APTIS-CONFIG-MIB

All MIBs › APTIS-CONFIG-MIB

Organization: Nortel Networks

Last Updated: 2000-04-14

Category: DSL and Broadband

Description: Nortel Networks Aptis DSL concentrator configuration parameter management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is APTIS-CONFIG-MIB?

APTIS-CONFIG-MIB is a Nortel Networks vendor MIB for the Aptis DSL concentrator, a telecom access platform aggregating multiple DSL subscriber lines. It exposes configuration tables describing the configurable elements of an Aptis chassis, implying coverage of line cards, port settings, and system-level configuration parameters for the concentrator. Administrators use it to monitor the software/configuration status of the Aptis box, confirming line and system settings are applied as expected, which helps catch a misconfigured card or port causing subscriber-line service issues. The module appears self-contained as a Nortel enterprise-specific MIB without an explicit stated dependency on other standard MIBs. It is typically deployed in telecom central office environments managing racks of Nortel Aptis DSL concentrators aggregating residential or business DSL lines. Network engineers evaluating or troubleshooting this functionality can download the APTIS-CONFIG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in APTIS-CONFIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel Networks Aptis DSL concentrator

Monitoring Examples

An administrator would poll the Aptis configuration tables to verify per-card and per-port DSL line settings are correctly provisioned across the concentrator chassis, checking for a card whose configuration diverges from the expected profile. A configuration mismatch on a given line card could explain a cluster of subscriber DSL connectivity complaints tied to that card. No concrete sample object names were provided for this MIB, so specific table/column identifiers cannot be confirmed beyond the general configuration-element description.

What Can Be Monitored

line card configuration
port configuration parameters
system-level configuration settings
configuration consistency across cards

