WWP-VOICE-GATEWAY-MIB

All MIBs › WWP-VOICE-GATEWAY-MIB

Organization: World Wide Packets, Inc

Last Updated: 2002-11-18

Category: World Wide Packets Metro Ethernet

Description: Manages World Wide Packets voice gateway port configuration, call routing, and VoIP interface status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-VOICE-GATEWAY-MIB?

This is a vendor-specific proprietary MIB from World Wide Packets (WWP) defining managed objects for its VoIP voice gateway product line, which bridges traditional voice circuits to SIP-based IP telephony. It exposes configuration and status data for voice gateway ports, SIP call routing parameters, dial timers, and codec preferences. It supports monitoring of software/service status in the sense that SIP server connectivity tests, dial-timer settings, and codec configuration all directly affect whether voice calls can be established and sustained, making them useful indicators of gateway health. There is no explicit dependency on other MIBs noted, though the gateway's physical ports likely also appear in standard interface MIBs (e.g., ifTable) for basic link status. It is typically deployed in enterprise or carrier VoIP access networks where WWP gateways interconnect legacy voice trunks with a SIP-based softswitch or IP-PBX. Engineers can download the WWP-VOICE-GATEWAY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-VOICE-GATEWAY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

World Wide Packets voice gateway appliance
VoIP media/SIP gateway

Monitoring Examples

An administrator would poll wwpVoiceGatewayTestServerConnection to verify the gateway can reach its configured SIP registrar/proxy, which would reveal a network or SIP server outage if the test fails. Checking wwpVoiceGatewaySipDialTimerLong helps confirm the dial timeout is appropriately set; a misconfigured value can cause dropped calls or false busy signals. Reviewing wwpVoiceGatewaySIPPreferredCodec across gateways can surface a codec mismatch that produces call setup failures or interoperability issues with a downstream carrier.

What Can Be Monitored

SIP server connection test result
SIP dial timer configuration
preferred SIP codec setting
voice gateway port status
call routing configuration

