39 modules from World Wide Packets
World Wide Packets (WWP), a metro-Ethernet equipment maker later acquired by Ciena and folded into its LEOS platform branding, contributes a set of WWP-* MIBs covering carrier Ethernet access and aggregation switches. The recurring subject matter is Metro Ethernet service delivery rather than general enterprise switching: per-port containment/rate-limiting and 802.1X access control, Layer 2 control-frame tunneling and egress port restriction for service-provider VLANs, IGMP snooping, and system-level DHCP client, NTP, syslog, and physical-module/environmental health reporting. If you manage a WWP or Ciena LEOS-branded carrier Ethernet switch, look here for the service-provider-specific tunneling, containment, and per-service QoS objects (including the 410-series-specific QoS MIB) that sit alongside the standard bridge and interface MIBs those devices also implement. Note that many of these modules are configuration-only with no populated runtime data samples available, so verify against your actual firmware release which WWP-LEOS-* variant your device supports.
| Module | Description |
|---|---|
| WWP-8021X-MIB | Covers 802.1X port-based network access control on World Wide Packets equipment, including authenticator settings and per-client status. |
| WWP-APPLICATIONS-MIB | Defines World Wide Packets application management objects for software module status and operational configuration. |
| WWP-COMMUNITY-MIB | Manages World Wide Packets SNMP community string access control and management interface security. |
| WWP-CONTAINMENT-MIB | Manages World Wide Packets broadcast storm containment thresholds and rate-limiting policy configuration. |
| WWP-DHCP-CLIENT-MIB | Manages World Wide Packets DHCP client interface lease status, server addresses, and renewal configuration. |
| WWP-DNS-CLIENT-MIB | Manages World Wide Packets DNS client resolver configuration, server list, and domain search parameters. |
| WWP-EGRESS-PORT-RESTRICTION-MIB | Manages World Wide Packets egress port traffic restrictions and forwarding policy for Metro Ethernet services. |
| WWP-ENVIRON-MIB | Monitors World Wide Packets device environmental sensors including temperature, fan speed, and power supply status. |
| WWP-ESM-MIB | Manages World Wide Packets Ethernet Switch Module port configuration, VLAN membership, and switching statistics. |
| WWP-EXT-BRIDGE-MIB | Manages World Wide Packets extended 802.1D bridge configuration including port states and MAC forwarding. |
| WWP-EXT-BRIDGE-TRAP-MIB | Defines World Wide Packets extended bridge SNMP trap notifications for topology change and port state events. |
| WWP-FILE-TRANSFER-MIB | Manages World Wide Packets file transfer operations for firmware upgrades and configuration backup/restore. |
| WWP-GENERIC-IGMP-SNOOP-MIB | Manages World Wide Packets generic IGMP snooping group membership and multicast stream forwarding control. |
| WWP-IGMP-SNOOP-MIB | Manages World Wide Packets IGMP snooping querier settings, group tables, and multicast forwarding entries. |
| WWP-IP-INTERFACE-MIB | Manages World Wide Packets IP interface addressing, subnet configuration, and routing gateway settings. |
| WWP-L2-CF-TUNNEL-MIB | Manages World Wide Packets Layer 2 control frame tunnel configuration for Metro Ethernet service providers. |
| WWP-LAYER4-FILTER-MIB | Manages World Wide Packets Layer 4 traffic classification filters and policy-based forwarding rules. |
| WWP-LEOS-COMMUNITY-MIB | Manages World Wide Packets LEOS SNMP community string definitions and management access security. |
| WWP-LEOS-FILTER-MIB | Manages World Wide Packets LEOS traffic filter rules for packet classification and forwarding policy. |
| WWP-LEOS-OSPF-MIB | Manages World Wide Packets LEOS OSPF routing process configuration, neighbor adjacency, and LSA database. |
| WWP-LEOS-SYSTEM-CONTROL-MIB | Manages World Wide Packets LEOS system control operations including reboot, reset, and service restart. |
| WWP-LEOS-TABLE-CHG-NOTIF-MIB | Defines World Wide Packets LEOS SNMP notifications for configuration table change events and updates. |
| WWP-MAC-MGMT-MIB | Manages World Wide Packets MAC address table entries, aging timers, and static address configuration. |
| WWP-MULTI-DHCP-CLIENT-MIB | Handles multiple concurrent DHCP client instances on World Wide Packets equipment, tracking per-interface lease state and server selection. |
| WWP-NTP-MIB | Manages World Wide Packets NTP client time server configuration and clock synchronization status. |
| WWP-OAM-MIB | Manages World Wide Packets Ethernet OAM link event notification, fault detection, and loopback operations. |
| WWP-PHYSICAL-MODULE-MIB | Monitors World Wide Packets physical module hardware inventory, insertion status, and component health. |
| WWP-PORT-STATS-MIB | Monitors World Wide Packets per-port traffic counters including frames, bytes, errors, and utilization. |
| WWP-QOS-410-MIB | Manages World Wide Packets QoS policy for 410-series Metro Ethernet switches including queue scheduling. |
| WWP-QOS-MIB | Covers quality of service settings on World Wide Packets equipment, including traffic classification and scheduling policies. |
| WWP-RADIUS-CLIENT-MIB | Manages World Wide Packets RADIUS authentication client configuration, server list, and accounting statistics. |
| WWP-SYSLOG-COLLECTOR-MIB | Manages World Wide Packets syslog collector remote server configuration and message forwarding settings. |
| WWP-SYSLOG-MIB | Manages World Wide Packets syslog message logging severity levels, facility codes, and output destinations. |
| WWP-SYSTEM-CONFIG-APPS-MIB | Manages World Wide Packets system application configuration, startup settings, and running configuration persistence. |
| WWP-SYSTEM-CONTROL-MIB | Manages World Wide Packets system control operations including device reboot and software reset functions. |
| WWP-SYSTEM-MIB | Monitors World Wide Packets system hardware status, software version, uptime, and operational health. |
| WWP-VOICE-GATEWAY-MIB | Manages World Wide Packets voice gateway port configuration, call routing, and VoIP interface status. |
| WWP-VOIP-MIB | Manages World Wide Packets VoIP configuration, SIP trunk settings, and voice quality monitoring statistics. |
| WWP-XCVR-MIB | Monitors World Wide Packets optical transceiver module diagnostics including Tx/Rx power and temperature levels. |