WWP-ESM-MIB

All MIBs › WWP-ESM-MIB

Organization: World Wide Packets, Inc

Last Updated: 2011-06-01

Category: World Wide Packets Metro Ethernet

Description: Manages World Wide Packets Ethernet Switch Module port configuration, VLAN membership, and switching statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-ESM-MIB?

WWP-ESM-MIB is a World Wide Packets (Ciena LEOS) proprietary MIB for the vendor's Ethernet Switch Module (ESM), covering port configuration, VLAN membership, and switching/traffic statistics, along with SNMPv3 trap forwarding configuration (e.g., v3TrapForwardingTable). It exposes both configuration data (port and VLAN settings) and operational/performance data (switching statistics counters), giving visibility into how traffic is being forwarded through the module. Its monitoring role includes tracking port-level traffic counters to detect congestion or errors, and confirming that SNMPv3 trap/notification forwarding destinations are correctly configured so that fault events actually reach a management station. It relies on standard SNMPv3 notification mechanisms (SNMP-TARGET-MIB/SNMP-NOTIFICATION-MIB conventions) for its trap forwarding table, alongside the vendor's own port/VLAN model. It is deployed on World Wide Packets/Ciena LEOS Metro Ethernet access platforms that use pluggable Ethernet switch modules, managed through the WWP-ESM-MIB MIB.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-ESM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

World Wide Packets / Ciena LEOS Ethernet Switch Module (ESM)

Monitoring Examples

The v3TrapForwardingTable is a concrete sample object, used to configure which SNMPv3 targets receive forwarded traps/informs from the ESM; an admin would poll or audit this table to verify a management station is correctly registered to receive alerts, and a missing or misconfigured entry would explain why fault notifications from the module are not being received. Alongside this, port switching statistics counters on the ESM would be polled to detect abnormal error or discard rates on a given port.

What Can Be Monitored

SNMPv3 trap forwarding targets (v3TrapForwardingTable)
port VLAN membership
port switching statistics
port configuration state

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC1213-MIB

sysUpTime

From SNMP-COMMUNITY-MIB

snmpTrapAddress

OBJECT-TYPE

From SNMPv2-MIB

snmpTrapOID

OBJECT-TYPE

From SNMPv2-SMI

Gauge32
Integer32
IpAddress
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TruthValue