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

From WWP-SMI

wwpModules

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT wwpMgmtAccess	1.3.6.1.4.1.6141.2.43.1.1.7.2	INTEGER	read-write	Setting this object to 'deny' will disable access to SMI from VMI when connected via Telnet or console.
INT wwpVoiceAccess	1.3.6.1.4.1.6141.2.43.1.1.7.1	INTEGER	read-write	Setting this object to 'deny' will disable access to VMI from SMI when connected via Telnet or console.
INT wwpVoiceAutonomousFaxState	1.3.6.1.4.1.6141.2.43.1.1.10.1	INTEGER	read-write	Setting this object to 'enable' will configure the device to enable autonomous fax behavior. Setting this object to 'disable' will configure the device to disable autonomous fax behavior.
INT wwpVoiceCallAgentEgressEvent	1.3.6.1.4.1.6141.2.43.1.1.8.2	INTEGER	read-write	Setting this object to 'sendIngressEgressNotif' will configure the device to send ingress and egress fax and modem tone notification. Setting this object to 'sendIngressNotif' will configure the device to send only ingress fax and modem tone notification.
INT wwpVoiceCallAgentOtaModes	1.3.6.1.4.1.6141.2.43.1.1.8.1	INTEGER	read-write	Setting this object to 'ifOtaRecv' will configure the device to send OTA if and only if OTA is received from call Agent. Setting this object to 'sendOta' will configure the device to always send OTA sdp parameters.
INT wwpVoiceCallAgentPotsLine	1.3.6.1.4.1.6141.2.43.1.1.9.1	INTEGER	read-write	Setting this object to 'enable1PotLine' will configure the device to enable Line 1 only. Setting this object to 'enable2PotLine' will configure the device to enable 2 pots lines. Device 'may' require reboot to enable pot line changes.
INT wwpVoiceEndPointName	1.3.6.1.4.1.6141.2.43.1.1.11.1	INTEGER	read-write	Setting this object will control how a voip endpoint name will be determined. This object cannot be set to 'unknown'.
wwpVoiceGateway	1.3.6.1.4.1.6141.2.43.1.1
wwpVoiceGatewayAudio	1.3.6.1.4.1.6141.2.43.1.1.4
STR wwpVoiceGatewayCallAgentAddr	1.3.6.1.4.1.6141.2.43.1.1.1.2	DisplayString	read-write	This object is used to configure either the domain name or the IP address of the Call Agent in standard dot notation. The complete address of a default call agent is composed of IP address/Domain Name and UDP port. wwpVoiceGatewayCallAgentAddr specifies address of the Call Agent to which RSIP(RestartInProgress) message is sent whenever system starts up or line goes up. Call agent address may be an IP address or fully qualified domain name (FQDN). This object should be set to zero length string if the Management Stations wish to attempt to obtain the CA address from a DNS server (highest priority MGCP CA is chosen).
INT wwpVoiceGatewayCallAgentProtocol	1.3.6.1.4.1.6141.2.43.1.1.1.4	INTEGER	read-write	Setting this object to 'rfc2705' will enable support of RFC 2705 for this CallAgent (Only 'L' Event Package). Setting this object to 'ncs1.0' will enable support of PacketCable NCS 1.0 for the CallAgent. Setting this object to 'mgcp1Ncs1NoPackages' will enable support of Mgcp 1.0 Ncs 1.0 no event package for the CallAgent.
I32 wwpVoiceGatewayCallAgentUDPPort	1.3.6.1.4.1.6141.2.43.1.1.1.3	Integer32	read-write	This object is used to configure the UDP port of the Call Agent. The UDP port is used together with wwpVoiceGatewayCallAgentAddr to specify the destination address of the call agent to which RSIP message is sent when system starts up or line goes up.
wwpVoiceGatewayCodec	1.3.6.1.4.1.6141.2.43.1.1.3
INT wwpVoiceGatewayCodecOverride	1.3.6.1.4.1.6141.2.43.1.1.17.1	INTEGER	read-write	Selecting data codec override forces the default data codec to the specified value, overriding the standard default data codec which is tied to country code. 1 = force specification of G711 PCMU as default codec 2 = force specification of G711 PCMA as default codec
