WWP-ENVIRON-MIB

All MIBs › WWP-ENVIRON-MIB

Organization: World Wide Packets, Inc

Last Updated: 2003--0-4-

Category: Power and Environmental Monitoring

Description: Monitors World Wide Packets device environmental sensors including temperature, fan speed, and power supply status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-ENVIRON-MIB?

WWP-ENVIRON-MIB is a World Wide Packets enterprise MIB dedicated to environmental sensor monitoring on WWP's Ethernet/optical transport equipment. It exposes environmental telemetry such as temperature sensor readings, fan speed/operational status, and power supply status for the chassis. It is explicitly used to monitor the hardware status of the device, since these are exactly the sensor readings (temperature, fan health, power supply health) that indicate whether the unit is at risk of overheating or losing redundant power. As a self-contained environmental module within WWP's enterprise MIB family, it typically works alongside the vendor's chassis/system MIBs rather than depending on outside standards. It is deployed in carrier and enterprise transport networks running WWP equipment, where operations staff poll environmental objects to catch a failing fan or power supply before it causes a thermal shutdown. Engineers can download the WWP-ENVIRON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-ENVIRON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

World Wide Packets Ethernet/optical transport equipment

Monitoring Examples

No concrete object names were supplied for this MIB, so a specific object-level scenario cannot be honestly detailed beyond its stated purpose of exposing temperature, fan, and power-supply environment variables. In general use, an admin would expect to poll a temperature object and see it exceed a safe threshold, or a fan-status/power-supply-status object flip to a fault state, indicating the chassis needs physical attention before overheating or losing redundant power.

