnxMobProfPgwChrgPrctRatChange	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.24	TmnxEnabledDisabled	read-create	The value of tmnxMobProfPgwChrgPrctRatChange specifies whether the rat-change partial record trigger is enabled. Upon encountering a rat-change, a partial record is created.
U32 tmnxMobProfPgwChrgPrctSrvNdChLmt	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.29	Unsigned32	read-create	The value of tmnxMobProfPgwChrgPrctSrvNdChLmt specifies a maximum limit for the change in Serving Node. A partial record is created when the specified change limit is satisfied for this Partial Record Closure Trigger(PRCT).
U32 tmnxMobProfPgwChrgPrctTimeLmt	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.19	Unsigned32	read-create	The value of tmnxMobProfPgwChrgPrctTimeLmt specifies a time limit (in seconds) applicable per session or bearer depending on the accounting level selected like PDN-level accounting or QCI/bearer-level accounting. A partial record is created when the specified time limit is satisfied.
U32 tmnxMobProfPgwChrgPrctVolumeLmt	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.20	Unsigned32	read-create	The value of tmnxMobProfPgwChrgPrctVolumeLmt specifies a data volume limit applicable per session or bearer depending on the accounting level selected like PDN-level accounting or QCI/bearer-level accounting. A partial record is created when the specified volume limit is satisfied.
TMN tmnxMobProfPgwChrgPriCdfDiaPeer	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.6	TmnxMobProfNameOrEmpty	read-create	The value of tmnxMobProfPgwChrgPriCdfDiaPeer specifies the primary Charging Data Function (CDF) diameter peer profile for this charging profile. If a corresponding diameter peer profile does not exist in tmnxMobProfDiaPeerTable, an 'inconsistentValue' error will be returned.
ROW tmnxMobProfPgwChrgRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.2	RowStatus	read-create	The value of tmnxMobProfPgwChrgRowStatus specifies the row status of this entry. It is used for creation and deletion of this charging profile.
TMN tmnxMobProfPgwChrgSecCdfDiaPeer	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.7	TmnxMobProfNameOrEmpty	read-create	The value of tmnxMobProfPgwChrgSecCdfDiaPeer specifies the secondary Charging Data Function (CDF) diameter peer profile for this charging profile. If a corresponding diameter peer profile does not exist in tmnxMobProfDiaPeerTable, an 'inconsistentValue' error will be returned.
TMN tmnxMobProfPgwGyDccaProf	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.28	TmnxMobProfNameOrEmpty	read-create	The value of tmnxMobProfPgwGyDccaProf specifies Diameter Credit Control Application (DCCA) profile used for the primary and secondary Online Charging System (OCS) for this Online charging (Gy) profile. If a corresponding diameter peer profile does not exist in tmnxMobProfDiaPeerTable, an 'inconsistentValue' error will be returned.
TMN tmnxMobProfPgwGyPriOcsDiaPeer	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.26	TmnxMobProfNameOrEmpty	read-create	The value of tmnxMobProfPgwGyPriOcsDiaPeer specifies the primary Online Charging System (OCS) diameter peer profile for this online charging (Gy) profile. If a corresponding diameter peer profile does not exist in tmnxMobProfDiaPeerTable, an 'inconsistentValue' error will be returned.
TMN tmnxMobProfPgwGySecOcsDiaPeer	1.3.6.1.4.1.6527.3.1.2.67.1.16.1.27	TmnxMobProfNameOrEmpty	read-create	The value of tmnxMobProfPgwGySecOcsDiaPeer specifies the secondary Online Charging System (OCS) diameter peer profile for this online charging (Gy) profile. If a corresponding diameter peer profile does not exist in tmnxMobProfDiaPeerTable, an 'inconsistentValue' error will be returned.
tmnxMobProfPlmnListEntry	1.3.6.1.4.1.6527.3.1.2.67.1.7.1		not-accessible	Each row entry represents a Public Land Mobile Network (PLMN) defined in the system. Entries can be created and deleted by the user.
TMN tmnxMobProfPlmnListMcc	1.3.6.1.4.1.6527.3.1.2.67.1.7.1.2	TmnxMobMcc	not-accessible	The value of tmnxMobProfPlmnListMcc specifies the Mobile Country Code (MCC) of this Public Land Mobile Network (PLMN).
TMN tmnxMobProfPlmnListMnc	1.3.6.1.4.1.6527.3.1.2.67.1.7.1.3	TmnxMobMnc	not-accessible	The value of tmnxMobProfPlmnListMnc specifies the Mobile Network Code (MNC) of this Public Land Mobile Network (PLMN).
TMN tmnxMobProfPlmnListName	1.3.6.1.4.1.6527.3.1.2.67.1.7.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfPlmnListName specifies the name of this Public Land Mobile Network (PLMN) list.
ROW tmnxMobProfPlmnListRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.7.1.4	RowStatus	read-create	The value of tmnxMobProfPlmnListRowStatus specifies the row status of this entry. It is used for creation and deletion of this policy profile.
tmnxMobProfPlmnListTable	1.3.6.1.4.1.6527.3.1.2.67.1.7		not-accessible	The tmnxMobProfPlmnListTable has entries for Public Land Mobile Network (PLMN) lists configured on the system. A PLMN list consists of a list of Mobile Country Code (MCC) and Mobile Network Code (MNC) ids.
TIM tmnxMobProfPlmnListTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.7	TimeStamp	read-only	The value of tmnxMobProfPlmnListTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfPlmnListTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIT tmnxMobProfPmipv6Description	1.3.6.1.4.1.6527.3.1.2.67.1.5.1.4	TItemDescription	read-create	The value of tmnxMobProfPmipv6Description specifies the description string for this profile. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
tmnxMobProfPmipv6Entry	1.3.6.1.4.1.6527.3.1.2.67.1.5.1		not-accessible	Each row entry represents a Proxy Mobile IPv6 (PMIPv6) profile defined in the system. Entries can be created and deleted by the user.
TDS tmnxMobProfPmipv6IpDscp	1.3.6.1.4.1.6527.3.1.2.67.1.5.1.11	TDSCPValue	read-create	The value of tmnxMobProfPmipv6IpDscp specifies the Differentiated Services Code Point (DSCP) value in the IP header for Proxy Mobile IPv6 (PMIPv6) messages sent. This value can be configured to treat a packet as Network Control (NC) packet ahead of Expedited Forwarding (EF) packets.
TMN tmnxMobProfPmipv6IpTtl	1.3.6.1.4.1.6527.3.1.2.67.1.5.1.10	TmnxMobProfIpTtl	read-create	The value of tmnxMobProfPmipv6IpTtl specifies the IP Time-To-Live (TTL) value to be used for Proxy Mobile IPv6 (PMIPv6) messages.
NUM tmnxMobProfPmipv6KeepAlvIntvl	1.3.6.1.4.1.6527.3.1.2.67.1.5.1.9	TmnxMobProfKeepAliveInterval	read-create	The value of tmnxMobProfPmipv6KeepAlvIntvl specifies the interval between the heartbeat messages
TMN tmnxMobProfPmipv6KeepAlvRetryCnt	1.3.6.1.4.1.6527.3.1.2.67.1.5.1.8	TmnxMobProfKeepAliveRetryCount	read-create	The value of tmnxMobProfPmipv6KeepAlvRetryCnt specifies the maximum number of times that the Proxy Mobile IPv6 (PMIPv6) signaling component attempts to send a echo-request message for which there is no reply from the remote peer. Once the retry count reaches the specified value, remote peer will be declared as unreachable.
TMN tmnxMobProfPmipv6KeepAlvTimeout	1.3.6.1.4.1.6527.3.1.2.67.1.5.1.7	TmnxMobProfKeepAliveResponse	read-create	The value of tmnxMobProfPmipv6KeepAlvTimeout specifies the time, in seconds, that the Proxy Mobile IPv6 (PMIPv6) signaling component waits for a response from a Mobile Management Entity (MME), and after receiving a response, the number of seconds it waits before sending the next echo-request message.
TIM tmnxMobProfPmipv6LastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.5.1.3	TimeStamp	read-only	The value of tmnxMobProfPmipv6LastChanged indicates the timestamp of the last change to this row in tmnxMobProfPmipv6Table.
