ME1200-IP-MIB :: me1200IpStatisticsInterfaceIpv6InForwDatagrams

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ME1200-IP-MIB › me1200IpStatisticsInterfaceIpv6InForwDatagrams

me1200IpStatisticsInterfaceIpv6InForwDatagrams

Module: ME1200-IP-MIB

OID (symbolic): ME1200-IP-MIB::me1200IpStatisticsInterfaceIpv6InForwDatagrams

OID (numeric): 1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.11

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination.

When tracking interface statistics, the counter of the incoming interface is incremented for each datagram.

Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.

What is me1200IpStatisticsInterfaceIpv6InForwDatagrams?

This counter counts inbound datagrams that weren't addressed to this device, for which it looked up a route in order to forward them onward, tallied for one specific IP interface, selected by the row's interface index for IPv6 traffic. Network management tools poll it periodically and graph the delta between polls to watch traffic volume and trends over time.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.11
snmpwalk -v2c -c public <target> ME1200-IP-MIB::me1200IpStatisticsInterfaceIpv6InForwDatagrams

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.11.1
snmpget -v2c -c public <target> ME1200-IP-MIB::me1200IpStatisticsInterfaceIpv6InForwDatagrams.1

Start monitoring Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-IP-MIB::me1200IpStatisticsInterfaceIpv6InForwDatagrams OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.102me1200IpMIBME1200-IP-MIB
1.3.6.1.4.1.9.9.815.1.102.1me1200IpMIBObjectsME1200-IP-MIB
1.3.6.1.4.1.9.9.815.1.102.1.4me1200IpStatisticsME1200-IP-MIB
1.3.6.1.4.1.9.9.815.1.102.1.4.2me1200IpStatisticsInterfacesME1200-IP-MIB
1.3.6.1.4.1.9.9.815.1.102.1.4.2.3me1200IpStatisticsInterfaceIpv6TableME1200-IP-MIB
1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1me1200IpStatisticsInterfaceIpv6EntryME1200-IP-MIB
1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.11me1200IpStatisticsInterfaceIpv6InForwDatagramsME1200-IP-MIB