ME1200-IP-MIB :: me1200IpStatisticsGlobalsIpv4InHdrErrors

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ME1200-IP-MIB › me1200IpStatisticsGlobalsIpv4InHdrErrors

me1200IpStatisticsGlobalsIpv4InHdrErrors

Module: ME1200-IP-MIB

OID (symbolic): ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv4InHdrErrors

OID (numeric): 1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.5

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc.

Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.

What is me1200IpStatisticsGlobalsIpv4InHdrErrors?

This counter counts datagrams dropped because the IP header itself was malformed, such as a bad version number, a bad option, or an exceeded hop count, tallied system-wide across every IP interface on the switch for IPv4 traffic. A rising value while everything else looks healthy is usually the first sign of a misconfiguration or an attack, so admins graph it alongside the throughput counters rather than reading it alone.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.5
snmpwalk -v2c -c public <target> ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv4InHdrErrors

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.5.1
snmpget -v2c -c public <target> ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv4InHdrErrors.1

Start monitoring Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv4InHdrErrors OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.102me1200IpMIBME1200-IP-MIB
1.3.6.1.4.1.9.9.815.1.102.1me1200IpMIBObjectsME1200-IP-MIB
1.3.6.1.4.1.9.9.815.1.102.1.4me1200IpStatisticsME1200-IP-MIB
1.3.6.1.4.1.9.9.815.1.102.1.4.1me1200IpStatisticsGlobalsME1200-IP-MIB
1.3.6.1.4.1.9.9.815.1.102.1.4.1.1me1200IpStatisticsGlobalsIpv4ME1200-IP-MIB
1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.5me1200IpStatisticsGlobalsIpv4InHdrErrorsME1200-IP-MIB