TMN tmnxMobProfPmipv6MsgReTxRetryCnt	1.3.6.1.4.1.6527.3.1.2.67.1.5.1.6	TmnxMobProfMsgReTxRetryCount	read-create	The value of tmnxMobProfPmipv6MsgReTxRetryCnt specifies the number of times the same message is retried before declaring a failed attempt.
TMN tmnxMobProfPmipv6MsgReTxTimeout	1.3.6.1.4.1.6527.3.1.2.67.1.5.1.5	TmnxMobProfMsgReTxTimeout	read-create	The value of tmnxMobProfPmipv6MsgReTxTimeout specifies the time, in seconds, that the Proxy Mobile IPv6 (PMIPv6) signaling component waits for a response from the remote peer before making another transmit request.
TMN tmnxMobProfPmipv6Name	1.3.6.1.4.1.6527.3.1.2.67.1.5.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfPmipv6Name specifies the unique name of this Proxy Mobile IPv6 (PMIPv6) profile.
ROW tmnxMobProfPmipv6RowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.5.1.2	RowStatus	read-create	The value of tmnxMobProfPmipv6RowStatus specifies the row status of this entry. It is used for creation and deletion of this Proxy Mobile IPv6 (PMIPv6) profile.
tmnxMobProfPmipv6Table	1.3.6.1.4.1.6527.3.1.2.67.1.5		not-accessible	The tmnxMobProfPmipv6Table has an entry for each Proxy Mobile IPv6 (PMIPv6) profile configured on the system. PMIPv6 profile defines protocol related information applicable to PMIPv6 peers.
TIM tmnxMobProfPmipv6TblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.5	TimeStamp	read-only	The value of tmnxMobProfPmipv6TblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfPmipv6Table by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxMobProfPmipv6V3Group	1.3.6.1.4.1.6527.3.1.1.67.2.16			The group of objects supporting management of PMIPv6 profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems in 3.0 release.
TMN tmnxMobProfPolArpValue	1.3.6.1.4.1.6527.3.1.2.67.1.8.1.7	TmnxMobArpValueOrZero	read-create	The value of tmnxMobProfPolArpValue specifies the admission control to prioritize allocation and retention for bearer establishment and modification.
C32 tmnxMobProfPolBaseConfRefCount	1.3.6.1.4.1.6527.3.1.2.67.1.10.1.8	Counter32	read-only	The value of tmnxMobProfPolBaseConfRefCount specifies the number of Access Point Name (APN) entries referencing this policy base profile.
tmnxMobProfPolBaseEntry	1.3.6.1.4.1.6527.3.1.2.67.1.10.1		not-accessible	Each row entry represents a policy base profile defined in the system. Entries can be created and deleted by the user. A maximum of 1024 policy base profiles can be configured in the system. A maximum of 8 policy profiles can be configured in a policy base profile.
T/F tmnxMobProfPolBaseInUse	1.3.6.1.4.1.6527.3.1.2.67.1.10.1.6	TruthValue	read-only	The value of tmnxMobProfPolBaseInUse specifies if this policy base profile is being used by one of the sessions.
TIM tmnxMobProfPolBaseLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.10.1.3	TimeStamp	read-only	The value of tmnxMobProfPolBaseLastChanged indicates the timestamp of the last change to this row in tmnxMobProfPolBaseTable.
TMN tmnxMobProfPolBaseName	1.3.6.1.4.1.6527.3.1.2.67.1.10.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfPolBaseName specifies the name of this policy base profile.
T/F tmnxMobProfPolBasePreActivate	1.3.6.1.4.1.6527.3.1.2.67.1.10.1.5	TruthValue	read-create	The value of tmnxMobProfPolBasePreActivate specifies if a dedicated bearer can be pre-activated at the time of User Equipment (UE) attach. Pre-activation of a dedicated bearer is limited to just one additional bearer at the time of UE attach. Only one policy rule within a base policy can have the value of this object set to 'true'.
TMN tmnxMobProfPolBasePrecedence	1.3.6.1.4.1.6527.3.1.2.67.1.10.1.4	TmnxMobStaticPolPrecedenceOrZero	read-create	The value of tmnxMobProfPolBasePrecedence specifies the precedence value of this policy base profile.
C32 tmnxMobProfPolBaseRefCount	1.3.6.1.4.1.6527.3.1.2.67.1.10.1.7	Counter32	read-only	The value of tmnxMobProfPolBaseRefCount specifies the number of sessions referencing this policy base profile.
ROW tmnxMobProfPolBaseRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.10.1.2	RowStatus	read-create	The value of tmnxMobProfPolBaseRowStatus specifies the row status of this entry. It is used for creation and deletion of this policy profile.
tmnxMobProfPolBaseTable	1.3.6.1.4.1.6527.3.1.2.67.1.10		not-accessible	The tmnxMobProfPolBaseTable has entries for policy base profiles configured on the system. Each Policy base profile includes multiple policy profiles associated with a precedence value which is used for matching the User Equipment (UE) IP packets to respective bearers identified by a unique policy profile.
TIM tmnxMobProfPolBaseTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.10	TimeStamp	read-only	The value of tmnxMobProfPolBaseTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfPolBaseTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
C32 tmnxMobProfPolConfRefCount	1.3.6.1.4.1.6527.3.1.2.67.1.8.1.11	Counter32	read-only	The value of tmnxMobProfPolConfRefCount specifies the number of policy rule base entries referencing this policy profile.
tmnxMobProfPolEntry	1.3.6.1.4.1.6527.3.1.2.67.1.8.1		not-accessible	Each row entry represents a policy profile defined in the system. Entries can be created and deleted by the user. A maximum of 1024 policy profiles can be configured in the system.
tmnxMobProfPolicyRulesV31Group	1.3.6.1.4.1.6527.3.1.1.67.2.18			The group of objects supporting management of static policy rules for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems in 3.1 release.
tmnxMobProfPolicyRulesV3Group	1.3.6.1.4.1.6527.3.1.1.67.2.15			The group of objects supporting management of static policy rules for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems in 3.0 release.
T/F tmnxMobProfPolInUse	1.3.6.1.4.1.6527.3.1.2.67.1.8.1.9	TruthValue	read-only	The value of tmnxMobProfPolInUse specifies if this policy profile is being used by one of the sessions.
TIM tmnxMobProfPolLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.8.1.3	TimeStamp	read-only	The value of tmnxMobProfPolLastChanged indicates the timestamp of the last change to this row in tmnxMobProfPolTable.
TMN tmnxMobProfPolName	1.3.6.1.4.1.6527.3.1.2.67.1.8.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfPolName specifies the unique name of this policy profile.
TMN tmnxMobProfPolPrecedence	1.3.6.1.4.1.6527.3.1.2.67.1.8.1.8	TmnxMobStaticPolPrecedenceOrZero	read-create	The value of tmnxMobProfPolPrecedence specifies the precedence value of this policy profile.
TMN tmnxMobProfPolQciValue	1.3.6.1.4.1.6527.3.1.2.67.1.8.1.6	TmnxMobQciValueOrZero	read-create	The value of tmnxMobProfPolQciValue is used as a reference to access a set of node-specific parameters that control bearer level QoS packet forwarding treatment. Internally, this value is mapped to Forwarding Class (FC) within the mobile gateway system.
C32 tmnxMobProfPolRefCount	1.3.6.1.4.1.6527.3.1.2.67.1.8.1.10	Counter32	read-only	The value of tmnxMobProfPolRefCount specifies the number of sessions referencing this policy profile.
ROW tmnxMobProfPolRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.8.1.2	RowStatus	read-create	The value of tmnxMobProfPolRowStatus specifies the row status of this entry. It is used for creation and deletion of this policy profile.
TNA tmnxMobProfPolRuleUnitName	1.3.6.1.4.1.6527.3.1.2.67.1.8.1.4	TNamedItemOrEmpty	read-create	The value of tmnxMobProfPolRuleUnitName specifies the policy rule unit profile.
tmnxMobProfPolTable	1.3.6.1.4.1.6527.3.1.2.67.1.8		not-accessible	The tmnxMobProfPolTable has an entry for each policy profile configured on the system. Policy profile defines QoS parameters for policy control.
