CDX-6500-COMMON-MIB :: cdx6500NMV54LoopbackTestType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCDX-6500-COMMON-MIBcdx6500NMV54LoopbackTestType

cdx6500NMV54LoopbackTestType

Module: CDX-6500-COMMON-MIB

OID (symbolic): CDX-6500-COMMON-MIB::cdx6500NMV54LoopbackTestType

OID (numeric): 1.3.6.1.4.1.449.2.1.1.3.3.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Loopback test type. v54LocalLoop - creates a loop on the selected port. v54Loop2 - creates a loop on the remote modem digital side. v54Loop3 - creates a loop on the local modem analog side. dsuInternal - creates a loop on the internal interface. dsuInternalExternal - creates a loop on the internal and the external interfaces.

What is cdx6500NMV54LoopbackTestType?

This read-write object selects which of five loopback variants to run on the currently selected port: local loop, remote-digital loop2, remote-analog loop3, or one of two internal DSU loops (internal only, or internal plus external). Compared to the older per-type write-only triggers earlier in this MIB, this consolidated object adds the two DSU-internal options, letting an admin isolate faults to the node's own built-in DSU circuitry rather than just the attached modem. For example, setting this to dsuInternal would confirm whether a suspected problem is inside the node's DSU itself, before ever involving the external modem in troubleshooting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.1.3.3.15
snmpwalk -v2c -c public <target> CDX-6500-COMMON-MIB::cdx6500NMV54LoopbackTestType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.1.3.3.15.1
snmpget -v2c -c public <target> CDX-6500-COMMON-MIB::cdx6500NMV54LoopbackTestType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.449.2.1.1.3.3.15.1 i <value>

Start monitoring Motorola/Codex CDX 6500 statistical multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CDX-6500-COMMON-MIB::cdx6500NMV54LoopbackTestType OID value, configure state conditions and alerts, and monitor any Motorola/Codex CDX 6500 statistical multiplexer (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.449codexALC-OPT-MIB
1.3.6.1.4.1.449.2cdxProductSpecificALC-OPT-MIB
1.3.6.1.4.1.449.2.1cdx6500ALC-OPT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.449.2.1.1cdx6500NodeMgmtCDX-6500-COMMON-MIB
1.3.6.1.4.1.449.2.1.1.3cdx6500NMDiagnosticsGroupCDX-6500-COMMON-MIB
1.3.6.1.4.1.449.2.1.1.3.3cdx6500NMV54LoopbackCDX-6500-COMMON-MIB
1.3.6.1.4.1.449.2.1.1.3.3.15cdx6500NMV54LoopbackTestTypeCDX-6500-COMMON-MIB