All MIBs › ME1200-IP-MIB › me1200IpStatisticsGlobalsIpv6OutDiscards
me1200IpStatisticsGlobalsIpv6OutDiscards
Module: ME1200-IP-MIB
OID (symbolic): ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv6OutDiscards
OID (numeric): 1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.23
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in OutForwDatagrams if any such datagrams met this (discretionary) discard criterion.
Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
What is me1200IpStatisticsGlobalsIpv6OutDiscards?
This counter counts outbound datagrams dropped for a reason other than an error, such as running out of buffer space, including datagrams that were otherwise ready to be forwarded, tallied system-wide across every IP interface on the switch for IPv6 traffic. A rising value while everything else looks healthy is usually the first sign of a misconfiguration or an attack, so admins graph it alongside the throughput counters rather than reading it alone.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.23 snmpwalk -v2c -c public <target> ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv6OutDiscards
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.23.1 snmpget -v2c -c public <target> ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv6OutDiscards.1
Start monitoring Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv6OutDiscards OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.102 | me1200IpMIB | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1 | me1200IpMIBObjects | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.4 | me1200IpStatistics | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.4.1 | me1200IpStatisticsGlobals | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.4.1.2 | me1200IpStatisticsGlobalsIpv6 | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.23 | me1200IpStatisticsGlobalsIpv6OutDiscards | ME1200-IP-MIB |