TIM tmnxMobProfPolTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.8	TimeStamp	read-only	The value of tmnxMobProfPolTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfPolTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TMN tmnxMobProfPolUnitDwnlinkGbrRate	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.6	TmnxMobProfGbrRate	read-create	The value of tmnxMobProfPolUnitDwnlinkGbrRate specifies the expected downlink Guaranteed Bit Rate (GBR) provided by the GBR bearer.
TMN tmnxMobProfPolUnitDwnlinkMbrRate	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.7	TmnxMobProfMbrRate	read-create	The value of tmnxMobProfPolUnitDwnlinkMbrRate specifies the expected downlink Maximum Bit Rate (MBR) provided by the GBR bearer.
tmnxMobProfPolUnitEntry	1.3.6.1.4.1.6527.3.1.2.67.1.24.1		not-accessible	Each row entry represents a policy rule unit profile defined in the system. Entries can be created and deleted by the user.
TIM tmnxMobProfPolUnitLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.3	TimeStamp	read-only	The value of tmnxMobProfPolUnitLastChanged indicates the timestamp of the last change to this row in tmnxMobProfPolUnitTable.
TMN tmnxMobProfPolUnitName	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfPolUnitName specifies the unique name of this policy rule unit profile.
ROW tmnxMobProfPolUnitRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.2	RowStatus	read-create	The value of tmnxMobProfPolUnitRowStatus specifies the row status of this entry. It is used for creation and deletion of this policy rule unit profile.
tmnxMobProfPolUnitTable	1.3.6.1.4.1.6527.3.1.2.67.1.24		not-accessible	The tmnxMobProfPolUnitTable has an entry for each policy rule unit profile configured on the system. Policy rule unit profile defines QoS parameters for policy control.
TIM tmnxMobProfPolUnitTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.24	TimeStamp	read-only	The value of tmnxMobProfPolUnitTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfPolUnitTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TMN tmnxMobProfPolUnitUplinkGbrRate	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.4	TmnxMobProfGbrRate	read-create	The value of tmnxMobProfPolUnitUplinkGbrRate specifies the expected uplink Guaranteed Bit Rate (GBR) provided by the GBR bearer.
TMN tmnxMobProfPolUnitUplinkMbrRate	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.5	TmnxMobProfMbrRate	read-create	The value of tmnxMobProfPolUnitUplinkMbrRate specifies the expected uplink Maximum Bit Rate (MBR) provided by the GBR bearer.
TIM tmnxMobProfPolUntFlowTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.9	TimeStamp	read-only	The value of tmnxMobProfPolUntFlowTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfPolUntFlwTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TNA tmnxMobProfPolUntFlwAaApp	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.18	TNamedItemOrEmpty	read-create	The value of tmnxMobProfPolUntFlwAaApp specifies the AA application that is associated this policy. If the corresponding AA application is not specified in TIMETRA-BSX-NG-MIB::tmnxBsxAppName, an 'inconsistentValue' error will be returned.
INT tmnxMobProfPolUntFlwDirection	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.4	INTEGER	read-create	The value of tmnxMobProfPolUntFlwDirection specifies the direction of this Service Data Flow (SDF) filter.
tmnxMobProfPolUntFlwEntry	1.3.6.1.4.1.6527.3.1.2.67.1.9.1		not-accessible	Each row entry represents a policy unit flow profile defined in the system. Entries can be created and deleted by the user. A maximum of 15 flow profiles can be configured for each policy base profile.
INT tmnxMobProfPolUntFlwGateStatus	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.8	INTEGER	read-create	The value of tmnxMobProfPolUntFlwGateStatus specifies gating behavior associated with the policy rule unit. If the value of this object is set to 'allowUL', then IP packets that match the flow-description entry will be allowed in the uplink direction. If the value of this object is set to 'allowDL', then IP packets that match the flow-description entry will be allowed in the downlink direction. If the value of this object is set to 'allow', then IP packets that match the flow-description entry will be allowed in both the uplink and downlink directions. If the value of this object is set to 'drop', then IP packets that match the flow-description entry will be dropped in both the uplink and downlink directions. If the value of this object is set to 'autoRedirect', then the subscriber's requests will be redirected to a address specified by the online charging server upon credit expiration. If the value of this object is set to 'redirect' then the subscriber's requests will be redirected to the address specified by 'tmnxMobProfPolUntRedirectAddr' upon credit expiration.
U32 tmnxMobProfPolUntFlwId	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.1	Unsigned32	not-accessible	The value of tmnxMobProfPolUntFlwId specifies the unique id of this policy unit flow profile.
TIM tmnxMobProfPolUntFlwLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.3	TimeStamp	read-only	The value of tmnxMobProfPolUntFlwLastChanged indicates the timestamp of the last change to this row in tmnxMobProfPolUntFlwTable.
IP tmnxMobProfPolUntFlwLclAddr	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.7	InetAddress	read-create	The value of tmnxMobProfPolUntFlwLclAddr specifies the IP address to match the local-ip of the packet.
IPt tmnxMobProfPolUntFlwLclAddrType	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.6	InetAddressType	read-create	The value of tmnxMobProfPolUntFlwLclAddrType specifies the type of address represented by tmnxMobProfPolUntFlwLclAddr.
TTC tmnxMobProfPolUntFlwLclPortOper	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.14	TTcpUdpPortOperator	read-create	The value of tmnxMobProfPolUntFlwLclPortOper specifies the manner in which tmnxMobProfPolUntFlwLclPortVal1 and tmnxMobProfPolUntFlwLclPortVal2 are to be used. The values of these three objects are used as described in TTcpUdpPortOperator.
TTC tmnxMobProfPolUntFlwLclPortVal1	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.12	TTcpUdpPort	read-create	The value of tmnxMobProfPolUntFlwLclPortVal1 specifies the TCP or UDP starting local port. The value of this object is used as per the description for tmnxMobProfPolUntFlwLclPortOper.
TTC tmnxMobProfPolUntFlwLclPortVal2	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.13	TTcpUdpPort	read-create	The value of tmnxMobProfPolUntFlwLclPortVal2 specifies the TCP or UDP ending local port. The value of this object is used as per the description for tmnxMobProfPolUntFlwLclPortOper.
ADR tmnxMobProfPolUntFlwLclPrefixLen	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.8	InetAddressPrefixLength	read-create	The value of tmnxMobProfPolUntFlwLclPrefixLen specifies the mask which is combined with received Local IP address to match address represented by tmnxMobProfPolUntFlwLclAddr.
TIP tmnxMobProfPolUntFlwMatchPrtcl	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.5	TIpProtocol	read-create	The value of tmnxMobProfPolUntFlwMatchPrtcl specifies the IP protocol to match. If the protocol is changed, the protocol specific parameters are reset. The value of tmnxMobProfPolUntFlwMatchPrtcl can not be set to '-1'.
IP tmnxMobProfPolUntFlwRmtAddr	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.10	InetAddress	read-create	The value of tmnxMobProfPolUntFlwRmtAddr specifies the IP address to match the remote-ip of the packet.
IPt tmnxMobProfPolUntFlwRmtAddrType	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.9	InetAddressType	read-create	The value of tmnxMobProfPolUntFlwRmtAddrType specifies the type of address represented by tmnxMobProfPolUntFlwRmtAddr.
TTC tmnxMobProfPolUntFlwRmtPortOper	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.17	TTcpUdpPortOperator	read-create	The value of tmnxMobProfPolUntFlwRmtPortOper specifies the manner in which tmnxMobProfPolUntFlwRmtPortVal1 and tmnxMobProfPolUntFlwRmtPortVal2 are to be used. The values of these three objects are used as described in TTcpUdpPortOperator.
TTC tmnxMobProfPolUntFlwRmtPortVal1	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.15	TTcpUdpPort	read-create	The value of tmnxMobProfPolUntFlwRmtPortVal1 specifies the TCP or UDP starting remote port. The value of this object is used as per the description for tmnxMobProfPolUntFlwRmtPortOper.
TTC tmnxMobProfPolUntFlwRmtPortVal2	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.16	TTcpUdpPort	read-create	The value of tmnxMobProfPolUntFlwRmtPortVal2 specifies the TCP or UDP ending remote port. The value of this object is used as per the description for tmnxMobProfPolUntFlwRmtPortOper.