From WWP-SMI

wwpModules

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwpModulesEsm	1.3.6.1.4.1.6141.2.62			WWP ESM MIB
wwpESM	1.3.6.1.4.1.6141.2.62.1
wwpESMSystem	1.3.6.1.4.1.6141.2.62.1.1
STR wwpESMVersion	1.3.6.1.4.1.6141.2.62.1.1.1	DisplayString	read-only	The version number of the WWP ESM System.
STR wwpESMHost	1.3.6.1.4.1.6141.2.62.1.1.2	DisplayString	read-only	The hostname of the system in which the WWP ESM system is executed on.
IP wwpESMIpAddress	1.3.6.1.4.1.6141.2.62.1.1.3	IpAddress	read-only	The ipaddress of the system in which the WWP ESM system is executed on.
I32 wwpESMTotalMemory	1.3.6.1.4.1.6141.2.62.1.1.4	Integer32	read-only	The Total memory of the device in which the WWP ESM is running
I32 wwpESMFreeMemory	1.3.6.1.4.1.6141.2.62.1.1.5	Integer32	read-only	The Free memory available in the device in which the WWP ESM is running
DAT wwpESMStartTime	1.3.6.1.4.1.6141.2.62.1.1.6	DateAndTime	read-only	This variable states the time at which the ESM Server started
TIK wwpESMUpTime	1.3.6.1.4.1.6141.2.62.1.1.7	TimeTicks	read-only	This variable states the duration for which the ESM Server has been running
STR wwpESMShutdown	1.3.6.1.4.1.6141.2.62.1.1.8	DisplayString	read-write	This variable is used to shutdown the ESM from the manager. The user needs to give the login name and the password.Once,the user gives the loginname and the password,the ESM Server shuts down. SYNTAX: loginName,password
wwpESMPorts	1.3.6.1.4.1.6141.2.62.1.1.9
I32 httpPort	1.3.6.1.4.1.6141.2.62.1.1.9.1	Integer32	read-only	This describes the http port.This port can be used to open an html client connection to the WWP ESM Server
I32 esmSocketPort	1.3.6.1.4.1.6141.2.62.1.1.9.2	Integer32	read-only	This describes the ESM-Socket port
I32 rmiRegistryPort	1.3.6.1.4.1.6141.2.62.1.1.9.3	Integer32	read-only	This describes the RMI-Registry port.This port can be used to open a RMI client connection to the WWP ESM Server
trapPortTable	1.3.6.1.4.1.6141.2.62.1.1.9.4		not-accessible	This table describes the ports at which the traps are being received by the WWP ESM
trapPortEntry	1.3.6.1.4.1.6141.2.62.1.1.9.4.1		not-accessible	It describes an entry in the trap-port table
I32 seqNum	1.3.6.1.4.1.6141.2.62.1.1.9.4.1.1	Integer32	read-only	An incremental integer number
I32 port	1.3.6.1.4.1.6141.2.62.1.1.9.4.1.2	Integer32	read-only	This describes the port number
wwpESMSchedulerTable	1.3.6.1.4.1.6141.2.62.1.1.10		not-accessible	A table of WwpESM scheduler instances
wwpESMschedulerEntry	1.3.6.1.4.1.6141.2.62.1.1.10.1		not-accessible	A collection of objects specific to the WWP ESM system Scheduler
I32 wwpESMSchedulerIndex	1.3.6.1.4.1.6141.2.62.1.1.10.1.1	Integer32	read-only	The index for the WWP ESM Scheduler instance
STR wwpESMSchedulerDesc	1.3.6.1.4.1.6141.2.62.1.1.10.1.2	DisplayString	read-only	A description of the WWP ESM Scheduler instance
I32 wwpESMSchedulerNumTasks	1.3.6.1.4.1.6141.2.62.1.1.10.1.3	Integer32	read-only	The number of tasks scheduled in this WWP ESM Scheduler instance
I32 wwpESMSchedulerNumThreads	1.3.6.1.4.1.6141.2.62.1.1.10.1.4	Integer32	read-only	Total number of Worker threads available
I32 wwpESMSchedulerActiveThreads	1.3.6.1.4.1.6141.2.62.1.1.10.1.5	Integer32	read-only	The number of active Worker threads
I32 wwpESMSchedulerIdleThreads	1.3.6.1.4.1.6141.2.62.1.1.10.1.6	Integer32	read-only	The number of idle Worker threads
wwpESMTopoMib	1.3.6.1.4.1.6141.2.62.1.2
I32 wwpESMNumObjects	1.3.6.1.4.1.6141.2.62.1.2.1	Integer32	read-only	The number of objects being managed by the WWP ESM system.
I32 wwpESMNumNetworks	1.3.6.1.4.1.6141.2.62.1.2.2	Integer32	read-only	The number of networks being managed by the WWP ESM system.
I32 wwpESMNumNodes	1.3.6.1.4.1.6141.2.62.1.2.3	Integer32	read-only	The number of nodes being managed by the WWP ESM system.
I32 wwpESMNumInterfaces	1.3.6.1.4.1.6141.2.62.1.2.4	Integer32	read-only	The number of interfaces being managed by the WWP ESM system.
STR moUserPropNames	1.3.6.1.4.1.6141.2.62.1.2.5	DisplayString	read-write	This variable indicates to the agent what all user property values the user would like to see in the moUserProp variable of the MoTable. This also provides for the facility of viewing all the user property-values by specifying the word 'all' . If the user needs to see only a few specific user property values ,then he needs to specify them explicitly SYNTAX1 all SYNTAX2 userPropName1,userPropName2,... The values for the properties will be in the following format: userPropName1=value1,userPopName2=value2..
moTable	1.3.6.1.4.1.6141.2.62.1.2.6		not-accessible	This describes the details of Managed Objects
moEntry	1.3.6.1.4.1.6141.2.62.1.2.6.1		not-accessible	An entry of the Mo Table
STR moNameIndex	1.3.6.1.4.1.6141.2.62.1.2.6.1.1	DisplayString	read-only	This variable represents the name of the Network Element. This name should uniquely represent the MO in the network domain across all MO types.This entry corresponds to the Name field of the ManagedObject table in the database
STR moType	1.3.6.1.4.1.6141.2.62.1.2.6.1.3	DisplayString	read-only	This variable represents the type of the Network Element whose attributes are presented in this specific row of the MO table.This entry corresponds to the Type field of the ManagedObject table in the database
I32 moFailureCount	1.3.6.1.4.1.6141.2.62.1.2.6.1.4	Integer32	read-only	This variable represents the number of failures occuring in the network element. This entry corresponds to the FailureCount field of the ManagedObject table in the database
I32 moFailureThreshold	1.3.6.1.4.1.6141.2.62.1.2.6.1.5	Integer32	read-only	This variable represents the minimum value for failures which acts as the threshold.This entry corresponds to the FailureThreshold field of the ManagedObject table in the database
T/F moManaged	1.3.6.1.4.1.6141.2.62.1.2.6.1.6	TruthValue	read-only	This variable states whether the mo is managed or not.This entry corresponds to the Managed field of the ManagedObject table in the database
I32 moStatus	1.3.6.1.4.1.6141.2.62.1.2.6.1.7	Integer32	read-only	This value gives the current status of the MO.This entry corresponds to the Status field of the ManagedObject table in the database
G32 moStatusChangeTime	1.3.6.1.4.1.6141.2.62.1.2.6.1.8	Gauge32	read-only	This variable represents the time at which the status of the mo was formally acknowledged to have changed.This entry corresponds to the StatusChangeTime field of the ManagedObject table in the database
G32 moStatusUpdateTime	1.3.6.1.4.1.6141.2.62.1.2.6.1.9	Gauge32	read-only	This variable represents the time at which the status of the mo was formally acknowledged to have been updated.This entry corresponds to the StatusUpdateTime field of the ManagedObject table in the database
TIK moPollInterval	1.3.6.1.4.1.6141.2.62.1.2.6.1.10	TimeTicks	read-only	This variable states the polling interval of the mo.This entry corresponds to the PollInterval field of the ManagedObject table in the database
STR moUserProperties	1.3.6.1.4.1.6141.2.62.1.2.6.1.11	DisplayString	read-only	The values for the user properties which the user specifies in the moUserPropNames variable are displayed The values will be displayed in the folloing formate propName1=value1,porpName2=vaule2,....
STR moDerivedProperties	1.3.6.1.4.1.6141.2.62.1.2.6.1.12	DisplayString	read-only	This variable displays the values of the user defined objects ' properties which the user specifies in the derivedPropNames variable in the moDerivedPropNamesTable. The values will be displayed in the following formate propName1=value1,propName2=value2,....
OID inheritingOid1	1.3.6.1.4.1.6141.2.62.1.2.6.1.13	OBJECT IDENTIFIER	read-only	This variable states the oid of the table. For example,if the discovered object is derived from TopoObject, then, the oid of the TopoObjectTable in this MIB will be filled here.If the oid is .0.0 then it implies that there is no further inheritance.
STR inheritingTableName1	1.3.6.1.4.1.6141.2.62.1.2.6.1.14	DisplayString	read-only	This variable states the name of the table. For example,if the discovered object is derived from TopoObject, then, the table name TopoObjectTable will be filled here.If the tablename is empty then it implies that there is no further inheritance.
topoObjTable	1.3.6.1.4.1.6141.2.62.1.2.7		not-accessible	This table contains the various topo Objects
topoObjEntry	1.3.6.1.4.1.6141.2.62.1.2.7.1		not-accessible	An entry of the topoObject Table
IP ipAddress	1.3.6.1.4.1.6141.2.62.1.2.7.1.1	IpAddress	read-only	This variable states the ipAddress of the Object.This entry corresponds to the IpAddress field of the TopoObject table in the database
IP netMask	1.3.6.1.4.1.6141.2.62.1.2.7.1.2	IpAddress	read-only	This variable states the net mask of the object.This entry corresponds to the NetMask field of the TopoObject table in the database
STR moCommunity	1.3.6.1.4.1.6141.2.62.1.2.7.1.3	DisplayString	read-only	This variable states the read community String used by the Snmp Agent in the Network Element. This field is valid only if the Network Element is also an SnmpNode.This entry corresponds to the Community field of the TopoObject table in the database
STR moWriteCommunity	1.3.6.1.4.1.6141.2.62.1.2.7.1.4	DisplayString	read-only	This variable states the write community String used by the Snmp Agent in the Network Element. This field is valid only if the Network Element is also an SnmpNode.This entry corresponds to the WriteCommunity field of the TopoObject table in the database
STR isDHCP	1.3.6.1.4.1.6141.2.62.1.2.7.1.6	DisplayString	read-only	This variable states whether the network element supports DHCP (i.e is the ipaddress for the network element assigned by DHCP protocol). This entry corresponds to the IsDHCP field of the TopoObject table in the database
STR baseMibs	1.3.6.1.4.1.6141.2.62.1.2.7.1.7	DisplayString	read-only	This variable states the Mibs implemented by the Snmp Agent in the Network Element. This field is valid only if the Network Element is also an Snmp Node.This entry corresponds to the BaseMibs field of the TopoObject table in the database
STR version	1.3.6.1.4.1.6141.2.62.1.2.7.1.8	DisplayString	read-only	This variable states the version used by the Snmp Agent in the Network Element. This entry corresponds to the Version field of the TopoObject table in the database.
STR userName	1.3.6.1.4.1.6141.2.62.1.2.7.1.9	DisplayString	read-only	This variable states the userName used by the SNMPv3 Agent in the Network Element. This entry corresponds to the UserName field of the TopoObject table in the database.
STR contextName	1.3.6.1.4.1.6141.2.62.1.2.7.1.10	DisplayString	read-only	This variable states the contextName used by the SNMPv3 Agent in the Network Element. This entry corresponds to the ContextName field of the TopoObject table in the database.
