All MIBs › CDX-6500-COMMON-MIB
Category: DSL and Broadband
Description: Provides common management objects for Motorola/Codex CDX 6500 statistical multiplexer system configuration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CDX-6500-COMMON-MIB?
CDX-6500-COMMON-MIB provides common/shared management objects for the Motorola/Codex CDX 6500 statistical multiplexer, a legacy WAN multiplexing platform used to combine multiple lower-speed data channels onto shared trunk circuits. The single sampled object, cdx6500PSTStationProtocolGroup, suggests this common MIB defines shared protocol-group/station-level constructs reused across the broader CDX 6500 MIB family rather than device-wide performance counters itself. In practice a common MIB of this kind is used to establish shared object groups referenced when monitoring per-station protocol configuration and status across the multiplexer's channel cards, contributing to overall visibility into channel/card configuration state rather than classic hardware sensors like temperature or CPU load. It is inherently a dependency for other CDX 6500-family MIBs (such as the T1/E1 option-card SMI) which reuse its common definitions. It was deployed in legacy telco/enterprise WAN environments using Codex CDX 6500 statistical multiplexer chassis for channel aggregation. Engineers can download the CDX-6500-COMMON-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CDX-6500-COMMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Motorola/Codex CDX 6500 statistical multiplexer
Monitoring Examples
The only sampled object, cdx6500PSTStationProtocolGroup, indicates this common MIB defines a shared protocol-group construct used to identify per-station protocol settings on the multiplexer; an operator would reference this group when correlating station-level protocol configuration across other CDX 6500 MIBs. Given only one grounded object name, this is a narrow, largely structural monitoring role rather than a rich set of runtime counters.
What Can Be Monitored
- station protocol group configuration
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks | |
| enterprises | |
| mgmt |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| cdx6500 | 1.3.6.1.4.1.449.2.1 | |||
| INT cdx6500allportsBootPort | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.26 | INTEGER | write-only | Boots the specified Port. bootPort - Boot the Port. |
| CTR cdx6500allportsCharInTot | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.8 | Counter | read-only | Number of characters received by the port since the last node, port or statistics reset. |
| CTR cdx6500allportsCharOutTot | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.9 | Counter | read-only | Number of characters sent by the port since the last node, port or statistics reset. |
| INT cdx6500allportsCharsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.15 | INTEGER | read-only | Summary of the characters being received over the port. |
| INT cdx6500allportsCharsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.16 | INTEGER | read-only | Summary of the characters being sent over the port. |
| NUM cdx6500allportsCRCErrors | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.23 | Counter16 | read-only | Number of CRC errors since the last node or statistics reset. CRC Errors: Cyclical Redundancy failure because of noise on the line. |
| CTR cdx6500allportsFrameInTot | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.12 | Counter | read-only | Number of frames received by the port since the last node, port or statistics reset. |
| CTR cdx6500allportsFrameOutTot | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.13 | Counter | read-only | Number of frames sent by the port since the last node, port or statistics reset. |
| INT cdx6500allportsFramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.19 | INTEGER | read-only | Summary of the frames being received over the port. |
| INT cdx6500allportsFramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.20 | INTEGER | read-only | Summary of the frames being sent over the port. |
| NUM cdx6500allportsFramingErrors | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.25 | Counter16 | read-only | Number of Framing errors since the last reset. |
| NUM cdx6500allportsOverrunErrors | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.21 | Counter16 | read-only | Number of Overrun errors since the last node or statistics reset. Overrun Errors: Received data was lost because it could not be processed by the CPU. |
| NUM cdx6500allportsParityErrors | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.24 | Counter16 | read-only | Number of Parity errors since the last reset |
| CTR cdx6500allportsPktInTot | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.10 | Counter | read-only | Number of packets received by the port since the last node, port or statistics reset. |
| CTR cdx6500allportsPktOutTot | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.11 | Counter | read-only | Number of packets sent by the port since the last node, port or statistics reset. |
| INT cdx6500allportsPktsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.17 | INTEGER | read-only | Summary of the packets being received over the port. |
| INT cdx6500allportsPktsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.18 | INTEGER | read-only | Summary of the packets being sent over the port. |
| INT cdx6500allportsPktsQueued | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.14 | INTEGER | read-only | Number of packets currently queued. |
| INT cdx6500allportsPortControlStatus | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.27 | INTEGER | write-only | Change the Port Control Status. enable - Enable the Port. disable - Disable the Port. busyout - BusyOut the Port. |
| INT cdx6500allportsPortNum | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.1 | INTEGER | read-only | Number of the port |
| INT cdx6500allportsPortSpeed | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.5 | INTEGER | read-only | This is the speed of the port when Clock=Int; this is detected clock speed if Clock=Ext. If Port Speed is 0, Clock=Ext then clocking is not being received from attached device. |
| STR cdx6500allportsPortState | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.4 | DisplayString | read-only | Current Port state. |
| INT cdx6500allportsPortStatus | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.3 | INTEGER | read-only | Status of the port. disabled - Port is disabled. enabled - Port is enabled. busyOut - Port is busyOuted. up - Port is up. down - Port is down. newvalDisabled - same functionality as 'disabled', new enumeration added for RFC1155 compatibility. |
| INT cdx6500allportsPortType | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.2 | INTEGER | read-only | Type of port. |
| NUM cdx6500allportsUnderrunErrors | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.22 | Counter16 | read-only | Number of Underrun errors since the last node or statistics reset. UnderrunErrors: Transmission of a frame could not be completed because all the data had not been sent to port. |
| INT cdx6500allportsUtilizationIn | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.6 | INTEGER | read-only | Percentage of port bandwidth in use. |
| INT cdx6500allportsUtilizationOut | 1.3.6.1.4.1.449.2.1.3.1.1.18.1.7 | INTEGER | read-only | Percentage of port bandwidth in use. |
| INT cdx6500allstationsBootStation | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.21 | INTEGER | write-only | Boots the specified station. bootStn - Boot Station noBootStn - Do not boot Station. |
| INT cdx6500allstationsBusyOutStation | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.24 | INTEGER | write-only | Busy out the specified station. busyoutStn - Busyout Station. noBusyoutStn - Do not busyout Station. |
| CTR cdx6500allstationsCharInTot | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.8 | Counter | read-only | Number of characters received by the station since the last node, port, station or statistics reset. |
| CTR cdx6500allstationsCharOutTot | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.9 | Counter | read-only | Number of characters sent by the station since the last node, port, station or statistics reset. |
| INT cdx6500allstationsCharsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.15 | INTEGER | read-only | Summary of the characters being received over the station. |