ADR tmnxMobProfPolUntFlwRmtPrefixLen	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.11	InetAddressPrefixLength	read-create	The value of tmnxMobProfPolUntFlwRmtPrefixLen specifies the mask which is combined with received remote IP address to match address represented by tmnxMobProfPolUntFlwRmtAddr.
ROW tmnxMobProfPolUntFlwRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.9.1.2	RowStatus	read-create	The value of tmnxMobProfPolUntFlwRowStatus specifies the row status of this entry. It is used for creation and deletion of this policy unit flow profile.
tmnxMobProfPolUntFlwTable	1.3.6.1.4.1.6527.3.1.2.67.1.9		not-accessible	The tmnxMobProfPolUntFlwTable has an entry for each policy unit flow profile configured for a policy profile on the system. Policy unit flow profile defines a set of filters identifying a Service Data Flow (SDF).
T/F tmnxMobProfPolUntInUse	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.11	TruthValue	read-only	The value of tmnxMobProfPolUntInUse specifies if this policy rule unit profile is being used by one of the policy profiles.
IP tmnxMobProfPolUntRedirectAddr	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.10	InetAddress	read-create	The value of tmnxMobProfPolUntRedirectAddr specifies the IP address to redirect the http requests to upon credit expiration, when the value of tmnxMobProfPolUntFlwGateStatus is set to 'redirect'. If the value of the corresponding tmnxMobProfPolUntRedirectAdrType is 'dns', then the IP address will be obtained via DNS A-Record query.
IPt tmnxMobProfPolUntRedirectAdrType	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.9	InetAddressType	read-create	The value of tmnxMobProfPolUntRedirectAdrType specifies the type of address represented by tmnxMobProfPolUntRedirectAddr.
C32 tmnxMobProfPolUntRefCount	1.3.6.1.4.1.6527.3.1.2.67.1.24.1.12	Counter32	read-only	The value of tmnxMobProfPolUntRefCount specifies the number of policy profiles referencing this policy rule unit profile.
TIT tmnxMobProfQciPolDescription	1.3.6.1.4.1.6527.3.1.2.67.1.11.1.4	TItemDescription	read-create	The value of tmnxMobProfQciPolDescription specifies the description string for this QCI policy. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
tmnxMobProfQciPolEntry	1.3.6.1.4.1.6527.3.1.2.67.1.11.1		not-accessible	Each row entry represents a QCI policy defined in the system. Entries can be created and deleted by the user. QCI policy profile 'default' is created by the agent itself at system initialization. It cannot be modified or deleted.
tmnxMobProfQciPolicyGroup	1.3.6.1.4.1.6527.3.1.1.67.2.3			The group of objects supporting management of QCI policies for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems.
TIM tmnxMobProfQciPolLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.11.1.3	TimeStamp	read-only	The value of tmnxMobProfQciPolLastChanged indicates the timestamp of the last change to this row in tmnxMobProfQciPolTable.
TMN tmnxMobProfQciPolName	1.3.6.1.4.1.6527.3.1.2.67.1.11.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfQciPolName specifies the unique name of this QCI policy.
TMN tmnxMobProfQciPolQciArpValue	1.3.6.1.4.1.6527.3.1.2.67.1.12.1.2	TmnxMobArpValue	not-accessible	The value of tmnxMobProfQciPolQciArpValue indicates the ARP value.
TDS tmnxMobProfQciPolQciDscp	1.3.6.1.4.1.6527.3.1.2.67.1.12.1.5	TDSCPName	read-write	The value of tmnxMobProfQciPolQciDscp specifies the Differentiated Services Code Point (DSCP) to be used while marking the in-profile packets. Default value for this object is set as follows, depending on the value of tmnxMobProfQciPolQciValue which indicates the QCI value. QCI Value Default value --------- ------------- 1 nc2 2 ef 3 af41 4 nc1 5 af21 6 af11 7 af11 8 cs1 9 be
TDS tmnxMobProfQciPolQciDscpOut	1.3.6.1.4.1.6527.3.1.2.67.1.12.1.6	TDSCPName	read-write	The value of tmnxMobProfQciPolQciDscpOut specifies the DSCP to be used while marking the out-profile packets. Default value for this object is set as follows, depending on the value of tmnxMobProfQciPolQciValue which indicates the QCI value. QCI Value Default value --------- ------------- 1 nc2 2 ef 3 af42 4 nc1 5 af22 6 af12 7 af12 8 cs1 9 be
TMN tmnxMobProfQciPolQciDscpPreserve	1.3.6.1.4.1.6527.3.1.2.67.1.12.1.4	TmnxEnabledDisabled	read-write	The value of tmnxMobProfQciPolQciDscpPreserve specifies if the value of the Differentiated Services Code Point (DSCP) is preserved or not. If the value of this object is set to 'enabled', the DSCP bits are preserved. If the value of this object is set to 'disabled', the DSCP value is specified to tmnxMobProfQciPolQciDscp and tmnxMobProfQciPolQciDscpOut.
tmnxMobProfQciPolQciEntry	1.3.6.1.4.1.6527.3.1.2.67.1.12.1		not-accessible	Each row entry represents a QCI and ARP value for QCI policy defined in the system. Entries in this table are created or deleted by the agent itself when an entry is created or deleted in the tmnxMobProfQciPolTable.
TFC tmnxMobProfQciPolQciFcName	1.3.6.1.4.1.6527.3.1.2.67.1.12.1.7	TFCName	read-write	The value of tmnxMobProfQciPolQciFcName specifies the Forwarding Class (FC) name. Default value for this object is set as follows, depending on the value of tmnxMobProfQciPolQciValue which indicates the QCI value. QCI Value Default value --------- ------------- 1 nc 2 ef 3 h2 4 h1 5 l1 6 af 7 af 8 l2 9 be
TIM tmnxMobProfQciPolQciLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.12.1.3	TimeStamp	read-only	The value of tmnxMobProfQciPolQciLastChanged indicates the timestamp of the last change to this row in tmnxMobProfQciPolQciTable.
INT tmnxMobProfQciPolQciProfile	1.3.6.1.4.1.6527.3.1.2.67.1.12.1.8	INTEGER	read-write	The value of tmnxMobProfQciPolQciProfile specifies the profile to be assigned to the packet. When the value of this object is set to 'applyCir', then policer provided color marking will be used for for the packet.
tmnxMobProfQciPolQciTable	1.3.6.1.4.1.6527.3.1.2.67.1.12		not-accessible	The tmnxMobProfQciPolQciTable has entries for QoS Class Identifier (QCI) and Allocation and Retention Priority (ARP) values for each QCI policy profile configured on the system.
TIM tmnxMobProfQciPolQciTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.12	TimeStamp	read-only	The value of tmnxMobProfQciPolQciTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfQciPolQciTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TMN tmnxMobProfQciPolQciValue	1.3.6.1.4.1.6527.3.1.2.67.1.12.1.1	TmnxMobQciValue	not-accessible	The value of tmnxMobProfQciPolQciValue indicates the QCI value.
ROW tmnxMobProfQciPolRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.11.1.2	RowStatus	read-create	The value of tmnxMobProfQciPolRowStatus specifies the row status of this entry. It is used for creation and deletion of this policy profile. The creation or deletion of an entry in this table causes creation or deletion of corresponding entries in tmnxMobProfQciPolQciTable.
tmnxMobProfQciPolTable	1.3.6.1.4.1.6527.3.1.2.67.1.11		not-accessible	The tmnxMobProfQciPolTable has an entry for each QCI policy profile configured on the system. QoS Class Identifier (QCI) Policy profile defines internal QoS Class Identifier - Differentiated Services Code Point (QCI-DSCP) and QoS Class Identifier - Forwarding Class (QCI-FC) mapping.
TIM tmnxMobProfQciPolTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.11	TimeStamp	read-only	The value of tmnxMobProfQciPolTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfQciPolTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
U32 tmnxMobProfRadAuthProbeInt	1.3.6.1.4.1.6527.3.1.2.67.1.20.1.5	Unsigned32	read-create	The value of tmnxMobProfRadAuthProbeInt specifies the interval at which the system sends authentication probe messages to an authentication server. An authentication probe is a 'fake' Access-Request message for a certain username and password. If the server responds to the Access-Request (even with an Access- Reject), the server will be considered operational. Note that the authentication probe messages will not be sent to the servers that are used for accounting only.