What Can Be Monitored

temperature sensor readings
fan speed/status
power supply status

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

From WWP-SMI

wwpModules

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwpEnvironMIB	1.3.6.1.4.1.6141.2.13			The MIB module for the WWP Specifc environment. It contains the environment variables for the WWP System.
wwpEnvironMIBObjects	1.3.6.1.4.1.6141.2.13.1
wwpEnviron	1.3.6.1.4.1.6141.2.13.1.1
wwpEnvBatteryModule	1.3.6.1.4.1.6141.2.13.1.1.1
INT wwpEnvBattStatus	1.3.6.1.4.1.6141.2.13.1.1.1.1	INTEGER	read-only	Describes the battery hardware the device is configured with. For Portals, the Management station should use the new added object wwpEnvPortalCurrentBattStatus for the batery status.
wwpEnvPowerSupplyModule	1.3.6.1.4.1.6141.2.13.1.1.2
wwpEnvPowerTable	1.3.6.1.4.1.6141.2.13.1.1.2.1		not-accessible	A list of power supply entries.
wwpEnvPowerEntry	1.3.6.1.4.1.6141.2.13.1.1.2.1.1		not-accessible	An entry in the powerTable providing objects for a power supply.
I32 wwpEnvPowerSupplyNum	1.3.6.1.4.1.6141.2.13.1.1.2.1.1.1	Integer32	read-only	Denotes the power supply.
INT wwpEnvPowerSupplyState	1.3.6.1.4.1.6141.2.13.1.1.2.1.1.2	INTEGER	read-only	Denotes the power supply's state.
INT wwpEnvPowerSupplyType	1.3.6.1.4.1.6141.2.13.1.1.2.1.1.3	INTEGER	read-only	Denotes the power supply type.
INT wwpEnvPowerSupplyRedundancy	1.3.6.1.4.1.6141.2.13.1.1.2.1.1.4	INTEGER	read-only	Denotes whether or not the power supply is redundant.
T/F wwpEnvRedPowerSupplyNotifEnabled	1.3.6.1.4.1.6141.2.13.1.1.2.2	TruthValue	read-write	This variable indicates whether the system generates the wwpEnvRedPowerSupplyNotification. A false value prevents this notifications from being generated by this system.
wwpEnvFanModule	1.3.6.1.4.1.6141.2.13.1.1.3
wwpEnvFanModuleTable	1.3.6.1.4.1.6141.2.13.1.1.3.1		not-accessible	A list of fan module entries.
wwpEnvFanModuleEntry	1.3.6.1.4.1.6141.2.13.1.1.3.1.1		not-accessible	An entry in the fan module Table providing objects for a fan module.
I32 wwpEnvFanModuleNum	1.3.6.1.4.1.6141.2.13.1.1.3.1.1.1	Integer32	read-only	Denotes the Fan module.
INT wwpEnvFanModuleState	1.3.6.1.4.1.6141.2.13.1.1.3.1.1.2	INTEGER	read-only	Denotes the fan modules state.
I32 wwpEnvFanAvgSpeed	1.3.6.1.4.1.6141.2.13.1.1.3.1.1.3	Integer32	read-only	The fans average speed in RPM. The average is calculated on a continuous basis from system startup.
I32 wwpEnvFanCurrentSpeed	1.3.6.1.4.1.6141.2.13.1.1.3.1.1.4	Integer32	read-only	The current speed of the fan in RPM.
I32 wwpEnvFanMinSpeed	1.3.6.1.4.1.6141.2.13.1.1.3.1.1.5	Integer32	read-only	The minimum speed of the fan in RPM.
T/F wwpEnvFanModuleNotifEnabled	1.3.6.1.4.1.6141.2.13.1.1.3.2	TruthValue	read-write	This variable indicates whether the system generates the wwpEnvFanModuleNotification. A false value prevents this notifications from being generated by this system.
wwpEnvTempSensor	1.3.6.1.4.1.6141.2.13.1.1.4
wwpEnvTempSensorTable	1.3.6.1.4.1.6141.2.13.1.1.4.1		not-accessible	A list of Temp Sensors entries.
wwpEnvTempSensorEntry	1.3.6.1.4.1.6141.2.13.1.1.4.1.1		not-accessible	An entry in the Temp Sensor Table providing objects for a Temp Sensor.
I32 wwpEnvTempSensorNum	1.3.6.1.4.1.6141.2.13.1.1.4.1.1.1	Integer32	read-only	Denotes the Temp sensor module.
I32 wwpEnvTempSensorValue	1.3.6.1.4.1.6141.2.13.1.1.4.1.1.2	Integer32	read-only	The value of temperature measured by the sensor inside the device in degrees C.
I32 wwpEnvTempSensorHighThreshold	1.3.6.1.4.1.6141.2.13.1.1.4.1.1.3	Integer32	read-write	The highest value that the object wwpEnvTempSensorValue may obtain at which a wwpEnvMIBTempNotification is sent.