Imported Objects

From APTIS-MIB

Boolean
aptis-config

From APTIS-REG-MIB

aptis-modules

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
aptisConfigModule	1.3.6.1.4.1.2637.1.1.3			The following tables describe the configurable elements of an Aptis box.
metaContainerTable	1.3.6.1.4.1.2637.2.1.1		not-accessible	Meta Language Class.
metaContainerEntry	1.3.6.1.4.1.2637.2.1.1.1		not-accessible	This is the structure of entries in the metaContainerTable.
STR metaContainerPathString	1.3.6.1.4.1.2637.2.1.1.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW metaContainerRowStatus	1.3.6.1.4.1.2637.2.1.1.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT metaContainerKeyValue	1.3.6.1.4.1.2637.2.1.1.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT metaContainerCmlid	1.3.6.1.4.1.2637.2.1.1.1.4	INTEGER	read-create	The CML type identifier of the container.
STR metaContainerCmlname	1.3.6.1.4.1.2637.2.1.1.1.5	DisplayString	read-create	The CML type name of the container. This is the text version that means the same thing as cmlid.
coredumpConfigTable	1.3.6.1.4.1.2637.2.1.13		not-accessible	Configuration for the CVX's coredump facility
coredumpConfigEntry	1.3.6.1.4.1.2637.2.1.13.1		not-accessible	This is the structure of entries in the coredumpConfigTable.
STR coredumpConfigPathString	1.3.6.1.4.1.2637.2.1.13.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW coredumpConfigRowStatus	1.3.6.1.4.1.2637.2.1.13.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT coredumpConfigKeyValue	1.3.6.1.4.1.2637.2.1.13.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
BOO coredumpConfigDumpSCC	1.3.6.1.4.1.2637.2.1.13.1.11	Boolean	read-create	Perform coredumps on SCC crashes (FEP only)
BOO coredumpConfigDumpMAC	1.3.6.1.4.1.2637.2.1.13.1.12	Boolean	read-create	Perform coredumps on MAC crashes, including IOP crashes
BOO coredumpConfigDumpDAC	1.3.6.1.4.1.2637.2.1.13.1.13	Boolean	read-create	Perform coredumps on DAC crashes, including SP crashes
INT coredumpConfigOutputMode	1.3.6.1.4.1.2637.2.1.13.1.14	INTEGER	read-create	Method for storing dumps - overwrite previous or store subsequent
INT coredumpConfigOutputDrive	1.3.6.1.4.1.2637.2.1.13.1.15	INTEGER	read-create	Drive used to store coredumps
eventConfigTable	1.3.6.1.4.1.2637.2.1.14		not-accessible	Configuration for the CVX's Event Log facility
eventConfigEntry	1.3.6.1.4.1.2637.2.1.14.1		not-accessible	This is the structure of entries in the eventConfigTable.
STR eventConfigPathString	1.3.6.1.4.1.2637.2.1.14.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW eventConfigRowStatus	1.3.6.1.4.1.2637.2.1.14.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT eventConfigKeyValue	1.3.6.1.4.1.2637.2.1.14.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT eventConfigDefaultLogLevel	1.3.6.1.4.1.2637.2.1.14.1.11	INTEGER	read-create	Minimum CVX Event Log severity level to store in Run-Time Event Log)
oosTable	1.3.6.1.4.1.2637.2.1.198		not-accessible	Out-Of-Service Class.
oosEntry	1.3.6.1.4.1.2637.2.1.198.1		not-accessible	This is the structure of entries in the oosTable.
STR oosPathString	1.3.6.1.4.1.2637.2.1.198.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW oosRowStatus	1.3.6.1.4.1.2637.2.1.198.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT oosKeyValue	1.3.6.1.4.1.2637.2.1.198.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT oosOosValue	1.3.6.1.4.1.2637.2.1.198.1.11	INTEGER	read-create	Current oos value for this node
slotConfigTable	1.3.6.1.4.1.2637.2.1.202		not-accessible	Configuration of the physical slot cards in the system.
slotConfigEntry	1.3.6.1.4.1.2637.2.1.202.1		not-accessible	This is the structure of entries in the slotConfigTable.
STR slotConfigPathString	1.3.6.1.4.1.2637.2.1.202.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW slotConfigRowStatus	1.3.6.1.4.1.2637.2.1.202.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT slotConfigKeyValue	1.3.6.1.4.1.2637.2.1.202.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT slotConfigAdminServiceModule	1.3.6.1.4.1.2637.2.1.202.1.11	INTEGER	read-create	The configured part number of the Service Module in this slot.
INT slotConfigAdminLineTerminationModule	1.3.6.1.4.1.2637.2.1.202.1.12	INTEGER	read-create	The configured part number of the Line Termination Module in this slot.
sessionConfigTable	1.3.6.1.4.1.2637.2.1.250		not-accessible	Session Configuration Information.
sessionConfigEntry	1.3.6.1.4.1.2637.2.1.250.1		not-accessible	This is the structure of entries in the sessionConfigTable.
STR sessionConfigPathString	1.3.6.1.4.1.2637.2.1.250.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW sessionConfigRowStatus	1.3.6.1.4.1.2637.2.1.250.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT sessionConfigKeyValue	1.3.6.1.4.1.2637.2.1.250.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT sessionConfigDefaultVpopEnable	1.3.6.1.4.1.2637.2.1.250.1.11	INTEGER	read-create	If DefaultVpopEnable is false, and no VPOP has been selected at the completion of call setup, the session will be terminated.
INT sessionConfigPreAuth	1.3.6.1.4.1.2637.2.1.250.1.12	INTEGER	read-create	This variable defines whether called number authentication will be required, and if so, which method of authentication should be used.
STR sessionConfigPreAuthPassword	1.3.6.1.4.1.2637.2.1.250.1.13	DisplayString	read-create	The value to be used for the called number authentication request. This value will be ignored unless radius PreAuth is specified.
INT sessionConfigPreAuthTimeout	1.3.6.1.4.1.2637.2.1.250.1.14	INTEGER	read-create	The maximum number of seconds allowed for called number authentication to complete.
INT sessionConfigPreAuthTimeoutAction	1.3.6.1.4.1.2637.2.1.250.1.15	INTEGER	read-create	The action to take when the pre-auth times out without authentication.
INT sessionConfigCheckpointTime	1.3.6.1.4.1.2637.2.1.250.1.16	INTEGER	read-create	The number of minutes between accounting checkpoint records. 0 disables checkpoint records.
INT sessionConfigTerminateEnable	1.3.6.1.4.1.2637.2.1.250.1.17	INTEGER	read-create	Controls whether or not the session can be terminated by a remote NMS.
STR sessionConfigTerminateSecret	1.3.6.1.4.1.2637.2.1.250.1.18	DisplayString	read-create	Contains the secret string that is used to authenticate the session termination request.
INT sessionConfigLogEnable	1.3.6.1.4.1.2637.2.1.250.1.19	INTEGER	read-create	enables logging of session events on a per session basis.
INT sessionConfigPreAuthAAAGroup	1.3.6.1.4.1.2637.2.1.250.1.20	INTEGER	read-create	The key of the AAA server group to use for authentication
INT sessionConfigDS0DiscTimeOut	1.3.6.1.4.1.2637.2.1.250.1.21	INTEGER	read-create	The number of seconds to wait for the DS0 component on the DAC to respond with a disconnected message before timing out.
INT sessionConfigAcctReportFailedSessions	1.3.6.1.4.1.2637.2.1.250.1.22	INTEGER	read-create	If true, enables accounting stop records for sessions where accounting start was not reported.
sessionTableFormatTable	1.3.6.1.4.1.2637.2.1.251		not-accessible	Session Table Format Information.
sessionTableFormatEntry	1.3.6.1.4.1.2637.2.1.251.1		not-accessible	This is the structure of entries in the sessionTableFormatTable.
STR sessionTableFormatPathString	1.3.6.1.4.1.2637.2.1.251.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW sessionTableFormatRowStatus	1.3.6.1.4.1.2637.2.1.251.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT sessionTableFormatKeyValue	1.3.6.1.4.1.2637.2.1.251.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT sessionTableFormatUseDefault	1.3.6.1.4.1.2637.2.1.251.1.11	INTEGER	read-create	When this variable is set to yes, the default session table will be used, and the table format parameters will be ignored.
STR sessionTableFormatHeading1	1.3.6.1.4.1.2637.2.1.251.1.12	DisplayString	read-create	The text used as the heading for column 1 of the session table.
INT sessionTableFormatWidth1	1.3.6.1.4.1.2637.2.1.251.1.13	INTEGER	read-create	The number of characters in column 1 of the session table.
INT sessionTableFormatParam1	1.3.6.1.4.1.2637.2.1.251.1.14	INTEGER	read-create	The member of the session_status structure to be displayed in column 1 of the session table.
STR sessionTableFormatHeading2	1.3.6.1.4.1.2637.2.1.251.1.15	DisplayString	read-create	The text used as the heading for column 2 of the session table.
INT sessionTableFormatWidth2	1.3.6.1.4.1.2637.2.1.251.1.16	INTEGER	read-create	The number of characters in column 2 of the session table.
INT sessionTableFormatParam2	1.3.6.1.4.1.2637.2.1.251.1.17	INTEGER	read-create	The member of the session_status structure to be displayed in column 2 of the session table.
STR sessionTableFormatHeading3	1.3.6.1.4.1.2637.2.1.251.1.18	DisplayString	read-create	The text used as the heading for column 3 of the session table.
INT sessionTableFormatWidth3	1.3.6.1.4.1.2637.2.1.251.1.19	INTEGER	read-create	The number of characters in column 3 of the session table.
INT sessionTableFormatParam3	1.3.6.1.4.1.2637.2.1.251.1.20	INTEGER	read-create	The member of the session_status structure to be displayed in column 3 of the session table.
STR sessionTableFormatHeading4	1.3.6.1.4.1.2637.2.1.251.1.21	DisplayString	read-create	The text used as the heading for column 4 of the session table.
INT sessionTableFormatWidth4	1.3.6.1.4.1.2637.2.1.251.1.22	INTEGER	read-create	The number of characters in column 4 of the session table.
INT sessionTableFormatParam4	1.3.6.1.4.1.2637.2.1.251.1.23	INTEGER	read-create	The member of the session_status structure to be displayed in column 4 of the session table.
STR sessionTableFormatHeading5	1.3.6.1.4.1.2637.2.1.251.1.24	DisplayString	read-create	The text used as the heading for column 5 of the session table.
INT sessionTableFormatWidth5	1.3.6.1.4.1.2637.2.1.251.1.25	INTEGER	read-create	The number of characters in column 5 of the session table.
INT sessionTableFormatParam5	1.3.6.1.4.1.2637.2.1.251.1.26	INTEGER	read-create	The member of the session_status structure to be displayed in column 5 of the session table.
STR sessionTableFormatHeading6	1.3.6.1.4.1.2637.2.1.251.1.27	DisplayString	read-create	The text used as the heading for column 6 of the session table.
INT sessionTableFormatWidth6	1.3.6.1.4.1.2637.2.1.251.1.28	INTEGER	read-create	The number of characters in column 6 of the session table.
INT sessionTableFormatParam6	1.3.6.1.4.1.2637.2.1.251.1.29	INTEGER	read-create	The member of the session_status structure to be displayed in column 6 of the session table.
