All MIBs › CDX-6500-COMMON-MIB › cdx6500RoutSVCDestination2
cdx6500RoutSVCDestination2
Module: CDX-6500-COMMON-MIB
OID (symbolic): CDX-6500-COMMON-MIB::cdx6500RoutSVCDestination2
OID (numeric): 1.3.6.1.4.1.449.2.1.2.2.1.1.5
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This specifies the network address to which calls are routed. For example: BCST route calls to the broadcast module. BSC2780-4 route calls to BSC2780 port 4. BSC3270-9 route calls to BSC3270 port 9. MX25-2s3 route calls to MX25 port 2, station 3. PAD-5 route calls to PAD port 5. P54s9 route calls to port 54, station 9. SDLC-4s5 route calls to SDLC port 4, station 5. X25-1 route calls to X25 port 1. BOSTON route backup calls to BOSTON resource.
What is cdx6500RoutSVCDestination2?
This sets the network address for destination slot 2 in this route selection entry, using the same address formats as slot 1 (BCST, port-protocol combinations, or port-and-station notation). An admin typically configures this as a fallback destination behind slot 1, so calls spill over here if the first destination's priority and load conditions send them elsewhere. For example, setting this to 'BSC3270-9' would route overflow calls to BSC3270 port 9 whenever slot 1's destination isn't chosen for a given call.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.1.1.5 snmpwalk -v2c -c public <target> CDX-6500-COMMON-MIB::cdx6500RoutSVCDestination2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.2.1.1.5.1 snmpget -v2c -c public <target> CDX-6500-COMMON-MIB::cdx6500RoutSVCDestination2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.449.2.1.2.2.1.1.5.1 s <value>
Start monitoring Motorola/Codex CDX 6500 statistical multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CDX-6500-COMMON-MIB::cdx6500RoutSVCDestination2 OID value, configure state conditions and alerts, and monitor any Motorola/Codex CDX 6500 statistical multiplexer (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.2 | cdx6500CfgGeneralGroup | CDX-6500-COMMON-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.1 | cdx6500GCTRouteSelectionTable | CDX-6500-COMMON-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.1.1 | cdx6500GCTRouteSelectionEntry | CDX-6500-COMMON-MIB |
| 1.3.6.1.4.1.449.2.1.2.2.1.1.5 | cdx6500RoutSVCDestination2 | CDX-6500-COMMON-MIB |