I32 wwpEnvTempSensorLowThreshold	1.3.6.1.4.1.6141.2.13.1.1.4.1.1.4	Integer32	read-write	The Lowest value that the object wwpEnvTempSensorValue may obtain at which a wwpEnvMIBTempNotification is sent.
INT wwpEnvTempSensorState	1.3.6.1.4.1.6141.2.13.1.1.4.1.1.5	INTEGER	read-only	The state indicates whether the current temp is greater than, equal to or less than the threshold state.
T/F wwpEnvTempNotifEnabled	1.3.6.1.4.1.6141.2.13.1.1.4.2	TruthValue	read-write	This variable indicates whether the system generates the wwpEnvTempNotification. A false value prevents this notifications from being generated by this system.
wwpEnvPortPowerMgmt	1.3.6.1.4.1.6141.2.13.1.1.5
wwpPortPowerMgmtTable	1.3.6.1.4.1.6141.2.13.1.1.5.1		not-accessible	A list of Port Power Management entries. This table affects the port power only when the input power supply is Battery.
wwpPortPowerMgmtEntry	1.3.6.1.4.1.6141.2.13.1.1.5.1.1		not-accessible	An entry in the Port Power Mgmt Table providing objects for Port Power Management.
I32 wwpEnvPortBankId	1.3.6.1.4.1.6141.2.13.1.1.5.1.1.1	Integer32	read-only	Denotes the Port Bank module. A Bank is a set of ports for the power management when the source of the input power is switched to battery.
POR wwpEnvPortMap	1.3.6.1.4.1.6141.2.13.1.1.5.1.1.2	PortList	read-only	The port map associated with this BankId.
INT wwpEnvPortBankOn	1.3.6.1.4.1.6141.2.13.1.1.5.1.1.3	INTEGER	read-write	The object to decide whether the port related to this Bank should be on or not if the input power supply is switched to Battery.
wwpEnvNotif	1.3.6.1.4.1.6141.2.13.1.1.6
INT wwpPowerSwitchingOp	1.3.6.1.4.1.6141.2.13.1.1.6.1	INTEGER	read-only	The object to notify whether the input power supply is switching from ac to Battery or vice versa.
wwpEnvPortalBatteryModule	1.3.6.1.4.1.6141.2.13.1.1.7
INT wwpEnvPortalBatteryStatus	1.3.6.1.4.1.6141.2.13.1.1.7.1	INTEGER	read-only	Describes the current status of the battery. If battery is connected then the status is indicated as 'present'.
INT wwpEnvPortalBatteryVoltageLevel	1.3.6.1.4.1.6141.2.13.1.1.7.2	INTEGER	read-only	Describes the current voltage level of the battery.
INT wwpEnvPortalBatteryCondition	1.3.6.1.4.1.6141.2.13.1.1.7.3	INTEGER	read-only	Describes the current condition of the battery.
INT wwpEnvPortalPowerSource	1.3.6.1.4.1.6141.2.13.1.1.7.4	INTEGER	read-only	Describes the current power source for the device.
STR wwpEnvBatteryNormalStateName	1.3.6.1.4.1.6141.2.13.1.1.7.5	DisplayString	read-write	The state name associated with the low state of the battery.
STR wwpEnvBatteryLowStateName	1.3.6.1.4.1.6141.2.13.1.1.7.6	DisplayString	read-write	The state name associated with the normal state of the battery.
STR wwpEnvBatteryGoodStateName	1.3.6.1.4.1.6141.2.13.1.1.7.7	DisplayString	read-write	The state name associated with the good state of the battery.
STR wwpEnvBatteryBadStateName	1.3.6.1.4.1.6141.2.13.1.1.7.8	DisplayString	read-write	The state name associated with the bad state of the battery.
STR wwpEnvBatteryPresentStateName	1.3.6.1.4.1.6141.2.13.1.1.7.9	DisplayString	read-write	The state name associated with the battery state 'present'.
STR wwpEnvBatteryMissingStateName	1.3.6.1.4.1.6141.2.13.1.1.7.10	DisplayString	read-write	The state name associated with the battery state 'missing'.
STR wwpEnvBatteryPowerPrimaryStateName	1.3.6.1.4.1.6141.2.13.1.1.7.11	DisplayString	read-write	The state name associated with the state when the device is on primary power.
STR wwpEnvBatteryPowerBatteryStateName	1.3.6.1.4.1.6141.2.13.1.1.7.12	DisplayString	read-write	The state name associated with the state when the device is on battery power.