STR sessionTableFormatHeading7	1.3.6.1.4.1.2637.2.1.251.1.30	DisplayString	read-create	The text used as the heading for column 7 of the session table.
INT sessionTableFormatWidth7	1.3.6.1.4.1.2637.2.1.251.1.31	INTEGER	read-create	The number of characters in column 7 of the session table.
INT sessionTableFormatParam7	1.3.6.1.4.1.2637.2.1.251.1.32	INTEGER	read-create	The member of the session_status structure to be displayed in column 7 of the session table.
STR sessionTableFormatHeading8	1.3.6.1.4.1.2637.2.1.251.1.33	DisplayString	read-create	The text used as the heading for column 8 of the session table.
INT sessionTableFormatWidth8	1.3.6.1.4.1.2637.2.1.251.1.34	INTEGER	read-create	The number of characters in column 8 of the session table.
INT sessionTableFormatParam8	1.3.6.1.4.1.2637.2.1.251.1.35	INTEGER	read-create	The member of the session_status structure to be displayed in column 8 of the session table.
STR sessionTableFormatHeading9	1.3.6.1.4.1.2637.2.1.251.1.36	DisplayString	read-create	The text used as the heading for column 9 of the session table.
INT sessionTableFormatWidth9	1.3.6.1.4.1.2637.2.1.251.1.37	INTEGER	read-create	The number of characters in column 9 of the session table.
INT sessionTableFormatParam9	1.3.6.1.4.1.2637.2.1.251.1.38	INTEGER	read-create	The member of the session_status structure to be displayed in column 9 of the session table.
STR sessionTableFormatHeading10	1.3.6.1.4.1.2637.2.1.251.1.39	DisplayString	read-create	The text used as the heading for column 10 of the session table.
INT sessionTableFormatWidth10	1.3.6.1.4.1.2637.2.1.251.1.40	INTEGER	read-create	The number of characters in column 10 of the session table.
INT sessionTableFormatParam10	1.3.6.1.4.1.2637.2.1.251.1.41	INTEGER	read-create	The member of the session_status structure to be displayed in column 10 of the session table.
policyConfigTable	1.3.6.1.4.1.2637.2.1.252		not-accessible	Session Policy Configuration Information.
policyConfigEntry	1.3.6.1.4.1.2637.2.1.252.1		not-accessible	This is the structure of entries in the policyConfigTable.
STR policyConfigPathString	1.3.6.1.4.1.2637.2.1.252.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW policyConfigRowStatus	1.3.6.1.4.1.2637.2.1.252.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT policyConfigKeyValue	1.3.6.1.4.1.2637.2.1.252.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT policyConfigModemAllocationPolicy	1.3.6.1.4.1.2637.2.1.252.1.11	INTEGER	read-create	Policy for allocating next modem; Combined Policy is the best choice.
INT policyConfigModemReviveTimeout	1.3.6.1.4.1.2637.2.1.252.1.12	INTEGER	read-create	The time (in minutes) between periodic attempts to download a code image to non-responsive or non-functional modem packages, and to attempt to re-initialize non-responsive modems (0 = never).
INT policyConfigModemFailCount	1.3.6.1.4.1.2637.2.1.252.1.13	INTEGER	read-create	The number of failed connections a modem can have in a sampling period (specified elsewhere) before it will be taken out of service. For example, if this number is set to 8, and the sample count is set to 16, then a modem that fai ls more than 8 out of its last 16 connection attempts will be taken out of service. 0 indicates that the modem will never be taken out of service for this reason.
INT policyConfigModemFailSample	1.3.6.1.4.1.2637.2.1.252.1.14	INTEGER	read-create	The number of connections sampled to determine whether a modem should be taken out of service. If a modem fails more times in this sampling period than allowed, then it is taken out of service. For example, if this number is set to 16, and the fail count is set to 8, then a modem that fails more than 8 out of its last 16 connection attempts will be taken out of service. 0 indicates that the modem will never be taken out of service for this reason.
BOO policyConfigReuseBadModems	1.3.6.1.4.1.2637.2.1.252.1.15	Boolean	read-create	Specifies whether modems taken out of service be re-used in worst case scenarios
BOO policyConfigDoSS7Resourcing	1.3.6.1.4.1.2637.2.1.252.1.16	Boolean	read-create	Specifies whether the system should perform SS7 resource accounting
INT policyConfigDefaultModemRPI	1.3.6.1.4.1.2637.2.1.252.1.17	INTEGER	read-create	Specifies the default RPI that should be assigned to modems when they become operational, and before they take any calls.
INT policyConfigModemSleepTimeout	1.3.6.1.4.1.2637.2.1.252.1.18	INTEGER	read-create	Specifies the amount of time (in minutes) that a modem can be idle before it is placed in sleep (low-power) mode. 0 specifies that modems should never be placed in sleep mode.
INT policyConfigDNISMatchPolicy	1.3.6.1.4.1.2637.2.1.252.1.19	INTEGER	read-create	DS0 allocation policy: use DNIS number to match configured numbers
INT policyConfigDS1AllocationPolicy	1.3.6.1.4.1.2637.2.1.252.1.20	INTEGER	read-create	DS1 allocation policy: Within or without the DNIS number allocation policy
INT policyConfigDS0AllocationPolicy	1.3.6.1.4.1.2637.2.1.252.1.21	INTEGER	read-create	DS0 allocation policy: Within or without the DNIS number allocation policy
INT policyConfigChassisModemThresholdWarning	1.3.6.1.4.1.2637.2.1.252.1.23	INTEGER	read-create	0 to disable; level below total # of modems in CVX that alarm is sent
INT policyConfigSlotModemThresholdWarning	1.3.6.1.4.1.2637.2.1.252.1.24	INTEGER	read-create	0 to disable; level below total # of modems on a MAC that alarm is sent
INT policyConfigActionBacklog	1.3.6.1.4.1.2637.2.1.252.1.25	INTEGER	read-create	Number of old actions to maintain
signalingConfigTable	1.3.6.1.4.1.2637.2.1.253		not-accessible	Session Signalling Configuration Information.
signalingConfigEntry	1.3.6.1.4.1.2637.2.1.253.1		not-accessible	This is the structure of entries in the signalingConfigTable.
STR signalingConfigPathString	1.3.6.1.4.1.2637.2.1.253.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW signalingConfigRowStatus	1.3.6.1.4.1.2637.2.1.253.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT signalingConfigKeyValue	1.3.6.1.4.1.2637.2.1.253.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT signalingConfigSs7Mode	1.3.6.1.4.1.2637.2.1.253.1.11	INTEGER	read-create	This field activates internet thruway support
INT signalingConfigDsmccTimeout	1.3.6.1.4.1.2637.2.1.253.1.12	INTEGER	read-create	The timeout value for User-Network Session Signalling messages
INT signalingConfigDsmccHoldTime	1.3.6.1.4.1.2637.2.1.253.1.13	INTEGER	read-create	The length of time a local copy of Response messages will be retained for retransmission.
INT signalingConfigDsmccRetries	1.3.6.1.4.1.2637.2.1.253.1.14	INTEGER	read-create	The number of resends for any User-to-Network Session Signalling message.
INT signalingConfigConfigPPP	1.3.6.1.4.1.2637.2.1.253.1.15	INTEGER	read-create	Determines if ppp configuration is allowed to be changed by the CVX SS7 network controller as part of the call setup process.
INT signalingConfigDebugMode	1.3.6.1.4.1.2637.2.1.253.1.16	INTEGER	read-create	Enables a mode where every other DS1 is unavailable, and a phantom call is generated for every incoming call on the unavailable DS1. This allows testing to take place by looping each DS1 to the adjacent DS1, and generating call setups using the SNEM or a similar tool.
INT signalingConfigSs7Gateway	1.3.6.1.4.1.2637.2.1.253.1.17	INTEGER	read-create	Specifies the type of signaling gateway is used to interface to the ss7 network.
ipdcConfigTable	1.3.6.1.4.1.2637.2.1.254		not-accessible	IPDC configuration table.
ipdcConfigEntry	1.3.6.1.4.1.2637.2.1.254.1		not-accessible	This is the structure of entries in the ipdcConfigTable.
STR ipdcConfigPathString	1.3.6.1.4.1.2637.2.1.254.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipdcConfigRowStatus	1.3.6.1.4.1.2637.2.1.254.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipdcConfigKeyValue	1.3.6.1.4.1.2637.2.1.254.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipdcConfigPrimarySwitchIpAddr	1.3.6.1.4.1.2637.2.1.254.1.11	IpAddress	read-create	IP address of the primary soft switch.
INT ipdcConfigPrimarySwitchPort	1.3.6.1.4.1.2637.2.1.254.1.12	INTEGER	read-create	TCP port on the primary soft switch.
IP ipdcConfigSecondarySwitchIpAddr	1.3.6.1.4.1.2637.2.1.254.1.13	IpAddress	read-create	IP address of the secondary soft switch.
INT ipdcConfigSecondarySwitchPort	1.3.6.1.4.1.2637.2.1.254.1.14	INTEGER	read-create	TCP port on the secondary soft switch.
STR ipdcConfigBayNumber	1.3.6.1.4.1.2637.2.1.254.1.15	DisplayString	read-create	Bay number (8 bytes, alphanumeric).
STR ipdcConfigSystemType	1.3.6.1.4.1.2637.2.1.254.1.16	DisplayString	read-create	System type.
STR ipdcConfigSystemID	1.3.6.1.4.1.2637.2.1.254.1.17	DisplayString	read-create	Media gateway identifier.
INT ipdcConfigTxTone	1.3.6.1.4.1.2637.2.1.254.1.18	INTEGER	read-create	Specifies the tone frequency generated during continuity test.
INT ipdcConfigRxTone	1.3.6.1.4.1.2637.2.1.254.1.19	INTEGER	read-create	Specifies the tone frequency detected during continuity test.
softswitchConfigTable	1.3.6.1.4.1.2637.2.1.255		not-accessible	Softswitch configuration table.
softswitchConfigEntry	1.3.6.1.4.1.2637.2.1.255.1		not-accessible	This is the structure of entries in the softswitchConfigTable.
STR softswitchConfigPathString	1.3.6.1.4.1.2637.2.1.255.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW softswitchConfigRowStatus	1.3.6.1.4.1.2637.2.1.255.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT softswitchConfigKeyValue	1.3.6.1.4.1.2637.2.1.255.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT softswitchConfigSoftswitchEnable	1.3.6.1.4.1.2637.2.1.255.1.11	INTEGER	read-create	When the simulator is enabled, the CVX will simulate a Soft Switch, and the IPDC client will not operate.
IP softswitchConfigIpAddr	1.3.6.1.4.1.2637.2.1.255.1.12	IpAddress	read-create	IP address of the simulated soft switch.
INT softswitchConfigPort	1.3.6.1.4.1.2637.2.1.255.1.13	INTEGER	read-create	TCP port on the simulated soft switch.
signalingGatewayTable	1.3.6.1.4.1.2637.2.1.511		not-accessible	Configuration of a CVX SS7 Gateway
signalingGatewayEntry	1.3.6.1.4.1.2637.2.1.511.1		not-accessible	This is the structure of entries in the signalingGatewayTable.
STR signalingGatewayPathString	1.3.6.1.4.1.2637.2.1.511.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW signalingGatewayRowStatus	1.3.6.1.4.1.2637.2.1.511.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT signalingGatewayKeyValue	1.3.6.1.4.1.2637.2.1.511.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP signalingGatewayIpAddr	1.3.6.1.4.1.2637.2.1.511.1.13	IpAddress	read-create	IP Address of CVX SS7 Gateway