| INT cdx6500allstationsCharsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.16 | INTEGER | read-only | Summary of the characters being sent over the station. |
| INT cdx6500allstationsDisableStation | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.22 | INTEGER | write-only | Disables the specified station. disableStn - Disable Station. noDisableStn - Do not disable Station. |
| INT cdx6500allstationsEnableStation | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.23 | INTEGER | write-only | Enables the specified station. enableStn - Enable Station. noEnableStn - Not not enable Station. |
| CTR cdx6500allstationsFrameInTot | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.12 | Counter | read-only | Number of frames received by the port since the last node, port, station or statistics reset. |
| CTR cdx6500allstationsFrameOutTot | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.13 | Counter | read-only | Number of frames sent by the port since the last node, port, station or statistics reset. |
| INT cdx6500allstationsFramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.19 | INTEGER | read-only | Summary of the frames being received over the station. |
| INT cdx6500allstationsFramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.20 | INTEGER | read-only | Summary of the frames being sent over the station. |
| CTR cdx6500allstationsPktInTot | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.10 | Counter | read-only | Number of packets received by the station since the last node, port, station or statistics reset. |
| CTR cdx6500allstationsPktOutTot | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.11 | Counter | read-only | Number of packets sent by the port since the last node, port, station or statistics reset. |
| INT cdx6500allstationsPktsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.17 | INTEGER | read-only | Summary of the packets being received over the station. |
| INT cdx6500allstationsPktsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.18 | INTEGER | read-only | Summary of the packets being sent over the station. |
| INT cdx6500allstationsPktsQueued | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.14 | INTEGER | read-only | Number of packets currently queued. |
| INT cdx6500allstationsPortNum | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.1 | INTEGER | read-only | Number of the port. |
| INT cdx6500allstationsStnNum | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.2 | INTEGER | read-only | Number of the station. |
| STR cdx6500allstationsStnState | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.5 | DisplayString | read-only | Current Station state. |
| INT cdx6500allstationsStnStatus | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.4 | INTEGER | read-only | Status of the station. disabled - Station is disabled. enabled - Station is enabled. busyOut - Station is busyOuted. up - Station is up. down - Station is down. newvalDisabled - same functionality as 'disabled', new enumeration added for RFC1155 compatibility. |
| STR cdx6500allstationsStnType | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.3 | DisplayString | read-only | Type of station. |
| INT cdx6500allstationsUtilizationIn | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.6 | INTEGER | read-only | Percentage of station bandwidth in use. |
| INT cdx6500allstationsUtilizationOut | 1.3.6.1.4.1.449.2.1.3.1.3.8.1.7 | INTEGER | read-only | Percentage of station bandwidth in use. |
| cdx6500CfgGeneralGroup | 1.3.6.1.4.1.449.2.1.2.2 | |||
| cdx6500CfgMnemonicEntry | 1.3.6.1.4.1.449.2.1.2.2.6.1 | not-accessible | A row of mnemonic configuration parameters. | |
| cdx6500CfgMnemonicTable | 1.3.6.1.4.1.449.2.1.2.2.6 | not-accessible | All of the configuration parameters relevant to the Mnemonic table. | |
| cdx6500CfgProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1 | |||
| cdx6500Configuration | 1.3.6.1.4.1.449.2.1.2 | |||
| cdx6500ContFlash | 1.3.6.1.4.1.449.2.1.4.21 | |||
| INT cdx6500ContFlashActiveCmem | 1.3.6.1.4.1.449.2.1.4.21.4 | INTEGER | write-only | Activate cmem in flash memory. |
| INT cdx6500ContFlashActiveImage | 1.3.6.1.4.1.449.2.1.4.21.3 | INTEGER | write-only | Activate image in flash memory. |
| INT cdx6500ContFlashCopyCmem | 1.3.6.1.4.1.449.2.1.4.21.2 | INTEGER | write-only | Copy cmem from current to alternate or alternate to current. |
| INT cdx6500ContFlashCopyImage | 1.3.6.1.4.1.449.2.1.4.21.1 | INTEGER | write-only | Copy image from current to alternate or alternate to current. |
| INT cdx6500ContFlashDeleteImage | 1.3.6.1.4.1.449.2.1.4.21.5 | INTEGER | write-only | Delete all images in flash memory. |
| cdx6500Controls | 1.3.6.1.4.1.449.2.1.4 | |||
| cdx6500ContT3E3Table | 1.3.6.1.4.1.449.2.1.4.23 | |||
| cdx6500ContTFTP | 1.3.6.1.4.1.449.2.1.4.2 | |||
| cdx6500CreatePortAndStationEntry | 1.3.6.1.4.1.449.2.1.2.1.9.1 | not-accessible | Entry for representing Creating Port and Station Record. | |
| cdx6500CreatePortAndStationTable | 1.3.6.1.4.1.449.2.1.2.1.9 | not-accessible | Create Port and Station table. | |
| INT cdx6500CreatePortType | 1.3.6.1.4.1.449.2.1.2.1.9.1.2 | INTEGER | write-only | port type to be created. pad : PAD port x25 : X25 port mx25 : Multipoint X25 port sdlc : Synchronous Data Link Control Port xdlc : X25 Data Link Control Port fri : Frame Relay Interface Port tr : Token Ring Port eth : Ethernet Port fra : Frame Relay Access Port. |
| INT cdx6500CreateStation | 1.3.6.1.4.1.449.2.1.2.1.9.1.3 | INTEGER | write-only | station number to be created. The instance should be existing port number. Station Range : 1 - Max Station Number. |
| INT cdx6500CSISMaxAllowed | 1.3.6.1.4.1.449.2.1.3.2.5.1.2 | INTEGER | read-only | Number of ports that this option can support. Options can be purchased to support different numbers of ports. Value of 65535 indicates no limit. |
| INT cdx6500CSISNumUsed | 1.3.6.1.4.1.449.2.1.3.2.5.1.3 | INTEGER | read-only | The number of ports actually being used with this option. |
| INT cdx6500CSISOptionAuth | 1.3.6.1.4.1.449.2.1.3.2.5.1.4 | INTEGER | read-only | unauthorized - an attempt was made to use an option that has not been purchased or enabled. authorized - all attempts to use the option were authorized. |
| INT cdx6500CSISOptionNumber | 1.3.6.1.4.1.449.2.1.3.2.5.1.1 | INTEGER | read-only | Table index, which is code for the software option. Following are the various software options and their codes. 1 - MX25 2 - SDLC 3 - BSC3270 4 - BSC2780 5 - VIP 6 - VIDEOTEX 7 - Data/Connection Protect 8 - INL backup 9 - FR DTE Interface 10 - 6600 ETM 11 - NCRBSC 12 - TRANSPARENT POLLED ASYNC 13 - INTERNAL DSD 14 - 801 AUTODIALER 15 - BSTD 16 - FLASH Enable 17 - NCCP Pad 18 - TBOP 19 - Source Routing Bridge 22 - IBM2260 23 - XDLC 24 - Transparent Bridge 25 - Local Termination 26 - SR/TB Bridge 29 - IP Routing 31 - FR DCE Interface 32 - 6520 Model ID RN 33 - 6520 Model ID SN 34 - 6520 Model ID BN 40 - TCOP 42 - FrameRelay LLC Conversion 43 - IP stack on CPU+ 44 - TNPP-PAD Enable 45 - Token Ring LLC Conversion 46 - Ethernet LLC Conversion 50 - Dial-Out Routing Manager 51 - Dial-Out Routing Agent 52 - Chinapac Billing Feature 53 - Chinapac NUIC Interface 54 - X32 Port 55 - Chinapac NUI Concentrator. |
| INT cdx6500CSISPortAuth | 1.3.6.1.4.1.449.2.1.3.2.6.1.2 | INTEGER | read-only | unauthorized - an attempt was made to use this port to exceed an option port limit. authorized - the port was not used in an unauthorized fashion. |
| INT cdx6500CSISPortNumber | 1.3.6.1.4.1.449.2.1.3.2.6.1.1 | INTEGER | read-only | The port's number. |
| INT cdx6500CSISSoftKeyEntryNumber | 1.3.6.1.4.1.449.2.1.2.2.12.1.1 | INTEGER | read-only | This is not a configurable parameter. It is the reference number for the individual software option that is being enabled. You must configure a separate entry for each software option enabled at the node. A node may have up to 20 options enabled at one time. |
| STR cdx6500CSISSoftKeyValue | 1.3.6.1.4.1.449.2.1.2.2.12.1.2 | DisplayString | read-only | This is a software key supplied by Codex Corporation for this node. |
| INT cdx6500DLSVagntdlServSubaddress | 1.3.6.1.4.1.449.2.1.1.5.10 | INTEGER | read-only | Calls with network address composed of the node address (configured in the Node record) and this subaddress will be routed to the module in this node which sends code to a remote node. No routing table entry is needed. |
| INT cdx6500DLSVagntloaderSubaddress | 1.3.6.1.4.1.449.2.1.1.5.9 | INTEGER | read-only | This is the subaddress of the download module in this node. |
