TIMETRA-OAM-PM-MIB :: tmnxOamPmCfgLossSlmRunTimeLeft

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TIMETRA-OAM-PM-MIB › tmnxOamPmCfgLossSlmRunTimeLeft

tmnxOamPmCfgLossSlmRunTimeLeft

Module: TIMETRA-OAM-PM-MIB

OID (symbolic): TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossSlmRunTimeLeft

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.12

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The value of tmnxOamPmCfgLossSlmRunTimeLeft indicates the run time
remaining for the specified session's SLM test.

For example, suppose an SLM test has the following configuration:

tmnxOamPmCfgSessType   tmnxOamPmCfgLossSlmTestDuration
--------------------   --------------------------------
'onDemand(2)'          1000 (seconds)

Then, when the SLM test is started (see
tmnxOamPmCfgLossSlmOnDmndStatus), tmnxOamPmCfgLossSlmRunTimeLeft is
initialized to 1000 seconds.  After a minute,
tmnxOamPmCfgLossSlmRunTimeLeft is 940 seconds.

If tmnxOamPmCfgSessType is 'proactive(1)', zero is always returned
(because a proactive test runs until it is manually stopped).

If tmnxOamPmCfgSessType is 'onDemand(2)' and the test is stopped (see
tmnxOamPmCfgLossSlmOnDmndStatus), zero is returned (because the test
is not running).

What is tmnxOamPmCfgLossSlmRunTimeLeft?

Shows how many seconds remain (0-86400) in this session's currently running on-demand SLM test, counting down from the configured tmnxOamPmCfgLossSlmTestDuration; for example a 1000-second test reads 940 after one minute has elapsed. Always reads zero for a proactive test or once an on-demand test has stopped.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.12
snmpwalk -v2c -c public <target> TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossSlmRunTimeLeft

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.12.1
snmpget -v2c -c public <target> TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossSlmRunTimeLeft.1

Start monitoring Nokia SR OS routers (Service OAM delay/loss performance-monitoring session status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossSlmRunTimeLeft OID value, configure state conditions and alerts, and monitor any Nokia SR OS routers (Service OAM delay/loss performance-monitoring session status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.92tmnxOamPmObjsTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1tmnxOamPmCfgObjsTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3tmnxOamPmCfgTableObjsTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3.6tmnxOamPmCfgLossSlmTableTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1tmnxOamPmCfgLossSlmEntryTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3.6.1.12tmnxOamPmCfgLossSlmRunTimeLeftTIMETRA-OAM-PM-MIB