OID inheritingOid2	1.3.6.1.4.1.6141.2.62.1.2.7.1.11	OBJECT IDENTIFIER	read-only	This variable states the oid of the table. For example,if the discovered object's type is either Node or any of its child, then, the oid of the NodeTable in this MIB will be filled here.If the oid is .0.0 then it implies that there is no further inheritance.
STR inheritingTableName2	1.3.6.1.4.1.6141.2.62.1.2.7.1.12	DisplayString	read-only	This variable states the name of the table. For example,if the discovered object's type is either Node or any of its child, then, the table name NodeTable will be filled here.If the table name is empty then it implies that there is no further inheritance.
networkTable	1.3.6.1.4.1.6141.2.62.1.2.8		not-accessible	This table contains information about the various networks supported by the ESM
networkEntry	1.3.6.1.4.1.6141.2.62.1.2.8.1		not-accessible	An entry of the Network table
STR discover	1.3.6.1.4.1.6141.2.62.1.2.8.1.1	DisplayString	read-only	This variable states whether disocvery is being done on this network or not. This entry corresponds to the Discover field of the Network table in the database
I32 discoverStatus	1.3.6.1.4.1.6141.2.62.1.2.8.1.2	Integer32	read-only	This variable states the discovery status for the network. This entry corresponds to the DiscoveryStatus field of the Network table in the database
OID inheritingOid3	1.3.6.1.4.1.6141.2.62.1.2.8.1.3	OBJECT IDENTIFIER	read-only	This variable states the oid of the table. For example,if the discovered object is any direct child( e.g. MyNetworkChild) of Network (or any child of MyNetworkChild),then, the oid of the direct child's table (e.g. MyNetworkChildTable) in this MIB will be filled here, If the oid is .0.0 then it implies that there is no further inheritance.
STR inheritingTableName3	1.3.6.1.4.1.6141.2.62.1.2.8.1.4	DisplayString	read-only	This variable states the name of the table. For example,if the discovered object is any direct child( e.g. MyNetworkChild) of Network (or any child of MyNetworkChild),then, the tablename of the direct child's table (e.g. MyNetworkChildTable) in this MIB will be filled here, If the table name is empty then it implies that there is no further inheritance.
nodeTable	1.3.6.1.4.1.6141.2.62.1.2.9		not-accessible	This table describes the nodes in the ESM
nodeEntry	1.3.6.1.4.1.6141.2.62.1.2.9.1		not-accessible	An entry of the Node table
STR isRouter	1.3.6.1.4.1.6141.2.62.1.2.9.1.1	DisplayString	read-only	This variable states whether the node is a router or not. This entry corresponds to the isRouter field of the Node table in the database
OID inheritingOid4	1.3.6.1.4.1.6141.2.62.1.2.9.1.2	OBJECT IDENTIFIER	read-only	This variable states the oid of the table. For example,if the discovered object's type is either SnmpNode or any of its child, then, the oid of the SnmpNodeTable in this MIB will be filled here. If the oid is .0.0 then it implies that there is no further inheritance.
STR inheritingTableName4	1.3.6.1.4.1.6141.2.62.1.2.9.1.3	DisplayString	read-only	This variable states the name of the table. For example,if the discovered object's type is either SnmpNode or any of its child, then, the tabel name SnmpNodeTable will be filled here. If the table name is empty then it implies that there is no further inheritance.
ipAddressTable	1.3.6.1.4.1.6141.2.62.1.2.10		not-accessible	This table describes the ipAddress objects
ipAddressEntry	1.3.6.1.4.1.6141.2.62.1.2.10.1		not-accessible	An entry of the ipAddress table
STR parentNode	1.3.6.1.4.1.6141.2.62.1.2.10.1.1	DisplayString	read-only	This variable states the parent Node of this Interface.This entry corresponds to the ParentNode field of the IpAddress table in the database.
IP parentNet	1.3.6.1.4.1.6141.2.62.1.2.10.1.2	IpAddress	read-only	This variable states the name of the parent network to which this Interface belongs. This entry corresponds to the ParentNode field of the IpAddress table in the database.
OID inheritingOid5	1.3.6.1.4.1.6141.2.62.1.2.10.1.3	OBJECT IDENTIFIER	read-only	This variable states the oid of the table. For example,if the discovered object's type is either SnmpInterface or any of its child.Then,the oid of the SnmpInterfaceTable in this MIB will be filled here. If the oid is .0.0 then it implies that there is no further inheritance.
STR inheritingTableName5	1.3.6.1.4.1.6141.2.62.1.2.10.1.4	DisplayString	read-only	This variable states the name of the table. For example,if the discovered object's type is either SnmpInterface or any of its child.Then,the tabelname SnmpInterfaceTable will be filled here. If the table name is empty then it implies that there is no further inheritance.
snmpNodeTable	1.3.6.1.4.1.6141.2.62.1.2.11		not-accessible	This table describes the SNMP nodes in the WWP ESM
snmpNodeEntry	1.3.6.1.4.1.6141.2.62.1.2.11.1		not-accessible	An entry of the snmpNode table
STR sysDesc	1.3.6.1.4.1.6141.2.62.1.2.11.1.2	DisplayString	read-only	This variable states the System Descriptor of this node as reported by the snmp agent. This entry corresponds to the SysDescr field of the SnmpNode table in the database
STR sysName	1.3.6.1.4.1.6141.2.62.1.2.11.1.3	DisplayString	read-only	This variable states the System Name of this node as reported by the snmp agent. This entry corresponds to the SysName field of the SnmpNode table in the database
OID sysOID	1.3.6.1.4.1.6141.2.62.1.2.11.1.4	OBJECT IDENTIFIER	read-only	This variable states the System Object Identifier of this node as reported by the snmp agent. This entry corresponds to the SysOid field of the SnmpNode table in the database
OID inheritingOid6	1.3.6.1.4.1.6141.2.62.1.2.11.1.5	OBJECT IDENTIFIER	read-only	This variable states the oid of the table. For example,if the discovered object is any direct child ( e.g. MySnmpNodeChild) of SnmpNode (or any child of MySnmpNodeChild),then, the oid of the direct child's table(e.g. MySnmpNodeChildTable) in this MIB will be filled here. If the oid is .0.0 then it implies that there is no further inheritance.
STR inheritingTableName6	1.3.6.1.4.1.6141.2.62.1.2.11.1.6	DisplayString	read-only	This variable states the name of the table. For example,if the discovered object is any direct child ( e.g. MySnmpNodeChild) of SnmpNode (or any child of MySnmpNodeChild),then, the table name of the direct child's table(e.g. MySnmpNodeChildTable) in this MIB will be filled here. If the table name is empty then it implies that there is no further inheritance.
snmpInterfaceTable	1.3.6.1.4.1.6141.2.62.1.2.12		not-accessible	This table describes the properties of the snmp interfaces attached to a Snmp node disocvered by the WWP ESM system.
snmpInterfaceEntry	1.3.6.1.4.1.6141.2.62.1.2.12.1		not-accessible	An entry of the snmpInterfaceTable
IP hostNetMask	1.3.6.1.4.1.6141.2.62.1.2.12.1.1	IpAddress	read-only	This variable states the netmask of this interface reported by the snmp agent in the node to which this interface object is attahced. This entry corresponds to the HostNetMask field of the SnmpInterface table in the database
I32 ifIndex	1.3.6.1.4.1.6141.2.62.1.2.12.1.2	Integer32	read-only	This variable states the interface index reported by the snmp agent in the node to which this interface object is attached. This entry corresponds to the IfIndex field of the SnmpInterface table in the database
STR physMedia	1.3.6.1.4.1.6141.2.62.1.2.12.1.3	DisplayString	read-only	This variable states the physical media of this inetrface as reported by the snmp agent. This entry corresponds to the PhysMedia field of the SnmpInterface table in the database
STR physAddress	1.3.6.1.4.1.6141.2.62.1.2.12.1.4	DisplayString	read-only	This variable states the Physical address of the interface as reported by the snmp agent. This entry corresponds to the PhysAddr field of the SnmpInterface table in the database
I32 ifSpeed	1.3.6.1.4.1.6141.2.62.1.2.12.1.5	Integer32	read-only	This variable states the speed of this interface as reported by the snmp agent.This entry corresponds to the IfSpeed field of the SnmpInterface table in the database
STR ifDesc	1.3.6.1.4.1.6141.2.62.1.2.12.1.6	DisplayString	read-only	This variable states the descriptor of this inetrface as reported by the snmp agent. This entry corresponds to the IfDescr field of the SnmpInterface table in the database
OID inheritingOid7	1.3.6.1.4.1.6141.2.62.1.2.12.1.8	OBJECT IDENTIFIER	read-only	This variable states the oid of the table. For example,if the discovered object is any direct child( e.g. MySnmpInterfaceChild) of SnmpInterface (or any child of MySnmpInterfaceChild),then, the oid of the direct child's table(e.g. MySnmpInterfaceChildTable) in this MIB will be filled here. If the oid is .0.0 then it implies that there is no further inheritance.
STR inheritingTableName7	1.3.6.1.4.1.6141.2.62.1.2.12.1.9	DisplayString	read-only	This variable states the name of the table. For example,if the discovered object is any direct child( e.g. MySnmpInterfaceChild) of SnmpInterface (or any child of MySnmpInterfaceChild),then, the table name of the direct child's table(e.g. MySnmpInterfaceChildTable) in this MIB will be filled here. If the table name is empty then it implies that there is no further inheritance.
moDerivedPropNameTable	1.3.6.1.4.1.6141.2.62.1.2.13		not-accessible	This table contains the type of the user-defined objects and the properties of the user defined objects. The user can specify what all user-object's properties he wants to be displayed in the moDerivedProperties in MO table.
moDerivedPropNameEntry	1.3.6.1.4.1.6141.2.62.1.2.13.1		not-accessible	An entry of the User Object Table.
I32 indexNum	1.3.6.1.4.1.6141.2.62.1.2.13.1.1	Integer32	read-write	This variable is an incremental integer which uniquely identifies each entry of the table.
STR objClassName	1.3.6.1.4.1.6141.2.62.1.2.13.1.2	DisplayString	read-write	This variable indicates the class name of the user defined objects and identifies them uniquely.The user needs to specify the full package name of the object For example : com.adventnet.nms.topodb.Node
STR derivedPropNames	1.3.6.1.4.1.6141.2.62.1.2.13.1.3	DisplayString	read-write	This variable indicates the names of the derived properties of user defined objects which will be displayed in the moDerivedProperties variable in the MoTable. The user must specify the names of derived properties in the following format .SYNTAX: propName1,propName2,...
OID tableOid	1.3.6.1.4.1.6141.2.62.1.2.13.1.4	OBJECT IDENTIFIER	read-write	This variable states the oid of the table for the particular mo-type
STR tableName	1.3.6.1.4.1.6141.2.62.1.2.13.1.5	DisplayString	read-write	This variable describes the table name
moNotificationMib	1.3.6.1.4.1.6141.2.62.1.2.14
STR moExtraPropNames	1.3.6.1.4.1.6141.2.62.1.2.14.1	DisplayString	read-write	The extra properties which the user wants to be sent with the pre-defined notificaiton varbinds. It should be in the following format. SYNTAX: propName1,propName2,... The values for the properties will be in the following format: propName1=value1,propName2=value2...