| STR cdx6500DLSVAgntnmServAddress | 1.3.6.1.4.1.449.2.1.1.5.8 | DisplayString | read-only | This is the mnemonic name of the download server assigned to load this node with operational software. |
| INT cdx6500DLSVAgntSegmentSize | 1.3.6.1.4.1.449.2.1.1.5.7 | INTEGER | read-only | This is the segment size used for accounting purposes with data packets. segmentSizeDisable - segment counting disabled. segmentSize16 - 16 byte segments. segmentSize32 - 32 byte segments. segmentSize64 - 64 byte segments. segmentSize128 - 128 byte segments. segmentSize256 - 256 byte segments. segmentSize512 - 512 byte segments. segmentSize1024 - 1024 byte segments newvalSegmentSizeDisable - same as 'segmentSizeDisable', new enumeration added for RFC1155 compatibility. |
| INT cdx6500DLSVDLstate | 1.3.6.1.4.1.449.2.1.1.5.1 | INTEGER | read-only | Statistic - state of the download dlStart : Setup phase. dlCall : Setup phase. dlReq : Setup phase. dlLoad : Downloading phase. dlGss : Setup phase. dlLgs : Downloading phase. dlDone : Download Complete. dlBoot : Download Complete. dlIdle : No download. |
| INT cdx6500DLSVInitiateTransfer | 1.3.6.1.4.1.449.2.1.1.5.6 | INTEGER | write-only | Type of transfer - i.e. which bank to which bank at what throughput setting this initiates the flash to flash transfer. |
| STR cdx6500DLSVLastServer | 1.3.6.1.4.1.449.2.1.1.5.4 | DisplayString | read-only | Statistic - Last server node to send software. |
| INT cdx6500DLSVPercentComplete | 1.3.6.1.4.1.449.2.1.1.5.2 | INTEGER | read-only | Statistic - amount of download that has completed. |
| STR cdx6500DLSVTimestamp | 1.3.6.1.4.1.449.2.1.1.5.3 | DisplayString | read-only | Statistic - time of last download. |
| INT cdx6500DLSVTransferType | 1.3.6.1.4.1.449.2.1.1.5.5 | INTEGER | read-only | Statistic - type of transfer - i.e. which bank to which bank at what throughput. |
| cdx6500GCTNUIPasswordEntry | 1.3.6.1.4.1.449.2.1.2.2.7.1 | not-accessible | The Network User Identification (NUI)/Password Table. | |
| cdx6500GCTNUIPasswordTable | 1.3.6.1.4.1.449.2.1.2.2.7 | not-accessible | A list of NUI/Password configuration entries. | |
| cdx6500GCTPVCSetupEntry | 1.3.6.1.4.1.449.2.1.2.2.5.1 | not-accessible | Each entry contains a PVC source and PVC destination. | |
| cdx6500GCTPVCSetupTable | 1.3.6.1.4.1.449.2.1.2.2.5 | not-accessible | A list of Configuration Parameters for PVCs. | |
| cdx6500GCTRouteSelectionEntry | 1.3.6.1.4.1.449.2.1.2.2.1.1 | not-accessible | Each entry contains a list of parameters that makeup the Route Selection Table. | |
| cdx6500GCTRouteSelectionTable | 1.3.6.1.4.1.449.2.1.2.2.1 | not-accessible | A list of Configuration Parameters that select the links over which calls are routed. | |
| cdx6500GCTSoftwareKeyEntry | 1.3.6.1.4.1.449.2.1.2.2.12.1 | not-accessible | The Software Key for a specific optional software product code. | |
| cdx6500GCTSoftwareKeyTable | 1.3.6.1.4.1.449.2.1.2.2.12 | not-accessible | A table of Software Key configuration entries. | |
| INT cdx6500mnemEntryNum | 1.3.6.1.4.1.449.2.1.2.2.6.1.1 | INTEGER | read-only | This is not a configuration parameter. Instead, it identifies the particular Mnemonic Table entry being configured by the other parameters in the record. NOTE: You can have up to 256 entries for the 6507Plus and 6525Plus, but only 64 entries for the 6505Plus. |
| STR cdx6500mnemName | 1.3.6.1.4.1.449.2.1.2.2.6.1.2 | DisplayString | read-only | This is an mnemonic name available to PAD port users for abbreviated calling or autocalling. The following parameter will specify call details. The mnemonic CTP is reserved and specifies a call to the control port. |
| STR cdx6500mnemx28Cmd | 1.3.6.1.4.1.449.2.1.2.2.6.1.3 | DisplayString | read-only | This specifies call details for the mnemonic configured in the previous parameter. Use the format of an X.28 call command, but leave out the command specifier (the c or call). |
| INT cdx6500NMCBootNode | 1.3.6.1.4.1.449.2.1.1.4.1 | INTEGER | write-only | Setting this object will cuase the node to perform either a cold or a warm Node boot : bootCold - perform a cold Node Boot; run diagnostic tests, reload operational software, request software download if neccessary, reload configuration and start the node. bootWarm - perform a warm Node Boot; reload configuration and start the node. newvalBootCold - same functionality as 'bootCold', new enumeration added for RFC1155 compatibility. |
| INT cdx6500NMCBootTableNodeRec | 1.3.6.1.4.1.449.2.1.1.4.2 | INTEGER | write-only | Setting to bootrec will cause the running configuration to be updated using new configuration tables from CMEM. |
| cdx6500NMControlsGroup | 1.3.6.1.4.1.449.2.1.1.4 | |||
| cdx6500NMDiagnosticsGroup | 1.3.6.1.4.1.449.2.1.1.3 | |||
| cdx6500NMDLSVGroup | 1.3.6.1.4.1.449.2.1.1.5 | |||
| cdx6500NMNodeParametersGroup | 1.3.6.1.4.1.449.2.1.1.2 | |||
| INT cdx6500NMNPCalarmTmr | 1.3.6.1.4.1.449.2.1.1.2.1.11 | INTEGER | read-only | Alarm Threshold Timer. This parameter prevents a node from sending threshold alarms too frequently. If a node generates an alarm the threshold alarm timer is started and the node is not allowed to generate the same alarm until the timer has expired. This controls the frequency of alarm reporting. |
| INT cdx6500NMNPCalmDist | 1.3.6.1.4.1.449.2.1.1.2.1.15 | INTEGER | read-only | This object has been replaced by cdx6500NMNPCalmDistrib. |
| STR cdx6500NMNPCalmDistrib | 1.3.6.1.4.1.449.2.1.1.2.1.36 | DisplayString | read-only | Distribution of alarms is controlled by specifying: NONE - no alarm is sent\r\n\ CTP - send alarms to Control Port Terminal\r\n\ PRIN - send alarms to Printer Destination\r\n\ Any combination of above specified by summing (e.g. CTP+PRIN). |
| STR cdx6500NMNPCalmMmem | 1.3.6.1.4.1.449.2.1.1.2.1.16 | DisplayString | read-only | Alarm Printer Mnemonic. This specifies the mnemonic name for the destination of alarms sent by the node (if Alarm Distribution = PRIN). This destination is usually a printer or a personal computer. To prevent any alarms from being sent, set this to blank. |
| INT cdx6500NMNPCalmSelect | 1.3.6.1.4.1.449.2.1.1.2.1.17 | INTEGER | read-only | This object has been replaced by cdx6500NMNPCalmSelection. |
| STR cdx6500NMNPCalmSelection | 1.3.6.1.4.1.449.2.1.1.2.1.37 | DisplayString | read-only | Alarm type reporting by the node: NONE - no alarms reported. HIGH - high severity alarms reported. MED - medium severity alarms reported. LOW - low severity alarms reported. CONN - connection events reported. CODE - alarms from Codex 6000 communication processors reported. Any combination of above specified by summing (e.g. HIGH+CONN+. . .). |
| STR cdx6500NMNPCbillMnem | 1.3.6.1.4.1.449.2.1.1.2.1.21 | DisplayString | read-only | When billing records need to be printed, the node will use this mnemonic to call and send the records to this destination. This location is usually a printer used to print billing records. |
| INT cdx6500NMNPCbillThresh | 1.3.6.1.4.1.449.2.1.1.2.1.22 | INTEGER | read-only | When the number of billing records queued up equals this threshold, a call will be placed to the logging device to dump the billing records. |
| INT cdx6500NMNPCbillTimer | 1.3.6.1.4.1.449.2.1.1.2.1.24 | INTEGER | read-only | If billing records have been stored for printing for this amount of time (in minutes) without reaching the threshold, a call will be made so that they can be printed. |
| STR cdx6500NMNPCbroadPortSubad | 1.3.6.1.4.1.449.2.1.1.2.1.18 | DisplayString | read-only | This specifies the broadcast port subaddress for this node. Calls with network address composed of the node address and this subaddress will be routed to the broadcast port in this node. No routing table entry is needed. |
| INT cdx6500NMNPCbuffUtil | 1.3.6.1.4.1.449.2.1.1.2.1.8 | INTEGER | read-only | Buffer Utilization Threshold (%). This parameter sets the alarm level for data buffers. When data passes through a node, buffers provide temporary storage. If the number of buffers used exceeds the specified percentage of available storage, an alarm is generated. |
| INT cdx6500NMNPCchassis | 1.3.6.1.4.1.449.2.1.1.2.1.4 | INTEGER | read-only | This parameters identifies the type of chassis that this node is residing in. This is necessary in order to correctly interpret the fan and power supply status signals. newvalStandalone : same functionality as 'standalone', new enumeration added for RFC1155 compatibility. |
| INT cdx6500NMNPCCodexGroupFacility | 1.3.6.1.4.1.449.2.1.1.2.1.35 | INTEGER | read-only | This is the facility used in call packets on Codex 6500 links for passing CODEX PRIVATE facilities other than Hop Count and DCP facilities between 4.xx nodes. This should be the SAME on all nodes in the network. It need only be changed if it interferes with some other private network facility. |