INT wwpVoiceGatewayComplexCodec	1.3.6.1.4.1.6141.2.43.1.1.3.1	INTEGER	read-write	Setting this object to 'g711(0)' will only enable G711U and G711A Codec. If this object is set to 'g729(3)', then G729A and G729AB Codec will be used.
wwpVoiceGatewayConfigCallAgent	1.3.6.1.4.1.6141.2.43.1.1.8
wwpVoiceGatewayConfigCodecOverride	1.3.6.1.4.1.6141.2.43.1.1.17
wwpVoiceGatewayConfigEndPoint	1.3.6.1.4.1.6141.2.43.1.1.11
wwpVoiceGatewayConfigFax	1.3.6.1.4.1.6141.2.43.1.1.10
wwpVoiceGatewayConfigJitterBuffer	1.3.6.1.4.1.6141.2.43.1.1.13
wwpVoiceGatewayConfigJitterBufferMaxPeriod	1.3.6.1.4.1.6141.2.43.1.1.15
wwpVoiceGatewayConfigJitterBufferMinPeriod	1.3.6.1.4.1.6141.2.43.1.1.14
wwpVoiceGatewayConfigJitterBufferTargetPeriod	1.3.6.1.4.1.6141.2.43.1.1.16
wwpVoiceGatewayConfigLastServerResponseTime	1.3.6.1.4.1.6141.2.43.1.1.19
wwpVoiceGatewayConfigNotifEntityCache	1.3.6.1.4.1.6141.2.43.1.1.12
wwpVoiceGatewayConfigPots	1.3.6.1.4.1.6141.2.43.1.1.9
wwpVoiceGatewayConfigProtocolEnable	1.3.6.1.4.1.6141.2.43.1.1.22
wwpVoiceGatewayConfigProtocolType	1.3.6.1.4.1.6141.2.43.1.1.21
wwpVoiceGatewayConfigTestServerConnection	1.3.6.1.4.1.6141.2.43.1.1.18
wwpVoiceGatewayCountry	1.3.6.1.4.1.6141.2.43.1.1.2
INT wwpVoiceGatewayCountryCodes	1.3.6.1.4.1.6141.2.43.1.1.2.1	INTEGER	read-write	This object specifies the country for different tone and ring settings.
T/F wwpVoiceGatewayDropVoicePktsDuringEvents	1.3.6.1.4.1.6141.2.43.1.1.4.3	TruthValue	read-write	Setting this object to 'true' will cause the voice gateway to drop voice packets during RFC2833 Telephone Event packets.
INT wwpVoiceGatewayEchoCancellation	1.3.6.1.4.1.6141.2.43.1.1.3.3	INTEGER	read-write	Setting this object to 'false' will disable the echo cancellation for the complex codes specified by wwpVoiceGatewayComplexCodec.
STR wwpVoiceGatewayEndpoint	1.3.6.1.4.1.6141.2.43.1.1.1.1.1.2	DisplayString	read-write	The endpoint for the voice Gateway. This object should be set to a zero length string if the Management Station wish to use the Endpoint's IP Address as the Endpoint Domain Name. Endpoint identifiers have two parts: The domain name of the gateway that is managing the endpoint. A local name within the gateway. The local name is hierarchical, for example, the local name of circuit number 13 in a multiplexed trunk that is connected to the physical interface named XYZ would be named as XYZ/13.
wwpVoiceGatewayEndPointEntry	1.3.6.1.4.1.6141.2.43.1.1.1.1.1		not-accessible	An entry of the voice gateway endpoint.
I32 wwpVoiceGatewayEndPointId	1.3.6.1.4.1.6141.2.43.1.1.1.1.1.1	Integer32	read-only	Index for the the endpoint entry.
wwpVoiceGatewayEndPointTable	1.3.6.1.4.1.6141.2.43.1.1.1.1		not-accessible	A table of the voice gateway endpoints.
T/F wwpVoiceGatewayHookFlashEnable	1.3.6.1.4.1.6141.2.43.1.1.20.9.1	TruthValue	read-write	Setting this object to 'true' will configure the device to process hook flash events.. Setting this object to 'false' will configure the device to ignore hookflash events.
I32 wwpVoiceGatewayIntervalJitter	1.3.6.1.4.1.6141.2.43.1.1.5.6	Integer32	read-only	An estimate of the statistical variance of the RTP data packet interarrival time measured in milliseconds and expressed as an unsigned integer. The interarrival jitter J is defined to be the mean deviation (smoothed absolute value) of the difference D in packet spacing at the receiver compared to the sender for a pair of packets.
OCT wwpVoiceGatewayLastServerResponseTime	1.3.6.1.4.1.6141.2.43.1.1.19.1	OCTET STRING	read-only	Last server response timestamp. Used as part of testing voice server connectivity
I32 wwpVoiceGatewayLatency	1.3.6.1.4.1.6141.2.43.1.1.5.7	Integer32	read-only	An estimate of the network latency, expressed in milliseconds. This is the average value of the difference between the NTP timestamp indicated by the senders of the RTCP messages and the NTP timestamp of the receivers, measured when this messages are received.
wwpVoiceGatewayMGCP	1.3.6.1.4.1.6141.2.43.1.1.1
