WWP-LEOS-COMMUNITY-MIB

All MIBs › WWP-LEOS-COMMUNITY-MIB

Organization: World Wide Packets, Inc

Last Updated: 2001-04-03

Category: Ciena LEOS Carrier Ethernet

Description: Manages World Wide Packets LEOS SNMP community string definitions and management access security.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-LEOS-COMMUNITY-MIB?

This is a World Wide Packets (WWP) LEOS private enterprise MIB covering SNMP community-string configuration on WWP's LEOS-based Ethernet transport and access switches (a product line later acquired by Ciena). It exposes management-access configuration data — community name, access mode (read-only/read-write), and any associated access restrictions used to gate SNMP management of the device. It does not report hardware or software runtime health itself, but it directly governs whether an NMS can reach the counters, environmental sensors, and status tables of other LEOS MIBs on the box, so an administrator audits it to ensure monitoring access hasn't been locked out or left over-permissive. It relies on the classic SNMPv1/v2c community-based security model (RFC 3584) rather than SNMPv3 USM, and works alongside the broader family of WWP LEOS MIBs it gates access to. It is typically deployed on WWP LEOS Ethernet demarcation and aggregation switches in carrier Ethernet access networks. Engineers can download the WWP-LEOS-COMMUNITY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-LEOS-COMMUNITY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

World Wide Packets LEOS Ethernet switch

Monitoring Examples

No sample_objects were provided for this module, so no specific table or object names can be cited; based on its description it manages a community-string table (name, access permission, and possibly source-address restriction) that controls SNMP read/write access to the device rather than exposing hardware or performance counters itself.

What Can Be Monitored

configured SNMP community strings
community access mode (read/write)

Imported Objects

From IANA-ADDRESS-FAMILY-NUMBERS-MIB

AddressFamilyNumbers

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

From WWP-SMI

wwpModules	OBJECT-IDENTITY
wwpModulesLeos	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwpLeosCommunityMIB	1.3.6.1.4.1.6141.2.60.22			The MIB module for the WWP Community specific information.
wwpLeosCommunityMIBObjects	1.3.6.1.4.1.6141.2.60.22.1
wwpLeosCommunity	1.3.6.1.4.1.6141.2.60.22.1.1
wwpLeosCommunityTable	1.3.6.1.4.1.6141.2.60.22.1.1.1		not-accessible	Table of read/write Community entries. Multiple Set Operation must be used to create entries in the table. Following objects must be set to valid values to create entry wwpLeosCommunityRights, wwpLeosCommunityStatus. If wwpLeosCommunityName is not set to anything then device will set it to public. If wwpLeosCommunityAddr is not set to anything then device will set it to 0.0.0.0. While deleting entry if this is the last entry with read-only or read-write permission then device will not allow to delete entry.
wwpLeosCommunityEntry	1.3.6.1.4.1.6141.2.60.22.1.1.1.1		not-accessible	An entry for each read/write community. Multiple Set Operation must be used to create entries in the table.
INT wwpLeosCommunityIndex	1.3.6.1.4.1.6141.2.60.22.1.1.1.1.1	INTEGER	read-only	The index used in the table.
STR wwpLeosCommunityName	1.3.6.1.4.1.6141.2.60.22.1.1.1.1.2	DisplayString	read-create	The Name of Community String. This is mandatory object that needs to be set to create entry.
STR wwpLeosCommunityAddr	1.3.6.1.4.1.6141.2.60.22.1.1.1.1.3	DisplayString	read-create	The IP Address of the host(s) or the host name with access rights. A value of 0 means that access is allowed to any host. This is mandatory object that needs to be set to create entry.
IP wwpLeosCommunityResolvedIp	1.3.6.1.4.1.6141.2.60.22.1.1.1.1.4	IpAddress	read-only	This object is set to resolved IP address when wwpLeosCommunityAddr is set to host name. If wwpLeosCommunityAddr is set to ip address then this object will contain same IP as wwpLeosCommunityAddr.
INT wwpLeosCommunityRights	1.3.6.1.4.1.6141.2.60.22.1.1.1.1.5	INTEGER	read-create	Rights associated with the Community Strings. The community Name associated with 'readOnly' community Rights will not have any access (read\write) to the readWrite communities.
ROW wwpLeosCommunityStatus	1.3.6.1.4.1.6141.2.60.22.1.1.1.1.6	RowStatus	read-create	To create a row in this table, a manager must set this object to 'createAndGo'. wwpLeosCommunityRights must be valid prior to creating entry. The Agent should not let all the comunities to be deleted as this will cause isolation of the device. At least one readOnly community and one readWrite community should always be present.
wwpLeosNotifCommunityTable	1.3.6.1.4.1.6141.2.60.22.1.1.2		not-accessible	Table of Notification Community entries. Multiple set operation must be used to create entries in the table.
wwpLeosNotifCommunityEntry	1.3.6.1.4.1.6141.2.60.22.1.1.2.1		not-accessible	An entry for each notification community. Multiple set operation must be used to create entries in the table.
INT wwpLeosNotifIndex	1.3.6.1.4.1.6141.2.60.22.1.1.2.1.1	INTEGER	read-only	The index used in the table.
STR wwpLeosNotifCommunityName	1.3.6.1.4.1.6141.2.60.22.1.1.2.1.2	DisplayString	read-create	The Community String to be used for the notifications. This is mandatory object that needs to be set to create entry.
STR wwpLeosNotifCommunityDestAddr	1.3.6.1.4.1.6141.2.60.22.1.1.2.1.3	DisplayString	read-create	The IP address or host names of the host to which notification is to be sent. This is mandatory object that needs to be set to create entry.
IP wwpLeosNotifCommunityResolvedIpAddr	1.3.6.1.4.1.6141.2.60.22.1.1.2.1.4	IpAddress	read-only	This object is set to resolved IP address of host name if wwpLeosNotifCommunityName is set to hostname. If wwpLeosNotifCommunityName is set to ipv4 then this object will contain same IP as wwpLeosNotifCommunityDestAddr.
ROW wwpLeosNotifCommunityStatus	1.3.6.1.4.1.6141.2.60.22.1.1.2.1.5	RowStatus	read-create	To create a row in this table, a manager must set this object to 'createAndGo'. This table uses
wwpLeosCommunityMIBNotificationPrefix	1.3.6.1.4.1.6141.2.60.22.2
wwpLeosCommunityMIBNotifications	1.3.6.1.4.1.6141.2.60.22.2.0
wwpLeosCommunityMIBConformance	1.3.6.1.4.1.6141.2.60.22.3
wwpLeosCommunityMIBCompliances	1.3.6.1.4.1.6141.2.60.22.3.1
wwpLeosCommunityMIBGroups	1.3.6.1.4.1.6141.2.60.22.3.2

RFC description

Community and SNMP access control settings for World Wide Packets LEOS networking platforms.

Start monitoring World Wide Packets LEOS Ethernet switch (SNMP community-string access-mode config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-LEOS-COMMUNITY-MIB

What Is WWP-LEOS-COMMUNITY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description