moNotiPrefix	1.3.6.1.4.1.6141.2.62.1.2.14.2
moNotifications	1.3.6.1.4.1.6141.2.62.1.2.14.2.0
NTF moEnrolNotification	1.3.6.1.4.1.6141.2.62.1.2.14.2.0.1			The ESMAgent sends a moEnrolNotification to the manager when an MO has been enrolled/added into management domain.
NTF moDeenrolNotification	1.3.6.1.4.1.6141.2.62.1.2.14.2.0.2			The ESMAgent sends a moDeenrolNotification to the manager when an MO has been deenrolled/deleted from the management domain
NTF moAttrChangeNotification	1.3.6.1.4.1.6141.2.62.1.2.14.2.0.3			The ESMAgent sends a moAttrChangeNotification to the manager when any discoverd MO's one or more attributes are changed.
moNotiVarbinds	1.3.6.1.4.1.6141.2.62.1.2.14.3
STR moName	1.3.6.1.4.1.6141.2.62.1.2.14.3.1	DisplayString	read-only	This variable indicates the name of the MO.
STR moOwnerName	1.3.6.1.4.1.6141.2.62.1.2.14.3.2	DisplayString	read-only	This variable represents the Ownername of the Network Element. This name also uniquely represents the MO in the network domain across all MO types.
STR moNodeType	1.3.6.1.4.1.6141.2.62.1.2.14.3.3	DisplayString	read-only	This variable describes the type of the MO ie whether it is node, motwork,interface,etc.
G32 moEnrolTime	1.3.6.1.4.1.6141.2.62.1.2.14.3.4	Gauge32	read-only	This variable represents the time at which the MO was formally enrolled in the management domain
G32 moDeEnrolTime	1.3.6.1.4.1.6141.2.62.1.2.14.3.5	Gauge32	read-only	This variable represents the time at which the MO was formally deenrolled in the management domain
G32 moDataChangeTime	1.3.6.1.4.1.6141.2.62.1.2.14.3.6	Gauge32	read-only	This variable indicates when a particular value's time of change is formally acknowleged by the ESM.
STR moExtraProperties	1.3.6.1.4.1.6141.2.62.1.2.14.3.7	DisplayString	read-only	The values for the user properties which the user specifies in the moExtraPropNames variable are sent as part of the notifications The values will be displayed in the folloing formate propName1=value1,porpName2=vaule2,....
IP moIpAddress	1.3.6.1.4.1.6141.2.62.1.2.14.3.8	IpAddress	read-only	This variable provides the IP address of the device that this topology event relates to.
IPt moIpAddressAddrType	1.3.6.1.4.1.6141.2.62.1.2.14.3.9	InetAddressType	read-only	This variable provides the IP Address type of the device that this topology event relates to
IP moIpAddressAddr	1.3.6.1.4.1.6141.2.62.1.2.14.3.10	InetAddress	read-only	This variable provides the IPV4 or the IPV6 address of the device that this topology event relates to
wwpESMFaultMib	1.3.6.1.4.1.6141.2.62.1.3
I32 wwpESMNumEvents	1.3.6.1.4.1.6141.2.62.1.3.1	Integer32	read-only	The total Number of Events in the WWP ESM system
I32 wwpESMNumAlerts	1.3.6.1.4.1.6141.2.62.1.3.2	Integer32	read-only	The total Number of Alerts in the WWP ESM system
I32 wwpESMEventsInBuffer	1.3.6.1.4.1.6141.2.62.1.3.3	Integer32	read-only	The Size of the Event Queue in the WWP ESM system
I32 wwpESMAlertsInBuffer	1.3.6.1.4.1.6141.2.62.1.3.4	Integer32	read-only	The Size of the Alert Queue in the WWP ESM system
STR alertUserPropNames	1.3.6.1.4.1.6141.2.62.1.3.5	DisplayString	read-write	This variable indicates to the agent what all user property values the user would like to see in the alertUserProperties variable of the AlertTable This also provides for the facility of viewing all the user property-values by specifying the word 'all' . If the user needs to see only a few specific user property values ,then he needs to specify them explicitly SYNTAX1 all SYNTAX2 userPropName1,userPropName2,... The values for the properties will be in the following format: userPropName1=value1,userPropName2=value2..
STR eventUserPropNames	1.3.6.1.4.1.6141.2.62.1.3.6	DisplayString	read-write	This variable indicates to the agent what all user properties value the user would like to see in the eventUserProperties variable in the EventTable This also provides for the facility of viewing all the user property-values by specifying the word 'all' . If the user needs to see only a few specific user property values ,then he needs to specify them explicitly SYNTAX1 all SYNTAX2 userPropName1,userPropName2,... The values for the properties will be in the following format: userPropName1=value1,userPropName2=value2..
alertTable	1.3.6.1.4.1.6141.2.62.1.3.7		not-accessible	This table describes all the elements of the alert. This table has been deprecated since the AlertSource column is not an index column. This table has been replaced by AlarmTable.
alertEntry	1.3.6.1.4.1.6141.2.62.1.3.7.1		not-accessible	An entry of the alert table
G32 alertCreateTime	1.3.6.1.4.1.6141.2.62.1.3.7.1.3	Gauge32	read-only	This variable states the time of creation of the alert.This corresponds to the CreateTime entry in the Alert Table in the database
STR alertSource	1.3.6.1.4.1.6141.2.62.1.3.7.1.4	DisplayString	read-only	This variable indicates the source of the alert i.e., from where the alert generated.This corresponds to the Source entry in the Alert Table in the database
G32 alertModTime	1.3.6.1.4.1.6141.2.62.1.3.7.1.5	Gauge32	read-only	This variable states the latest time at which the alert status was modified.This corresponds to the ModTime entry in the Alert Table in the database
I32 alertPreviousSeverity	1.3.6.1.4.1.6141.2.62.1.3.7.1.7	Integer32	read-only	This variable states the previous severity of the alert.This corresponds to the PreviousSeverity entry in the Alert Table in the database
STR alertUserProperties	1.3.6.1.4.1.6141.2.62.1.3.7.1.9	DisplayString	read-only	This variable describes the values ot the user properties which the user specifies in the alertUserPropNames variable in the alert table. The values will be displayed in the following format: userPropName1=value1,userPropName2=value2,...
alertNotificationMib	1.3.6.1.4.1.6141.2.62.1.3.8
STR alertExtraPropNames	1.3.6.1.4.1.6141.2.62.1.3.8.1	DisplayString	read-write	The extra properties which the user wants to be sent with the pre-defined notificaiton varbinds. It should be in the following format. SYNTAX: propName1,propName2,... The values for the properties will be in the following format: propName1=value1,propName2=value2..
alertNotiPrefix	1.3.6.1.4.1.6141.2.62.1.3.8.2
alertNotifications	1.3.6.1.4.1.6141.2.62.1.3.8.2.0
NTF alertCriticalNotification	1.3.6.1.4.1.6141.2.62.1.3.8.2.0.1			The ESM-Agent sends an alertCriticalNotification to the manager indicating that an alert of 'Critical' severity has been raised on a MO
NTF alertMajorNotification	1.3.6.1.4.1.6141.2.62.1.3.8.2.0.2			The ESM-Agent sends an alertMajorNotification to the manager indicating that an alert of 'Major' severity has been raised on a MO
NTF alertMinorNotification	1.3.6.1.4.1.6141.2.62.1.3.8.2.0.3			The ESM-Agent sends an alertMinorNotification to the manager indicating that an alert of 'Minor' severity has been raised on a MO
NTF alertWarningNotification	1.3.6.1.4.1.6141.2.62.1.3.8.2.0.4			The ESM-Agent sends an alertWarningNotification to the manager indicating that an alert of 'Warning' severity has been raised on a MO
NTF alertClearNotification	1.3.6.1.4.1.6141.2.62.1.3.8.2.0.5			The ESM-Agent sends an alertClearNotification to the manager indicating that one or more previously reported alerts have been cleared
NTF alertCustomNBINotification	1.3.6.1.4.1.6141.2.62.1.3.8.2.0.6			The ESM-Agent sends an alertCustomNBINotification to the manager for every SNMP v1 or v2 notification received from the device
alertNotiVarbinds	1.3.6.1.4.1.6141.2.62.1.3.8.3
STR alertEntity	1.3.6.1.4.1.6141.2.62.1.3.8.3.1	DisplayString	read-only	This variable states the unique source of the alert which uniquely identifies any alert in the table
STR alertOwnerName	1.3.6.1.4.1.6141.2.62.1.3.8.3.2	DisplayString	read-only	This variable states the name of the owner of the alert
STR alertDescription	1.3.6.1.4.1.6141.2.62.1.3.8.3.3	DisplayString	read-only	This variable describes the alert
TIK alertTimeStamp	1.3.6.1.4.1.6141.2.62.1.3.8.3.4	TimeTicks	read-only	This variable indicates the time at which the alert was last modified
I32 alertNotificationId	1.3.6.1.4.1.6141.2.62.1.3.8.3.5	Integer32	read-only	This variable indicates the id of the generated alert
STR alertCategory	1.3.6.1.4.1.6141.2.62.1.3.8.3.6	DisplayString	read-only	This variable provides a string representation of the category of the alert
STR alertExtraProperties	1.3.6.1.4.1.6141.2.62.1.3.8.3.7	DisplayString	read-only	The values for the user properties which the user specifies in the alertExtraPropNames variable are sent as part of the notifications The values will be displayed in the following format: propName1=value1,propName2=vaule2,....
IP alertIpAddress	1.3.6.1.4.1.6141.2.62.1.3.8.3.8	IpAddress	read-only	This variable provides the IP address of the device that this alert relates to.
TIK alertEmsTime	1.3.6.1.4.1.6141.2.62.1.3.8.3.9	TimeTicks	read-only	Default value indicates the sysUpTime of ESM.
TIK alertNeTime	1.3.6.1.4.1.6141.2.62.1.3.8.3.10	TimeTicks	read-only	Default value indicates the sysUpTime of source of this alarm.
STR alertEmsName	1.3.6.1.4.1.6141.2.62.1.3.8.3.11	DisplayString	read-only	Default value indicates the system name of ESM. Content may vary specific to customer deployments and as defined by trap customizer feature of ESM.
STR alertNeNodeId	1.3.6.1.4.1.6141.2.62.1.3.8.3.12	DisplayString	read-only	Default value indicates the system name (IP address) of source of this alarm. Content may vary specific to customer deployments and as defined by trap customizer feature of ESM.
STR alertObjectType	1.3.6.1.4.1.6141.2.62.1.3.8.3.13	DisplayString	read-only	Default value indicates the type of managed object that this trap refers to. Content may vary specific to customer deployments and as defined by trap customizer feature of ESM.
STR alertObjectName	1.3.6.1.4.1.6141.2.62.1.3.8.3.14	DisplayString	read-only	Default value indicates the name of managed object that this trap refers to. Content may vary specific to customer deployments and as defined by trap customizer feature of ESM.
STR alertSeverity	1.3.6.1.4.1.6141.2.62.1.3.8.3.15	DisplayString	read-only	Default value indicates the severity of the forwarded trap.Possible values: none, Clear, Intermediate, Critical, Major, Minor, Warning, Config, Info, Debug, Internal. Content may vary specific to customer deployments and as defined by trap customizer feature of ESM.
STR alertServiceAffecting	1.3.6.1.4.1.6141.2.62.1.3.8.3.16	DisplayString	read-only	Default value indicates if this trap is service affecting.Possible values: true,false. Content may vary specific to customer deployments and as defined by trap customizer feature of ESM.