| INT cdx6500NMNPCcpuUtil | 1.3.6.1.4.1.449.2.1.1.2.1.9 | INTEGER | read-only | CPU Utilization Threshold (%). If the CPU is not processing data, it is running diagnostic checks. It is never idle. This parameter specifies the amount of time spent performing non-diagnostic functions as a percentage of the total time. If this percentage exceeds the threshold, an alarm is generated. |
| INT cdx6500NMNPCctpIdleTime | 1.3.6.1.4.1.449.2.1.1.2.1.14 | INTEGER | read-only | Control Port Idle Disconnect Time (minutes). This specifies how many minutes of inactivity can occur before the control terminal is automatically disconnected |
| STR cdx6500NMNPCctpSubAddr | 1.3.6.1.4.1.449.2.1.1.2.1.13 | DisplayString | read-only | This parameter specifies the Control Port (CTP) Subaddress. Calls with network address composed of the node address and this subaddress will be routed to the control port in this node. No routing table entry is needed. |
| STR cdx6500NMNPCdate | 1.3.6.1.4.1.449.2.1.1.2.1.5 | DisplayString | read-only | The node date used for date stamps of events and traps. The format of the string is yyyymmmdd, year: four digits, month: first three letters of the month, day: 01..31. |
| INT cdx6500NMNPCdcpFac | 1.3.6.1.4.1.449.2.1.1.2.1.29 | INTEGER | read-only | This defines the facility used to carry DCP information at call setup and reconnection time in Call Request and Call Accept packets through the 6500 network. Change the value only if it interferes with some other private network facility. |
| INT cdx6500NMNPChopFacility | 1.3.6.1.4.1.449.2.1.1.2.1.38 | INTEGER | read-only | Hop Count Facility. This is the facility used in call packets on X.25 links with the INL option for network routing. This should be the SAME in all nodes in the network. It need only be changed if it interferes with some other private network facility. |
| STR cdx6500NMNPClanSubAddr | 1.3.6.1.4.1.449.2.1.1.2.1.33 | DisplayString | read-only | Calls with network address composed of the node address and this subaddress will be routed to a LAN Connection in this node. |
| INT cdx6500NMNPCmaxBill | 1.3.6.1.4.1.449.2.1.1.2.1.23 | INTEGER | read-only | This is the maximum number of billing records the node will be allowed to store to be printed. Billing records created after this maximum is reached will be lost. |
| INT cdx6500NMNPCmaxCallid | 1.3.6.1.4.1.449.2.1.1.2.1.40 | INTEGER | read-only | This is the maximum number of Call id numbers that go in the Calling Identifier table. This table can have a maximum of 512 entries. Each entry of 30 digits. |
| INT cdx6500NMNPCmaxCalls | 1.3.6.1.4.1.449.2.1.1.2.1.26 | INTEGER | read-only | Limiting the number of calls allowed in the node will eliminate data loss in extreme traffic conditions. |
| INT cdx6500NMNPCMaxFrameSize | 1.3.6.1.4.1.449.2.1.1.2.1.34 | INTEGER | read-only | The largest datalink level frame that will ever be received on any link. On WAN links this does not include space that is reserved internally for trailers. |
| INT cdx6500NMNPCmaxRoutHops | 1.3.6.1.4.1.449.2.1.1.2.1.12 | INTEGER | read-only | Maximum Routing Hops.This parameter specifies the maximum number of nodes a call may pass through before reaching its destination. |
| INT cdx6500NMNPCnoBroadInCh | 1.3.6.1.4.1.449.2.1.1.2.1.20 | INTEGER | read-only | Number of Broadcast Input Channels. This specifies the number of simultaneous broadcast messages that can be received. |
| INT cdx6500NMNPCnoBroadNets | 1.3.6.1.4.1.449.2.1.1.2.1.19 | INTEGER | read-only | Number of Broadcast Nets. This specifies the number of Broadcast Networks to which this node can send broadcast messages. A value of 0 will disable broadcast functions. |
| STR cdx6500NMNPCnodeAddress | 1.3.6.1.4.1.449.2.1.1.2.1.3 | DisplayString | read-only | The node address specifies the main part of the network address for calls destined within this node: PAD port or node resource (for example, control port) calls. Individual subaddresses specify exact destination. |
| STR cdx6500NMNPCnodeName | 1.3.6.1.4.1.449.2.1.1.2.1.1 | DisplayString | read-only | This parameter identifies the node with a name, which appears at the top of control terminal menus and reports. Range is 0 to 8 alphanumeric characters. |
| INT cdx6500NMNPCnodeNum | 1.3.6.1.4.1.449.2.1.1.2.1.2 | INTEGER | read-only | The node number identifies the node for X.25 routing purposes to prevent routing loops. |
| INT cdx6500NMNPCnumNccpDevices | 1.3.6.1.4.1.449.2.1.1.2.1.39 | INTEGER | read-only | This is the number of NCCP devices. |
| cdx6500NMNPconfig | 1.3.6.1.4.1.449.2.1.1.2.1 | |||
| STR cdx6500NMNPCpadBanner | 1.3.6.1.4.1.449.2.1.1.2.1.28 | DisplayString | read-only | PAD Banner Message. Specifies the message PAD ports send to attached terminals when they enter Command Mode. These special characters can be used to display certain information in the PAD Banner Message. A Node address C Channel Number G Group sub-address N Node Name P Port Number S Sub-address T Time V Software revision If the character following the % symbol is not one of the above, both the % and following character are discarded. The caret (^) is used as an escape character to tell the PAD to send control characters. The character following the caret is converted to a control character and is sent to the PAD port for output. The caret is discarded unless it is entered twice (^^). |
| STR cdx6500NMNPCpadBulletin | 1.3.6.1.4.1.449.2.1.1.2.1.27 | DisplayString | read-only | PAD Bulletin Message. Specifies the message that appears when a terminal connects to PAD port and enters Command Mode. To have no message appear, select blank. |
| INT cdx6500NMNPCportErr | 1.3.6.1.4.1.449.2.1.1.2.1.10 | INTEGER | read-only | Port Error Threshold. This threshold specifies the number of port errors (such as parity or framing errors) that can be detected before a medium severity alarm is generated. For example, if this parameter is set to 10, an alarm is sent when 10 errors are detected, another alarm is sent when the 20th error is detected, etc. |
| INT cdx6500NMNPCportUtil | 1.3.6.1.4.1.449.2.1.1.2.1.7 | INTEGER | read-only | Port Utilization Threshold (%). This parameter sets the alarm level for traffic on every port in a node. The traffic is checked over a 64-second interval to give an average (in characters per second). This is compared to the port's clock rate and a utilization factor is produced. If the percent of utiliaztion exceeds the setting, an alarm is generated. Port utilization records are kept for each port and the port in question is noted in the report. |
| INT cdx6500NMNPCpropProtId | 1.3.6.1.4.1.449.2.1.1.2.1.32 | INTEGER | read-only | This is the Codex Proprietary Protocol ID. Its value is put in the first byte of the Protocol Identifier field of the CUD in the Call Request packets for protocols that have not been assigned a standardized value by the CCITT. |
| INT cdx6500NMNPCpvcBill | 1.3.6.1.4.1.449.2.1.1.2.1.25 | INTEGER | read-only | At this interval the billing records will be gathered and printed for all of the PVC's in the node that have billing turned on. |
| STR cdx6500NMNPCtime | 1.3.6.1.4.1.449.2.1.1.2.1.6 | DisplayString | read-only | The node time used for time stamps of events and traps. The format of the string is hhmmss, hour: 00..23, minute 00..59, second: 00..59. |
| INT cdx6500NMNPCtrafficPri | 1.3.6.1.4.1.449.2.1.1.2.1.30 | INTEGER | read-only | Traffic Priority. This is the default traffic priority to be used on the node. newvalLow : same functionality as 'low', new enumeration added for RFC1155 compatibility. |
| INT cdx6500NMNPCtrafficStep | 1.3.6.1.4.1.449.2.1.1.2.1.31 | INTEGER | read-only | Traffic Priority Step. This specifies the number of packets to be transmitted for each lower priority packet transmitted. |
| STR cdx6500NMNPIdlCodeRevision | 1.3.6.1.4.1.449.2.1.1.2.2.5 | DisplayString | read-only | The downloaded software revision. Applicable to 6500 platforms. |
| INT cdx6500NMNPIdlCodeSize | 1.3.6.1.4.1.449.2.1.1.2.2.7 | INTEGER | read-only | The size of downloaded software in bytes. Applicable to 6500 platforms. |
| STR cdx6500NMNPIdlCodeSource | 1.3.6.1.4.1.449.2.1.1.2.2.6 | DisplayString | read-only | The source of downloaded software. Applicable to 6500 platforms. |
| STR cdx6500NMNPIflashIdAlt | 1.3.6.1.4.1.449.2.1.1.2.2.10 | DisplayString | read-only | Name and version of software contained by the alternate bank of flash (if installed). Applicable to 6520 platforms. |