ipServicesConfigTable	1.3.6.1.4.1.2637.2.1.1002		not-accessible	ip service global configuration
ipServicesConfigEntry	1.3.6.1.4.1.2637.2.1.1002.1		not-accessible	This is the structure of entries in the ipServicesConfigTable.
STR ipServicesConfigPathString	1.3.6.1.4.1.2637.2.1.1002.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipServicesConfigRowStatus	1.3.6.1.4.1.2637.2.1.1002.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipServicesConfigKeyValue	1.3.6.1.4.1.2637.2.1.1002.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipServicesConfigMgmtAddr	1.3.6.1.4.1.2637.2.1.1002.1.11	IpAddress	read-create	home ip address of management functions
INT ipServicesConfigAccessListId	1.3.6.1.4.1.2637.2.1.1002.1.12	INTEGER	read-create	id of access list to apply to service input
INT ipServicesConfigAuthMethod	1.3.6.1.4.1.2637.2.1.1002.1.13	INTEGER	read-create	Authentication method for users of IP services
INT ipServicesConfigDefaultLevel	1.3.6.1.4.1.2637.2.1.1002.1.14	INTEGER	read-create	CLI level for this user (0 for monitor, 1 for admin)
BOO ipServicesConfigDefaultModifyUserEntries	1.3.6.1.4.1.2637.2.1.1002.1.15	Boolean	read-create	User is able to modify CVX's user entries
BOO ipServicesConfigDefaultModifyConfig	1.3.6.1.4.1.2637.2.1.1002.1.16	Boolean	read-create	User is able to modify CVX's configuration
BOO ipServicesConfigDefaultAllowFTP	1.3.6.1.4.1.2637.2.1.1002.1.17	Boolean	read-create	User will be granted FTP access to the CVX
BOO ipServicesConfigDefaultAllowTelnet	1.3.6.1.4.1.2637.2.1.1002.1.18	Boolean	read-create	User will be granted telnet access to the CVX
BOO ipServicesConfigDefaultLevel0DisconnectUsers	1.3.6.1.4.1.2637.2.1.1002.1.19	Boolean	read-create	Level 0 User is able to disconnect remote user sessions
BOO ipServicesConfigUseIPSvcDefaults	1.3.6.1.4.1.2637.2.1.1002.1.20	Boolean	read-create	Use the defaults configured in this section?
BOO ipServicesConfigModifyPasswords	1.3.6.1.4.1.2637.2.1.1002.1.21	Boolean	read-create	User is able to view and modify the CVX's password members
BOO ipServicesConfigDefaultAllowRLogin	1.3.6.1.4.1.2637.2.1.1002.1.22	Boolean	read-create	User will be granted RLogin access to the CVX
BOO ipServicesConfigDefaultAllowRSh	1.3.6.1.4.1.2637.2.1.1002.1.23	Boolean	read-create	User will be granted RSh access to the CVX
ipRtrConfigTable	1.3.6.1.4.1.2637.2.1.1006		not-accessible	System-wide IP router options
ipRtrConfigEntry	1.3.6.1.4.1.2637.2.1.1006.1		not-accessible	This is the structure of entries in the ipRtrConfigTable.
STR ipRtrConfigPathString	1.3.6.1.4.1.2637.2.1.1006.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipRtrConfigRowStatus	1.3.6.1.4.1.2637.2.1.1006.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipRtrConfigKeyValue	1.3.6.1.4.1.2637.2.1.1006.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
BOO ipRtrConfigRoutingEnabled	1.3.6.1.4.1.2637.2.1.1006.1.11	Boolean	read-create	ip routing enabled
BOO ipRtrConfigMulticastEnabled	1.3.6.1.4.1.2637.2.1.1006.1.12	Boolean	read-create	ip multicast enabled
INT ipRtrConfigDefaultTtl	1.3.6.1.4.1.2637.2.1.1006.1.13	INTEGER	read-create	default ip time-to-live (count)
INT ipRtrConfigArpTtl	1.3.6.1.4.1.2637.2.1.1006.1.14	INTEGER	read-create	default arp time-to-live (seconds)
BOO ipRtrConfigSpoofCheckEnabled	1.3.6.1.4.1.2637.2.1.1006.1.15	Boolean	read-create	enable check for spoofed IP addresses
BOO ipRtrConfigChecksumEnabled	1.3.6.1.4.1.2637.2.1.1006.1.17	Boolean	read-create	enable checksum check of routed packets
BOO ipRtrConfigSourceRouteEnabled	1.3.6.1.4.1.2637.2.1.1006.1.18	Boolean	read-create	enable routing of source routed packets
INT ipRtrConfigRouterDiscovery	1.3.6.1.4.1.2637.2.1.1006.1.19	INTEGER	read-create	control for router discovery advertisements
STR ipRtrConfigSnmpSysDesc	1.3.6.1.4.1.2637.2.1.1006.1.110	DisplayString	read-create	snmp system description variable
STR ipRtrConfigSnmpContactName	1.3.6.1.4.1.2637.2.1.1006.1.111	DisplayString	read-create	snmp contact name variable
STR ipRtrConfigSnmpSysName	1.3.6.1.4.1.2637.2.1.1006.1.112	DisplayString	read-create	snmp system name variable
STR ipRtrConfigSnmpSysLocation	1.3.6.1.4.1.2637.2.1.1006.1.113	DisplayString	read-create	snmp system location variable
INT ipRtrConfigSessionUnwindsMax	1.3.6.1.4.1.2637.2.1.1006.1.116	INTEGER	read-create	Maximum number of consecutive IP packets to forward from sessions
INT ipRtrConfigTrunkUnwindsMax	1.3.6.1.4.1.2637.2.1.1006.1.117	INTEGER	read-create	Maximum number of consective IP packets to forward from trunks
BOO ipRtrConfigRouteCacheEnabled	1.3.6.1.4.1.2637.2.1.1006.1.118	Boolean	read-create	use IP route cache to forward datagrams
ipMulticastConfigTable	1.3.6.1.4.1.2637.2.1.1007		not-accessible	system-wide IP multicast router options
ipMulticastConfigEntry	1.3.6.1.4.1.2637.2.1.1007.1		not-accessible	This is the structure of entries in the ipMulticastConfigTable.
STR ipMulticastConfigPathString	1.3.6.1.4.1.2637.2.1.1007.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipMulticastConfigRowStatus	1.3.6.1.4.1.2637.2.1.1007.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipMulticastConfigKeyValue	1.3.6.1.4.1.2637.2.1.1007.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
BOO ipMulticastConfigTrunkRoutingEnabled	1.3.6.1.4.1.2637.2.1.1007.1.11	Boolean	read-create	route ip multicast between trunk interfaces
BOO ipMulticastConfigHeartbeatEnabled	1.3.6.1.4.1.2637.2.1.1007.1.20	Boolean	read-create	ip multicast heartbeat detection enabled
IP ipMulticastConfigHeartbeatGroup	1.3.6.1.4.1.2637.2.1.1007.1.21	IpAddress	read-create	multicast group heartbeat is sent to
INT ipMulticastConfigHeartbeatPort	1.3.6.1.4.1.2637.2.1.1007.1.22	INTEGER	read-create	UDP port heartbeat is sent to
INT ipMulticastConfigHeartbeatTimeout	1.3.6.1.4.1.2637.2.1.1007.1.23	INTEGER	read-create	seconds before heartbeat timeout occurs
IP ipMulticastConfigHeartbeatSource	1.3.6.1.4.1.2637.2.1.1007.1.24	IpAddress	read-create	source address/net of heartbeat packets (0.0.0.0 = any)
IP ipMulticastConfigHeartbeatSourceMask	1.3.6.1.4.1.2637.2.1.1007.1.25	IpAddress	read-create	mask used to match source address/net
INT ipMulticastConfigHeartbeatThreshold	1.3.6.1.4.1.2637.2.1.1007.1.26	INTEGER	read-create	Minimum number of heartbeats expected during the heartbeat period
INT ipMulticastConfigHeartbeatPeriod	1.3.6.1.4.1.2637.2.1.1007.1.27	INTEGER	read-create	Alotted time (seconds) for receiving the heartbeat threshold
ipVrouterConfigTable	1.3.6.1.4.1.2637.2.1.1016		not-accessible	virtual router configuration
ipVrouterConfigEntry	1.3.6.1.4.1.2637.2.1.1016.1		not-accessible	This is the structure of entries in the ipVrouterConfigTable.
STR ipVrouterConfigPathString	1.3.6.1.4.1.2637.2.1.1016.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipVrouterConfigRowStatus	1.3.6.1.4.1.2637.2.1.1016.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipVrouterConfigKeyValue	1.3.6.1.4.1.2637.2.1.1016.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipVrouterConfigRouterType	1.3.6.1.4.1.2637.2.1.1016.1.11	INTEGER	read-create	Virtual router type.
INT ipVrouterConfigTrunkingType	1.3.6.1.4.1.2637.2.1.1016.1.12	INTEGER	read-create	Virtual router trunking type.
ipPolicyEntryTable	1.3.6.1.4.1.2637.2.1.1017		not-accessible	IP Routing Policy Information.
ipPolicyEntryEntry	1.3.6.1.4.1.2637.2.1.1017.1		not-accessible	This is the structure of entries in the ipPolicyEntryTable.
STR ipPolicyEntryPathString	1.3.6.1.4.1.2637.2.1.1017.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipPolicyEntryRowStatus	1.3.6.1.4.1.2637.2.1.1017.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipPolicyEntryKeyValue	1.3.6.1.4.1.2637.2.1.1017.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipPolicyEntryAccessList	1.3.6.1.4.1.2637.2.1.1017.1.11	INTEGER	read-create	id of access-list to match when applying policy
INT ipPolicyEntryForceVrouterId	1.3.6.1.4.1.2637.2.1.1017.1.12	INTEGER	read-create	if access-list matches, use this vrouter to route packet
IP ipPolicyEntryForceDestinationIp	1.3.6.1.4.1.2637.2.1.1017.1.13	IpAddress	read-create	if access-list matches, use this IP addresss as packet destination
ipRipTable	1.3.6.1.4.1.2637.2.1.1030		not-accessible	system-wide RIP configuration
ipRipEntry	1.3.6.1.4.1.2637.2.1.1030.1		not-accessible	This is the structure of entries in the ipRipTable.
STR ipRipPathString	1.3.6.1.4.1.2637.2.1.1030.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipRipRowStatus	1.3.6.1.4.1.2637.2.1.1030.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipRipKeyValue	1.3.6.1.4.1.2637.2.1.1030.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
BOO ipRipProtoV1Enabled	1.3.6.1.4.1.2637.2.1.1030.1.11	Boolean	read-create	accept RIP v1 packets?
BOO ipRipProtoV2Enabled	1.3.6.1.4.1.2637.2.1.1030.1.12	Boolean	read-create	accept RIP v2 packets? (v1compat = v1 + v2)
BOO ipRipTriggeredUpdatesEnabled	1.3.6.1.4.1.2637.2.1.1030.1.13	Boolean	read-create	send out updates immediately when changes occur
INT ipRipAuthType	1.3.6.1.4.1.2637.2.1.1030.1.14	INTEGER	read-create	for RIP V2, the authentication type
STR ipRipAuthKey	1.3.6.1.4.1.2637.2.1.1030.1.15	DisplayString	read-create	for RIP V2, the authentication string
ipRipTrustedTable	1.3.6.1.4.1.2637.2.1.1031		not-accessible	RIP trusted-host entry; one per trusted-host
ipRipTrustedEntry	1.3.6.1.4.1.2637.2.1.1031.1		not-accessible	This is the structure of entries in the ipRipTrustedTable.
STR ipRipTrustedPathString	1.3.6.1.4.1.2637.2.1.1031.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipRipTrustedRowStatus	1.3.6.1.4.1.2637.2.1.1031.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipRipTrustedKeyValue	1.3.6.1.4.1.2637.2.1.1031.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipRipTrustedTrustedHost	1.3.6.1.4.1.2637.2.1.1031.1.11	IpAddress	read-create	IP address of valid rip source
ipOspfTable	1.3.6.1.4.1.2637.2.1.1040		not-accessible	OSPF global configuration
ipOspfEntry	1.3.6.1.4.1.2637.2.1.1040.1		not-accessible	This is the structure of entries in the ipOspfTable.
STR ipOspfPathString	1.3.6.1.4.1.2637.2.1.1040.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipOspfRowStatus	1.3.6.1.4.1.2637.2.1.1040.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipOspfKeyValue	1.3.6.1.4.1.2637.2.1.1040.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipOspfRouterId	1.3.6.1.4.1.2637.2.1.1040.1.11	IpAddress	read-create	ID of router; often the IP address of the primary ethernet