wwpVoiceGatewayMIB	1.3.6.1.4.1.6141.2.43			This MIB module degines the managed objects for WWP voice gateway.
wwpVoiceGatewayMIBCompliances	1.3.6.1.4.1.6141.2.43.3.1
wwpVoiceGatewayMIBConformance	1.3.6.1.4.1.6141.2.43.3
wwpVoiceGatewayMIBGroups	1.3.6.1.4.1.6141.2.43.3.2
wwpVoiceGatewayMIBNotificationPrefix	1.3.6.1.4.1.6141.2.43.2
wwpVoiceGatewayMIBNotifications	1.3.6.1.4.1.6141.2.43.2.0
wwpVoiceGatewayMIBObjects	1.3.6.1.4.1.6141.2.43.1
U32 wwpVoiceGatewayNumResets	1.3.6.1.4.1.6141.2.43.1.1.6.1	Unsigned32	read-only	This object defines the number of times that the voice gateway has been restarted.
C32 wwpVoiceGatewayOctetsRx	1.3.6.1.4.1.6141.2.43.1.1.5.4	Counter32	read-only	The total number of payload octets (i.e., not including header or padding) transmitted in RTP data packets by the voice gateway since starting transmission on this connection.
C32 wwpVoiceGatewayOctetsTx	1.3.6.1.4.1.6141.2.43.1.1.5.2	Counter32	read-only	The total number of payload octets (i.e., not including header or padding) transmitted in RTP data packets by the voice gateway since starting transmission on this connection.
I32 wwpVoiceGatewayPacketizationMaxPeriod	1.3.6.1.4.1.6141.2.43.1.1.3.5	Integer32	read-write	Max packet time for the complex codes specified by wwpVoiceGatewayComplexCodec. FOR G723 the packet time is fixed to be 30ms.
I32 wwpVoiceGatewayPacketizationMinPeriod	1.3.6.1.4.1.6141.2.43.1.1.3.4	Integer32	read-write	Min packet time for the complex codes specified by wwpVoiceGatewayComplexCodec. FOR G723 the packet time is fixed to be 30ms.
I32 wwpVoiceGatewayPayloadType	1.3.6.1.4.1.6141.2.43.1.1.4.1	Integer32	read-write	The Payload Format for the telephone events.
C32 wwpVoiceGatewayPktsLost	1.3.6.1.4.1.6141.2.43.1.1.5.5	Counter32	read-only	The total number of RTP data packets that have been lost since the beginning of reception. This number is defined to be the number of packets expected less the number of packets actually received, where the number of packets received includes any which are late or duplicates.
C32 wwpVoiceGatewayPktsRx	1.3.6.1.4.1.6141.2.43.1.1.5.3	Counter32	read-only	The total number of RTP data packets received by the voice gateway since starting reception on this connection.
C32 wwpVoiceGatewayPktsTx	1.3.6.1.4.1.6141.2.43.1.1.5.1	Counter32	read-only	The total number of RTP data packets transmitted by the voice gateway since starting transmission on this connection.
T/F wwpVoiceGatewayProtocolEnable	1.3.6.1.4.1.6141.2.43.1.1.22.1	TruthValue	read-write	Configuration to enable VoIP protocol. Setting this value to 'enable' will cause VoIP stack to start at bootup
INT wwpVoiceGatewayProtocolType	1.3.6.1.4.1.6141.2.43.1.1.21.1	INTEGER	read-write	Configuration to select VoIP protocol. Setting this value to 'mgcp' will allow the configuration the MGCP funtionality. Setting this value to 'sip' will allow the configuration the SIP funtionality
INT wwpVoiceGatewayReset	1.3.6.1.4.1.6141.2.43.1.1.6.2	INTEGER	read-write	Writing one of the specified values to this field causes the specified type of reboot to occur. none is the value returned when this leaf is queried. writing this value to the leaf will have no effect. reset causes the voice gateway to restart using its current configuration. resetDefault will reset the voice gateway to factory defaults.
INT wwpVoiceGatewayResetStatCounters	1.3.6.1.4.1.6141.2.43.1.1.5.8	INTEGER	read-write	To reset voice statistic counters , this object should be set to 'reset'. A read on this object should return none(0).
T/F wwpVoiceGatewayRsipKeepAliveEnable	1.3.6.1.4.1.6141.2.43.1.1.1.6	TruthValue	read-write	Setting this object to 'enable' will configure the device to send periodic RSIP x-keepalive messages.
I32 wwpVoiceGatewayRsipKeepAliveInterval	1.3.6.1.4.1.6141.2.43.1.1.1.7	Integer32	read-write	Configures the interval at which RSIP x-keepalive messages are transmitted
