All MIBs › ME1200-IP-MIB › me1200IpConfigInterfacesIpv4EnableDhcpClient
me1200IpConfigInterfacesIpv4EnableDhcpClient
Module: ME1200-IP-MIB
OID (symbolic): ME1200-IP-MIB::me1200IpConfigInterfacesIpv4EnableDhcpClient
OID (numeric): 1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1.3
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Enable IPv4 dhcp client.
Note: the dhcp client can only be enabled if there is no conflicts in the values of: ipv4Address, prefixSize, and dhcpClientFallbackTimeout
What is me1200IpConfigInterfacesIpv4EnableDhcpClient?
This read-write flag turns on the IPv4 DHCP client for this IP interface, so the switch leases its management address automatically instead of using a static one; the MIB warns it can only be enabled if the static address, prefix size and fallback timeout fields on the same row don't conflict with DHCP use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1.3 snmpwalk -v2c -c public <target> ME1200-IP-MIB::me1200IpConfigInterfacesIpv4EnableDhcpClient
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1.3.1 snmpget -v2c -c public <target> ME1200-IP-MIB::me1200IpConfigInterfacesIpv4EnableDhcpClient.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1.3.1 s <value>
Start monitoring Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-IP-MIB::me1200IpConfigInterfacesIpv4EnableDhcpClient OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.102 | me1200IpMIB | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1 | me1200IpMIBObjects | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.2 | me1200IpConfig | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.2.2 | me1200IpConfigInterfaces | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.2.2.3 | me1200IpConfigInterfacesIpv4Table | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1 | me1200IpConfigInterfacesIpv4Entry | ME1200-IP-MIB |
| 1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1.3 | me1200IpConfigInterfacesIpv4EnableDhcpClient | ME1200-IP-MIB |