BOO ipOspfAutoVirtualLinkEnabled	1.3.6.1.4.1.2637.2.1.1040.1.12	Boolean	read-create	enable automatic creation virtual links?
BOO ipOspfTosEnabled	1.3.6.1.4.1.2637.2.1.1040.1.13	Boolean	read-create	enable multiple paths based on Type-of-service
BOO ipOspfAsBorderEnabled	1.3.6.1.4.1.2637.2.1.1040.1.14	Boolean	read-create	enable router to be an ASBR router?
INT ipOspfMaxPaths	1.3.6.1.4.1.2637.2.1.1040.1.15	INTEGER	read-create	max # of multiple paths saved for each route
INT ipOspfSpfDelayBeforeRecalc	1.3.6.1.4.1.2637.2.1.1040.1.16	INTEGER	read-create	delay time before SPF recalculation
INT ipOspfSpfHoldtimeMinBetweenRecalc	1.3.6.1.4.1.2637.2.1.1040.1.17	INTEGER	read-create	minimum hold time between SPF recalcuation
BOO ipOspfGenerateDefaultEnabled	1.3.6.1.4.1.2637.2.1.1040.1.18	Boolean	read-create	enable generation of default routes
BOO ipOspfGenerateDefaultMetric	1.3.6.1.4.1.2637.2.1.1040.1.19	Boolean	read-create	enable generation of default metrics
BOO ipOspfGenerateDefaultMetricType	1.3.6.1.4.1.2637.2.1.1040.1.20	Boolean	read-create	enable generation of default metric type
INT ipOspfStrategy	1.3.6.1.4.1.2637.2.1.1040.1.21	INTEGER	read-create	strategy when multiple next-hops exists
ipOspfAreaTable	1.3.6.1.4.1.2637.2.1.1041		not-accessible	OSPF area entry configuration
ipOspfAreaEntry	1.3.6.1.4.1.2637.2.1.1041.1		not-accessible	This is the structure of entries in the ipOspfAreaTable.
STR ipOspfAreaPathString	1.3.6.1.4.1.2637.2.1.1041.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipOspfAreaRowStatus	1.3.6.1.4.1.2637.2.1.1041.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipOspfAreaKeyValue	1.3.6.1.4.1.2637.2.1.1041.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipOspfAreaAreaId	1.3.6.1.4.1.2637.2.1.1041.1.11	IpAddress	read-create	OSPF area ID IP Address.
BOO ipOspfAreaStubAreaEnabled	1.3.6.1.4.1.2637.2.1.1041.1.12	Boolean	read-create	defines area as a stub area
BOO ipOspfAreaNotSoStubbyAreaEnabled	1.3.6.1.4.1.2637.2.1.1041.1.13	Boolean	read-create	defines area as a not-so-stubby-area
INT ipOspfAreaStubAreaDefaultCost	1.3.6.1.4.1.2637.2.1.1041.1.14	INTEGER	read-create	OSPF stub area default cost.
BOO ipOspfAreaStubAreaNoSummaryEnabled	1.3.6.1.4.1.2637.2.1.1041.1.15	Boolean	read-create	OSPF stub area summary enabled?
ipOspfVirtualLinkTable	1.3.6.1.4.1.2637.2.1.1042		not-accessible	OSPF virtual link entry configuration
ipOspfVirtualLinkEntry	1.3.6.1.4.1.2637.2.1.1042.1		not-accessible	This is the structure of entries in the ipOspfVirtualLinkTable.
STR ipOspfVirtualLinkPathString	1.3.6.1.4.1.2637.2.1.1042.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipOspfVirtualLinkRowStatus	1.3.6.1.4.1.2637.2.1.1042.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipOspfVirtualLinkKeyValue	1.3.6.1.4.1.2637.2.1.1042.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipOspfVirtualLinkAreaId	1.3.6.1.4.1.2637.2.1.1042.1.11	IpAddress	read-create	OSPF VL area IP Address.
IP ipOspfVirtualLinkRouterId	1.3.6.1.4.1.2637.2.1.1042.1.12	IpAddress	read-create	OSPF VL router IP Address.
IP ipOspfVirtualLinkIpAddress	1.3.6.1.4.1.2637.2.1.1042.1.13	IpAddress	read-create	OSPF VL IP Address.
IP ipOspfVirtualLinkNextRouteripAddress	1.3.6.1.4.1.2637.2.1.1042.1.14	IpAddress	read-create	OSPF VL next router IP Address.
IP ipOspfVirtualLinkTransitAreaId	1.3.6.1.4.1.2637.2.1.1042.1.15	IpAddress	read-create	OSPF VL transit area IP Address.
INT ipOspfVirtualLinkHelloInterval	1.3.6.1.4.1.2637.2.1.1042.1.16	INTEGER	read-create	OSPF VL hello message interval.
INT ipOspfVirtualLinkDeadInterval	1.3.6.1.4.1.2637.2.1.1042.1.17	INTEGER	read-create	OSPF VL dead interval.
INT ipOspfVirtualLinkRetransmitInterval	1.3.6.1.4.1.2637.2.1.1042.1.18	INTEGER	read-create	OSPF VL retransmit interval.
INT ipOspfVirtualLinkTransmitDelay	1.3.6.1.4.1.2637.2.1.1042.1.19	INTEGER	read-create	OSPF VL transmit delay.
INT ipOspfVirtualLinkAuthType	1.3.6.1.4.1.2637.2.1.1042.1.20	INTEGER	read-create	OSPF VL authorization type.
STR ipOspfVirtualLinkAuthKey	1.3.6.1.4.1.2637.2.1.1042.1.21	DisplayString	read-create	OSPF VL authorization key.
ipOspfMd5KeyTable	1.3.6.1.4.1.2637.2.1.1044		not-accessible	OSPF MD-5 key configuration
ipOspfMd5KeyEntry	1.3.6.1.4.1.2637.2.1.1044.1		not-accessible	This is the structure of entries in the ipOspfMd5KeyTable.
STR ipOspfMd5KeyPathString	1.3.6.1.4.1.2637.2.1.1044.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipOspfMd5KeyRowStatus	1.3.6.1.4.1.2637.2.1.1044.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipOspfMd5KeyKeyValue	1.3.6.1.4.1.2637.2.1.1044.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipOspfMd5KeyIfIndex	1.3.6.1.4.1.2637.2.1.1044.1.11	INTEGER	read-create	ifIndex of interface key is applied to
IP ipOspfMd5KeyAreaId	1.3.6.1.4.1.2637.2.1.1044.1.12	IpAddress	read-create	area id (unused)
INT ipOspfMd5KeyMd5KeyId	1.3.6.1.4.1.2637.2.1.1044.1.13	INTEGER	read-create	MD5 key id [1..n]
STR ipOspfMd5KeyMd5Key	1.3.6.1.4.1.2637.2.1.1044.1.14	DisplayString	read-create	MD5 key in ASCII
ipOspfRangeTable	1.3.6.1.4.1.2637.2.1.1045		not-accessible	Adds an address range to an OSPF area
ipOspfRangeEntry	1.3.6.1.4.1.2637.2.1.1045.1		not-accessible	This is the structure of entries in the ipOspfRangeTable.
STR ipOspfRangePathString	1.3.6.1.4.1.2637.2.1.1045.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipOspfRangeRowStatus	1.3.6.1.4.1.2637.2.1.1045.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipOspfRangeKeyValue	1.3.6.1.4.1.2637.2.1.1045.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipOspfRangeAddress	1.3.6.1.4.1.2637.2.1.1045.1.11	IpAddress	read-create	ip address
IP ipOspfRangeMask	1.3.6.1.4.1.2637.2.1.1045.1.12	IpAddress	read-create	ip mask
IP ipOspfRangeAreaId	1.3.6.1.4.1.2637.2.1.1045.1.13	IpAddress	read-create	area id
BOO ipOspfRangeAdvertise	1.3.6.1.4.1.2637.2.1.1045.1.14	Boolean	read-create	advertise
INT ipOspfRangeType	1.3.6.1.4.1.2637.2.1.1045.1.15	INTEGER	read-create	type
ipVpnGroupDestTable	1.3.6.1.4.1.2637.2.1.1060		not-accessible	VPN group entry configuration
ipVpnGroupDestEntry	1.3.6.1.4.1.2637.2.1.1060.1		not-accessible	This is the structure of entries in the ipVpnGroupDestTable.
STR ipVpnGroupDestPathString	1.3.6.1.4.1.2637.2.1.1060.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipVpnGroupDestRowStatus	1.3.6.1.4.1.2637.2.1.1060.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipVpnGroupDestKeyValue	1.3.6.1.4.1.2637.2.1.1060.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipVpnGroupDestVpnId	1.3.6.1.4.1.2637.2.1.1060.1.11	INTEGER	read-create	VPN group number
INT ipVpnGroupDestDlci	1.3.6.1.4.1.2637.2.1.1060.1.12	INTEGER	read-create	destination FR DLCI
IP ipVpnGroupDestIpPrefix	1.3.6.1.4.1.2637.2.1.1060.1.13	IpAddress	read-create	destination IP net prefix
IP ipVpnGroupDestIpMask	1.3.6.1.4.1.2637.2.1.1060.1.14	IpAddress	read-create	destination IP net mask
ipVpnGroupTable	1.3.6.1.4.1.2637.2.1.1061		not-accessible	VPN to FR/IP mapping entry
ipVpnGroupEntry	1.3.6.1.4.1.2637.2.1.1061.1		not-accessible	This is the structure of entries in the ipVpnGroupTable.
STR ipVpnGroupPathString	1.3.6.1.4.1.2637.2.1.1061.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipVpnGroupRowStatus	1.3.6.1.4.1.2637.2.1.1061.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipVpnGroupKeyValue	1.3.6.1.4.1.2637.2.1.1061.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipVpnGroupType	1.3.6.1.4.1.2637.2.1.1061.1.11	INTEGER	read-create	VPN group type.
INT ipVpnGroupVpnId	1.3.6.1.4.1.2637.2.1.1061.1.12	INTEGER	read-create	VPN number.
INT ipVpnGroupFrDlciMapCount	1.3.6.1.4.1.2637.2.1.1061.1.13	INTEGER	read-create	VPN FR Data Link Connection Id map count.
IP ipVpnGroupFrDlciMap1	1.3.6.1.4.1.2637.2.1.1061.1.14	IpAddress	read-create	VPN FR DLCI map IP Address #1.
IP ipVpnGroupFrDlciMap2	1.3.6.1.4.1.2637.2.1.1061.1.15	IpAddress	read-create	VPN FR DLCI map IP Address #2.
IP ipVpnGroupFrDlciMap3	1.3.6.1.4.1.2637.2.1.1061.1.16	IpAddress	read-create	VPN FR DLCI map IP Address #3.
IP ipVpnGroupFrDlciMap4	1.3.6.1.4.1.2637.2.1.1061.1.17	IpAddress	read-create	VPN FR DLCI map IP Address #4.
IP ipVpnGroupFrDlciMap5	1.3.6.1.4.1.2637.2.1.1061.1.18	IpAddress	read-create	VPN FR DLCI map IP Address #5.
ipAccessListTable	1.3.6.1.4.1.2637.2.1.1065		not-accessible	ip access list filter entry; defines part of IP filter
ipAccessListEntry	1.3.6.1.4.1.2637.2.1.1065.1		not-accessible	This is the structure of entries in the ipAccessListTable.
STR ipAccessListPathString	1.3.6.1.4.1.2637.2.1.1065.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipAccessListRowStatus	1.3.6.1.4.1.2637.2.1.1065.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipAccessListKeyValue	1.3.6.1.4.1.2637.2.1.1065.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipAccessListId	1.3.6.1.4.1.2637.2.1.1065.1.11	INTEGER	read-create	id number to which this filter entry applies
INT ipAccessListMode	1.3.6.1.4.1.2637.2.1.1065.1.12	INTEGER	read-create	set to drop or pass packet if entry matches
INT ipAccessListProtocol	1.3.6.1.4.1.2637.2.1.1065.1.13	INTEGER	read-create	IP protocol field to match
IP ipAccessListSourceIp	1.3.6.1.4.1.2637.2.1.1065.1.20	IpAddress	read-create	source IP address prefix to match
IP ipAccessListSourceMask	1.3.6.1.4.1.2637.2.1.1065.1.21	IpAddress	read-create	mask applied to source IP address before matching
IP ipAccessListDestinationIp	1.3.6.1.4.1.2637.2.1.1065.1.22	IpAddress	read-create	destination IP address prefix to match
IP ipAccessListDestinationMask	1.3.6.1.4.1.2637.2.1.1065.1.23	IpAddress	read-create	mask applied to destination IP address before matching
INT ipAccessListCompare	1.3.6.1.4.1.2637.2.1.1065.1.30	INTEGER	read-create	method of comparison for destination UDP/TCP port
INT ipAccessListDestinationPort	1.3.6.1.4.1.2637.2.1.1065.1.31	INTEGER	read-create	if protocol is UDP or TCP, the port number to compare against
INT ipAccessListIcmpType	1.3.6.1.4.1.2637.2.1.1065.1.32	INTEGER	read-create	if protocol is ICMP, the ICMP type to compare against
INT ipAccessListIcmpCode	1.3.6.1.4.1.2637.2.1.1065.1.33	INTEGER	read-create	if protocol is ICMP, the ICMP code to compare against
INT ipAccessListIgmpType	1.3.6.1.4.1.2637.2.1.1065.1.34	INTEGER	read-create	if protocol is IGMP, the IGMP type to compare against
INT ipAccessListTcpFlag	1.3.6.1.4.1.2637.2.1.1065.1.35	INTEGER	read-create	if protocol is TCP, the TCP flags to compare against
