All MIBs › ME1200-IP-MIB › me1200IpStatusInterfaceIpv6Duplicated
me1200IpStatusInterfaceIpv6Duplicated
Module: ME1200-IP-MIB
OID (symbolic): ME1200-IP-MIB::me1200IpStatusInterfaceIpv6Duplicated
OID (numeric): 1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.5
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: Indicates the address duplication is detected by Duplicate Address Detection (a.k.a. DAD).
If the address is a link-local address formed from an interface identifier based on the hardware address, which is supposed to be uniquely assigned (e.g., EUI-64 for an Ethernet interface), IP operation on the interface SHOULD be disabled.
What is me1200IpStatusInterfaceIpv6Duplicated?
This read-only flag reports whether Duplicate Address Detection found this IPv6 address already in use elsewhere on the link; the MIB notes that if it's a link-local address derived from the interface's hardware MAC, IP operation on the interface should be disabled since that's supposed to be unique.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.5 snmpwalk -v2c -c public <target> ME1200-IP-MIB::me1200IpStatusInterfaceIpv6Duplicated
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.5.1 snmpget -v2c -c public <target> ME1200-IP-MIB::me1200IpStatusInterfaceIpv6Duplicated.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> me1200IpStatusInterfaceIpv6Duplicated.1
Start monitoring Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-IP-MIB::me1200IpStatusInterfaceIpv6Duplicated OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.102 | me1200IpMIB | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1 | me1200IpMIBObjects | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.3 | me1200IpStatus | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.3.2 | me1200IpStatusInterfaces | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.3.2.4 | me1200IpStatusInterfaceIpv6Table | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1 | me1200IpStatusInterfaceIpv6Entry | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.5 | me1200IpStatusInterfaceIpv6Duplicated | ME1200-IP-MIB |