TIMETRA-OAM-PM-MIB :: tmnxOamPmCfgThrLossHliRaise

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TIMETRA-OAM-PM-MIB › tmnxOamPmCfgThrLossHliRaise

tmnxOamPmCfgThrLossHliRaise

Module: TIMETRA-OAM-PM-MIB

OID (symbolic): TIMETRA-OAM-PM-MIB::tmnxOamPmCfgThrLossHliRaise

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The value of tmnxOamPmCfgThrLossHliRaise specifies the raise threshold for High Loss Intervals (HLIs).

tmnxOamPmCfgThrLossHliRaise has the same operating principles as tmnxOamPmCfgThrLossChliRaise.

Depending on the specified indices, tmnxOamPmCfgThrLossHliRaise is the raise threshold for: tmnxOamPmStsLossLmmHliBwd, tmnxOamPmStsLossLmmHliFwd + tmnxOamPmStsLossLmmHliBwd, tmnxOamPmStsLossLmmHliFwd, tmnxOamPmStsLossSlmHliBwd, tmnxOamPmStsLossSlmHliFwd + tmnxOamPmStsLossSlmHliBwd, tmnxOamPmStsLossSlmHliFwd, tmnxOamPmStsLossTwlHliBwd, tmnxOamPmStsLossTwlHliFwd + tmnxOamPmStsLossTwlHliBwd, or tmnxOamPmStsLossTwlHliFwd.

What is tmnxOamPmCfgThrLossHliRaise?

Sets the High Loss Interval (HLI) count (-1 to disable, or 1-864000) at which SROS raises a loss TCA for the indicated test type/direction/aggregation, using the same raise/clear pairing and immediate-trigger behavior as tmnxOamPmCfgThrLossChliRaise but tracking HLI rather than CHLI counters. Admins use HLI thresholds to flag isolated (non-consecutive) high-loss intervals as distinct from the sustained-loss CHLI condition.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.4
snmpwalk -v2c -c public <target> TIMETRA-OAM-PM-MIB::tmnxOamPmCfgThrLossHliRaise

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.4.1
snmpget -v2c -c public <target> TIMETRA-OAM-PM-MIB::tmnxOamPmCfgThrLossHliRaise.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.4.1 i <value>

Start monitoring Nokia SR OS routers (Service OAM delay/loss performance-monitoring session status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-OAM-PM-MIB::tmnxOamPmCfgThrLossHliRaise OID value, configure state conditions and alerts, and monitor any Nokia SR OS routers (Service OAM delay/loss performance-monitoring session status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.92tmnxOamPmObjsTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1tmnxOamPmCfgObjsTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3tmnxOamPmCfgTableObjsTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3.14tmnxOamPmCfgThrLossFwBwAgTableTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1tmnxOamPmCfgThrLossFwBwAgEntryTIMETRA-OAM-PM-MIB
1.3.6.1.4.1.6527.3.1.2.92.1.3.14.1.4tmnxOamPmCfgThrLossHliRaiseTIMETRA-OAM-PM-MIB