All MIBs › ME1200-IP-MIB › me1200IpStatisticsGlobalsIpv6InAddrErrors
me1200IpStatisticsGlobalsIpv6InAddrErrors
Module: ME1200-IP-MIB
OID (symbolic): ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv6InAddrErrors
OID (numeric): 1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
What is me1200IpStatisticsGlobalsIpv6InAddrErrors?
This counter counts datagrams dropped because the destination address in the IP header wasn't a valid address for this device to receive, including malformed addresses, tallied system-wide across every IP interface on the switch for IPv6 traffic. A rising value while everything else looks healthy is usually the first sign of a misconfiguration or an attack, so admins graph it alongside the throughput counters rather than reading it alone.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.7 snmpwalk -v2c -c public <target> ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv6InAddrErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.7.1 snmpget -v2c -c public <target> ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv6InAddrErrors.1
Start monitoring Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-IP-MIB::me1200IpStatisticsGlobalsIpv6InAddrErrors OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.102 | me1200IpMIB | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1 | me1200IpMIBObjects | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.4 | me1200IpStatistics | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.4.1 | me1200IpStatisticsGlobals | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.4.1.2 | me1200IpStatisticsGlobalsIpv6 | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.7 | me1200IpStatisticsGlobalsIpv6InAddrErrors | ME1200-IP-MIB |