TIT tmnxMobProfRadDescription	1.3.6.1.4.1.6527.3.1.2.67.1.20.1.4	TItemDescription	read-create	The value of tmnxMobProfRadDescription specifies the description string for this profile. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
tmnxMobProfRadEntry	1.3.6.1.4.1.6527.3.1.2.67.1.20.1		not-accessible	Each row entry represents a radius profile defined in the system. Entries can be created and deleted by the user.
INE tmnxMobProfRadGrpAcctServerPort	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.8	InetPortNumber	read-create	The value of tmnxMobProfRadGrpAcctServerPort specifies the listening port on the radius peer for accounting messages.
INE tmnxMobProfRadGrpAuthServerPort	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.7	InetPortNumber	read-create	The value of tmnxMobProfRadGrpAuthServerPort specifies the listening port on the radius peer for authentication messages.
TIT tmnxMobProfRadGrpDescription	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.4	TItemDescription	read-create	The value of tmnxMobProfRadGrpDescription specifies the description string for this profile. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
tmnxMobProfRadGrpEntry	1.3.6.1.4.1.6527.3.1.2.67.1.21.1		not-accessible	Each row entry represents a radius group defined in the system. Entries can be created and deleted by the user.
NUM tmnxMobProfRadGrpIfIndex	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.6	InterfaceIndexOrZero	read-create	The value of tmnxMobProfRadGrpIfIndex specifies the interface index of the local interface used for radius authentication and accounting.
TMN tmnxMobProfRadGrpIfVRtrId	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.5	TmnxVRtrID	read-create	The value of tmnxMobProfRadGrpIfVRtrId specifies the virtual router to which the interface specified by tmnxMobProfRadGrpIfIndex belongs.
T/F tmnxMobProfRadGrpIgnAcctResp	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.13	TruthValue	read-create	The value of tmnxMobProfRadGrpIgnAcctResp specifies whether the mobile gateway will receive responses after sending account start request to multiple radius servers.
U32 tmnxMobProfRadGrpIntUpdateIntvl	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.10	Unsigned32	read-create	The value of tmnxMobProfRadGrpIntUpdateIntvl specifies the time interval, in minutes, for sending interim-update messages to the accounting server.
TIM tmnxMobProfRadGrpLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.3	TimeStamp	read-only	The value of tmnxMobProfRadGrpLastChanged indicates the timestamp of the last change to this row in tmnxMobProfRadGrpTable.
TMN tmnxMobProfRadGrpName	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfRadGrpName specifies the unique name of this radius group.
TMN tmnxMobProfRadGrpRadiusProfile	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.12	TmnxMobProfNameOrEmpty	read-create	The value of tmnxMobProfRadGrpRadiusProfile specifies the radius profile name. If a corresponding radius profile does not exist in the tmnxMobProfRadTable, an 'inconsistentValue' error will be returned.
ROW tmnxMobProfRadGrpRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.2	RowStatus	read-create	The value of tmnxMobProfRadGrpRowStatus specifies the row status of this entry. It is used for creation and deletion of this radius group.
OCT tmnxMobProfRadGrpSecret	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.9	OCTET STRING	read-create	The value of tmnxMobProfRadGrpSecret specifies the shared secret key to be used with the server. The value returned by tmnxMobProfRadGrpSecret is always an empty string.
INT tmnxMobProfRadGrpServerType	1.3.6.1.4.1.6527.3.1.2.67.1.21.1.11	INTEGER	read-create	The value of tmnxMobProfRadGrpServerType specifies the server type for this radius group.
tmnxMobProfRadGrpTable	1.3.6.1.4.1.6527.3.1.2.67.1.21		not-accessible	The tmnxMobProfRadGrpTable has an entry for each radius group configured in the system. Radius group defines parameters applicable to a peer when radius is used for authentication and accounting purposes.
TIM tmnxMobProfRadGrpTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.21	TimeStamp	read-only	The value of tmnxMobProfRadGrpTblLstChgd indicates the sysUpTime at the time of the last modification to the tmnxMobProfRadGrpTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxMobProfRadiusGroup	1.3.6.1.4.1.6527.3.1.1.67.2.10			The group of objects supporting management of the radius profiles for the mobile gateways on the Alcatel 7750 series systems.
TIM tmnxMobProfRadLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.20.1.3	TimeStamp	read-only	The value of tmnxMobProfRadLastChanged indicates the timestamp of the last change to this row in tmnxMobProfRadTable.
TMN tmnxMobProfRadName	1.3.6.1.4.1.6527.3.1.2.67.1.20.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfRadName specifies the unique name of this radius profile.
INE tmnxMobProfRadPeerAcctSvrPort	1.3.6.1.4.1.6527.3.1.2.67.1.22.1.9	InetPortNumber	read-create	The value of tmnxMobProfRadPeerAcctSvrPort specifies the listening port on the radius server for accounting messages.
IP tmnxMobProfRadPeerAddr	1.3.6.1.4.1.6527.3.1.2.67.1.22.1.6	InetAddress	read-create	The value of tmnxMobProfRadPeerAddr specifies the IP address of the server for which this entry contains information. If the value of the corresponsding tmnxMobProfRadPeerAddrType is 'dns', then the IP address for this server will be obtained via DNS A-Record query. The value of this object cannot be modified once the row has been created.
IPt tmnxMobProfRadPeerAddrType	1.3.6.1.4.1.6527.3.1.2.67.1.22.1.5	InetAddressType	read-create	The value of tmnxMobProfRadPeerAddrType specifies the type of address represented by tmnxMobProfRadPeerAddr. The value of this object cannot be modified once the row has been created.
TMN tmnxMobProfRadPeerAdminState	1.3.6.1.4.1.6527.3.1.2.67.1.22.1.4	TmnxAdminState	read-create	The value of tmnxMobProfRadPeerAdminState specifies the desired administrative state of this radius server.
INE tmnxMobProfRadPeerAuthSvrPort	1.3.6.1.4.1.6527.3.1.2.67.1.22.1.8	InetPortNumber	read-create	The value of tmnxMobProfRadPeerAuthSvrPort specifies the listening port on the radius server for authentication messages.
tmnxMobProfRadPeerEntry	1.3.6.1.4.1.6527.3.1.2.67.1.22.1		not-accessible	Each row entry represents an IP address configured for each radius server. Entries can be created and deleted by the user.
U32 tmnxMobProfRadPeerIndex	1.3.6.1.4.1.6527.3.1.2.67.1.22.1.1	Unsigned32	not-accessible	The value of tmnxMobProfRadPeerIndex specifies the unique value which identifies this IP address entry.
TIM tmnxMobProfRadPeerLastChngd	1.3.6.1.4.1.6527.3.1.2.67.1.22.1.3	TimeStamp	read-only	The value of tmnxMobProfRadPeerLastChngd indicates the timestamp of the last change to this row in tmnxMobProfRadPeerTable.
U32 tmnxMobProfRadPeerPriority	1.3.6.1.4.1.6527.3.1.2.67.1.22.1.7	Unsigned32	read-create	The value of tmnxMobProfRadPeerPriority specifies the priority of this server. The value of '3' is considered as the highest priority. The system will attempt to use the highest priority server available at the time. The system will automatically use round-robin load-balancing among servers configured with the same priority.
TMN tmnxMobProfRadPeerRadProfile	1.3.6.1.4.1.6527.3.1.2.67.1.22.1.11	TmnxMobProfNameOrEmpty	read-create	The value of tmnxMobProfRadPeerRadProfile specifies the radius profile name. If a corresponding radius profile does not exist in the tmnxMobProfRadTable, an 'inconsistentValue' error will be returned.
ROW tmnxMobProfRadPeerRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.22.1.2	RowStatus	read-create	The value of tmnxMobProfRadPeerRowStatus specifies the row status of this entry. It is used for the creation and deletion of this radius server entry. In order for the row creation to succeed, values for tmnxMobProfRadPeerAddrType, tmnxMobProfRadPeerAddr must be included in the same SNMP SET PDU as tmnxMobProfRadPeerRowStatus. Otherwise, the SET request will fail with an 'inconsistentValue' error.