STR alertProbableCauseDescription	1.3.6.1.4.1.6141.2.62.1.3.8.3.17	DisplayString	read-only	Default value indicates probable cause of notification received from device.Possible values: as defined in IANAItuProbableCause (IANA-ITU-ALARM-TC-MIB) Content may vary specific to customer deployments and as defined by trap customizer feature of ESM.
STR alertAdditionalText	1.3.6.1.4.1.6141.2.62.1.3.8.3.18	DisplayString	read-only	Default value indicates additional text describing alarm being raised. Content may vary specific to customer deployments and as defined by trap customizer feature of ESM.
STR alertEventType	1.3.6.1.4.1.6141.2.62.1.3.8.3.19	DisplayString	read-only	Default value indicates event type describing alarm being raised.Possible values: as defined in IANAItuEventType (IANA-ITU-ALARM-TC-MIB). Content may vary specific to customer deployments and as defined by trap customizer feature of ESM.
STR alertNeNodeName	1.3.6.1.4.1.6141.2.62.1.3.8.3.20	DisplayString	read-only	Default value indicates the system name (DNS name if available, IP address if name cannot be resolved) of source of this alarm. Content may vary specific to customer deployments and as defined by trap customizer feature of ESM.
IPt alertIpAddressAddrType	1.3.6.1.4.1.6141.2.62.1.3.8.3.21	InetAddressType	read-only	This variable provides the IP Address type of the device that this alert relates to
IP alertIpAddressAddr	1.3.6.1.4.1.6141.2.62.1.3.8.3.22	InetAddress	read-only	This variable provides the V4/V6 IP Address of the device that this alert relates to
eventTable	1.3.6.1.4.1.6141.2.62.1.3.9		not-accessible	This table describes the events in the event database
eventEntry	1.3.6.1.4.1.6141.2.62.1.3.9.1		not-accessible	An entry of the event Table
I32 evtID	1.3.6.1.4.1.6141.2.62.1.3.9.1.1	Integer32	read-only	This variable is the unique id (primary key) of this event object.This corresponds to the Id entry in the Event Table in the database
STR evtSource	1.3.6.1.4.1.6141.2.62.1.3.9.1.2	DisplayString	read-only	This variable is the source of the event.This corresponds to the Source entry in the Event Table in the database
STR evtEntity	1.3.6.1.4.1.6141.2.62.1.3.9.1.3	DisplayString	read-only	This variable is the Entity (also known as Failure Object) of the Event.This corresponds to the Entity entry in the Event Table in the database
I32 evtSeverity	1.3.6.1.4.1.6141.2.62.1.3.9.1.4	Integer32	read-only	This variable is the Severity of the Event object.This corresponds to the Severity entry in the Event Table in the database
STR evtCategory	1.3.6.1.4.1.6141.2.62.1.3.9.1.5	DisplayString	read-only	This variable gives the category of the event, like Topology events or Threshold event etc. This corresponds to the Category entry in the Event Table in the database
G32 evtTime	1.3.6.1.4.1.6141.2.62.1.3.9.1.6	Gauge32	read-only	This variable is the time of occurrence (creation), in milliseconds, of this Event object. This corresponds to the Ttime entry in the Event Table in the database
STR evtText	1.3.6.1.4.1.6141.2.62.1.3.9.1.7	DisplayString	read-only	This variable gives the descriptive text message of the event.This corresponds to the Text entry in the Event Table in the database
STR eventUserProperties	1.3.6.1.4.1.6141.2.62.1.3.9.1.8	DisplayString	read-only	This variable describes the values ot the user properties which the user specifies in the eventUserPropNames variable The values will be displayed in the following format: userPropName1=value1,userPropName2=value2,...
wwpESMSeverityTable	1.3.6.1.4.1.6141.2.62.1.3.10		not-accessible	This table shows the number of alarms of a particular severity.
wwpESMSeverityEntry	1.3.6.1.4.1.6141.2.62.1.3.10.1		not-accessible	An entry of the table
STR severityName	1.3.6.1.4.1.6141.2.62.1.3.10.1.1	DisplayString	read-only	This variable displays the name of severity like critical,major,minor etc.
I32 numberOfAlarms	1.3.6.1.4.1.6141.2.62.1.3.10.1.2	Integer32	read-only	This variable displays the number of alarms of a particular severity.
alarmTable	1.3.6.1.4.1.6141.2.62.1.3.11		not-accessible	This table describes various attributes of the ESM alarms. This is the replacement table for alertTable.This table has the following features other than those found in alertTable: 1. AlarmSource added as the first index along with AlarmOwnerName and AlarmEntity. 2. AlarmAssignedTo - a new column to describe the owner to whom the alarm assigned.
alarmEntry	1.3.6.1.4.1.6141.2.62.1.3.11.1		not-accessible	An entry of the alarmTable
STR alarmSource	1.3.6.1.4.1.6141.2.62.1.3.11.1.1	DisplayString	read-only	This variable indicates the source of the alarm i.e.,from where the alarm generated. This corresponds to the Source entry in the Alert Table in the database
STR alarmOwnerName	1.3.6.1.4.1.6141.2.62.1.3.11.1.2	DisplayString	read-only	This variable states the OwnerName for the alarm.This corresponds to the OwnerName entry in the Alert Table in the database
STR alarmEntity	1.3.6.1.4.1.6141.2.62.1.3.11.1.3	DisplayString	read-only	This variable states the unique name of each alarm which is used to identifies any alarm. This corresponds to the Entity field in the Alert Table in the database
I32 alarmSeverity	1.3.6.1.4.1.6141.2.62.1.3.11.1.4	Integer32	read-only	This variable describes the severity of the alarm in integer format. This corresponds to the Severity entry in the Alert Table in the database
I32 alarmPreviousSeverity	1.3.6.1.4.1.6141.2.62.1.3.11.1.5	Integer32	read-only	This variable states the previous severity of the alarm. This corresponds to the PreviousSeverity entry in the Alert Table in the database
G32 alarmCreateTime	1.3.6.1.4.1.6141.2.62.1.3.11.1.6	Gauge32	read-only	This variable states the time at which the alarm has been created. This corresponds to the CreateTime entry in the Alert Table in the database
G32 alarmModTime	1.3.6.1.4.1.6141.2.62.1.3.11.1.7	Gauge32	read-only	This variable states the latest time at which the alarm status was modified. This corresponds to the ModTime entry in the Alert Table in the database
STR alarmCategory	1.3.6.1.4.1.6141.2.62.1.3.11.1.8	DisplayString	read-only	This variable describes the category to which the alarm belongs to, in a string form. This corresponds to the Category entry in the Alert Table in the database
STR alarmAssignedTo	1.3.6.1.4.1.6141.2.62.1.3.11.1.9	DisplayString	read-only	This variable describes the owner to whom the alarm has assigned. This corresponds to the Who entry in the Alert Table in the database
STR alarmUserProperties	1.3.6.1.4.1.6141.2.62.1.3.11.1.10	DisplayString	read-only	This variable describes the values of the user properties which the user specifies in the alertUserPropNames variable in the WebESMFaultMib module. The values will be displayed in the following format: userPropName1=value1,userPropName2=value2,...
wwpESMPerformanceMib	1.3.6.1.4.1.6141.2.62.1.4
I32 numPollObjects	1.3.6.1.4.1.6141.2.62.1.4.1	Integer32	read-only	This variable displays the total number of PolledData objects currently present in the Polling engine.
I32 numActivePollers	1.3.6.1.4.1.6141.2.62.1.4.2	Integer32	read-only	This variable displays the total number of active pollers at that time.
I32 numThresholdObjects	1.3.6.1.4.1.6141.2.62.1.4.3	Integer32	read-only	This variable displays the total number of threshold objects available
pollTable	1.3.6.1.4.1.6141.2.62.1.4.4		not-accessible	The table describes the polleddatas in the database
pollEntry	1.3.6.1.4.1.6141.2.62.1.4.4.1		not-accessible	It describes the various entries of the performance table
G32 pollID	1.3.6.1.4.1.6141.2.62.1.4.4.1.1	Gauge32	read-only	This variable represents the id of the PolledData. It is assigned by the poll engine when the PolledData is created and it is a unique value for every PolledData.This corresponds to the Id entry in the PolledDataTable in the database
STR polldataName	1.3.6.1.4.1.6141.2.62.1.4.4.1.2	DisplayString	read-only	This variable represents the name of the PolledData, which is a user assigned name for identification purposes.This corresponds to the Name entry in the PolledData Table in the database
STR oid	1.3.6.1.4.1.6141.2.62.1.4.4.1.3	DisplayString	read-only	This variable represents the OID that is being polled for on the agent.This corresponds to the oid entry in the PolledData Table in the database
G32 pollingInterval	1.3.6.1.4.1.6141.2.62.1.4.4.1.4	Gauge32	read-only	This variable represents the polling interval of this PolledData.This corresponds to the Period entry in the PolledData Table in the database
I32 failureCount	1.3.6.1.4.1.6141.2.62.1.4.4.1.5	Integer32	read-only	This variable represents the failureCount for this PolledData.This corresponds to the FailureCount entry in the PolledData Table in the database
I32 failureThreshold	1.3.6.1.4.1.6141.2.62.1.4.4.1.6	Integer32	read-only	This variable represents the failureThreshold for this PolledData.This corresponds to the FailureThreshold entry in the PolledData Table in the database
G32 timeToPoll	1.3.6.1.4.1.6141.2.62.1.4.4.1.7	Gauge32	read-only	This variable states the time at which polling has to be done again.This corresponds to the TimeVal entry in the PolledData Table in the database
G32 polledTime	1.3.6.1.4.1.6141.2.62.1.4.4.1.8	Gauge32	read-only	This variable states the time at which the polling was done.This corresponds to the LastTimeValue entry in the PolledData Table in the database
STR agentName	1.3.6.1.4.1.6141.2.62.1.4.4.1.9	DisplayString	read-only	This variable represents the Agent Name
thresholdTable	1.3.6.1.4.1.6141.2.62.1.4.5		not-accessible	A table showing all data related to threshold objects
thresholdEntry	1.3.6.1.4.1.6141.2.62.1.4.5.1		not-accessible	All the entries of the threshold table
STR thresholdObjectName	1.3.6.1.4.1.6141.2.62.1.4.5.1.1	DisplayString	read-only	This variable states the name of the threshold object.
STR thresholdKind	1.3.6.1.4.1.6141.2.62.1.4.5.1.2	DisplayString	read-only	This variable states whether the threshold is of type long,string or percentage.
STR thresholdMessage	1.3.6.1.4.1.6141.2.62.1.4.5.1.3	DisplayString	read-only	This variable displays the message generated when the threshold occurs.
STR thresholdClearMessage	1.3.6.1.4.1.6141.2.62.1.4.5.1.4	DisplayString	read-only	This variable displays the message to be generated on clearing of the threshold .
I32 thresholdSeverity	1.3.6.1.4.1.6141.2.62.1.4.5.1.5	Integer32	read-only	The severity of the event generated.
STR thresholdCategory	1.3.6.1.4.1.6141.2.62.1.4.5.1.6	DisplayString	read-only	This variable displays the category of this ThresholdObject. Category of the ThresholdObject represents the category in which the events will be generated in case of thresholds.
statsdata	1.3.6.1.4.1.6141.2.62.1.4.6
STR statsdataTableName	1.3.6.1.4.1.6141.2.62.1.4.6.1	DisplayString	read-write	This variable states the name of the table of the statsdata table, the details of which,the user wants to view.The user needs to enter values in the form of statsdata% or statsdataMM_DD_YY.If the user gives statsdata%,then the current day is taken.