T/F wwpVoiceGatewaySendEventsViaRFC2833	1.3.6.1.4.1.6141.2.43.1.1.4.2	TruthValue	read-write	Setting this object to 'true' will cause the voice gateway to send Telephone Events via RFC2833 signalling using wwpVoiceGatewayPayloadType.
INT wwpVoiceGatewaySilenceSuppression	1.3.6.1.4.1.6141.2.43.1.1.3.2	INTEGER	read-write	Setting this object to 'false' will disable the silence suppression for the complex codes specified by wwpVoiceGatewayComplexCodec.
wwpVoiceGatewaySIP	1.3.6.1.4.1.6141.2.43.1.1.20
wwpVoiceGatewaySIPCallFeatures	1.3.6.1.4.1.6141.2.43.1.1.20.9
OCT wwpVoiceGatewaySipDialPlan	1.3.6.1.4.1.6141.2.43.1.1.20.4.1.6	OCTET STRING	read-write	Configuration for dial plan expression string. Note: subset of unix regular expressions supported.
I32 wwpVoiceGatewaySipDialTimerLong	1.3.6.1.4.1.6141.2.43.1.1.20.5.1.2	Integer32	read-write	Long Timeout for SIP dialing
INT wwpVoiceGatewaySIPDtmfEventHandling	1.3.6.1.4.1.6141.2.43.1.1.20.8	INTEGER	read-write	Configuration for device to send DTMF digits via SIP INFO message or in RTP RFC2833 event message in addition to the audio tone in RTP stream. The default is always an audio tone sent in the RTP stream.
INT wwpVoiceGatewaySipForceQuotesState	1.3.6.1.4.1.6141.2.43.1.1.20.3	INTEGER	read-write	Configuration to force display names to be embraced by double quotes.
I32 wwpVoiceGatewaySipLineId	1.3.6.1.4.1.6141.2.43.1.1.20.4.1.1	Integer32	read-only	Pots port Id
wwpVoiceGatewaySIPLogServers	1.3.6.1.4.1.6141.2.43.1.1.20.6.3
wwpVoiceGatewaySipPhoneLineEntry	1.3.6.1.4.1.6141.2.43.1.1.20.4.1		not-accessible	table of sip line configuration
wwpVoiceGatewaySipPhoneLineTable	1.3.6.1.4.1.6141.2.43.1.1.20.4		not-accessible	SIP Pots Line table This table confures users for each POTs line
wwpVoiceGatewaySipPhoneLineTimerEntry	1.3.6.1.4.1.6141.2.43.1.1.20.5.1		not-accessible	Table of sip phone line configuration
wwpVoiceGatewaySipPhoneLineTimerTable	1.3.6.1.4.1.6141.2.43.1.1.20.5		not-accessible	SIP Pots Line table This table configures users for each POTs line
OCT wwpVoiceGatewaySipPhoneNumber	1.3.6.1.4.1.6141.2.43.1.1.20.4.1.2	OCTET STRING	read-create	Phone Number associated with this line.
INT wwpVoiceGatewaySIPPreferredCodec	1.3.6.1.4.1.6141.2.43.1.1.20.7	INTEGER	read-write	Configuration to set preferred codec.
STR wwpVoiceGatewaySipProxyAddr	1.3.6.1.4.1.6141.2.43.1.1.20.6.1.1	DisplayString	read-write	The complete address of a default Proxy is composed of IP address/Domain Name and UDP port. wwpVoiceGatewayRegistrarAddr specifies address of the Proxy server to which SIP messages are sent. Proxy address may be an IP address or fully qualified domain name (FQDN).
I32 wwpVoiceGatewaySipProxyPort	1.3.6.1.4.1.6141.2.43.1.1.20.6.1.2	Integer32	read-write	This object is used to configure the UDP port of the SIP Proxy Server. The UDP port is used together with wwpVoiceGatewaySipProxyAddr to specify the destination address of the Proxy to which SIP messages are sent.
wwpVoiceGatewaySIPProxyServers	1.3.6.1.4.1.6141.2.43.1.1.20.6.1
I32 wwpVoiceGatewaySipRegisterTimeoutPeriod	1.3.6.1.4.1.6141.2.43.1.1.20.2	Integer32	read-write	Configures registration expiration time in seconds. Used only when registrar is used. Set value to 0 to disable.
STR wwpVoiceGatewaySipRegistrarAddr	1.3.6.1.4.1.6141.2.43.1.1.20.6.2.1	DisplayString	read-write	The complete address of a default Registrar is composed of IP address/Domain Name and UDP port. wwpVoiceGatewayRegistrarAddr specifies address of the Regsitrar to which SIP Registration messages are sent whenever system starts or line goes up. Registrar address may be an IP address or fully qualified domain name (FQDN).
I32 wwpVoiceGatewaySipRegistrarPort	1.3.6.1.4.1.6141.2.43.1.1.20.6.2.2	Integer32	read-write	This object is used to configure the UDP port of the SIP Registrar. The UDP port is used together with wwpVoiceGatewaySipRegistrarAddr to specify the destination addressto which SIP Registration messages are sent when system starts or line goes up.