| STR cdx6500NMNPIflashIdCur | 1.3.6.1.4.1.449.2.1.1.2.2.9 | DisplayString | read-only | Name and version of software stored in flash. This refers to the currently selected bank of flash when there is an alternate bank of flash installed. |
| INT cdx6500NMNPIflashSizeAlt | 1.3.6.1.4.1.449.2.1.1.2.2.12 | INTEGER | read-only | Size of software in the alternate bank of flash (bytes). Applicable to 6520 platforms. |
| INT cdx6500NMNPIflashSizeCur | 1.3.6.1.4.1.449.2.1.1.2.2.11 | INTEGER | read-only | Size of software stored in flash. This refers to the currently selected bank of flash when there is an alternate bank of flash installed. |
| INT cdx6500NMNPIflashStatus | 1.3.6.1.4.1.449.2.1.1.2.2.8 | INTEGER | read-only | The status of use of flash memory. Applicable only to 6500 platforms. newvalEnabled : same functionality as 'enabled', new enumeration added for RFC1155 compatibility. |
| STR cdx6500NMNPIinventAssy | 1.3.6.1.4.1.449.2.1.1.2.2.13.1.6 | DisplayString | read-only | The assembly number of the board |
| INT cdx6500NMNPIinventBoard | 1.3.6.1.4.1.449.2.1.1.2.2.13.1.1 | INTEGER | read-only | The board number. This is used to index the boards in a node. |
| STR cdx6500NMNPIinventDIM1 | 1.3.6.1.4.1.449.2.1.1.2.2.13.1.8 | DisplayString | read-only | The type of interface specified by DIM 1. |
| STR cdx6500NMNPIinventDIM2 | 1.3.6.1.4.1.449.2.1.1.2.2.13.1.9 | DisplayString | read-only | The type of interface specified by DIM 2. |
| cdx6500NMNPIinventEntry | 1.3.6.1.4.1.449.2.1.1.2.2.13.1 | not-accessible | Each entry contains a board number, board type, number of ports, status, and serial number. | |
| STR cdx6500NMNPIinventPortConfig | 1.3.6.1.4.1.449.2.1.1.2.2.14.1.2 | DisplayString | read-only | The port configuration on each board. |
| cdx6500NMNPIinventPortConfigEntry | 1.3.6.1.4.1.449.2.1.1.2.2.14.1 | not-accessible | Each entry contains a port configuration. | |
| cdx6500NMNPIinventPortConfigTable | 1.3.6.1.4.1.449.2.1.1.2.2.14 | not-accessible | A list of the node's Port Configuration. | |
| INT cdx6500NMNPIinventPortNum | 1.3.6.1.4.1.449.2.1.1.2.2.14.1.1 | INTEGER | read-only | The port number. This is used to index the ports in a node. |
| INT cdx6500NMNPIinventPorts | 1.3.6.1.4.1.449.2.1.1.2.2.13.1.3 | INTEGER | read-only | The number of I/O ports for this board. |
| STR cdx6500NMNPIinventRev | 1.3.6.1.4.1.449.2.1.1.2.2.13.1.7 | DisplayString | read-only | The revision level of the board |
| STR cdx6500NMNPIinventSerial | 1.3.6.1.4.1.449.2.1.1.2.2.13.1.5 | DisplayString | read-only | The serial number of the board |
| STR cdx6500NMNPIinventStatus | 1.3.6.1.4.1.449.2.1.1.2.2.13.1.4 | DisplayString | read-only | The status of the board |
| cdx6500NMNPIinventTable | 1.3.6.1.4.1.449.2.1.1.2.2.13 | not-accessible | A list of the node's boards. | |
| STR cdx6500NMNPIinventType | 1.3.6.1.4.1.449.2.1.1.2.2.13.1.2 | DisplayString | read-only | The board type. A description of the type of board. |
| cdx6500NMNPinvent | 1.3.6.1.4.1.449.2.1.1.2.2 | |||
| STR cdx6500NMNPIproductType | 1.3.6.1.4.1.449.2.1.1.2.2.1 | DisplayString | read-only | Identifies a general class of feature set for the product, e.g. 6504PLUS Asynchronous PAD or 6520 Branch Node |
| STR cdx6500NMNPIpromRevision | 1.3.6.1.4.1.449.2.1.1.2.2.4 | DisplayString | read-only | The PROM software revision. |
| INT cdx6500NMNPIserialNum | 1.3.6.1.4.1.449.2.1.1.2.2.3 | INTEGER | read-only | The serial number of the motherboard. |
| INT cdx6500NMNPIsoftwareSrc | 1.3.6.1.4.1.449.2.1.1.2.2.2 | INTEGER | read-only | The source of software currently running on the node. prom - CPU running from code in PROM. download - CPU downloading code into RAM. promLoadingRAM - CPU running from code in RAM. newvalProm - same functionality as 'prom', new enumeration added for RFC1155 compatibility. |
| INT cdx6500NMNPSbuffDataAvail | 1.3.6.1.4.1.449.2.1.1.2.3.18 | INTEGER | read-only | The number of data buffers available. Applicable to all platforms. |
| GAU cdx6500NMNPSbuffDataGauge | 1.3.6.1.4.1.449.2.1.1.2.3.20 | Gauge | read-only | The maximum number of data buffers in use since last reset Applicable to all platforms. |
| STR cdx6500NMNPSbuffDataGaugeTime | 1.3.6.1.4.1.449.2.1.1.2.3.47 | DisplayString | read-only | Time stamp of Max number of data buffers in use since the last reset. Applicable to all platforms. |
| INT cdx6500NMNPSbuffDataUse | 1.3.6.1.4.1.449.2.1.1.2.3.19 | INTEGER | read-only | The number of data buffers in use. Applicable to all platforms. |
| INT cdx6500NMNPSbuffMgtAvail | 1.3.6.1.4.1.449.2.1.1.2.3.24 | INTEGER | read-only | The number of management buffers available. Applicable to all platforms except VG100. |
| GAU cdx6500NMNPSbuffMgtExhaust | 1.3.6.1.4.1.449.2.1.1.2.3.26 | Gauge | read-only | The number of times the management buffer pool has been exhausted since last reset. Applicable to all platforms except VG100. |
| GAU cdx6500NMNPSbuffMgtGauge | 1.3.6.1.4.1.449.2.1.1.2.3.50 | Gauge | read-only | The maximum number of management buffers in use since the last reset. Applicable to all platforms except VG100. |
| STR cdx6500NMNPSbuffMgtGaugeTime | 1.3.6.1.4.1.449.2.1.1.2.3.51 | DisplayString | read-only | Time stamp of Max number of management buffers in use since the last reset. Applicable to all platforms except VG100. |
| INT cdx6500NMNPSbuffMgtUse | 1.3.6.1.4.1.449.2.1.1.2.3.25 | INTEGER | read-only | The number of management buffers in use. Applicable to all platforms except VG100. |
| INT cdx6500NMNPSbuffPacketAvail | 1.3.6.1.4.1.449.2.1.1.2.3.21 | INTEGER | read-only | The number of packet buffers available. Applicable to all platforms except VG100 . |
| GAU cdx6500NMNPSbuffPacketExhaust | 1.3.6.1.4.1.449.2.1.1.2.3.23 | Gauge | read-only | The number of times the packet buffer pool has been exhausted since last reset. Applicable to all platforms except VG100. |
| GAU cdx6500NMNPSbuffPacketGauge | 1.3.6.1.4.1.449.2.1.1.2.3.48 | Gauge | read-only | The maximum number of packet buffers in use since the last reset. Applicable to all platforms except VG100. |
| STR cdx6500NMNPSbuffPacketGaugeTime | 1.3.6.1.4.1.449.2.1.1.2.3.49 | DisplayString | read-only | Time stamp of Max number of packet buffers in use since the last reset. Applicable to all platforms except VG100. |
| INT cdx6500NMNPSbuffPacketUse | 1.3.6.1.4.1.449.2.1.1.2.3.22 | INTEGER | read-only | The number of packet buffers in use. Applicable to all platforms except VG100. |
| INT cdx6500NMNPScallsInPlaceCur | 1.3.6.1.4.1.449.2.1.1.2.3.12 | INTEGER | read-only | Number of X.25 calls. The number of calls currently in place. |
| GAU cdx6500NMNPScallsInPlaceMax | 1.3.6.1.4.1.449.2.1.1.2.3.13 | Gauge | read-only | Number of X.25 calls gauge. The maximum number of calls since the last reset. |
| STR cdx6500NMNPScallsInPlaceMaxTime | 1.3.6.1.4.1.449.2.1.1.2.3.44 | DisplayString | read-only | Time stamp of Max number of calls since the last reset. |
| INT cdx6500NMNPScallsPerSecCur | 1.3.6.1.4.1.449.2.1.1.2.3.14 | INTEGER | read-only | Rate of X.25 calls. The number of calls/sec. currently in place. |
| GAU cdx6500NMNPScallsPerSecMax | 1.3.6.1.4.1.449.2.1.1.2.3.15 | Gauge | read-only | Rate of X.25 calls gauge. The maximum number of calls/sec. since the last reset. |
| STR cdx6500NMNPScallsPerSecMaxTime | 1.3.6.1.4.1.449.2.1.1.2.3.46 | DisplayString | read-only | Time stamp of Max number of calls/sec since the last reset. |
| INT cdx6500NMNPScmemSizeComp | 1.3.6.1.4.1.449.2.1.1.2.3.8 | INTEGER | read-only | Size of compressed configuration memory available (free) in bytes. |
| INT cdx6500NMNPScmemSizeUncomp | 1.3.6.1.4.1.449.2.1.1.2.3.10 | INTEGER | read-only | Size of uncompressed configuration memory available (free) in bytes. |
| INT cdx6500NMNPScmemUseComp | 1.3.6.1.4.1.449.2.1.1.2.3.9 | INTEGER | read-only | Size of compressed configuration memory in use in bytes. |
| INT cdx6500NMNPScmemUseUnComp | 1.3.6.1.4.1.449.2.1.1.2.3.11 | INTEGER | read-only | Size of uncompressed configuration memory in use in bytes. |
| INT cdx6500NMNPScpuUtil | 1.3.6.1.4.1.449.2.1.1.2.3.35 | INTEGER | read-only | Percentage of time the CPU processed traffic data (as opposed performing diagnositic tests or processing node control data) to in the last 64 seconds. Applicable to 6520 platforms. |
| INT cdx6500NMNPSdefaultNode | 1.3.6.1.4.1.449.2.1.1.2.3.39 | INTEGER | not-accessible | A control object. Setting to value default will cause the current configuration of the entire node to change back to the default settings. CAUTION: If you implement the Default Node control, communications are disrupted and data could be lost after a boot. In addition, configuration settings are lost unless they had been saved to an external device. |