statsDataTable	1.3.6.1.4.1.6141.2.62.1.4.6.2		not-accessible	This table exposes the statsdata table of the database for the day
statsDataEntry	1.3.6.1.4.1.6141.2.62.1.4.6.2.1		not-accessible	Each entry contains the data like time,oidindex and value for a particular pollid
STR time	1.3.6.1.4.1.6141.2.62.1.4.6.2.1.2	DisplayString	read-only	This variable states the time at which the data was collected
STR oidindex	1.3.6.1.4.1.6141.2.62.1.4.6.2.1.3	DisplayString	read-only	This variable states the instance of the collected data
STR value	1.3.6.1.4.1.6141.2.62.1.4.6.2.1.4	DisplayString	read-only	This variable states the value of the collected data
perfNotificationMib	1.3.6.1.4.1.6141.2.62.1.4.7
perfNotiConfigPrefix	1.3.6.1.4.1.6141.2.62.1.4.7.1
perfNotifications	1.3.6.1.4.1.6141.2.62.1.4.7.1.0
perfNotiVarbinds	1.3.6.1.4.1.6141.2.62.1.4.7.2
I32 eventid	1.3.6.1.4.1.6141.2.62.1.4.7.2.1	Integer32	read-only	This variable is the unique id (primary key) of this event object.
STR eventsource	1.3.6.1.4.1.6141.2.62.1.4.7.2.2	DisplayString	read-only	This variable is the source of the event
STR eventEntity	1.3.6.1.4.1.6141.2.62.1.4.7.2.3	DisplayString	read-only	This variable is the Entity (also known as Failure Object) of the Event.
G32 eventGenTime	1.3.6.1.4.1.6141.2.62.1.4.7.2.4	Gauge32	read-only	This variable is the time of occurrence (creation), in milliseconds, of this Event object.
I32 eventSeverity	1.3.6.1.4.1.6141.2.62.1.4.7.2.5	Integer32	read-only	This variable is the Severity of the Event object.
persistentTrapsMib	1.3.6.1.4.1.6141.2.62.1.5
I32 maxRows	1.3.6.1.4.1.6141.2.62.1.5.1	Integer32	read-write	This variable states the maximum number of rows that can be stored in the notilog table of the database.Once it exceeds the limit, the oldest row will be deleted from the database and the new row will be added.We can retrieve only that many number of rows from the notilog table as specified.
I32 sequenceNum	1.3.6.1.4.1.6141.2.62.1.5.2	Integer32	read-only	This variable represents the index number of the last transmitted notification and is incremented by 1 whenever a notification is emitted from the agent. This would be included as a varbind for all notification.
notiLogTable	1.3.6.1.4.1.6141.2.62.1.5.3		not-accessible	This table contains the general information about the logged notifications.
notiLogEntry	1.3.6.1.4.1.6141.2.62.1.5.3.1		not-accessible	An entry in the notiLog table.
I32 notiLogIndex	1.3.6.1.4.1.6141.2.62.1.5.3.1.1	Integer32	read-only	This variable's purpose is to index the entries / distinguish the rows within this table. The value of this variable is the same as that of the sequenceNum defined in the mib. This table backs up all the transmitted notifications and facilitates selective recovery of lost notifications via their sequence numbers.
G32 notiLogTime	1.3.6.1.4.1.6141.2.62.1.5.3.1.2	Gauge32	read-only	This variable represents the value of sysUpTime when the entry occurred
I32 notiLogNumVarBinds	1.3.6.1.4.1.6141.2.62.1.5.3.1.3	Integer32	read-only	This column indicates the number of variable bindings in the logged notification.
OID notiLogOid	1.3.6.1.4.1.6141.2.62.1.5.3.1.4	OBJECT IDENTIFIER	read-only	This column indicates the OID of the Notification definition.
varbindLogTable	1.3.6.1.4.1.6141.2.62.1.5.4		not-accessible	This table contains the information of the varbinds sent during sending a notification. All the varbinds to the notifications are logged in this table except for the sequence number of the notification which serves as an index for this table.
varbindLogEntry	1.3.6.1.4.1.6141.2.62.1.5.4.1		not-accessible	An entry in the Notification Log variable table.
I32 varbindIndex	1.3.6.1.4.1.6141.2.62.1.5.4.1.1	Integer32	read-only	This variable's purpose is to provide the second level index to distinguish the entries / rows within this table. This value always starts at 1 and goes upto the maximum number of varbinds for a notification as indicated by in the notification log table.
INT varbindType	1.3.6.1.4.1.6141.2.62.1.5.4.1.2	INTEGER	read-only	This specifies the type of the varbind that was sent as part of a Notification.
STR varbindValue	1.3.6.1.4.1.6141.2.62.1.5.4.1.3	DisplayString	read-only	This variable provides the value of the corresponding varbind
tftpMib	1.3.6.1.4.1.6141.2.62.1.6
STR serverName	1.3.6.1.4.1.6141.2.62.1.6.1	DisplayString	read-write	This variable describes the name of the TFTP-server to or from which a file has to be sent or obtained
I32 portNum	1.3.6.1.4.1.6141.2.62.1.6.2	Integer32	read-write	This variable states the port at which the file has to sent or obtained to or from the server respectively.
STR sourceFile	1.3.6.1.4.1.6141.2.62.1.6.3	DisplayString	read-write	This variable states the name of the file to be obtained from the server [GET(1)] or sent to the server [PUT(2)].
STR destinationFile	1.3.6.1.4.1.6141.2.62.1.6.4	DisplayString	read-write	This variable states the name of the file to be sent to the device [GET(1)] or obtained from the device [PUT(2)].
T/F tftpMode	1.3.6.1.4.1.6141.2.62.1.6.5	TruthValue	read-write	This variable states the mode of file-transfer
T/F request	1.3.6.1.4.1.6141.2.62.1.6.6	TruthValue	read-write	This variable states the operation to be performed .The operations that can be performed are: sending the file to a tftp server or getting a file from a tftp server. This variable takes two values indicating the type of operation performed. The value that this variable takes are :- (1) getting a file from a tftp server (2) sending a file to a tftp server
proxyService	1.3.6.1.4.1.6141.2.62.1.7
proxyTable	1.3.6.1.4.1.6141.2.62.1.7.1		not-accessible	This table is used to obtain the current value of an oid from a device .The values that the user needs to set are : IpAddress, Port,Community, OID and service. When the last value is set,the value for the oid is obtained
proxyEntry	1.3.6.1.4.1.6141.2.62.1.7.1.1		not-accessible	An entry of the table
I32 serialNumber	1.3.6.1.4.1.6141.2.62.1.7.1.1.1	Integer32	read-only	An incremental integer for the purpose of identifying the row
STR hostName	1.3.6.1.4.1.6141.2.62.1.7.1.1.2	DisplayString	read-write	This states the DNS name or IpAddress of the device from which the value needs to be obtained
I32 devicePort	1.3.6.1.4.1.6141.2.62.1.7.1.1.3	Integer32	read-write	The port of the device from which the value needs to be obtained
OID requestOid	1.3.6.1.4.1.6141.2.62.1.7.1.1.4	OBJECT IDENTIFIER	read-write	This states the oid in the device whose value is needs to be obtained.
STR community	1.3.6.1.4.1.6141.2.62.1.7.1.1.5	DisplayString	read-write	The community which may be specified.It is an optional field.If the community value is not specified,the default community 'public' will be taken
INT service	1.3.6.1.4.1.6141.2.62.1.7.1.1.6	INTEGER	read-write	This variable takes two values ,1 and 2,which when set carry out SNMP operations: 1 for snmpGet 2 for snmpGetNext
STR result	1.3.6.1.4.1.6141.2.62.1.7.1.1.7	DisplayString	read-only	This variable displays the result of the service :snmpGet/snmpGetNext of the specified oid in the specified device.If any of the specified data is not correct or if the host is not functioning properly then an exception Error in Data will be filled
subagents	1.3.6.1.4.1.6141.2.62.1.8
subAgentTable	1.3.6.1.4.1.6141.2.62.1.8.1		not-accessible	The table having the details of sub-agents
subAgentEntry	1.3.6.1.4.1.6141.2.62.1.8.1.1		not-accessible	An entry in the table
OID subAgentoid	1.3.6.1.4.1.6141.2.62.1.8.1.1.1	OBJECT IDENTIFIER	read-write	This states the oid of the sub-agent whose value is to be obtained from the sub-agent
STR subAgent	1.3.6.1.4.1.6141.2.62.1.8.1.1.2	DisplayString	read-create	This variable states the sub-agent name to whom the request is sent.
U32 subAgentPort	1.3.6.1.4.1.6141.2.62.1.8.1.1.3	Unsigned32	read-create	This states the sub- Agent's Port number at which the value has to be got.
I32 subAgentVersion	1.3.6.1.4.1.6141.2.62.1.8.1.1.4	Integer32	read-create	Description
STR subAgentCommunity	1.3.6.1.4.1.6141.2.62.1.8.1.1.5	DisplayString	read-create	This specifies the sub- Agent community to which the request is sent.
U32 timeout	1.3.6.1.4.1.6141.2.62.1.8.1.1.6	Unsigned32	read-create	This specifies the time period one has to wait for,to get a response from the sub agent.
U32 subAgentRetries	1.3.6.1.4.1.6141.2.62.1.8.1.1.7	Unsigned32	read-create	Description
ROW rowStatus	1.3.6.1.4.1.6141.2.62.1.8.1.1.8	RowStatus	read-write	This specifies the process by which the data have to be entered. This is the first value which needs to be set.. the value of 1 specifies 'active' the value of 2 specifies 'notInService' the value of 3 specifies 'notReady' the value of 4 specifies 'createAndGo'. the value of 5 specifies 'createAndWait' the value of 6 specifies 'destroy'
trapForwardingModule	1.3.6.1.4.1.6141.2.62.1.9
v1v2TrapForwardingTable	1.3.6.1.4.1.6141.2.62.1.9.1		not-accessible	This table maintains the SNMP v1 and v2c managers information like manager IP address, port number,community, time out, retires, etc which are used in trap generation. Timeout and retires are used in the case of SNMPv2c INFORM.
v1v2TrapForwardingEntry	1.3.6.1.4.1.6141.2.62.1.9.1.1		not-accessible	Each entry in this table refers one manager information who is registered to receive traps fromt the agent.
IP v1v2ManagerHost	1.3.6.1.4.1.6141.2.62.1.9.1.1.1	IpAddress	not-accessible	IP address where the manager is listening to receive traps from the agent.
I32 v1v2ManagerPort	1.3.6.1.4.1.6141.2.62.1.9.1.1.2	Integer32	not-accessible	The port at which manager is listening for the traps from the agent.
I32 v1v2ManagerVersion	1.3.6.1.4.1.6141.2.62.1.9.1.1.3	Integer32	read-create	Description
STR v1v2ManagerCommunity	1.3.6.1.4.1.6141.2.62.1.9.1.1.4	DisplayString	read-create	The community used by the agent to send trap or inform to this manager.
U32 v1v2ManagerTimeOut	1.3.6.1.4.1.6141.2.62.1.9.1.1.5	Unsigned32	read-create	The time out value in seconds for SNMPv2c INFORM.
U32 v1v2ManagerRetries	1.3.6.1.4.1.6141.2.62.1.9.1.1.6	Unsigned32	read-create	The number of retries in the case of SNMPV2c INFORM.
ROW v1v2ManagerStatus	1.3.6.1.4.1.6141.2.62.1.9.1.1.7	RowStatus	read-create	The status of this conceptual row.Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the usmUserStatus column is 'notReady'
v3TrapForwardingTable	1.3.6.1.4.1.6141.2.62.1.9.2		not-accessible	This table maintains the SNMP v3 managers information like manager IP address, port number, user name,security model, context name, community, time out,retires, etc which are used in trap generation. Timeout and retires are used in the case of INFORM.
v3TrapForwardingEntry	1.3.6.1.4.1.6141.2.62.1.9.2.1		not-accessible	Each entry in this table refers one SNMPv3 manager who will listen for TRAP or INFORM.