ipFilterListTable	1.3.6.1.4.1.2637.2.1.1066		not-accessible	ip filter list configuration
ipFilterListEntry	1.3.6.1.4.1.2637.2.1.1066.1		not-accessible	This is the structure of entries in the ipFilterListTable.
STR ipFilterListPathString	1.3.6.1.4.1.2637.2.1.1066.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipFilterListRowStatus	1.3.6.1.4.1.2637.2.1.1066.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipFilterListKeyValue	1.3.6.1.4.1.2637.2.1.1066.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
OCT ipFilterListName	1.3.6.1.4.1.2637.2.1.1066.1.11	OCTET STRING	read-create	Corresponds to the Filter-Id string optionally supplied by a RADIUS server in an Access-Accept packet at user authentication time.
INT ipFilterListInputAccessListId	1.3.6.1.4.1.2637.2.1.1066.1.12	INTEGER	read-create	id of an IP access list for use in the inbound direction
INT ipFilterListOutputAccessListId	1.3.6.1.4.1.2637.2.1.1066.1.13	INTEGER	read-create	id of an IP access list for use in the outbound direction
ipIfnumberTable	1.3.6.1.4.1.2637.2.1.1072		not-accessible	per-interface configuration
ipIfnumberEntry	1.3.6.1.4.1.2637.2.1.1072.1		not-accessible	This is the structure of entries in the ipIfnumberTable.
STR ipIfnumberPathString	1.3.6.1.4.1.2637.2.1.1072.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipIfnumberRowStatus	1.3.6.1.4.1.2637.2.1.1072.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipIfnumberKeyValue	1.3.6.1.4.1.2637.2.1.1072.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipIfnumberIfIndex	1.3.6.1.4.1.2637.2.1.1072.1.12	INTEGER	read-create	ifIndex
INT ipIfnumberClass	1.3.6.1.4.1.2637.2.1.1072.1.13	INTEGER	read-create	driver class to bind to
INT ipIfnumberSubclass	1.3.6.1.4.1.2637.2.1.1072.1.14	INTEGER	read-create	driver subclass to bind to
INT ipIfnumberInstance	1.3.6.1.4.1.2637.2.1.1072.1.15	INTEGER	read-create	driver instance to bind to
ipCircuitTable	1.3.6.1.4.1.2637.2.1.1073		not-accessible	ip router circuit configuration
ipCircuitEntry	1.3.6.1.4.1.2637.2.1.1073.1		not-accessible	This is the structure of entries in the ipCircuitTable.
STR ipCircuitPathString	1.3.6.1.4.1.2637.2.1.1073.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipCircuitRowStatus	1.3.6.1.4.1.2637.2.1.1073.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipCircuitKeyValue	1.3.6.1.4.1.2637.2.1.1073.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipCircuitType	1.3.6.1.4.1.2637.2.1.1073.1.11	INTEGER	read-create	circuit type
INT ipCircuitIfIndex	1.3.6.1.4.1.2637.2.1.1073.1.12	INTEGER	read-create	ifIndex
OCT ipCircuitDescription	1.3.6.1.4.1.2637.2.1.1073.1.16	OCTET STRING	read-create	interface description string
INT ipCircuitMtu	1.3.6.1.4.1.2637.2.1.1073.1.17	INTEGER	read-create	max transmission size
INT ipCircuitSpeed	1.3.6.1.4.1.2637.2.1.1073.1.18	INTEGER	read-create	bits per second
BOO ipCircuitNumbered	1.3.6.1.4.1.2637.2.1.1073.1.19	Boolean	read-create	is interface numbered?
IP ipCircuitIpLocal	1.3.6.1.4.1.2637.2.1.1073.1.20	IpAddress	read-create	assigned address of interface (local side)
IP ipCircuitIpRemote	1.3.6.1.4.1.2637.2.1.1073.1.21	IpAddress	read-create	assigned address of remote side (if p-to-p link)
IP ipCircuitIpMask	1.3.6.1.4.1.2637.2.1.1073.1.22	IpAddress	read-create	address mask of interface
BOO ipCircuitArpResponseEnabled	1.3.6.1.4.1.2637.2.1.1073.1.23	Boolean	read-create	arp enabled ?
BOO ipCircuitArpProxyEnabled	1.3.6.1.4.1.2637.2.1.1073.1.24	Boolean	read-create	respond with proxy arp for subnets on other interfaces?
BOO ipCircuitAdvertiseRoute	1.3.6.1.4.1.2637.2.1.1073.1.25	Boolean	read-create	advertise route to circuit's network
INT ipCircuitOutputQueueMaxDepth	1.3.6.1.4.1.2637.2.1.1073.1.26	INTEGER	read-create	max # of packets on output queue
INT ipCircuitOutputEnqueueStyle	1.3.6.1.4.1.2637.2.1.1073.1.27	INTEGER	read-create	style of output queue enqueing
INT ipCircuitOutputDequeueStyle	1.3.6.1.4.1.2637.2.1.1073.1.28	INTEGER	read-create	style of output queue dequeueing
BOO ipCircuitRipV1Enabled	1.3.6.1.4.1.2637.2.1.1073.1.30	Boolean	read-create	enable rip v1 on interface?
BOO ipCircuitRipV2Enabled	1.3.6.1.4.1.2637.2.1.1073.1.31	Boolean	read-create	enable rip v2 on interface? (v1compat = v1 + v2)
BOO ipCircuitRipSendEnabled	1.3.6.1.4.1.2637.2.1.1073.1.32	Boolean	read-create	send rip out interface?
BOO ipCircuitRipRecvEnabled	1.3.6.1.4.1.2637.2.1.1073.1.33	Boolean	read-create	accept rip on interface?
BOO ipCircuitRipPoisonReverseEnabled	1.3.6.1.4.1.2637.2.1.1073.1.34	Boolean	read-create	poison reverse enabled?
INT ipCircuitRipInflateMetric	1.3.6.1.4.1.2637.2.1.1073.1.35	INTEGER	read-create	inflate RIP metric by this amount
INT ipCircuitRipSendAccessListId	1.3.6.1.4.1.2637.2.1.1073.1.36	INTEGER	read-create	access list applied to RIP packets sent
BOO ipCircuitOspfEnabled	1.3.6.1.4.1.2637.2.1.1073.1.40	Boolean	read-create	ospf enabled in interface?
IP ipCircuitOspfAreaId	1.3.6.1.4.1.2637.2.1.1073.1.41	IpAddress	read-create	OSPF area id.
INT ipCircuitOspfCost	1.3.6.1.4.1.2637.2.1.1073.1.42	INTEGER	read-create	OSPF cost.
INT ipCircuitOspfPriority	1.3.6.1.4.1.2637.2.1.1073.1.43	INTEGER	read-create	OSPF priority.
INT ipCircuitOspfHelloInterval	1.3.6.1.4.1.2637.2.1.1073.1.44	INTEGER	read-create	OSPF hello interval.
INT ipCircuitOspfDeadInterval	1.3.6.1.4.1.2637.2.1.1073.1.45	INTEGER	read-create	OSPF dead interval.
INT ipCircuitOspfRetransmitInterval	1.3.6.1.4.1.2637.2.1.1073.1.46	INTEGER	read-create	OSPF retransmit interval.
INT ipCircuitOspfTransmitDelay	1.3.6.1.4.1.2637.2.1.1073.1.47	INTEGER	read-create	OSPF transmit delay.
INT ipCircuitOspfPollInterval	1.3.6.1.4.1.2637.2.1.1073.1.48	INTEGER	read-create	OSPF polling interval.
INT ipCircuitOspfAuthType	1.3.6.1.4.1.2637.2.1.1073.1.49	INTEGER	read-create	OSPF authorization type.
STR ipCircuitOspfAuthKey	1.3.6.1.4.1.2637.2.1.1073.1.50	DisplayString	read-create	simple clear text password
BOO ipCircuitMulticastEnabled	1.3.6.1.4.1.2637.2.1.1073.1.60	Boolean	read-create	multicast enabled on interface?
INT ipCircuitMulticastProtocol	1.3.6.1.4.1.2637.2.1.1073.1.61	INTEGER	read-create	multicast protocol used on this interface
BOO ipCircuitInverseArpEnabled	1.3.6.1.4.1.2637.2.1.1073.1.62	Boolean	read-create	Use Inverse ARP if the interface subclass is Frame Relay.
BOO ipCircuitGratuitousArpEnabled	1.3.6.1.4.1.2637.2.1.1073.1.63	Boolean	read-create	Send gratuitous arp on this interface.
ipRouteTable	1.3.6.1.4.1.2637.2.1.1074		not-accessible	ip route configuration; one per route entry
ipRouteEntry	1.3.6.1.4.1.2637.2.1.1074.1		not-accessible	This is the structure of entries in the ipRouteTable.
STR ipRoutePathString	1.3.6.1.4.1.2637.2.1.1074.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipRouteRowStatus	1.3.6.1.4.1.2637.2.1.1074.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipRouteKeyValue	1.3.6.1.4.1.2637.2.1.1074.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipRoutePrefix	1.3.6.1.4.1.2637.2.1.1074.1.11	IpAddress	read-create	ip route destination prefix
IP ipRouteMask	1.3.6.1.4.1.2637.2.1.1074.1.12	IpAddress	read-create	ip route destination mask
IP ipRouteLocalGateway	1.3.6.1.4.1.2637.2.1.1074.1.13	IpAddress	read-create	if != 0, ip of local gateway
INT ipRouteLocalIfIndex	1.3.6.1.4.1.2637.2.1.1074.1.14	INTEGER	read-create	or ifIndex if ip_local_gateway == 0
BOO ipRouteDefaultFlag	1.3.6.1.4.1.2637.2.1.1074.1.15	Boolean	read-create	use as default route (ip=0/mask=0) ?
BOO ipRoutePrivateFlag	1.3.6.1.4.1.2637.2.1.1074.1.16	Boolean	read-create	don't advertise via rip/ospf if true
INT ipRouteRipCost	1.3.6.1.4.1.2637.2.1.1074.1.17	INTEGER	read-create	advertised rip metric
INT ipRoutePreference	1.3.6.1.4.1.2637.2.1.1074.1.18	INTEGER	read-create	route preference; high means prefer over learned routes
INT ipRouteStrategy	1.3.6.1.4.1.2637.2.1.1074.1.19	INTEGER	read-create	strategy when multiple next-hops exists
ipArpTable	1.3.6.1.4.1.2637.2.1.1075		not-accessible	ip arp configuration; one per arp entry
ipArpEntry	1.3.6.1.4.1.2637.2.1.1075.1		not-accessible	This is the structure of entries in the ipArpTable.
STR ipArpPathString	1.3.6.1.4.1.2637.2.1.1075.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipArpRowStatus	1.3.6.1.4.1.2637.2.1.1075.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipArpKeyValue	1.3.6.1.4.1.2637.2.1.1075.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipArpIfIndex	1.3.6.1.4.1.2637.2.1.1075.1.11	INTEGER	read-create	interface to advertise on
IP ipArpIpDestination	1.3.6.1.4.1.2637.2.1.1075.1.12	IpAddress	read-create	ip address
STR ipArpPhysDest	1.3.6.1.4.1.2637.2.1.1075.1.13	DisplayString	read-create	mac (hardware) address
BOO ipArpPublishFlag	1.3.6.1.4.1.2637.2.1.1075.1.14	Boolean	read-create	answer arp queries for this entry?
ipOspfNbNeighborTable	1.3.6.1.4.1.2637.2.1.1076		not-accessible	OSPF non-broadcast neighbor entry configuration
ipOspfNbNeighborEntry	1.3.6.1.4.1.2637.2.1.1076.1		not-accessible	This is the structure of entries in the ipOspfNbNeighborTable.
STR ipOspfNbNeighborPathString	1.3.6.1.4.1.2637.2.1.1076.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipOspfNbNeighborRowStatus	1.3.6.1.4.1.2637.2.1.1076.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipOspfNbNeighborKeyValue	1.3.6.1.4.1.2637.2.1.1076.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipOspfNbNeighborIfIndex	1.3.6.1.4.1.2637.2.1.1076.1.11	INTEGER	read-create	interface neighbor can be reached via
IP ipOspfNbNeighborIpAddress	1.3.6.1.4.1.2637.2.1.1076.1.12	IpAddress	read-create	neighbor's IP address
BOO ipOspfNbNeighborDrEligibleEnabled	1.3.6.1.4.1.2637.2.1.1076.1.13	Boolean	read-create	neighbor is eligible to be DR
ipFrMapTable	1.3.6.1.4.1.2637.2.1.1077		not-accessible	Frame Relay static ip/dlci mapping configuration
ipFrMapEntry	1.3.6.1.4.1.2637.2.1.1077.1		not-accessible	This is the structure of entries in the ipFrMapTable.
STR ipFrMapPathString	1.3.6.1.4.1.2637.2.1.1077.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipFrMapRowStatus	1.3.6.1.4.1.2637.2.1.1077.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipFrMapKeyValue	1.3.6.1.4.1.2637.2.1.1077.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipFrMapIfIndex	1.3.6.1.4.1.2637.2.1.1077.1.11	INTEGER	read-create	ifIndex
IP ipFrMapIpDestination	1.3.6.1.4.1.2637.2.1.1077.1.12	IpAddress	read-create	ip address
INT ipFrMapDlci	1.3.6.1.4.1.2637.2.1.1077.1.13	INTEGER	read-create	data link connection id
BOO ipFrMapInterfaceFlag	1.3.6.1.4.1.2637.2.1.1077.1.14	Boolean	read-create	use this dlci for interface?