T/F wwpEnvBatteryLowStateNotifEnabled	1.3.6.1.4.1.6141.2.13.1.1.7.13	TruthValue	read-write	This variable indicates whether the system will generate the wwpEnvPortalBatteryStatusNotification in case of battery state changing from normal to low or vice versa. A false value prevents this notifications from being generated by this system.
T/F wwpEnvBatteryBadStateNotifEnabled	1.3.6.1.4.1.6141.2.13.1.1.7.14	TruthValue	read-write	This variable indicates whether the system will generate the wwpEnvPortalBatteryStatusNotification in case of battery state changing from good to bad or vice versa. A false value prevents this notifications from being generated by this system.
T/F wwpEnvBatteryMissingStateNotifEnabled	1.3.6.1.4.1.6141.2.13.1.1.7.15	TruthValue	read-write	This variable indicates whether the system will generate the wwpEnvPortalBatteryStatusNotification in case of battery state changing from present to missing or vice versa. A false value prevents this notifications from being generated by this system.
T/F wwpEnvBatteryPowerNotifEnabled	1.3.6.1.4.1.6141.2.13.1.1.7.16	TruthValue	read-write	This variable indicates whether the system will generate the wwpEnvPortalBatteryStatusNotification in case of input power changing from primary to battery or vice versa. A false value prevents this notifications from being generated by this system.
INT wwpEnvBatteryPeriodicTrapsTimer	1.3.6.1.4.1.6141.2.13.1.1.7.17	INTEGER	read-write	Adjusts the amount of time, in hours, when the current state of the battery is evaluated and status traps are automatically issued. When set to zero (0) no periodic evaluation of the battery is performed.
T/F wwpEnvBatteryPowerUpTrapsEnable	1.3.6.1.4.1.6141.2.13.1.1.7.18	TruthValue	read-write	When set to true, upon portal power-up the state of the battery is evaluated and status traps are issued. When set to false, no portal power-up battery state traps will be issued.
wwpEnvDoorModule	1.3.6.1.4.1.6141.2.13.1.1.8
INT wwpEnvDoorState	1.3.6.1.4.1.6141.2.13.1.1.8.1	INTEGER	read-only	The state of the door.
T/F wwpEnvDoorNotifEnabled	1.3.6.1.4.1.6141.2.13.1.1.8.2	TruthValue	read-write	This variable indicates whether the system generates the wwpEnvDoorStateChgNotification. A false value prevents this notifications from being generated by this system.
wwpEnvDryContactModule	1.3.6.1.4.1.6141.2.13.1.1.9
STR wwpEnvDryContactOpenStateName	1.3.6.1.4.1.6141.2.13.1.1.9.1	DisplayString	read-write	The state name associated with the open state of the dry contact.
INT wwpEnvDryContactOpenStateChgAccumulate	1.3.6.1.4.1.6141.2.13.1.1.9.2	INTEGER	read-write	Setting this object to 'enable' will cause the system to accumulate open state changes.
C32 wwpEnvDryContactOpenStateCount	1.3.6.1.4.1.6141.2.13.1.1.9.3	Counter32	read-only	The number of times the dry contact has entered the open state.
T/F wwpEnvDryContactOpenStateNotifEnabled	1.3.6.1.4.1.6141.2.13.1.1.9.4	TruthValue	read-write	This variable indicates whether the system generates the wwpEnvDryContactOpenStateNotification. A false value prevents this notifications from being generated by this system.
STR wwpEnvDryContactCloseStateName	1.3.6.1.4.1.6141.2.13.1.1.9.5	DisplayString	read-write	The state name associated with the close state of the dry contact.
INT wwpEnvDryContactCloseStateChgAccumulate	1.3.6.1.4.1.6141.2.13.1.1.9.6	INTEGER	read-write	Setting this object to 'enable' will cause the system to accumulate close state changes.
C32 wwpEnvDryContactCloseStateCount	1.3.6.1.4.1.6141.2.13.1.1.9.7	Counter32	read-only	The number of times the dry contact has entered the close state.