IP v3ManagerHost	1.3.6.1.4.1.6141.2.62.1.9.2.1.1	IpAddress	not-accessible	The IP address where the manager is listening for TRAPS or INFORMS.
I32 v3ManagerPort	1.3.6.1.4.1.6141.2.62.1.9.2.1.2	Integer32	not-accessible	The UDP port at which manager is listening for TRAPS or INFORMS.
I32 v3ManagerVersion	1.3.6.1.4.1.6141.2.62.1.9.2.1.3	Integer32	read-create	Description
STR v3ManagerCommunity	1.3.6.1.4.1.6141.2.62.1.9.2.1.4	DisplayString	read-create	The community string used by the agent when sending SNMP v1/v2c TRAPS or INFORMS to the manager.It used to support backward compatability,i.e. without any change in the table,user can send both SNMPv1 and v2c TARPS and INFORMS.
STR v3ManagerUserName	1.3.6.1.4.1.6141.2.62.1.9.2.1.5	DisplayString	read-create	This user name is same as in USM MIB RFC 2574.
U32 v3ManagerUserSecModel	1.3.6.1.4.1.6141.2.62.1.9.2.1.6	Unsigned32	read-create	This security model value is same as in USM table of USM MIB RFC2574.
I32 v3ManagerUserSecLevel	1.3.6.1.4.1.6141.2.62.1.9.2.1.7	Integer32	read-create	Description
STR v3ManagerUserContextName	1.3.6.1.4.1.6141.2.62.1.9.2.1.8	DisplayString	read-create	This context name is same as in VacmAccessTable of VACM MIB RFC2575.
U32 v3ManagerTimeOut	1.3.6.1.4.1.6141.2.62.1.9.2.1.9	Unsigned32	read-create	The time out value in seconds for INFORM request.
U32 v3ManagerRetries	1.3.6.1.4.1.6141.2.62.1.9.2.1.10	Unsigned32	read-create	The number of retries for a failed INFORM reqeust.
ROW v3ManagerStatus	1.3.6.1.4.1.6141.2.62.1.9.2.1.11	RowStatus	read-create	The status of this conceptual row.Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the usmUserStatus column is 'notReady'
esmConfiguration	1.3.6.1.4.1.6141.2.62.1.10
topologyConfiguration	1.3.6.1.4.1.6141.2.62.1.10.1
T/F autoDiscover	1.3.6.1.4.1.6141.2.62.1.10.1.1	TruthValue	read-write	This variable takes integer values like 1 for true and 2 for false.This variable states whether the auto discovery process should start or not
T/F discoverLocalNet	1.3.6.1.4.1.6141.2.62.1.10.1.2	TruthValue	read-write	This variable states whether the local network should be discovered or not
I32 discoverInterval	1.3.6.1.4.1.6141.2.62.1.10.1.3	Integer32	read-write	The time interval in which the discovery process should occur
T/F enableLog	1.3.6.1.4.1.6141.2.62.1.10.1.4	TruthValue	read-write	This variable states whether the logging should be enabled or not
rediscoveryConfiguration	1.3.6.1.4.1.6141.2.62.1.10.1.5
T/F reDiscover	1.3.6.1.4.1.6141.2.62.1.10.1.5.1	TruthValue	read-write	This variable states whether the node which is already discovered should be discovered again or not
I32 reDiscoverInterval	1.3.6.1.4.1.6141.2.62.1.10.1.5.2	Integer32	read-write	The time interval in which the rediscovery takes place
STR hour	1.3.6.1.4.1.6141.2.62.1.10.1.5.3	DisplayString	read-write	This variable states the time in hours at whicgh the discovery should be done again
STR dayOfWeek	1.3.6.1.4.1.6141.2.62.1.10.1.5.4	DisplayString	read-write	This variable states the time in terms of the days of the week when the rediscovery is scheduled to be done
STR dayOfMonth	1.3.6.1.4.1.6141.2.62.1.10.1.5.5	DisplayString	read-write	This variable states the time in terms of the days of the month when the rediscovery is scheduled to be done
snmpPingConfiguration	1.3.6.1.4.1.6141.2.62.1.10.1.6
T/F enableSnmpPing	1.3.6.1.4.1.6141.2.62.1.10.1.6.1	TruthValue	read-write	This variable states if the snmp ping should be enabled or not
I32 snmpPingRetries	1.3.6.1.4.1.6141.2.62.1.10.1.6.2	Integer32	read-write	The number of retries for snmp-ping while discovery
I32 snmpPingTimeout	1.3.6.1.4.1.6141.2.62.1.10.1.6.3	Integer32	read-write	The maximum time taken to wait for a response
STR snmpPort	1.3.6.1.4.1.6141.2.62.1.10.1.6.4	DisplayString	read-write	This variable states the snmp port
STR readCommunity	1.3.6.1.4.1.6141.2.62.1.10.1.6.5	DisplayString	read-write	This variable states the read community
STR writeCommunity	1.3.6.1.4.1.6141.2.62.1.10.1.6.6	DisplayString	read-write	This variable states the writed community
snmpV3Configuration	1.3.6.1.4.1.6141.2.62.1.10.1.6.7
T/F enableV3	1.3.6.1.4.1.6141.2.62.1.10.1.6.7.1	TruthValue	read-write	This variable states whether v3 be enabled or not
STR v3UserName	1.3.6.1.4.1.6141.2.62.1.10.1.6.7.2	DisplayString	read-write	Whenever v3 is enabled, the user needs to give the user name
STR v3ContextName	1.3.6.1.4.1.6141.2.62.1.10.1.6.7.3	DisplayString	read-write	Whenever v3 is enabled, the user needs to give the context name
icmpPingConfiguration	1.3.6.1.4.1.6141.2.62.1.10.1.7
T/F enableIcmp	1.3.6.1.4.1.6141.2.62.1.10.1.7.1	TruthValue	read-write	This variable states whether icmp ping be enabled or not
I32 icmpPingRetries	1.3.6.1.4.1.6141.2.62.1.10.1.7.2	Integer32	read-write	The number of retries for icmp-ping while discovery
nativePingConfiguration	1.3.6.1.4.1.6141.2.62.1.10.1.8
I32 nativePingRetries	1.3.6.1.4.1.6141.2.62.1.10.1.8.1	Integer32	read-write	The number of time native-ping must be done while discovery
I32 nativePingTimeOut	1.3.6.1.4.1.6141.2.62.1.10.1.8.2	Integer32	read-write	This variable states the max time that need be waited for to get a response back
I32 debugLevel	1.3.6.1.4.1.6141.2.62.1.10.1.8.3	Integer32	read-write	This variable states the debug level
T/F enableSweep	1.3.6.1.4.1.6141.2.62.1.10.1.8.4	TruthValue	read-write	This variable states whether sweep be enabled or not
I32 sweepPkts	1.3.6.1.4.1.6141.2.62.1.10.1.8.5	Integer32	read-write	This variable states the number of sweep packets
I32 sweepSleepInterval	1.3.6.1.4.1.6141.2.62.1.10.1.8.6	Integer32	read-write	This variable states the interval at which sweep must be done
networkDiscoveryTable	1.3.6.1.4.1.6141.2.62.1.10.1.9		not-accessible	This table stores the criteria for the discovery of networks in the ESM
networkDiscoveryEntry	1.3.6.1.4.1.6141.2.62.1.10.1.9.1		not-accessible	Each entry states the discovery criteria for a network
I32 networkDiscoveryIndex	1.3.6.1.4.1.6141.2.62.1.10.1.9.1.1	Integer32	read-only	This variable states the index of the network discovery table
IP netIPAddress	1.3.6.1.4.1.6141.2.62.1.10.1.9.1.2	IpAddress	read-write	This variable states the ipaddress of the network which has to be discovered
STR startIPAddress	1.3.6.1.4.1.6141.2.62.1.10.1.9.1.4	DisplayString	read-write	This variable states the ipaddress from which the discovery process should start for the network
STR endIPAddress	1.3.6.1.4.1.6141.2.62.1.10.1.9.1.5	DisplayString	read-write	This variable states the ipaddress till which the discovery process should proceed for the network
T/F doDiscovery	1.3.6.1.4.1.6141.2.62.1.10.1.9.1.6	TruthValue	read-write	This variable states whether a particular network should be discovered or not
T/F dhcp	1.3.6.1.4.1.6141.2.62.1.10.1.9.1.7	TruthValue	read-write	This variable states whether the network supports DHCP or not
nodeDiscoveryTable	1.3.6.1.4.1.6141.2.62.1.10.1.10		not-accessible	This table contains the node discovery criteria
nodeDiscoveryEntry	1.3.6.1.4.1.6141.2.62.1.10.1.10.1		not-accessible	`This contains the entry of NodeDiscTable which has the criteria for discovery of a node
IP nodeIP	1.3.6.1.4.1.6141.2.62.1.10.1.10.1.1	IpAddress	read-only	This variable states the ipaddress of the node to be discovered
IP nodeNetMask	1.3.6.1.4.1.6141.2.62.1.10.1.10.1.2	IpAddress	read-write	This variable states the net mask for the discovery of the node
T/F nodeDiscoverEnable	1.3.6.1.4.1.6141.2.62.1.10.1.10.1.3	TruthValue	read-write	This variable states whether a particular node should be discovered or not
I32 snmpAgentPort	1.3.6.1.4.1.6141.2.62.1.10.1.10.1.4	Integer32	read-write	This variable states the port at which the snmp agent is listening
STR nodeCommunity	1.3.6.1.4.1.6141.2.62.1.10.1.10.1.5	DisplayString	read-write	This variable states the community of the node to be discovered
T/F snmpVersion	1.3.6.1.4.1.6141.2.62.1.10.1.10.1.6	TruthValue	read-write	This variable states the version of snmp
moCriteriaTable	1.3.6.1.4.1.6141.2.62.1.10.1.11		not-accessible	This table contains the various criteria for discovery in order to further refine the search
moCriteriaEntry	1.3.6.1.4.1.6141.2.62.1.10.1.11.1		not-accessible	Each entry of this table contains some criteria for making the discovery process further refined
I32 criteriaIndex	1.3.6.1.4.1.6141.2.62.1.10.1.11.1.1	Integer32	read-only	This variable uniquely identifies each entry of the table
T/F propertyName	1.3.6.1.4.1.6141.2.62.1.10.1.11.1.2	TruthValue	read-write	This variable states the property name on which basis the discovery should be done
STR propertyValue	1.3.6.1.4.1.6141.2.62.1.10.1.11.1.3	DisplayString	read-write	This variable states the value for a property,on which basis discovery should be done
T/F allow	1.3.6.1.4.1.6141.2.62.1.10.1.11.1.4	TruthValue	read-write	This variable states whether the criteria for discovery should be considered or not
discoveryFilterTable	1.3.6.1.4.1.6141.2.62.1.10.1.12		not-accessible	This table has the discovery filter class names
discoveryFilterEntry	1.3.6.1.4.1.6141.2.62.1.10.1.12.1		not-accessible	Each entry of this table has the discovery filter class name
I32 discFilterIndex	1.3.6.1.4.1.6141.2.62.1.10.1.12.1.1	Integer32	read-only	An incremental integer for uniquely identifying each element of the table
STR discFilterClassName	1.3.6.1.4.1.6141.2.62.1.10.1.12.1.2	DisplayString	read-write	This variable states the class Name of the discovery filter file
faultConfIguration	1.3.6.1.4.1.6141.2.62.1.10.2
trapFilterTable	1.3.6.1.4.1.6141.2.62.1.10.2.1		not-accessible	This table states the class names of the various trap filters
trapFilterEntry	1.3.6.1.4.1.6141.2.62.1.10.2.1.1		not-accessible	Each entry of the table contains the name of the class of a trap filter
I32 trapFilterIndex	1.3.6.1.4.1.6141.2.62.1.10.2.1.1.1	Integer32	read-only	The user defined name for the trap filter
STR alertFilterClassName	1.3.6.1.4.1.6141.2.62.1.10.2.1.1.2	DisplayString	read-write	The class name of the trap filter
STR trapFilterName	1.3.6.1.4.1.6141.2.62.1.10.2.1.1.3	DisplayString	read-write	This variable states the name of the trap filter
T/F trapFilterEnable	1.3.6.1.4.1.6141.2.62.1.10.2.1.1.4	TruthValue	read-write	This variable states if the trap filter should be enabled or not
STR genericType	1.3.6.1.4.1.6141.2.62.1.10.2.1.1.6	DisplayString	read-write	A property of snmp
STR specificType	1.3.6.1.4.1.6141.2.62.1.10.2.1.1.7	DisplayString	read-write	A property of snmp
STR enterpriseOID	1.3.6.1.4.1.6141.2.62.1.10.2.1.1.8	DisplayString	read-write	When the snmp version is v3,this variable needs to be stated
STR trapOID	1.3.6.1.4.1.6141.2.62.1.10.2.1.1.9	DisplayString	read-write	This variable states the oid of the trap to be sent
T/F setFilter	1.3.6.1.4.1.6141.2.62.1.10.2.1.1.10	TruthValue	read-write	0: Do nothing 1: To set trap filter
performanceConfiguration	1.3.6.1.4.1.6141.2.62.1.10.3
pollingFiltersTable	1.3.6.1.4.1.6141.2.62.1.10.3.1		not-accessible	This table contains various poll-filters