OCT tmnxMobProfRadPeerSecret	1.3.6.1.4.1.6527.3.1.2.67.1.22.1.10	OCTET STRING	read-create	The value of tmnxMobProfRadPeerSecret specifies the shared secret key to be used with the server. The value returned by tmnxMobProfRadGrpSecret is always an empty string.
tmnxMobProfRadPeerTable	1.3.6.1.4.1.6527.3.1.2.67.1.22		not-accessible	The tmnxMobProfRadPeerTable has an entry for each radius server configured for each radius group configured on the system.
TIM tmnxMobProfRadPeerTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.22	TimeStamp	read-only	The value of tmnxMobProfRadPeerTblLstChgd indicates the sysUpTime at the time of the last modification to the tmnxMobProfRadPeerTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
U32 tmnxMobProfRadRetryCount	1.3.6.1.4.1.6527.3.1.2.67.1.20.1.8	Unsigned32	read-create	The value of tmnxMobProfRadRetryCount specifies the maximum number of times the system sends a radius message to the server. When this count is reached the server is considered dead and another server is selected.
U32 tmnxMobProfRadRetryTimeout	1.3.6.1.4.1.6527.3.1.2.67.1.20.1.7	Unsigned32	read-create	The value of tmnxMobProfRadRetryTimeout specifies the time, in seconds, to wait before resending a request to which no response has been received.
ROW tmnxMobProfRadRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.20.1.2	RowStatus	read-create	The value of tmnxMobProfRadRowStatus specifies the row status of this entry. It is used for creation and deletion of this radius profile.
U32 tmnxMobProfRadServerDeadTime	1.3.6.1.4.1.6527.3.1.2.67.1.20.1.6	Unsigned32	read-create	The value of tmnxMobProfRadServerDeadTime specifies the time, in seconds, that the server continues to be considered dead before the system will attempt to use it for normal authentication or accounting requests. When the system fails to reach a particular server after a configurable number of retries, the server is marked dead and another server is selected. Note that for the authentication servers, the system will continuously attempt to verify the operational state of the dead server if the auth-probe-interval is set to be non-zero. If the authentication server responds to an auth-probe, the system considers the server to be operational even if the dead timer has not yet expired. Once the dead-timer expires the system may once again send the server authentication or accounting messages. The server is subject to the retry-timeout and retry-count mechanism to determine if the server is still in the failed state. The server-dead-time is ignored if there are no other available servers to use (either because they are not defined or if they are also down). In this case the system will not mark the server as down. Similarly the server-dead-time can be set to 0 so that the server is never marked dead.
tmnxMobProfRadTable	1.3.6.1.4.1.6527.3.1.2.67.1.20		not-accessible	The tmnxMobProfRadTable has an entry for each radius profile configured in the system. Radius profile defines parameters applicable when RADIUS is used for authentication and accounting purposes.
TIM tmnxMobProfRadTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.20	TimeStamp	read-only	The value of tmnxMobProfRadTblLstChgd indicates the sysUpTime at the time of the last modification to the tmnxMobProfRadTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxMobProfSgwChargingEntry	1.3.6.1.4.1.6527.3.1.2.67.1.15.1		not-accessible	Each row entry represents a Serving Gateway (SGW) charging profile defined in the system. Entries can be created and deleted by the user. SGW charging profile 0 is created by the agent itself at system initialization. It cannot be modified or deleted.
tmnxMobProfSgwChargingTable	1.3.6.1.4.1.6527.3.1.2.67.1.15		not-accessible	The tmnxMobProfPolTable has an entry for each SGW profile configured on the system. SGW charging profile defines charging parameters for the Serving Gateway (SGW).
TIM tmnxMobProfSgwChargingTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.15	TimeStamp	read-only	The value of tmnxMobProfPolTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfSgwChargingTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TMN tmnxMobProfSgwChrgCitQosChange	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.8	TmnxEnabledDisabled	read-create	The value of tmnxMobProfSgwChrgCitQosChange specifies whether the QoS-Change trigger is enabled, which results in List of Traffic Data Volumes container charging information added to the Charging Data Record (CDR) when there is a change in Qos.
TMN tmnxMobProfSgwChrgCitSgwChange	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.20	TmnxEnabledDisabled	read-create	The value of tmnxMobProfSgwChrgCitSgwChange specifies whether the Serving-Node-Change trigger is enabled, which results in List of Traffic Data Volumes container charging information added to the Charging Data Record (CDR) when there is a change in Mobility Management Entity (MME). This object was made obsolete in the 3.0 release.
TMN tmnxMobProfSgwChrgCitTrfTimeChng	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.10	TmnxEnabledDisabled	read-create	The value of tmnxMobProfSgwChrgCitTrfTimeChng specifies whether the Tarrif Time Change trigger is enabled, which results in List of Traffic Data Volumes container charging information added to the Charging Data Record (CDR) when there is a change in tarrif time.
TMN tmnxMobProfSgwChrgCitTrfTmEnd	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.12	TmnxTimeInSec	read-create	The value of tmnxMobProfSgwChrgCitTrfTmEnd specifies the end of the Tarrif Time for the Charging Data Record (CDR).
TMN tmnxMobProfSgwChrgCitTrfTmStart	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.11	TmnxTimeInSec	read-create	The value of tmnxMobProfSgwChrgCitTrfTmStart specifies the start of the Tarrif Time for the Charging Data Record (CDR).
TMN tmnxMobProfSgwChrgCitUsrLocChnge	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.9	TmnxEnabledDisabled	read-create	The value of tmnxMobProfSgwChrgCitQosChange specifies whether the User Location Change trigger is enabled, which results in List of Traffic Data Volumes container charging information added to the Charging Data Record (CDR) when there is a change in Qos.
TIT tmnxMobProfSgwChrgDesc	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.4	TItemDescription	read-create	The value of tmnxMobProfSgwChrgDesc is a user provided description string for this charging profile for the Serving Gateway (SGW). It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
TMN tmnxMobProfSgwChrgId	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.1	TmnxMobChargingProfile	not-accessible	The value of tmnxMobProfSgwChrgId uniquely identifies a charging profile configured for the Serving Gateway (SGW).
TIM tmnxMobProfSgwChrgLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.3	TimeStamp	read-only	The value of tmnxMobProfSgwChrgLastChanged indicates the timestamp of the last change to this row in tmnxMobProfSgwChargingTable.
TMN tmnxMobProfSgwChrgOffLineState	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.5	TmnxEnabledDisabled	read-create	The value of tmnxMobProfSgwChrgOffLineState specifies whether offline charging is enabled for this charging profile for the Serving Gateway (SGW).
U32 tmnxMobProfSgwChrgPrctMaxChCond	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.15	Unsigned32	read-create	The value of tmnxMobProfSgwChrgPrctMaxChCond specifies the maximum number of change conditions that can occur like tariff change, location change before a partial record is created.
TMN tmnxMobProfSgwChrgPrctMgmtInterv	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.19	TmnxEnabledDisabled	read-create	The value of tmnxMobProfSgwChrgPrctMgmtInterv specifies whether the management intervention partial record trigger is enabled. Upon management intervention, a partial record is created.
TMN tmnxMobProfSgwChrgPrctMsTmzChnge	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.16	TmnxEnabledDisabled	read-create	The value of tmnxMobProfSgwChrgPrctMsTmzChnge specifies whether the MS Time Zone Change partial record trigger is enabled. Upon encountering a MS Time Zone change, a partial record is created.
TMN tmnxMobProfSgwChrgPrctPlmnChange	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.17	TmnxEnabledDisabled	read-create	The value of tmnxMobProfSgwChrgPrctPlmnChange specifies whether the plmn-change partial record trigger is enabled. Upon encountering a plmn-change, a partial record is created.
TMN tmnxMobProfSgwChrgPrctRatChange	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.18	TmnxEnabledDisabled	read-create	The value of tmnxMobProfSgwChrgPrctRatChange specifies whether the rat-change partial record trigger is enabled. Upon encountering a rat-change, a partial record is created.
U32 tmnxMobProfSgwChrgPrctSrvNdChLmt	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.21	Unsigned32	read-create	The value of tmnxMobProfSgwChrgPrctSrvNdChLmt specifies a maximum limit for the change in Serving Node. A partial record is created when the specified change limit is satisfied for this Partial Record Closure Trigger(PRCT).