T/F wwpEnvDryContactCloseStateNotifEnabled	1.3.6.1.4.1.6141.2.13.1.1.9.8	TruthValue	read-write	This variable indicates whether the system generates the wwpEnvDryContactCloseStateNotification. A false value prevents this notifications from being generated by this system.
wwpEnvRFModule	1.3.6.1.4.1.6141.2.13.1.1.10
INT wwpEnvRFModuleState	1.3.6.1.4.1.6141.2.13.1.1.10.1	INTEGER	read-write	Setting this object to 'enable' will set the the RF state to 'enable'.
T/F wwpEnvRFModuleSignalDetect	1.3.6.1.4.1.6141.2.13.1.1.10.2	TruthValue	read-only	The status of signal detect by the RF Module.
wwpEnvironMIBNotificationPrefix	1.3.6.1.4.1.6141.2.13.2
wwpEnvironMIBNotifications	1.3.6.1.4.1.6141.2.13.2.0
NTF wwpEnvPowerSupplyStatusNotification	1.3.6.1.4.1.6141.2.13.2.0.1			A wwpEnvPowerSupplyStatusNotification is sent if a power supply state is changed.
NTF wwpEnvFanModuleNotification	1.3.6.1.4.1.6141.2.13.2.0.2			A wwpEnvFanModuleNotification is sent if the fan state changes.
NTF wwpEnvTempNotification	1.3.6.1.4.1.6141.2.13.2.0.3			A wwpEnvTempNotification is sent if the wwpEnvTempSensorState is changed.
NTF wwpEnvPowerSwitchNotification	1.3.6.1.4.1.6141.2.13.2.0.4			A wwpEnvPowerSwitchNotification is sent if the input power supply is switched to Battery from the AC power or switched from the Battery to the AC Power.
NTF wwpEnvPortalBatteryStatusNotification	1.3.6.1.4.1.6141.2.13.2.0.5			A wwpEnvPortalBatteryStatusNotification is sent if the Battery status changes. If the device supports the configurable battery state names, then the corresponding battery state name should also be sent with this notification.
NTF wwpEnvPortalBatteryVoltageLevelNotification	1.3.6.1.4.1.6141.2.13.2.0.6			A wwpEnvPortalBatteryVoltageLevelNotification is sent if the Battery voltage level changes from normal to low or vice versa. If the device supports the configurable battery state names, then the corresponding battery state name should also be sent with this notification.
NTF wwpEnvPortalBatteryConditionNotification	1.3.6.1.4.1.6141.2.13.2.0.7			A wwpEnvPortalBatteryConditionNotification is sent if the Battery condition changes from good to bad or vice versa. If the device supports the configurable battery state names, then the corresponding battery state name should also be sent with this notification.
NTF wwpEnvPortalPowerSourceNotification	1.3.6.1.4.1.6141.2.13.2.0.8			A wwpEnvPortalPowerSourceNotification is sent if the Battery input power source changes from battery to primary power or vice versa. A device which supports wwpEnvPowerSwitchNotification should not support this notification. If the device supports the configurable battery state names, then the corresponding battery state name should also be sent with this notification.
NTF wwpEnvDoorStateChgNotification	1.3.6.1.4.1.6141.2.13.2.0.9			A wwpEnvDoorStateChgNotification is sent if the door state changes.
NTF wwpEnvDryContactOpenStateNotification	1.3.6.1.4.1.6141.2.13.2.0.10			A wwpEnvDryContactOpenStateNotification is sent when the dry contact enters in the open state.
NTF wwpEnvDryContactCloseStateNotification	1.3.6.1.4.1.6141.2.13.2.0.11			A wwpEnvDryContactCloseStateNotification is sent when the dry contact enters in the close state.
wwpEnvironMIBConformance	1.3.6.1.4.1.6141.2.13.3
wwpEnvironMIBCompliances	1.3.6.1.4.1.6141.2.13.3.1
wwpEnvironMIBGroups	1.3.6.1.4.1.6141.2.13.3.2

RFC description

Vendor-private MIB for environmental monitoring (temperature, power, fans) on WWP (World Wide Packets) networking equipment.

Start monitoring World Wide Packets Ethernet/optical transport equipment (temperature/fan/power-supply status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-ENVIRON-MIB

What Is WWP-ENVIRON-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description