pollingFiltersEntry	1.3.6.1.4.1.6141.2.62.1.10.3.1.1		not-accessible	Each entry of the table contains a poll-filter
I32 pollingFilterIndex	1.3.6.1.4.1.6141.2.62.1.10.3.1.1.1	Integer32	read-only	An incremental integer to uniquely identify each entry of the table
STR pollingFilterClassName	1.3.6.1.4.1.6141.2.62.1.10.3.1.1.2	DisplayString	read-write	This variable states the class names of the polling filters used
logConfiguration	1.3.6.1.4.1.6141.2.62.1.10.4
stdout	1.3.6.1.4.1.6141.2.62.1.10.4.1
STR name	1.3.6.1.4.1.6141.2.62.1.10.4.1.1	DisplayString	read-only	This states the name of the file
STR directory	1.3.6.1.4.1.6141.2.62.1.10.4.1.2	DisplayString	read-only	This states the directory in which the file will be present
I32 numFiles	1.3.6.1.4.1.6141.2.62.1.10.4.1.3	Integer32	read-write	This states the number of files of the same type may exist
I32 numLines	1.3.6.1.4.1.6141.2.62.1.10.4.1.4	Integer32	read-write	This states the number of lines that will be prresent in the file
T/F logging	1.3.6.1.4.1.6141.2.62.1.10.4.1.5	TruthValue	read-write	This variable takes in a truth value where 1(True) implies that the file be logged and 2(False) which implies that the file may not be logged
T/F timeStamp	1.3.6.1.4.1.6141.2.62.1.10.4.1.6	TruthValue	read-write	This variable also takes in a truth value where 1(True) implies that the time be noted during logging and 2(False) which denotes that the time not be noted
stderr	1.3.6.1.4.1.6141.2.62.1.10.4.2
STR filename	1.3.6.1.4.1.6141.2.62.1.10.4.2.1	DisplayString	read-only	This states the name of the file in which the logging has to be done
STR logDirectory	1.3.6.1.4.1.6141.2.62.1.10.4.2.2	DisplayString	read-only	This states the directory in which the file will be present
I32 filenum	1.3.6.1.4.1.6141.2.62.1.10.4.2.3	Integer32	read-write	This variable describes the number of files that may exist
I32 linenum	1.3.6.1.4.1.6141.2.62.1.10.4.2.4	Integer32	read-write	This variable states the number of lines that will be present in each file
T/F log	1.3.6.1.4.1.6141.2.62.1.10.4.2.5	TruthValue	read-write	This variable takes in a truth value where 1(True) implies that the file be logged and 2(False) which implies that the file may not be logged
T/F logTime	1.3.6.1.4.1.6141.2.62.1.10.4.2.6	TruthValue	read-write	This variable also takes in a truth value where 1(True) implies that the time be noted during logging and 2(False) which denotes that the time not be noted
logTable	1.3.6.1.4.1.6141.2.62.1.10.4.3		not-accessible	This table contains data regarding the logging of values
logEntry	1.3.6.1.4.1.6141.2.62.1.10.4.3.1		not-accessible	Each entry of this table states the log name and the data regarding its storage
I32 logIndex	1.3.6.1.4.1.6141.2.62.1.10.4.3.1.1	Integer32	read-only	This is an incremental integer which uniquely identifies each entry of the table
STR logFileName	1.3.6.1.4.1.6141.2.62.1.10.4.3.1.2	DisplayString	read-only	This variable states the file name of the log file
STR logDirName	1.3.6.1.4.1.6141.2.62.1.10.4.3.1.3	DisplayString	read-only	This variable states the directory name of the log file
I32 maxLines	1.3.6.1.4.1.6141.2.62.1.10.4.3.1.4	Integer32	read-write	This variable states the number of lines that can be stored in a single file
I32 maxFiles	1.3.6.1.4.1.6141.2.62.1.10.4.3.1.5	Integer32	read-write	This variable states the number of files of the same type can be formed
I32 linesCached	1.3.6.1.4.1.6141.2.62.1.10.4.3.1.6	Integer32	read-write	This variable states the number of lines that can be cached
logUserTable	1.3.6.1.4.1.6141.2.62.1.10.4.4		not-accessible	This table states the name of the log users
logUserEntry	1.3.6.1.4.1.6141.2.62.1.10.4.4.1		not-accessible	Each entry of the table states the user name and the display name of the file
I32 logUserIndex	1.3.6.1.4.1.6141.2.62.1.10.4.4.1.1	Integer32	read-only	An incremental integer which uniquely identifies each entry of the table
STR logUserName	1.3.6.1.4.1.6141.2.62.1.10.4.4.1.2	DisplayString	read-only	This variable states the name of the log user
STR displayName	1.3.6.1.4.1.6141.2.62.1.10.4.4.1.3	DisplayString	read-write	This variable states the name which is displayed for each log user
I32 logLevel	1.3.6.1.4.1.6141.2.62.1.10.4.4.1.4	Integer32	read-write	This variable states the level at which the logging needs to be done
agentConfiguration	1.3.6.1.4.1.6141.2.62.1.11
v1v2AuthenticationTables	1.3.6.1.4.1.6141.2.62.1.11.1
aclTable	1.3.6.1.4.1.6141.2.62.1.11.1.1		not-accessible	The table maintains a set of authentication parameters like community and its maximum access. It also has facility for specifying the manager list for access control. This table will be referred by the v1/v2c agent for authentication of any incoming request.
aclEntry	1.3.6.1.4.1.6141.2.62.1.11.1.1.1		not-accessible	Each entry in this table describes one valid authentication property.
STR aclCommunity	1.3.6.1.4.1.6141.2.62.1.11.1.1.1.1	DisplayString	not-accessible	Community string used by the manager to communicate with the agent.
I32 aclAccess	1.3.6.1.4.1.6141.2.62.1.11.1.1.1.2	Integer32	read-create	The maximum access allowed for the corresponding community.
STR aclManagers	1.3.6.1.4.1.6141.2.62.1.11.1.1.1.3	DisplayString	read-create	This variable has the managers list allowed for specified access with specified community. The format of the string is 'managerName1;managerName2.....' with a list of manager IpAddress/name corresponding to each additional information separated via ';' as the delimiter between any two managers. The default value is '0:0:0:0' which states access for all managers for the corresponding community.
ROW aclStatus	1.3.6.1.4.1.6141.2.62.1.11.1.1.1.4	RowStatus	read-create
vaclTable	1.3.6.1.4.1.6141.2.62.1.11.1.2		not-accessible	This table furnishes the View Based Access Control Entries for the SNMP Version 1 and Version 2 Agents (V1/V2C Agents).
vaclEntry	1.3.6.1.4.1.6141.2.62.1.11.1.2.1		not-accessible	Each Entry is based upon the Community and its allowed views for the View Based Access Control.
STR vaclmibViews	1.3.6.1.4.1.6141.2.62.1.11.1.2.1.1	DisplayString	read-create	This column represents the Mib View or Views furnished for the corresponding communities. More Mib Views can be set by giving a ';' as a separator.
ROW vaclviewStatus	1.3.6.1.4.1.6141.2.62.1.11.1.2.1.2	RowStatus	read-create	The Status of the View Set.
ismMib	1.3.6.1.4.1.6141.2.62.1.12
ismNotificationMib	1.3.6.1.4.1.6141.2.62.1.12.1
STR ismExtraPropNames	1.3.6.1.4.1.6141.2.62.1.12.1.1	DisplayString	read-write	The extra properties which the user wants to be sent with the pre-defined notificaiton varbinds. It should be in the following format. SYNTAX: propName1,propName2,... The values for the properties will be in the following format: propName1=value1,propName2=value2...
ismNotiPrefix	1.3.6.1.4.1.6141.2.62.1.12.1.2
ismNotifications	1.3.6.1.4.1.6141.2.62.1.12.1.2.0
NTF ismStateChangeNotification	1.3.6.1.4.1.6141.2.62.1.12.1.2.0.1			The ESM-Agent sends a ismStateChangeNotification to the manager when the state of service created in ISM has changed.
NTF ismNodeChangeNotification	1.3.6.1.4.1.6141.2.62.1.12.1.2.0.2			The ESM-Agent sends a ismNodeChangeNotification to the manager when the config on the node in ISM has changed.
NTF ismNotification	1.3.6.1.4.1.6141.2.62.1.12.1.2.0.3			The ESM-Agent sends a ismNotification to the manager with ISM related information.
NTF ismBadParameterNotification	1.3.6.1.4.1.6141.2.62.1.12.1.2.0.4			The ESM-Agent sends a ismBadParameterNotification to the manager whenever a bad parameter is passed to ISM.
NTF ismConstraintViolationNotification	1.3.6.1.4.1.6141.2.62.1.12.1.2.0.5			The ESM-Agent sends a ismConstraintViolationNotification to the manager whenever constraints are violated within ISM.
NTF ismMisconfigurationDetectedNotification	1.3.6.1.4.1.6141.2.62.1.12.1.2.0.6			The ESM-Agent sends a ismMisconfigurationDetectedNotification to the manager whenever ISM detects a misconfiguratiomn in the network.
NTF ismUnsupportedConfigurationNotification	1.3.6.1.4.1.6141.2.62.1.12.1.2.0.7			The ESM-Agent sends a ismUnsupportedConfigurationNotification to the manager whenever ISM detects a unsupported configuration in the network.
NTF ismInvalidPathSelectionNotification	1.3.6.1.4.1.6141.2.62.1.12.1.2.0.8			The ESM-Agent sends a ismInvalidPathSelectionNotification to the manager whenever ISM detects that an invalid path is selected.
NTF ismModifyNotification	1.3.6.1.4.1.6141.2.62.1.12.1.2.0.9			The ESM-Agent sends a ismModifyNotification to the manager to report the status of modify request sent to ISM
ismNotiVarbinds	1.3.6.1.4.1.6141.2.62.1.12.1.3
STR currentState	1.3.6.1.4.1.6141.2.62.1.12.1.3.1	DisplayString	read-only	This variable indicates the current state of the service.
STR previousState	1.3.6.1.4.1.6141.2.62.1.12.1.3.2	DisplayString	read-only	This variable indicates the previous state of the service.
STR uniqueIdentifier	1.3.6.1.4.1.6141.2.62.1.12.1.3.3	DisplayString	read-only	This variable indicates the unique identifer of the service.
G32 stateChangeTime	1.3.6.1.4.1.6141.2.62.1.12.1.3.4	Gauge32	read-only	This variable represents the time at which the state of the service changed.
STR statsCounters	1.3.6.1.4.1.6141.2.62.1.12.1.3.5	DisplayString	read-only	This variable contains the various stats counter of the service if available.The values will be displayed in the folloing formate propName1=value1,porpName2=vaule2,....
G32 nodeChangeTime	1.3.6.1.4.1.6141.2.62.1.12.1.3.6	Gauge32	read-only	This variable represents the time at which the config on the node has changed.
STR node	1.3.6.1.4.1.6141.2.62.1.12.1.3.7	DisplayString	read-only	This variable indicates the node on which config has changed.
STR ismExtraProperties	1.3.6.1.4.1.6141.2.62.1.12.1.3.8	DisplayString	read-only	The values for the user properties which the user specifies in the moExtraPropNames variable are sent as part of the notifications The values will be displayed in the folloing formate propName1=value1,porpName2=vaule2,....
STR text	1.3.6.1.4.1.6141.2.62.1.12.1.3.9	DisplayString	read-only	This variable gives the descriptive text message of the event.This corresponds to the Text entry in the Event Table in the database
G32 notifTime	1.3.6.1.4.1.6141.2.62.1.12.1.3.10	Gauge32	read-only	This variable represents the time at which the notification was generated
STR status	1.3.6.1.4.1.6141.2.62.1.12.1.3.11	DisplayString	read-only	This variable indicates the status of a request.

RFC description

Manages World Wide Packets ESM (Element Service Manager) including topology, fault, performance, and trap forwarding.

Start monitoring World Wide Packets (Ciena) LEOS Ethernet Switch Modules with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-ESM-MIB

What Is WWP-ESM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description