BOO ipFrMapBroadcastFlag	1.3.6.1.4.1.2637.2.1.1077.1.15	Boolean	read-create	use this dlci for broadcast?
BOO ipFrMapMulticastFlag	1.3.6.1.4.1.2637.2.1.1077.1.16	Boolean	read-create	use this dlci for multicast?
ipAccessGroupTable	1.3.6.1.4.1.2637.2.1.1078		not-accessible	ip access group configuration
ipAccessGroupEntry	1.3.6.1.4.1.2637.2.1.1078.1		not-accessible	This is the structure of entries in the ipAccessGroupTable.
STR ipAccessGroupPathString	1.3.6.1.4.1.2637.2.1.1078.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipAccessGroupRowStatus	1.3.6.1.4.1.2637.2.1.1078.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipAccessGroupKeyValue	1.3.6.1.4.1.2637.2.1.1078.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipAccessGroupIfIndex	1.3.6.1.4.1.2637.2.1.1078.1.11	INTEGER	read-create	interface this access group applies to
INT ipAccessGroupAccessListId	1.3.6.1.4.1.2637.2.1.1078.1.12	INTEGER	read-create	id of access list to apply to interface
INT ipAccessGroupDirection	1.3.6.1.4.1.2637.2.1.1078.1.13	INTEGER	read-create	direction of packets to match against access list
ipSvcEntryTable	1.3.6.1.4.1.2637.2.1.1101		not-accessible	configuration for a single ip background service
ipSvcEntryEntry	1.3.6.1.4.1.2637.2.1.1101.1		not-accessible	This is the structure of entries in the ipSvcEntryTable.
STR ipSvcEntryPathString	1.3.6.1.4.1.2637.2.1.1101.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipSvcEntryRowStatus	1.3.6.1.4.1.2637.2.1.1101.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipSvcEntryKeyValue	1.3.6.1.4.1.2637.2.1.1101.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipSvcEntryService	1.3.6.1.4.1.2637.2.1.1101.1.11	INTEGER	read-create	which server to configure
INT ipSvcEntryAdminStatus	1.3.6.1.4.1.2637.2.1.1101.1.12	INTEGER	read-create	state of service
BOO ipSvcEntryRestricted	1.3.6.1.4.1.2637.2.1.1101.1.13	Boolean	read-create	configure service to respond to requests from admin ethernet only
ipSvcAuthEntryTable	1.3.6.1.4.1.2637.2.1.1111		not-accessible	Local user authentication information. Used to authenticate local services such as TELNET, FTP, etc...
ipSvcAuthEntryEntry	1.3.6.1.4.1.2637.2.1.1111.1		not-accessible	This is the structure of entries in the ipSvcAuthEntryTable.
STR ipSvcAuthEntryPathString	1.3.6.1.4.1.2637.2.1.1111.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipSvcAuthEntryRowStatus	1.3.6.1.4.1.2637.2.1.1111.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipSvcAuthEntryKeyValue	1.3.6.1.4.1.2637.2.1.1111.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR ipSvcAuthEntryUsername	1.3.6.1.4.1.2637.2.1.1111.1.11	DisplayString	read-create	the user name
STR ipSvcAuthEntryPassword	1.3.6.1.4.1.2637.2.1.1111.1.12	DisplayString	read-create	the password associated with the user name
INT ipSvcAuthEntryLevel	1.3.6.1.4.1.2637.2.1.1111.1.13	INTEGER	read-create	CLI level for this user (0 for monitor, 1 for admin)
BOO ipSvcAuthEntryModifyUserEntries	1.3.6.1.4.1.2637.2.1.1111.1.15	Boolean	read-create	User is able to modify CVX's user entries
BOO ipSvcAuthEntryModifyConfig	1.3.6.1.4.1.2637.2.1.1111.1.16	Boolean	read-create	User is able to modify CVX's configuration
BOO ipSvcAuthEntryAllowFTP	1.3.6.1.4.1.2637.2.1.1111.1.17	Boolean	read-create	User will be granted FTP access to the CVX
BOO ipSvcAuthEntryAllowTelnet	1.3.6.1.4.1.2637.2.1.1111.1.18	Boolean	read-create	User will be granted telnet access to the CVX
BOO ipSvcAuthEntryLevel0DisconnectUsers	1.3.6.1.4.1.2637.2.1.1111.1.19	Boolean	read-create	Level 0 User is able to disconnect remote user sessions
BOO ipSvcAuthEntryModifyPasswords	1.3.6.1.4.1.2637.2.1.1111.1.20	Boolean	read-create	User is able to view and modify the CVX's password members
BOO ipSvcAuthEntryAllowRLogin	1.3.6.1.4.1.2637.2.1.1111.1.21	Boolean	read-create	User will be granted rlogin access to the CVX
BOO ipSvcAuthEntryAllowRSh	1.3.6.1.4.1.2637.2.1.1111.1.22	Boolean	read-create	User will be granted rsh access to the CVX
ipAaaServerTable	1.3.6.1.4.1.2637.2.1.1115		not-accessible	configuration for a single AAA server
ipAaaServerEntry	1.3.6.1.4.1.2637.2.1.1115.1		not-accessible	This is the structure of entries in the ipAaaServerTable.
STR ipAaaServerPathString	1.3.6.1.4.1.2637.2.1.1115.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipAaaServerRowStatus	1.3.6.1.4.1.2637.2.1.1115.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipAaaServerKeyValue	1.3.6.1.4.1.2637.2.1.1115.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipAaaServerIndex	1.3.6.1.4.1.2637.2.1.1115.1.11	INTEGER	read-create	index of server within server group
INT ipAaaServerType	1.3.6.1.4.1.2637.2.1.1115.1.12	INTEGER	read-create	AAA server type.
IP ipAaaServerIpAddr	1.3.6.1.4.1.2637.2.1.1115.1.13	IpAddress	read-create	ip address of server
INT ipAaaServerIpPort	1.3.6.1.4.1.2637.2.1.1115.1.14	INTEGER	read-create	ip port of server
INT ipAaaServerTimeout	1.3.6.1.4.1.2637.2.1.1115.1.15	INTEGER	read-create	time to wait before retransmission
INT ipAaaServerRetries	1.3.6.1.4.1.2637.2.1.1115.1.16	INTEGER	read-create	maximum retransmissions before failure
STR ipAaaServerKey	1.3.6.1.4.1.2637.2.1.1115.1.17	DisplayString	read-create	shared secret key
BOO ipAaaServerTrace	1.3.6.1.4.1.2637.2.1.1115.1.18	Boolean	read-create	trace requests to/from server
INT ipAaaServerMonitorTimeout	1.3.6.1.4.1.2637.2.1.1115.1.21	INTEGER	read-create	In monitor mode, the timeout interval for sending test requests to an unreachable host.
INT ipAaaServerMonitorType	1.3.6.1.4.1.2637.2.1.1115.1.22	INTEGER	read-create	In monitor mode, the type of RADIUS message to send to an unreachable host.
STR ipAaaServerMonitorUsername	1.3.6.1.4.1.2637.2.1.1115.1.23	DisplayString	read-create	In monitor mode, username to send in test requests to an unreachable host.
STR ipAaaServerMonitorPassword	1.3.6.1.4.1.2637.2.1.1115.1.24	DisplayString	read-create	In monitor mode, password to send in test requests to an unreachable host.
ipAaaClientPortTable	1.3.6.1.4.1.2637.2.1.1116		not-accessible	group of UDP ports from which to send AAA requests
ipAaaClientPortEntry	1.3.6.1.4.1.2637.2.1.1116.1		not-accessible	This is the structure of entries in the ipAaaClientPortTable.
STR ipAaaClientPortPathString	1.3.6.1.4.1.2637.2.1.1116.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipAaaClientPortRowStatus	1.3.6.1.4.1.2637.2.1.1116.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipAaaClientPortKeyValue	1.3.6.1.4.1.2637.2.1.1116.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipAaaClientPortStartingPort	1.3.6.1.4.1.2637.2.1.1116.1.11	INTEGER	read-create	UDP port number
INT ipAaaClientPortPortCount	1.3.6.1.4.1.2637.2.1.1116.1.12	INTEGER	read-create	count of UDP ports
ipAaaRadiusConfigTable	1.3.6.1.4.1.2637.2.1.1119		not-accessible	AAA Radius Configuration.
ipAaaRadiusConfigEntry	1.3.6.1.4.1.2637.2.1.1119.1		not-accessible	This is the structure of entries in the ipAaaRadiusConfigTable.
STR ipAaaRadiusConfigPathString	1.3.6.1.4.1.2637.2.1.1119.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipAaaRadiusConfigRowStatus	1.3.6.1.4.1.2637.2.1.1119.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipAaaRadiusConfigKeyValue	1.3.6.1.4.1.2637.2.1.1119.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR ipAaaRadiusConfigNasId	1.3.6.1.4.1.2637.2.1.1119.1.11	DisplayString	read-create	optional string sent as NAS-ID
INT ipAaaRadiusConfigNasPortStyle	1.3.6.1.4.1.2637.2.1.1119.1.12	INTEGER	read-create	type of NAS-PORT info sent to server
INT ipAaaRadiusConfigSessionIdStyle	1.3.6.1.4.1.2637.2.1.1119.1.13	INTEGER	read-create	Format of the Acct-Session-Id to be sent to the RADIUS server. Binary is an unprintable binary encoding, while hex and dec are base-16 and base-10 printable strings. If the value of session_id_size is 64_bit, then the printable forms will be sent as two 32-bit values separated by a colon, for example: 04532FF0:0000300F.
INT ipAaaRadiusConfigSessionIdSize	1.3.6.1.4.1.2637.2.1.1119.1.14	INTEGER	read-create	Size of the Acct-Session-Id to be sent to the RADIUS server. The 32-bit version contains a session serial number that is incremented by one for each session number, and is reset to zero upon system reboot. The 64-bit version contains the same session serial number, but is prefixed with a 32-bit BootEra that is different each time this system is rebooted. The combined 64-bit value will be unique for all time for this system.
INT ipAaaRadiusConfigVendorSpecId	1.3.6.1.4.1.2637.2.1.1119.1.15	INTEGER	read-create	This item allows the enabling or disabling of the vendor specific attribute that identifies the sending RAS as a CVX in accounting and authentication radius records.
BOO ipAaaRadiusConfigVendorSpecMultilink	1.3.6.1.4.1.2637.2.1.1119.1.16	Boolean	read-create	Specifies whether the CVX vendor-specific attribute(s) for multilink should be included in the RADIUS Authenticate-Request frame. This should be set to 'true' for the CVX Policy Manager (CPM).
BOO ipAaaRadiusConfigAdditionalAuthEnabled	1.3.6.1.4.1.2637.2.1.1119.1.17	Boolean	read-create	Specifies whether the attributes for Ascend-Presession-Time, Ascend-Data-Rate and Ascend-Xmit-Rate should be included in RADIUS Access-Request frames.
BOO ipAaaRadiusConfigModemAcctEnabled	1.3.6.1.4.1.2637.2.1.1119.1.18	Boolean	read-create	Specifies whether CVX modem quality attributes should be included in the RADIUS Acct-Start and Acct-Stop requests.
BOO ipAaaRadiusConfigTerminateComponentEnabled	1.3.6.1.4.1.2637.2.1.1119.1.19	Boolean	read-create	Specifies whether the attributes for CVX-Terminate-Component should be included in the following RADIUS Accounting-Requests: Stop, Tunnel-Stop, Tunnel-Reject, Tunnel-Link-Stop and Tunnel-Link-Reject.
INT ipAaaRadiusConfigTier1Enable	1.3.6.1.4.1.2637.2.1.1119.1.20	INTEGER	read-create	This item allows the enabling or disabling of tier 1 authentication, which entails setting the service type to
ipDnsTable	1.3.6.1.4.1.2637.2.1.1120		not-accessible	DNS client configuration information
ipDnsEntry	1.3.6.1.4.1.2637.2.1.1120.1		not-accessible	This is the structure of entries in the ipDnsTable.
STR ipDnsPathString	1.3.6.1.4.1.2637.2.1.1120.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipDnsRowStatus	1.3.6.1.4.1.2637.2.1.1120.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipDnsKeyValue	1.3.6.1.4.1.2637.2.1.1120.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR ipDnsDefDomain	1.3.6.1.4.1.2637.2.1.1120.1.11	DisplayString	read-create	default domain name (i.e. 'abc.com')
