WWP-8021X-MIB

All MIBs › WWP-8021X-MIB

Organization: World Wide Packets, Inc

Last Updated: 2005-08-28

Category: World Wide Packets Metro Ethernet

Description: Covers 802.1X port-based network access control on World Wide Packets equipment, including authenticator settings and per-client status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-8021X-MIB?

WWP-8021X-MIB is a World Wide Packets private MIB covering IEEE 802.1X port-based network access control on WWP Ethernet switching equipment, modeling per-port authenticator/supplicant roles alongside the RADIUS infrastructure used to validate credentials. The wwp8021xPortTable, indexed by wwp8021xPort, assigns each switch port a wwp8021xRole of none, supplicant, authenticator, or both, while wwp8021xRadiusClient scalars (wwp8021xRadiusClientTimeout, wwp8021xRadiusClientRetries, wwp8021xRadiusDeadTime) tune RADIUS retry behavior and wwp8021xRadiusServerTable lists candidate RADIUS servers with their IP, auth port, shared key, and RowStatus for provisioning. A companion wwp8021xSupplicantSecTable stores per-port supplicant username/password when the switch itself must authenticate upstream as an 802.1X supplicant. It depends on WWP-SMI for its registration point and only base SNMPv2-SMI/TC/CONF constructs otherwise, and is deployed on World Wide Packets switches enforcing 802.1X access control at the network edge, and administrators can download the WWP-8021X-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-8021X-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

World Wide Packets Ethernet switches

Monitoring Examples

An operator polls wwp8021xRole for each port in wwp8021xPortTable to confirm edge ports are correctly set to authenticator(3), and checks wwp8021xRadiusServerTable to verify the primary RADIUS server entry is active; if wwp8021xRadiusDeadTime keeps getting hit and clients fail to authenticate, it points to the primary RADIUS server being unreachable and requests falling through to a backup server or being denied.

What Can Be Monitored

per-port 802.1X role (authenticator/supplicant/both)
RADIUS client timeout/retry/dead-time configuration
RADIUS server table entries and row status
supplicant username configuration per port

Imported Objects

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

From WWP-SMI

wwpModules

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwp8021xMibModule	1.3.6.1.4.1.6141.2.401			Description.
wwp8021xMIB	1.3.6.1.4.1.6141.2.401.1
wwp8021xConf	1.3.6.1.4.1.6141.2.401.1.1
wwp8021xGroups	1.3.6.1.4.1.6141.2.401.1.1.1
wwp8021xCompls	1.3.6.1.4.1.6141.2.401.1.1.2
wwp8021xObjs	1.3.6.1.4.1.6141.2.401.1.2
wwp8021xPortTable	1.3.6.1.4.1.6141.2.401.1.2.1		not-accessible	Table with an entry for every port on the switch
wwp8021xPortEntry	1.3.6.1.4.1.6141.2.401.1.2.1.1		not-accessible	Description.
INT wwp8021xPort	1.3.6.1.4.1.6141.2.401.1.2.1.1.1	INTEGER	read-only	Switch Ethernet Port
INT wwp8021xRole	1.3.6.1.4.1.6141.2.401.1.2.1.1.2	INTEGER	read-write	802.1x role of the Port.
wwp8021xRadiusClient	1.3.6.1.4.1.6141.2.401.1.2.2
I32 wwp8021xRadiusClientTimeout	1.3.6.1.4.1.6141.2.401.1.2.2.1	Integer32	read-write	This is the time in seconds between retransmissions to the RADIUS server.
I32 wwp8021xRadiusClientRetries	1.3.6.1.4.1.6141.2.401.1.2.2.2	Integer32	read-write	Indicates the number of times the RADIUS server should be tried before giving up on the server.
I32 wwp8021xRadiusDeadTime	1.3.6.1.4.1.6141.2.401.1.2.2.3	Integer32	read-write	Length of time in minutes during which a RADIUS server is skipped over by transaction requests..
wwp8021xRadiusServerTable	1.3.6.1.4.1.6141.2.401.1.2.2.4		not-accessible	Lists the possible RADIUS servers.
wwp8021xRadiusServerEntry	1.3.6.1.4.1.6141.2.401.1.2.2.4.1		not-accessible	Radius server entry.
I32 wwp8021xRadiusServerId	1.3.6.1.4.1.6141.2.401.1.2.2.4.1.1	Integer32	read-only	Index to the Radius Server Entry. The radius Servers are polled according to their ServerIds. If the ServerId 1 doesn't respond, then it tries for the next and hence on.
IP wwp8021xRadiusServerIpAddr	1.3.6.1.4.1.6141.2.401.1.2.2.4.1.2	IpAddress	read-create	IP Address of the RADIUS server.
I32 wwp8021xRadiusServerAuthPort	1.3.6.1.4.1.6141.2.401.1.2.2.4.1.3	Integer32	read-create	The destination UDP port number to which RADIUS messages should be sent. The RADIUS server will not be used for authentication if this port number is 0.
OCT wwp8021xRadiusServerAuthKey	1.3.6.1.4.1.6141.2.401.1.2.2.4.1.4	OCTET STRING	read-create	The Auth Key to be used for Radius Servers. Retrieving the value of this object via SNMP will return an empty string for security reasons
ROW wwp8021xRadiusServerStatus	1.3.6.1.4.1.6141.2.401.1.2.2.4.1.5	RowStatus	read-create	To create a row in this table, a manager must set this object to either createAndGo(4). A row in the WwpRadiusServerEntry can't be set to active until wwpRadiusServerIpAddr has been set to valid value. To disable a Radius server , the operator can set this object to 'notInSerVice' state.
wwp8021xSupplicantSecTable	1.3.6.1.4.1.6141.2.401.1.2.3		not-accessible	Table for Supplicant username and password. Has entry for every port on the switch
wwp8021xSupplicantSecEntry	1.3.6.1.4.1.6141.2.401.1.2.3.1		not-accessible	This contains the username and password entries for each port. Index is wwp8021xPort from Wwp8021xPortEntry
OCT wwp8021xSupplicantSecUserName	1.3.6.1.4.1.6141.2.401.1.2.3.1.1	OCTET STRING	read-create	User name associated with port. This is only applicable if port has role of Supplicant or Both
OCT wwp8021xSupplicantSecPassword	1.3.6.1.4.1.6141.2.401.1.2.3.1.2	OCTET STRING	read-create	Password associated with port. This is only applicable if port has role of Supplicant or Both
wwp8021xEvents	1.3.6.1.4.1.6141.2.401.1.3
wwp8021xEventsV2	1.3.6.1.4.1.6141.2.401.1.3.0

RFC description

Manages World Wide Packets 802.1X port-based network access control authenticator settings and client status.

Start monitoring World Wide Packets Ethernet switches (802.1X port-role/RADIUS-client config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-8021X-MIB

What Is WWP-8021X-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description