| INT cdx6500NMNPSDisplayLEDdiag | 1.3.6.1.4.1.449.2.1.1.2.3.38 | INTEGER | read-only | Front panel fault (or service) LED. Applicable to 6520 platforms. newvalOff : same functionality as 'off', new enumeration added for RFC1155 compatibility. |
| INT cdx6500NMNPSDisplayLEDstatus | 1.3.6.1.4.1.449.2.1.1.2.3.37 | INTEGER | read-only | Front panel status LED. Applicable to 6520 platforms. newvalOff : same functionality as 'off', new enumeration added for RFC1155 compatibility. |
| STR cdx6500NMNPSDisplayNumImage | 1.3.6.1.4.1.449.2.1.1.2.3.36 | DisplayString | read-only | Front panel numeric display. Applicable to 6520 platforms. |
| STR cdx6500NMNPSevLastOccConfig | 1.3.6.1.4.1.449.2.1.1.2.3.5 | DisplayString | read-only | The last time the configuration memory was changed or downloaded. |
| STR cdx6500NMNPSevLastOccPower | 1.3.6.1.4.1.449.2.1.1.2.3.1 | DisplayString | read-only | The last time the node was turned on. |
| STR cdx6500NMNPSevLastOccReboot | 1.3.6.1.4.1.449.2.1.1.2.3.3 | DisplayString | read-only | The last time the node was rebooted. |
| STR cdx6500NMNPSevLastOccReset | 1.3.6.1.4.1.449.2.1.1.2.3.2 | DisplayString | read-only | The last time the reset button was pressed. |
| STR cdx6500NMNPSevLastOccWDTimer | 1.3.6.1.4.1.449.2.1.1.2.3.4 | DisplayString | read-only | The last time the watch dog timer expired. |
| INT cdx6500NMNPSMaxcpuUtil | 1.3.6.1.4.1.449.2.1.1.2.3.54 | INTEGER | read-only | Peak CPU Utilization since last node or statistics reset. Applicable to 6520 platforms. |
| STR cdx6500NMNPSMaxcpuUtilTime | 1.3.6.1.4.1.449.2.1.1.2.3.55 | DisplayString | read-only | Time stamp of Peak CPU Utilization since last node or statistics reset. Applicable to 6520 platforms. |
| INT cdx6500NMNPSmemDram | 1.3.6.1.4.1.449.2.1.1.2.3.32 | INTEGER | read-only | Amount of memory used for data buffers in bytes. Applicable to 6520 platforms. |
| INT cdx6500NMNPSmemEprom | 1.3.6.1.4.1.449.2.1.1.2.3.31 | INTEGER | read-only | Amount of memory available on the processor card in bytes. Applicable to 6520 platforms. |
| INT cdx6500NMNPSmemFlashAlt | 1.3.6.1.4.1.449.2.1.1.2.3.34 | INTEGER | read-only | The size of the alternate flash module in bytes. Applicable to 6520 platforms. |
| INT cdx6500NMNPSmemFlashCur | 1.3.6.1.4.1.449.2.1.1.2.3.33 | INTEGER | read-only | The size of the flash module in bytes. This refers to the currently selected bank of flash when there is an alternate bank of flash installed. Applicable to 6520 platforms. |
| INT cdx6500NMNPSpvcConnectCur | 1.3.6.1.4.1.449.2.1.1.2.3.16 | INTEGER | read-only | Permanent virtual circuit connections. The number currently in place. |
| GAU cdx6500NMNPSPVCConnectMax | 1.3.6.1.4.1.449.2.1.1.2.3.17 | Gauge | read-only | Permanent virtual circuit connections. The maximum since the last reset. |
| STR cdx6500NMNPSPVCConnectMaxTime | 1.3.6.1.4.1.449.2.1.1.2.3.45 | DisplayString | read-only | Time stamp of Max number of PVC connections since the last reset. |
| INT cdx6500NMNPSrateCurChar | 1.3.6.1.4.1.449.2.1.1.2.3.27 | INTEGER | read-only | Node throughput, number of current chararacters/second for the node. |
| INT cdx6500NMNPSrateCurPkt | 1.3.6.1.4.1.449.2.1.1.2.3.28 | INTEGER | read-only | Node throughput, number of current packets/second for the node. |
| GAU cdx6500NMNPSrateMaxChar | 1.3.6.1.4.1.449.2.1.1.2.3.29 | Gauge | read-only | Node throughput gauge, Number of maximum characters/second for the node since last reset |
| STR cdx6500NMNPSrateMaxCharTime | 1.3.6.1.4.1.449.2.1.1.2.3.52 | DisplayString | read-only | Time stamp of Max node throughput (chars/sec) since the last reset. |
| GAU cdx6500NMNPSrateMaxPkt | 1.3.6.1.4.1.449.2.1.1.2.3.30 | Gauge | read-only | Node throughput gauge, Number of maximum packets/second for the node since last reset |
| STR cdx6500NMNPSrateMaxPktTime | 1.3.6.1.4.1.449.2.1.1.2.3.53 | DisplayString | read-only | Time stamp of Max node throughput (packets/sec) since the last reset. |
| INT cdx6500NMNPSresetStatAll | 1.3.6.1.4.1.449.2.1.1.2.3.41 | INTEGER | write-only | A value of reset will cause statistics to be reset on all ports. A value of noReset has no effect. |
| cdx6500NMNPSresetStatEntry | 1.3.6.1.4.1.449.2.1.1.2.3.40.1 | not-accessible | Each entry contains a port number and a control to reset statistics for that port. | |
| INT cdx6500NMNPSresetStatPort | 1.3.6.1.4.1.449.2.1.1.2.3.40.1.1 | INTEGER | not-accessible | The port number value for this object directs the statistics reset command to that port. |
| INT cdx6500NMNPSresetStatStatus | 1.3.6.1.4.1.449.2.1.1.2.3.40.1.2 | INTEGER | write-only | A value of reset will cause a port's statistics to be reset. A value of noReset has no effect. |
| cdx6500NMNPSresetStatTable | 1.3.6.1.4.1.449.2.1.1.2.3.40 | not-accessible | A list of Port Statistic Reset entries. | |
| INT cdx6500NMNPSstatsBoard | 1.3.6.1.4.1.449.2.1.1.2.3.43.1.1 | INTEGER | read-only | Board number. Applicable to 6500 platforms. |
| INT cdx6500NMNPSstatsbuffDataAvail | 1.3.6.1.4.1.449.2.1.1.2.3.43.1.2 | INTEGER | read-only | The number of data buffers available. Applicable to 6500 platforms. |
| GAU cdx6500NMNPSstatsbuffDataGauge | 1.3.6.1.4.1.449.2.1.1.2.3.43.1.4 | Gauge | read-only | The maximum number of data buffers in use since last reset Applicable to 6500 platforms. |
| INT cdx6500NMNPSstatsbuffDataUse | 1.3.6.1.4.1.449.2.1.1.2.3.43.1.3 | INTEGER | read-only | The number of data buffers in use. Applicable to 6500 platforms. |
| INT cdx6500NMNPSstatscpuUtil | 1.3.6.1.4.1.449.2.1.1.2.3.43.1.8 | INTEGER | read-only | Percentage of time the CPU processed traffic data (as opposed performing diagnositic tests or processing node control data) to in the last 64 seconds. Applicable to 6500 platforms. |
| cdx6500NMNPSstatsEntry | 1.3.6.1.4.1.449.2.1.1.2.3.43.1 | not-accessible | A Board statistics Table entry. Each entry contains statistics parameters for a single board. Applicable to 6500 platforms. | |
| INT cdx6500NMNPSstatsMaxcpuUtil | 1.3.6.1.4.1.449.2.1.1.2.3.43.1.9 | INTEGER | read-only | Peak CPU Utilization since last node or statistics reset. Applicable to 6500 platforms. |
| STR cdx6500NMNPSstatsMaxcpuUtilTime | 1.3.6.1.4.1.449.2.1.1.2.3.43.1.10 | DisplayString | read-only | Time stamp of Peak CPU Utilization since last node or statistics reset. Applicable to 6500 platforms. |
| INT cdx6500NMNPSstatsmemDram | 1.3.6.1.4.1.449.2.1.1.2.3.43.1.6 | INTEGER | read-only | Amount of memory used for data buffers in bytes. Applicable to 6500 platforms. |
| INT cdx6500NMNPSstatsmemEprom | 1.3.6.1.4.1.449.2.1.1.2.3.43.1.5 | INTEGER | read-only | Amount of memory available on the processor card in bytes. Applicable to 6500 platforms. |
| INT cdx6500NMNPSstatsmemFlash | 1.3.6.1.4.1.449.2.1.1.2.3.43.1.7 | INTEGER | read-only | The size of the flash module in bytes. This refers to the currently selected bank of flash when there is an alternate bank of flash installed. Applicable to 6500 platforms. |
| cdx6500NMNPSstatsTable | 1.3.6.1.4.1.449.2.1.1.2.3.43 | not-accessible | Board specific statistics. Applicable to 6500 platforms. | |
| INT cdx6500NMNPSstatusFan | 1.3.6.1.4.1.449.2.1.1.2.3.6 | INTEGER | read-only | The operational status of the cooling fan. newvalNotMonitored : same functionality as 'notMonitored', new enumeration added for RFC1155 compatibility. |
| STR cdx6500NMNPSstatusPowerSy | 1.3.6.1.4.1.449.2.1.1.2.3.42 | DisplayString | read-only | The operational status of the power supply. This object replaces cdx6500NMNPSstatusPwrSy. |
| INT cdx6500NMNPSstatusPwrSy | 1.3.6.1.4.1.449.2.1.1.2.3.7 | INTEGER | read-only | The operational status of the power supply. This object is being replaced by cdx6500NMNPSstatusPowerSy. newvalNotMonitored : same functionality as 'notMonitored', new enumeration added for RFC1155 compatibility. |
| cdx6500NMNPstats | 1.3.6.1.4.1.449.2.1.1.2.3 | |||
| cdx6500NMReportEntry | 1.3.6.1.4.1.449.2.1.1.3.1.1 | not-accessible | A row of Report Statistics parameters. | |
| cdx6500NMReportTable | 1.3.6.1.4.1.449.2.1.1.3.1 | not-accessible | All of the statistics parameters relevant to the Report event log table. | |
| INT cdx6500NMreptClearLog | 1.3.6.1.4.1.449.2.1.1.3.2 | INTEGER | write-only | Clears the Operator log. clearLog - Clear the Log noClearLog - Do not clear the Log. |
| cdx6500NMSNMPGroup | 1.3.6.1.4.1.449.2.1.1.1 | |||
| INT cdx6500NMV54BadMsgsReceived | 1.3.6.1.4.1.449.2.1.1.3.3.11 | INTEGER | read-only | Number of bad messages received |
