All MIBs › CDX-6500-COMMON-MIB › cdx6500PVCSetupDestination
cdx6500PVCSetupDestination
Module: CDX-6500-COMMON-MIB
OID (symbolic): CDX-6500-COMMON-MIB::cdx6500PVCSetupDestination
OID (numeric): 1.3.6.1.4.1.449.2.1.2.2.5.1.3
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This is the PVC destination channel identifier. Entries are not case sensitive. For example: BCST route calls to the broadcast module. MX25-2s3(2) route calls to MX25 port 2, station 3, channel 2. PAD-5 route calls to PAD port 5. P54S9(22) route calls to port 54, station 9, channel 22. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1(5) route calls to X25 port 1, channel 5.
What is cdx6500PVCSetupDestination?
This sets the case-insensitive destination channel identifier for the same permanent virtual circuit, using the same address notation as cdx6500PVCSetupSource. Together, these two objects fully define a fixed point-to-point circuit through the node that stays connected without call setup signaling, unlike the switched virtual calls handled by the Route Selection table. For example, pairing a Source of 'PAD-5' with a Destination of 'MX25-2s3(2)' permanently wires PAD port 5 through to MX25 port 2, station 3, channel 2.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.5.1.3 snmpwalk -v2c -c public <target> CDX-6500-COMMON-MIB::cdx6500PVCSetupDestination
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.5.1.3.1 snmpget -v2c -c public <target> CDX-6500-COMMON-MIB::cdx6500PVCSetupDestination.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.449.2.1.2.2.5.1.3.1 s <value>
Start monitoring Motorola/Codex CDX 6500 statistical multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CDX-6500-COMMON-MIB::cdx6500PVCSetupDestination OID value, configure state conditions and alerts, and monitor any Motorola/Codex CDX 6500 statistical multiplexer (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.2 | cdx6500CfgGeneralGroup | CDX-6500-COMMON-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.5 | cdx6500GCTPVCSetupTable | CDX-6500-COMMON-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.5.1 | cdx6500GCTPVCSetupEntry | CDX-6500-COMMON-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.5.1.3 | cdx6500PVCSetupDestination | CDX-6500-COMMON-MIB |