U32 tmnxMobProfSgwChrgPrctTimeLmt	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.13	Unsigned32	read-create	The value of tmnxMobProfSgwChrgPrctTimeLmt specifies a time limit (in seconds) applicable per session or bearer depending on the accounting level selected like PDN-level accounting or QCI/bearer-level accounting. A partial record is created when the specified time limit is satisfied.
U32 tmnxMobProfSgwChrgPrctVolumeLmt	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.14	Unsigned32	read-create	The value of tmnxMobProfSgwChrgPrctVolumeLmt specifies a data volume limit applicable per session or bearer depending on the accounting level selected like PDN-level accounting or QCI/bearer-level accounting. A partial record is created when the specified volume limit is satisfied.
TMN tmnxMobProfSgwChrgPriCdfDiaPeer	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.6	TmnxMobProfNameOrEmpty	read-create	The value of tmnxMobProfSgwChrgPriCdfDiaPeer specifies the primary Charging Data Function (CDF) diameter peer profile for this charging profile. If a corresponding diameter peer profile does not exist in tmnxMobProfDiaPeerTable, an 'inconsistentValue' error will be returned.
ROW tmnxMobProfSgwChrgRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.2	RowStatus	read-create	The value of tmnxMobProfSgwChrgRowStatus specifies the row status of this entry. It is used for creation and deletion of this charging profile.
TMN tmnxMobProfSgwChrgSecCdfDiaPeer	1.3.6.1.4.1.6527.3.1.2.67.1.15.1.7	TmnxMobProfNameOrEmpty	read-create	The value of tmnxMobProfSgwChrgSecCdfDiaPeer specifies the secondary Charging Data Function (CDF) diameter peer profile for this charging profile. If a corresponding diameter peer profile does not exist in tmnxMobProfDiaPeerTable, an 'inconsistentValue' error will be returned.
U32 tmnxMobProfSysBCActivtyRate	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.6	Unsigned32	read-create	The value of tmnxMobProfSysBCActivtyRate specifies the maximum number of bearer-contexts creation or deletion activities per second per Mobility Service Module (MSM). The bearer-context activity can be related to a default bearer or a dedicated bearer. Activities above the specified limit will not be serviced by the MSM.
U32 tmnxMobProfSysBCLimit	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.5	Unsigned32	read-create	The value of tmnxMobProfSysBCLimit specifies the maximum number of bearer-contexts allowed on a Mobility Service Module (MSM). The bearer-context can be a default bearer type or a dedicated bearer type.
U32 tmnxMobProfSysBCPdnLimit	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.7	Unsigned32	read-create	The value of tmnxMobProfSysBCPdnLimit specifies the maximum number of bearers allowed to be established per User Equipment (UE) and Access Point Name (APN) or Packet Data Network Gateway (PGW) connection. The gateway will reject the bearer creations once this is reached and allow the bearer creations only when the bearer number reaches below the limit.
U32 tmnxMobProfSysBCUeLimit	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.8	Unsigned32	read-create	The value of tmnxMobProfSysBCUeLimit specifies the maximum number of bearers allowed to be established per User Equipment (UE). Gateway will reject the bearer creations once this is reached and allow the bearer creations only when the bearer number reaches below the limit.
TMN tmnxMobProfSysCpuThreshldCriticl	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.11	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysCpuThreshldCriticl specifies the critical CPU threshold for overload control per Mobility Service Module (MSM).
TMN tmnxMobProfSysCpuThreshldMajor	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.12	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysCpuThreshldMajor specifies the major CPU threshold for overload control per Mobility Service Module (MSM).
TMN tmnxMobProfSysCpuThreshldMinor	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.13	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysCpuThreshldMinor specifies the minor CPU threshold for overload control per Mobility Service Module (MSM).
TIT tmnxMobProfSysDescription	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.4	TItemDescription	read-create	The value of tmnxMobProfSysDescription specifies the description string for this system limit profile. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
tmnxMobProfSysEntry	1.3.6.1.4.1.6527.3.1.2.67.1.1.1		not-accessible	Each row entry represents a system limit profile defined in the system. Entries can be created and deleted by the user. System limit profile 'default' is created by the agent itself at system initialization. It cannot be modified or deleted.
TIM tmnxMobProfSysLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.3	TimeStamp	read-only	The value of tmnxMobProfSysLastChanged indicates the timestamp of the last change to this row in tmnxMobProfSysTable.
TMN tmnxMobProfSysMemThreshldCriticl	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.14	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysMemThreshldCriticl specifies the critical memory threshold for overload control per Mobility Service Module (MSM).
TMN tmnxMobProfSysMemThreshldMajor	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.15	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysMemThreshldMajor specifies the major memory threshold for overload control per Mobility Service Module (MSM).
TMN tmnxMobProfSysMemThreshldMinor	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.16	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysMemThreshldMinor specifies the minor memory threshold for overload control per Mobility Service Module (MSM).
TMN tmnxMobProfSysName	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobProfSysName specifies the unique name of this system limit profile.
TMN tmnxMobProfSysPagingBufferLimit	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.24	TmnxMobBufferLimit	read-create	The value of tmnxMobProfSysPagingBufferLimit specifies the down-link buffer limit for the idle-user in the Serving Gateway (SGW). The SGW buffers down-link packets from the Packet Data Network Gateway(PGW) and indicates the Mobility Management Entity (MME) to page or wakeup the User Equipment (UE). The buffer is common for all the UE flows.
TMN tmnxMobProfSysPagingBufferSize	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.25	TmnxMobQueueLimit	read-create	The value of tmnxMobProfSysPagingBufferSize specifies the paging buffer-size set aside in fast-path for idle-user down-link buffering.
U32 tmnxMobProfSysPagingTimeout	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.26	Unsigned32	read-create	The value of tmnxMobProfSysPagingTimeout specifies the paging time-out value for the Serving Gateway (SGW) paging request. The SGW waits till the tmnxMobProfSysPagingTimeout time for the paging response, then the idle-user paging timer is canceled and the buffered down-link packets are discarded.
ROW tmnxMobProfSysRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.2	RowStatus	read-create	The value of tmnxMobProfSysRowStatus specifies the row status of this entry. It is used for creation and deletion of this system limit profile.
TMN tmnxMobProfSysS1BufferLimit	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.27	TmnxMobBufferLimit	read-create	The value of tmnxMobProfSysS1BufferLimit specifies the down-link buffer limit for the S1 based mobility handover scenario in the Serving Gateway (SGW). If the buffer limit has been reached, then the incoming packets from the Packet Data Network Gateway (PGW) are dropped.
TMN tmnxMobProfSysS1BufferSize	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.28	TmnxMobQueueLimit	read-create	The value of tmnxMobProfSysS1BufferSize specifies the buffer-size set aside in fast-path for S1 based mobility down-link buffering.
U32 tmnxMobProfSysSDFIpv4Limit	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.9	Unsigned32	read-create	The value of tmnxMobProfSysSDFIpv4Limit specifies the maximum number of IPv4 service data flows on a gateway.
U32 tmnxMobProfSysSDFIpv6Limit	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.10	Unsigned32	read-create	The value of tmnxMobProfSysSDFIpv6Limit specifies the maximum number of IPv6 service data flows on a gateway.
TMN tmnxMobProfSysSgnlFailThrshldGxc	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.20	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysSgnlFailThrshldGxc specifies the Gxc reference point signaling failure threshold.
TMN tmnxMobProfSysSgnlFailThrshldS11	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.19	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysSgnlFailThrshldS11 specifies the S11 reference point signaling failure threshold.
TMN tmnxMobProfSysSgnlFailThrshldS5	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.17	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysSgnlFailThrshldS5 specifies the S5 reference point signaling failure threshold.
TMN tmnxMobProfSysSgnlFailThrshldS8	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.18	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysSgnlFailThrshldS8 specifies the S8 reference point signaling failure threshold.
tmnxMobProfSysTable	1.3.6.1.4.1.6527.3.1.2.67.1.1		not-accessible	The tmnxMobProfSysTable has an entry for each system limit profile configured on the system. A system limit profile is configured to limit the resource utilization and can be applied in system configuration mode at the global level (applicable for all MSMs) by setting the value of TIMETRA-MOBILE-GATEWAY-MIB::tmnxMobGwSysLimitName or at the mobile system group level by setting the value of the corresponding TIMETRA-MOBILE-GATEWAY-MIB::tmnxMobGwSysGroupSysLimitName.