| INT cdx6500NMV54CurrentTestPort | 1.3.6.1.4.1.449.2.1.1.3.3.13 | INTEGER | read-write | Current test port. |
| INT cdx6500NMV54GoodMsgsReceived | 1.3.6.1.4.1.449.2.1.1.3.3.10 | INTEGER | read-only | Number of good messages received |
| INT cdx6500NMV54LastPortTested | 1.3.6.1.4.1.449.2.1.1.3.3.12 | INTEGER | read-only | Last port to be put in loopback. |
| INT cdx6500NMV54LocalLoop | 1.3.6.1.4.1.449.2.1.1.3.3.1 | INTEGER | write-only | Local loop test; The test will start when set to value 'startTest'. |
| INT cdx6500NMV54Loop2 | 1.3.6.1.4.1.449.2.1.1.3.3.2 | INTEGER | write-only | Loopback test 2 : Loop at remote modem digital side. |
| INT cdx6500NMV54Loop3 | 1.3.6.1.4.1.449.2.1.1.3.3.3 | INTEGER | write-only | Loopback test 3: Loop at local modem analog side. |
| cdx6500NMV54Loopback | 1.3.6.1.4.1.449.2.1.1.3.3 | |||
| CTR cdx6500NMV54LoopbackBadMsgsReceived | 1.3.6.1.4.1.449.2.1.1.3.3.20 | Counter | read-only | Number of bad messages received |
| INT cdx6500NMV54LoopbackCurrentTestPort | 1.3.6.1.4.1.449.2.1.1.3.3.17 | INTEGER | read-write | Current test port. Value zero means that no port has been specified. When test completes, this object is defaulted to zero. |
| INT cdx6500NMV54LoopbackDuration | 1.3.6.1.4.1.449.2.1.1.3.3.5 | INTEGER | read-write | Duration of loopback in seconds. |
| CTR cdx6500NMV54LoopbackGoodMsgsReceived | 1.3.6.1.4.1.449.2.1.1.3.3.19 | Counter | read-only | Number of good messages received |
| INT cdx6500NMV54LoopbackLastPortTested | 1.3.6.1.4.1.449.2.1.1.3.3.16 | INTEGER | read-only | Last port put in loopback. |
| CTR cdx6500NMV54LoopbackMessagesSent | 1.3.6.1.4.1.449.2.1.1.3.3.18 | Counter | read-only | Number of messages sent |
| INT cdx6500NMV54LoopbackStatus | 1.3.6.1.4.1.449.2.1.1.3.3.7 | INTEGER | read-only | Loopback Status. v54Starting - test is being prepared to start. v54Running - test in progress. v54Stopping - test is being stopped. v54Clearing - system is clearing resources used for the test. v54Stopped - test has been completed. v54AbortPortDisabled - selected port is disabled. v54AbortIsRunning - test is already running on the specified port. v54AbortPortNull - selected port is of NULL type. v54AbortEiaDisc - interface has been disconnected during the test. v54AbortCpuNotRunning - CPU is not running on the specified port. v54AbortNotSupported - specified test is not supported by the selected port. v54AbortWrongParams - specified test params are incorrect. Check port number. v54AbortWrongPort - specified port is incorrect. v54NotRun - test has not been run yet. |
| INT cdx6500NMV54LoopbackTest | 1.3.6.1.4.1.449.2.1.1.3.3.14 | INTEGER | read-write | Starts and stops loopback test. |
| INT cdx6500NMV54LoopbackTestType | 1.3.6.1.4.1.449.2.1.1.3.3.15 | INTEGER | read-write | Loopback test type. v54LocalLoop - creates a loop on the selected port. v54Loop2 - creates a loop on the remote modem digital side. v54Loop3 - creates a loop on the local modem analog side. dsuInternal - creates a loop on the internal interface. dsuInternalExternal - creates a loop on the internal and the external interfaces. |
| INT cdx6500NMV54MessagesSent | 1.3.6.1.4.1.449.2.1.1.3.3.9 | INTEGER | read-only | Number of messages sent |
| INT cdx6500NMV54TestType | 1.3.6.1.4.1.449.2.1.1.3.3.6 | INTEGER | read-only | Loopback test type. |
| INT cdx6500NMV54turnLoopbackOff | 1.3.6.1.4.1.449.2.1.1.3.3.4 | INTEGER | write-only | A control to turn any loopback test off |
| cdx6500NodeMgmt | 1.3.6.1.4.1.449.2.1.1 | |||
| STR cdx6500NUITAcctName | 1.3.6.1.4.1.449.2.1.2.2.7.1.2 | DisplayString | read-only | This is the account name for billing records. |
| INT cdx6500NUITEntryNumber | 1.3.6.1.4.1.449.2.1.2.2.7.1.1 | INTEGER | read-only | This is not a configurable parameter. Instead, it identifies the particular NUI/Password Table entry being configured by the other parameters in the record. |
| INT cdx6500NUITPADPromptNum | 1.3.6.1.4.1.449.2.1.2.2.7.1.4 | INTEGER | read-only | This parameter specifies which entry in the PAD Prompt Table is used as a PAD prompt after the user has entered a valid password. Use 0 for standard asterisk prompt. |
| STR cdx6500NUITPasswd | 1.3.6.1.4.1.449.2.1.2.2.7.1.3 | DisplayString | read-only | This is the password for the account name. |
| cdx6500OSTCSISOptionStatEntry | 1.3.6.1.4.1.449.2.1.3.2.5.1 | not-accessible | A list of objects describing a single Software Option. | |
| cdx6500OSTCSISOptionStatTable | 1.3.6.1.4.1.449.2.1.3.2.5 | not-accessible | A table describing the Software Options that have been purchased and enabled for this node. | |
| cdx6500OSTCSISPortUsageEntry | 1.3.6.1.4.1.449.2.1.3.2.6.1 | not-accessible | A list of authorization statistics for a single port. | |
| cdx6500OSTCSISPortUsageTable | 1.3.6.1.4.1.449.2.1.3.2.6 | not-accessible | A table providing statistics on unauthorized port usage. | |
| cdx6500PCTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.1 | |||
| INT cdx6500PortNumber | 1.3.6.1.4.1.449.2.1.2.1.9.1.1 | INTEGER | read-only | Port Number which is installed. |
| cdx6500PPSTallPortsEntry | 1.3.6.1.4.1.449.2.1.3.1.1.18.1 | not-accessible | A row of allPorts statistics parameters. | |
| cdx6500PPSTallPortsTable | 1.3.6.1.4.1.449.2.1.3.1.1.18 | not-accessible | All of the statistics parameters relevant to the allPorts table. | |
| cdx6500PSTLANConnectionGroup | 1.3.6.1.4.1.449.2.1.3.1.6 | |||
| cdx6500PSTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.1 | |||
| cdx6500PSTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.3 | |||
| STR cdx6500PVCSetupDestination | 1.3.6.1.4.1.449.2.1.2.2.5.1.3 | DisplayString | read-write | This is the PVC destination channel identifier. Entries are not case sensitive. For example: BCST route calls to the broadcast module. MX25-2s3(2) route calls to MX25 port 2, station 3, channel 2. PAD-5 route calls to PAD port 5. P54S9(22) route calls to port 54, station 9, channel 22. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1(5) route calls to X25 port 1, channel 5. |
| INT cdx6500PVCSetupEntryNumber | 1.3.6.1.4.1.449.2.1.2.2.5.1.1 | INTEGER | read-only | This is not a configurable parameter. This identifies the particular PVC Table entry being configured by the other parameters in the record. |
| STR cdx6500PVCSetupSource | 1.3.6.1.4.1.449.2.1.2.2.5.1.2 | DisplayString | read-write | This is the PVC source channel identifier. Entries are not case sensitive. For example: BCST route calls to the broadcast module. MX25-2s3(2) route calls to MX25 port 2, station 3, channel 2. PAD-5 route calls to PAD port 5. P54S9(22) route calls to port 54, station 9, channel 22. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1(5) route calls to X25 port 1, channel 5. |
| STR cdx6500reptEvent | 1.3.6.1.4.1.449.2.1.1.3.1.1.2 | DisplayString | read-only | Report Log Alarm Text |
| INT cdx6500reptIndex | 1.3.6.1.4.1.449.2.1.1.3.1.1.1 | INTEGER | not-accessible | Report Log Index |
| INT cdx6500RoutSVCAddress | 1.3.6.1.4.1.449.2.1.2.2.1.1.2 | INTEGER | read-only | This is a non-supported object. It has been replaced by cdx6500RoutSVCAddress1. |
| STR cdx6500RoutSVCAddress1 | 1.3.6.1.4.1.449.2.1.2.2.1.1.19 | DisplayString | read-write | Network address for calls routed beyond this node. A route selection entry is not needed for calls destined within this node: PAD port or node resource (for example, control port) calls. The wild card(match anything) character is * and can also be part of the entry. When set to (blank), this parameter is ignored. |
| STR cdx6500RoutSVCDestination1 | 1.3.6.1.4.1.449.2.1.2.2.1.1.3 | DisplayString | read-write | This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource. |
| STR cdx6500RoutSVCDestination2 | 1.3.6.1.4.1.449.2.1.2.2.1.1.5 | DisplayString | read-write | This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource. |
| STR cdx6500RoutSVCDestination3 | 1.3.6.1.4.1.449.2.1.2.2.1.1.7 | DisplayString | read-write | This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource. |
| STR cdx6500RoutSVCDestination4 | 1.3.6.1.4.1.449.2.1.2.2.1.1.9 | DisplayString | read-write | This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource. |
| STR cdx6500RoutSVCDestination5 | 1.3.6.1.4.1.449.2.1.2.2.1.1.11 | DisplayString | read-write | This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource. |
| STR cdx6500RoutSVCDestination6 | 1.3.6.1.4.1.449.2.1.2.2.1.1.13 | DisplayString | read-write | This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource. |