wwpVoiceGatewaySIPRegistrarServers	1.3.6.1.4.1.6141.2.43.1.1.20.6.2
wwpVoiceGatewaySIPServers	1.3.6.1.4.1.6141.2.43.1.1.20.6
I32 wwpVoiceGatewaySipSessionTimeoutPeriod	1.3.6.1.4.1.6141.2.43.1.1.20.1	Integer32	read-write	Configures session expiration time in seconds. Set value to 0 to disable
STR wwpVoiceGatewaySipSyslogAddr	1.3.6.1.4.1.6141.2.43.1.1.20.6.3.1	DisplayString	read-write	The complete address of a default SIP SysLog server is composed of IP address/Domain Name and UDP port. wwpVoiceGatewaySipSyslogAddr specifies address of the SIP SysLog server to which SIP Log messages are sent. SysLog server address may be an IP address or fully qualified domain name (FQDN).
INT wwpVoiceGatewaySipSyslogLogLevel	1.3.6.1.4.1.6141.2.43.1.1.20.6.3.3	INTEGER	read-write	This object is used to configure the log level or verbosity of the SIP messages
I32 wwpVoiceGatewaySipSyslogPort	1.3.6.1.4.1.6141.2.43.1.1.20.6.3.2	Integer32	read-write	This object is used to configure the UDP port of the SIP Log Servert. The UDP port is used together with wwpVoiceGatewaySipSyslogAddr to specify the destination address to which SIP Log mesaages are sent when system starts or line goes up.
I32 wwpVoiceGatewaySipTimerLineId	1.3.6.1.4.1.6141.2.43.1.1.20.5.1.1	Integer32	read-only	Pots port Id
OCT wwpVoiceGatewaySipUserDisplayName	1.3.6.1.4.1.6141.2.43.1.1.20.4.1.4	OCTET STRING	read-create	User Display Name associated with this line.
OCT wwpVoiceGatewaySipUserName	1.3.6.1.4.1.6141.2.43.1.1.20.4.1.3	OCTET STRING	read-create	User Name associated with this line.
OCT wwpVoiceGatewaySipUserPassword	1.3.6.1.4.1.6141.2.43.1.1.20.4.1.5	OCTET STRING	read-create	User Password associated with this line.
T/F wwpVoiceGatewaySquelchInbandDtmfAudio	1.3.6.1.4.1.6141.2.43.1.1.4.4	TruthValue	read-write	Setting this object to 'true' will cause the voice gateway to Squelch the Inband DTMF Audio.
wwpVoiceGatewayStats	1.3.6.1.4.1.6141.2.43.1.1.5
T/F wwpVoiceGatewaySupportMessagePiggybacking	1.3.6.1.4.1.6141.2.43.1.1.1.5	TruthValue	read-write	Setting this object to 'false' will disable message Piggybacking for this Voice Gateway.
INT wwpVoiceGatewayTestServerConnection	1.3.6.1.4.1.6141.2.43.1.1.18.1	INTEGER	read-write	Writing one of the specified values to this field causes mesages to be sent to voice server to test connectivity
I32 wwpVoiceJitterBufferMaxPeriod	1.3.6.1.4.1.6141.2.43.1.1.15.1	Integer32	read-write	Maximum Holding time. Setting this value will limit the jitter buffer from adapting above this value. The largest period is fixed at 300ms.
I32 wwpVoiceJitterBufferMinPeriod	1.3.6.1.4.1.6141.2.43.1.1.14.1	Integer32	read-write	Minimum Holding time. Setting this value will limit the jitter buffer from adapting below this value. The smallest period is fixed at 20ms.
I32 wwpVoiceJitterBufferTargetPeriod	1.3.6.1.4.1.6141.2.43.1.1.16.1	Integer32	read-write	Target Holding time. Setting this value sets the initial jitter buffer size.
INT wwpVoiceJitterOptionState	1.3.6.1.4.1.6141.2.43.1.1.13.1	INTEGER	read-write	Setting this object to 'enable' will configure the jitter buffer to change to an adaptive jitter buffer size. Setting this object to 'disable' will configure the jitter buffer to use a fixed jitter buffer size.
I32 wwpVoiceNotifEntCache	1.3.6.1.4.1.6141.2.43.1.1.12.1	Integer32	read-write	Timeout in minutes for cached DNS lookups for MGCP RQNT Notified Entity field
wwpVoiceReset	1.3.6.1.4.1.6141.2.43.1.1.6
wwpVoiceSec	1.3.6.1.4.1.6141.2.43.1.1.7

RFC description

Manages voice gateway configuration including MGCP, codec settings, call agent, and jitter buffer parameters.

Start monitoring World Wide Packets voice gateway appliance, VoIP media/SIP gateway (SIP call-routing/dial-timer/codec config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-VOICE-GATEWAY-MIB

What Is WWP-VOICE-GATEWAY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description