TIM tmnxMobProfSysTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.1	TimeStamp	read-only	The value of tmnxMobProfSysTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobProfSysTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TMN tmnxMobProfSysTrfcDropThrshldS1u	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.21	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysTrfcDropThrshldS1u specifies the S1u reference point traffic drop threshold.
TMN tmnxMobProfSysTrfcDropThrshldS5	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.22	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysTrfcDropThrshldS5 specifies the S5 reference point traffic drop threshold.
TMN tmnxMobProfSysTrfcDropThrshldS8	1.3.6.1.4.1.6527.3.1.2.67.1.1.1.23	TmnxMobProfThreshold	read-create	The value of tmnxMobProfSysTrfcDropThrshldS8 specifies the S8 reference point traffic drop threshold.
tmnxMobProfUmtsQosPolGroup	1.3.6.1.4.1.6527.3.1.1.67.2.9			The group of objects supporting management of the Universal Mobile Telecommunications System (UMTS) Quality of Service (QoS) Policy for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems.
tmnxMobProfUnsupportedGroup	1.3.6.1.4.1.6527.3.1.1.67.2.5			This group of objects is not supported on the Alcatel-Lucent 7750 Mobile Gateway systems.
tmnxMobProfV1v0Compliance	1.3.6.1.4.1.6527.3.1.1.67.1.1			The compliance statement for management of profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems R1.0.
tmnxMobProfV3Group	1.3.6.1.4.1.6527.3.1.1.67.2.14			The group of objects supporting management of profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems in 3.0 release.
tmnxMobProfV3v0Compliance	1.3.6.1.4.1.6527.3.1.1.67.1.2			The compliance statement for management of profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems R3.0. This compliance statement was made obsolete in the R3.1 release.
tmnxMobProfV4v0Compliance	1.3.6.1.4.1.6527.3.1.1.67.1.4			The compliance statement for management of profiles for the mobile gateways on the Alcatel-Lucent 7750 Mobile Gateway systems 4.0 release.
TMN tmnxMobUmtsQosPolBackground	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.12	TmnxMobQciValue	read-create	The value of tmnxMobUmtsQosPolBackground specifies the QoS Class Identifier (QCI) value when the traffic class is Background.
TMN tmnxMobUmtsQosPolConvSpeechQci	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.4	TmnxMobQciValue	read-create	The value of tmnxMobUmtsQosPolStreamQciValue specifies the QoS Class Identifier (QCI) value when the value for Source Statistics Descriptor (SSD) is speech and traffic class is Conversational.
TMN tmnxMobUmtsQosPolConvUnkTdg	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.5	TmnxMobQciValue	read-create	The value of tmnxMobUmtsQosPolStreamQciValue specifies the QoS Class Identifier (QCI) value when the value for Source Statistics Descriptor (SSD) is unknown, traffic class is Conversational and the Transfer Delay parameter is greater or equal to 150 ms.
TMN tmnxMobUmtsQosPolConvUnkTdl	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.6	TmnxMobQciValue	read-create	The value of tmnxMobUmtsQosPolStreamQciValue specifies the QoS Class Identifier (QCI) value when the value for Source Statistics Descriptor (SSD) is unknown, traffic class is Conversational and the Transfer Delay parameter is lower than 150 ms.
tmnxMobUmtsQosPolEntry	1.3.6.1.4.1.6527.3.1.2.67.1.19.1		not-accessible	Each row entry represents a Universal Mobile Telecommunications System (UMTS) Quality of Service (QoS) Policy defined in the system. Entries can be created and deleted by the user. For each entry the mapping between pre-Rel-8 QoS parameter value pairs and QoS Class Identifier (QCI) values must be 1-to-1, which means the values for all the QCI objects in tmnxMobUmtsQosPolTable must be non-overlapping. If the mapping is not 1-to-1, at the time of association of this policy at gateway level an 'inconsistentValue' error will be returned. A maximum of 1024 policies can be configured in the system.
TMN tmnxMobUmtsQosPolInterP1Qci	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.9	TmnxMobQciValue	read-create	The value of tmnxMobUmtsQosPolInterP1Qci specifies the QoS Class Identifier (QCI) value when the value for Traffic Handling Priority is 1, Signaling Indication is not enabled and traffic class is Interactive.
TMN tmnxMobUmtsQosPolInterP2Qci	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.10	TmnxMobQciValue	read-create	The value of tmnxMobUmtsQosPolInterP2Qci specifies the QoS Class Identifier (QCI) value when the value for Traffic Handling Priority is 2, Signaling Indication is not enabled and traffic class is Interactive.
TMN tmnxMobUmtsQosPolInterP3Qci	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.11	TmnxMobQciValue	read-create	The value of tmnxMobUmtsQosPolInterP3Qci specifies the QoS Class Identifier (QCI) value when the value for Traffic Handling Priority is 3, Signaling Indication is not enabled and traffic class is Interactive.
TMN tmnxMobUmtsQosPolInterSigP1Qci	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.8	TmnxMobQciValue	read-create	The value of tmnxMobUmtsQosPolInterSigP1Qci specifies the QoS Class Identifier (QCI) value when the value for Traffic Handling Priority is 1, Signaling Indication is enabled and traffic class is Interactive.
TIM tmnxMobUmtsQosPolLastChanged	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.3	TimeStamp	read-only	The value of tmnxMobUmtsQosPolLastChanged indicates the timestamp of the last change to this row in tmnxMobUmtsQosPolTable.
TMN tmnxMobUmtsQosPolName	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.1	TmnxMobProfName	not-accessible	The value of tmnxMobUmtsQosPolName specifies the unique name of this Universal Mobile Telecommunications System (UMTS) Quality of Service (QoS) Policy.
ROW tmnxMobUmtsQosPolRowStatus	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.2	RowStatus	read-create	The value of tmnxMobUmtsQosPolRowStatus specifies the row status of this entry. It is used for creation and deletion of this Universal Mobile Telecommunications System (UMTS) Quality of Service (QoS) Policy.
TMN tmnxMobUmtsQosPolStreamQciValue	1.3.6.1.4.1.6527.3.1.2.67.1.19.1.7	TmnxMobQciValue	read-create	The value of tmnxMobUmtsQosPolStreamQciValue specifies the QoS Class Identifier (QCI) value when the value for Source Statistics Descriptor (SSD) is unknown or speech and traffic class is Streaming.
tmnxMobUmtsQosPolTable	1.3.6.1.4.1.6527.3.1.2.67.1.19		not-accessible	The tmnxMobUmtsQosPolTable has an entry for each Universal Mobile Telecommunications System (UMTS) Quality of Service (QoS) Policy configured on the system. It defines the mapping between standardized QoS Class Identifier (QCI) and pre-Rel-8 QoS parameter values.
TIM tmnxMobUmtsQosPolTblLstChgd	1.3.6.1.4.1.6527.3.1.2.67.2.19	TimeStamp	read-only	The value of tmnxMobUmtsQosPolTblLstChgd indicates the sysUpTime at the time of the last modification to tmnxMobUmtsQosPolTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.

FAQ

How can TIMETRA-MOBILE-PROFILE-MIB warn me before a mobile gateway hits subscriber capacity?
Its tmnxMobProfSysTable defines per-profile limits such as bearer-context limit, PDN limit, and UE (subscriber) limit; comparing actual session/bearer counts against these configured limits shows when a 7750 SR mobile gateway profile is approaching capacity, ahead of session rejections.

What kind of mobile-core data does this MIB expose on a Nokia/Alcatel-Lucent 7750 SR?
It exposes subscriber profile and policy parameters for the GGSN/PDN-GW mobile gateway function, including bearer-context activity rate and IPv4 service-data-flow limits, giving visibility into mobile packet-core capacity and policy configuration.

RFC description

Nokia Timetra mobile profile management for subscriber and session handling (vendor-private).

Start monitoring Nokia/Alcatel-Lucent 7750 SR mobile-gateway platforms, entire SR OS mobile-gateway line (subscriber-profile/bearer capacity status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-MOBILE-PROFILE-MIB

What Is TIMETRA-MOBILE-PROFILE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

FAQ

RFC description