| STR cdx6500RoutSVCDestination7 | 1.3.6.1.4.1.449.2.1.2.2.1.1.15 | DisplayString | read-write | This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource. |
| STR cdx6500RoutSVCDestination8 | 1.3.6.1.4.1.449.2.1.2.2.1.1.17 | DisplayString | read-write | This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource. |
| INT cdx6500RoutSVCEntryNumber | 1.3.6.1.4.1.449.2.1.2.2.1.1.1 | INTEGER | read-only | This is not a configurable parameter. This identifies the particular Route Selection Table entry being configured by the other parameters in the record. |
| INT cdx6500RoutSVCPriority1 | 1.3.6.1.4.1.449.2.1.2.2.1.1.4 | INTEGER | read-write | This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest. |
| INT cdx6500RoutSVCPriority2 | 1.3.6.1.4.1.449.2.1.2.2.1.1.6 | INTEGER | read-write | This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest. |
| INT cdx6500RoutSVCPriority3 | 1.3.6.1.4.1.449.2.1.2.2.1.1.8 | INTEGER | read-write | This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest. |
| INT cdx6500RoutSVCPriority4 | 1.3.6.1.4.1.449.2.1.2.2.1.1.10 | INTEGER | read-write | This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest. |
| INT cdx6500RoutSVCPriority5 | 1.3.6.1.4.1.449.2.1.2.2.1.1.12 | INTEGER | read-write | This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest. |
| INT cdx6500RoutSVCPriority6 | 1.3.6.1.4.1.449.2.1.2.2.1.1.14 | INTEGER | read-write | This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest. |
| INT cdx6500RoutSVCPriority7 | 1.3.6.1.4.1.449.2.1.2.2.1.1.16 | INTEGER | read-write | This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest. |
| INT cdx6500RoutSVCPriority8 | 1.3.6.1.4.1.449.2.1.2.2.1.1.18 | INTEGER | read-write | This specifies the priority for call forwarding to ports within the Route Selection Table. Call forwarding is determined by a combination of priority and load conditions. 0 - backup port. 1 to 15 - 1 is the highest priority and 15, the lowest. |
| INT cdx6500SNMPAgentTimer | 1.3.6.1.4.1.449.2.1.1.1.3 | INTEGER | read-write | An internal timer used by the SNMP agent, unit is a 20 ms tick. |
| INT cdx6500SNMPBootAgent | 1.3.6.1.4.1.449.2.1.1.1.5 | INTEGER | write-only | A control object. Setting to value `boot' will cause the SNMP agent to boot. |
| INT cdx6500SNMPEntryStatus | 1.3.6.1.4.1.449.2.1.1.1.9.1.5 | INTEGER | read-write | Table row status. Setting the value to deleted removes the entry from the table. |
| INT cdx6500SNMPGenTrapsType | 1.3.6.1.4.1.449.2.1.1.1.8 | INTEGER | read-write | Choice between generic traps as defined in RFC or correponding enterprise specific traps to be generated by the node. This attribute is applicable only when generic traps are being generated and there exists a corresponding enterprise specific trap. |
| STR cdx6500SNMPIpAddress | 1.3.6.1.4.1.449.2.1.1.1.11 | DisplayString | read-write | IP address for this node. |
| STR cdx6500SNMPLastTrap | 1.3.6.1.4.1.449.2.1.1.1.7 | DisplayString | read-only | The interesting information portion of the last trap PDU issued by the SNMP Agent. |
| INT cdx6500SNMPMaxNumOfTraps | 1.3.6.1.4.1.449.2.1.1.1.9.1.2 | INTEGER | read-write | Number of traps allowed to be generated in the throttling period. |
| INT cdx6500SNMPNewTrapLevel | 1.3.6.1.4.1.449.2.1.1.1.9.1.4 | INTEGER | read-write | New severity level for the trap. |
| STR cdx6500SNMPPrimUDPChan | 1.3.6.1.4.1.449.2.1.1.1.1 | DisplayString | read-write | The primary UDP port used by the SNMP Agent has a default value of 161. |
| INT cdx6500SNMPResetStats | 1.3.6.1.4.1.449.2.1.1.1.6 | INTEGER | write-only | A control object, which when set to value `reset', will cause the SNMP agent to reset all its statistics. |
| STR cdx6500SNMPSecUDPChan | 1.3.6.1.4.1.449.2.1.1.1.2 | DisplayString | read-write | The secondary UDP port used by the SNMP Agent has a default value of 162. |
| INT cdx6500SNMPSetControl | 1.3.6.1.4.1.449.2.1.1.1.10 | INTEGER | read-only | Snmp Set operation control off : snmp set operation is not allowed on : snmp set operation is allowed. |
| INT cdx6500SNMPThrottlingPeriod | 1.3.6.1.4.1.449.2.1.1.1.9.1.3 | INTEGER | read-write | Throttling time period in seconds. Value 0 means trap is not throttled. |
| INT cdx6500SNMPTrapEnable | 1.3.6.1.4.1.449.2.1.1.1.4 | INTEGER | read-write | A control object to disable or enable the SNMP agent's trap send capability. newvalDisable : same functionality as 'disable', new enumeration added for RFC1155 compatibility. |
| INT cdx6500SNMPTrapNumber | 1.3.6.1.4.1.449.2.1.1.1.9.1.1 | INTEGER | read-only | Trap number to be throttled. |
| cdx6500SNMPTrapThrottleEntry | 1.3.6.1.4.1.449.2.1.1.1.9.1 | not-accessible | Entry representing throttling parameters. | |
| cdx6500SNMPTrapThrottleTable | 1.3.6.1.4.1.449.2.1.1.1.9 | not-accessible | Throttling table. | |
| cdx6500SPSTallStationsEntry | 1.3.6.1.4.1.449.2.1.3.1.3.8.1 | not-accessible | A row of allStations statistics parameters. | |
| cdx6500SPSTallStationsTable | 1.3.6.1.4.1.449.2.1.3.1.3.8 | not-accessible | All of the statistics parameters relevant to the allStations table. | |
| cdx6500statControls | 1.3.6.1.4.1.449.2.1.4.4 | |||
| cdx6500Statistics | 1.3.6.1.4.1.449.2.1.3 | |||
| cdx6500StatNetworkSvcsGroup | 1.3.6.1.4.1.449.2.1.3.4 | |||
| cdx6500StatOtherStatsGroup | 1.3.6.1.4.1.449.2.1.3.2 | |||
| cdx6500StatProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1 | |||
| INT cdx6500statResetAllStats | 1.3.6.1.4.1.449.2.1.4.4.1 | INTEGER | write-only | A control object that when set to reset will cause the node to reset ALL its statistics. reset - reset ALL node statistics. noReset - Do not reset the statistics. |
| STR cdx6500StatSVCCalledChannel | 1.3.6.1.4.1.449.2.1.3.4.1.1.3 | DisplayString | read-only | Called channel of SVC. |
| STR cdx6500StatSVCCallingChannel | 1.3.6.1.4.1.449.2.1.3.4.1.1.2 | DisplayString | read-only | Calling channel of SVC. |
| INT cdx6500StatSVCClosedUserGroup | 1.3.6.1.4.1.449.2.1.3.4.1.1.7 | INTEGER | read-only | Closed user group facility on/off. notRequested - Closed user group facility off. requested - Closed user group facility on. newvalNotRequested - same functionality as 'notRequested', new enumeration added for RFC1155 compatibility. |
| STR cdx6500StatSVCConnectionUPTime | 1.3.6.1.4.1.449.2.1.3.4.1.1.8 | DisplayString | read-only | Time at which connection was up. |
| cdx6500StatSVCEntry | 1.3.6.1.4.1.449.2.1.3.4.1.1 | not-accessible | A list of objects describing a single SVC. | |
| INT cdx6500StatSVCFastSelect | 1.3.6.1.4.1.449.2.1.3.4.1.1.5 | INTEGER | read-only | Fast select facility condition. noFastSelect - Fast select facility is not selected. fastSelect - Fast select facility is selected. newvalNoFastSelect - same functionality as 'noFastSelect', new enumeration added for RFC1155 compatibility. |
| INT cdx6500StatSVCIndex | 1.3.6.1.4.1.449.2.1.3.4.1.1.1 | INTEGER | read-only | It is position in the list of SVC's. |
| INT cdx6500StatSVCNetUserIdentification | 1.3.6.1.4.1.449.2.1.3.4.1.1.6 | INTEGER | read-only | Net user identifiaction facility condition. notRequested - Net user identifiaction facility not requested. requested - Net user identifiaction facility requested. newvalNotRequested - same functionality as 'notRequested', new enumeration added for RFC1155 compatibility. |
| INT cdx6500StatSVCReverseCharge | 1.3.6.1.4.1.449.2.1.3.4.1.1.4 | INTEGER | read-only | Reverse charge facility condition. refuse - Refused the condition. accept - Accepted the condition. newvalRefuse - same functionality as 'refuse', new enumeration added for RFC1155 compatibility. |
| cdx6500StatSVCTable | 1.3.6.1.4.1.449.2.1.3.4.1 | not-accessible | A table of currently active switched virtual circuits (SVC). The table is dynamic i.e. changing as queries are being performed on the table. | |
| cdx6500StatTFTPGroup | 1.3.6.1.4.1.449.2.1.3.3 | |||
| cdx6500T3E3ContEntry | 1.3.6.1.4.1.449.2.1.4.23.1 | not-accessible | Each control applies to a single T3E3 port. | |
| cdxProductSpecific | 1.3.6.1.4.1.449.2 | |||
| codex | 1.3.6.1.4.1.449 | |||
| INT t3e3ContPortControl | 1.3.6.1.4.1.449.2.1.4.23.1.2 | INTEGER | write-only | Control operations for the specified T3E3 port. boot - Boots the T3E3 port enable - Enables the T3E3 port disable - Disables the T3E3 port resetstats - Resets the T3E3 port statistics. |
| INT t3e3ContPortNumber | 1.3.6.1.4.1.449.2.1.4.23.1.1 | INTEGER | not-accessible | Port number of the T3E3 port. |
RFC description
Provides SNMP access to Motorola/Codex 6500 node management, configuration, and statistics.
Start monitoring Motorola/Codex CDX 6500 statistical multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.