INT ipDnsTimeout	1.3.6.1.4.1.2637.2.1.1120.1.12	INTEGER	read-create	timeout value
INT ipDnsRetry	1.3.6.1.4.1.2637.2.1.1120.1.13	INTEGER	read-create	retry count
ipDnsNsTable	1.3.6.1.4.1.2637.2.1.1121		not-accessible	DNS client name server configuration
ipDnsNsEntry	1.3.6.1.4.1.2637.2.1.1121.1		not-accessible	This is the structure of entries in the ipDnsNsTable.
STR ipDnsNsPathString	1.3.6.1.4.1.2637.2.1.1121.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipDnsNsRowStatus	1.3.6.1.4.1.2637.2.1.1121.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipDnsNsKeyValue	1.3.6.1.4.1.2637.2.1.1121.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipDnsNsIpAddr	1.3.6.1.4.1.2637.2.1.1121.1.11	IpAddress	read-create	ip address of DNS server
ipAaaGroupConfigTable	1.3.6.1.4.1.2637.2.1.1125		not-accessible	configuration for entire AAA server group
ipAaaGroupConfigEntry	1.3.6.1.4.1.2637.2.1.1125.1		not-accessible	This is the structure of entries in the ipAaaGroupConfigTable.
STR ipAaaGroupConfigPathString	1.3.6.1.4.1.2637.2.1.1125.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipAaaGroupConfigRowStatus	1.3.6.1.4.1.2637.2.1.1125.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipAaaGroupConfigKeyValue	1.3.6.1.4.1.2637.2.1.1125.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR ipAaaGroupConfigName	1.3.6.1.4.1.2637.2.1.1125.1.11	DisplayString	read-create	name of server group
BOO ipAaaGroupConfigParallelServers	1.3.6.1.4.1.2637.2.1.1125.1.12	Boolean	read-create	Set the servers in this group to be parallel
ipAaaSetConfigTable	1.3.6.1.4.1.2637.2.1.1126		not-accessible	configuration for entire AAA server group
ipAaaSetConfigEntry	1.3.6.1.4.1.2637.2.1.1126.1		not-accessible	This is the structure of entries in the ipAaaSetConfigTable.
STR ipAaaSetConfigPathString	1.3.6.1.4.1.2637.2.1.1126.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipAaaSetConfigRowStatus	1.3.6.1.4.1.2637.2.1.1126.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipAaaSetConfigKeyValue	1.3.6.1.4.1.2637.2.1.1126.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR ipAaaSetConfigName	1.3.6.1.4.1.2637.2.1.1126.1.11	DisplayString	read-create	name of server set
INT ipAaaSetConfigMode	1.3.6.1.4.1.2637.2.1.1126.1.12	INTEGER	read-create	mode in which server group operates
BOO ipAaaSetConfigFakeResponse	1.3.6.1.4.1.2637.2.1.1126.1.13	Boolean	read-create	create a fake response from server
ipAaaRadiusdConfigTable	1.3.6.1.4.1.2637.2.1.1128		not-accessible	configuration for the radius daemon
ipAaaRadiusdConfigEntry	1.3.6.1.4.1.2637.2.1.1128.1		not-accessible	This is the structure of entries in the ipAaaRadiusdConfigTable.
STR ipAaaRadiusdConfigPathString	1.3.6.1.4.1.2637.2.1.1128.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipAaaRadiusdConfigRowStatus	1.3.6.1.4.1.2637.2.1.1128.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipAaaRadiusdConfigKeyValue	1.3.6.1.4.1.2637.2.1.1128.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipAaaRadiusdConfigStatus	1.3.6.1.4.1.2637.2.1.1128.1.11	INTEGER	read-create	This item allows enabling or disabling of the radius daemon. When enabled, the radius daemon will support Ascend-Disconnect-Request RADIUS messages are sent by remote hosts to terminate dialup sessions on the switch.
INT ipAaaRadiusdConfigPort	1.3.6.1.4.1.2637.2.1.1128.1.12	INTEGER	read-create	Set UDP port the radius daemon receives requests on
ipAaaRadiusClientTable	1.3.6.1.4.1.2637.2.1.1129		not-accessible	configuration for a radius client
ipAaaRadiusClientEntry	1.3.6.1.4.1.2637.2.1.1129.1		not-accessible	This is the structure of entries in the ipAaaRadiusClientTable.
STR ipAaaRadiusClientPathString	1.3.6.1.4.1.2637.2.1.1129.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipAaaRadiusClientRowStatus	1.3.6.1.4.1.2637.2.1.1129.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipAaaRadiusClientKeyValue	1.3.6.1.4.1.2637.2.1.1129.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipAaaRadiusClientIndex	1.3.6.1.4.1.2637.2.1.1129.1.11	INTEGER	read-create	client index
IP ipAaaRadiusClientIpAddr	1.3.6.1.4.1.2637.2.1.1129.1.12	IpAddress	read-create	client ip address
INT ipAaaRadiusClientVpopId	1.3.6.1.4.1.2637.2.1.1129.1.13	INTEGER	read-create	vpop id accessible to this client
STR ipAaaRadiusClientSecret	1.3.6.1.4.1.2637.2.1.1129.1.14	DisplayString	read-create	shared secret key
INT ipAaaRadiusClientStatus	1.3.6.1.4.1.2637.2.1.1129.1.15	INTEGER	read-create	This item allows enabling or disabling of the radius client. When enabled, the radius client will be allowed to send Ascend-Disconnect-Request RADIUS messages in order to terminate dialup sessions on the switch.
BOO ipAaaRadiusClientTrace	1.3.6.1.4.1.2637.2.1.1129.1.16	Boolean	read-create	trace requests to/from this client
INT ipAaaRadiusClientRequiredAttribute	1.3.6.1.4.1.2637.2.1.1129.1.17	INTEGER	read-create	all: neeed to match all of username, framed_ip, session_id.
ipSyslogTable	1.3.6.1.4.1.2637.2.1.1130		not-accessible	syslog client configuration
ipSyslogEntry	1.3.6.1.4.1.2637.2.1.1130.1		not-accessible	This is the structure of entries in the ipSyslogTable.
STR ipSyslogPathString	1.3.6.1.4.1.2637.2.1.1130.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipSyslogRowStatus	1.3.6.1.4.1.2637.2.1.1130.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipSyslogKeyValue	1.3.6.1.4.1.2637.2.1.1130.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipSyslogDebugFlag	1.3.6.1.4.1.2637.2.1.1130.1.11	INTEGER	read-create	debug flag
IP ipSyslogIpAddr	1.3.6.1.4.1.2637.2.1.1130.1.12	IpAddress	read-create	ip address of syslog server
INT ipSyslogIpPort	1.3.6.1.4.1.2637.2.1.1130.1.13	INTEGER	read-create	udp port of syslog server
INT ipSyslogPriority	1.3.6.1.4.1.2637.2.1.1130.1.14	INTEGER	read-create	fixed syslog priority (zero to map)
INT ipSyslogFacility	1.3.6.1.4.1.2637.2.1.1130.1.15	INTEGER	read-create	fixed syslog facility code
INT ipSyslogFilterLevel	1.3.6.1.4.1.2637.2.1.1130.1.16	INTEGER	read-create	only transmit syslog messages of specified level or lower
ipShellTable	1.3.6.1.4.1.2637.2.1.1162		not-accessible	shell configuration
ipShellEntry	1.3.6.1.4.1.2637.2.1.1162.1		not-accessible	This is the structure of entries in the ipShellTable.
STR ipShellPathString	1.3.6.1.4.1.2637.2.1.1162.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipShellRowStatus	1.3.6.1.4.1.2637.2.1.1162.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipShellKeyValue	1.3.6.1.4.1.2637.2.1.1162.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR ipShellBannerMsg	1.3.6.1.4.1.2637.2.1.1162.1.13	DisplayString	read-create	shell banner message.
STR ipShellBasePrompt	1.3.6.1.4.1.2637.2.1.1162.1.14	DisplayString	read-create	shell session prompt string.
STR ipShellLoginPrompt	1.3.6.1.4.1.2637.2.1.1162.1.15	DisplayString	read-create	shell login prompt string.
STR ipShellPasswdPrompt	1.3.6.1.4.1.2637.2.1.1162.1.16	DisplayString	read-create	shell password prompt string.
STR ipShellBadPasswdMsg	1.3.6.1.4.1.2637.2.1.1162.1.17	DisplayString	read-create	shell invalid password response string.
ipRshellConfigTable	1.3.6.1.4.1.2637.2.1.1176		not-accessible	rshell configuration
ipRshellConfigEntry	1.3.6.1.4.1.2637.2.1.1176.1		not-accessible	This is the structure of entries in the ipRshellConfigTable.
STR ipRshellConfigPathString	1.3.6.1.4.1.2637.2.1.1176.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipRshellConfigRowStatus	1.3.6.1.4.1.2637.2.1.1176.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipRshellConfigKeyValue	1.3.6.1.4.1.2637.2.1.1176.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
BOO ipRshellConfigForceAddressValidation	1.3.6.1.4.1.2637.2.1.1176.1.11	Boolean	read-create	force RSH Address validation
ipRhostEntryTable	1.3.6.1.4.1.2637.2.1.1177		not-accessible	rhost entries used to authenticate rshell users
ipRhostEntryEntry	1.3.6.1.4.1.2637.2.1.1177.1		not-accessible	This is the structure of entries in the ipRhostEntryTable.
STR ipRhostEntryPathString	1.3.6.1.4.1.2637.2.1.1177.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipRhostEntryRowStatus	1.3.6.1.4.1.2637.2.1.1177.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipRhostEntryKeyValue	1.3.6.1.4.1.2637.2.1.1177.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR ipRhostEntryLocalUser	1.3.6.1.4.1.2637.2.1.1177.1.11	DisplayString	read-create	local username
STR ipRhostEntryRemoteUser	1.3.6.1.4.1.2637.2.1.1177.1.12	DisplayString	read-create	remote username
OCT ipRhostEntryRemoteHost	1.3.6.1.4.1.2637.2.1.1177.1.13	OCTET STRING	read-create	remote host name
BOO ipRhostEntryAllowRsh	1.3.6.1.4.1.2637.2.1.1177.1.14	Boolean	read-create	allow rsh access for this entry
BOO ipRhostEntryAllowRlogin	1.3.6.1.4.1.2637.2.1.1177.1.15	Boolean	read-create	allow rlogin access for this entry
ipRloginTable	1.3.6.1.4.1.2637.2.1.1178		not-accessible	rlogin server configuration
ipRloginEntry	1.3.6.1.4.1.2637.2.1.1178.1		not-accessible	This is the structure of entries in the ipRloginTable.
STR ipRloginPathString	1.3.6.1.4.1.2637.2.1.1178.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipRloginRowStatus	1.3.6.1.4.1.2637.2.1.1178.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipRloginKeyValue	1.3.6.1.4.1.2637.2.1.1178.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipRloginTcpPort	1.3.6.1.4.1.2637.2.1.1178.1.11	INTEGER	read-create	TCP port number for the rlogin server
ipRshTable	1.3.6.1.4.1.2637.2.1.1179		not-accessible	rsh server configuration
ipRshEntry	1.3.6.1.4.1.2637.2.1.1179.1		not-accessible	This is the structure of entries in the ipRshTable.
STR ipRshPathString	1.3.6.1.4.1.2637.2.1.1179.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipRshRowStatus	1.3.6.1.4.1.2637.2.1.1179.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipRshKeyValue	1.3.6.1.4.1.2637.2.1.1179.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipRshTcpPort	1.3.6.1.4.1.2637.2.1.1179.1.11	INTEGER	read-create	TCP port number for the rsh server
ipSnmpTable	1.3.6.1.4.1.2637.2.1.1180		not-accessible	SNMP server configuration
ipSnmpEntry	1.3.6.1.4.1.2637.2.1.1180.1		not-accessible	This is the structure of entries in the ipSnmpTable.
STR ipSnmpPathString	1.3.6.1.4.1.2637.2.1.1180.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipSnmpRowStatus	1.3.6.1.4.1.2637.2.1.1180.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipSnmpKeyValue	1.3.6.1.4.1.2637.2.1.1180.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipSnmpDebugFlag	1.3.6.1.4.1.2637.2.1.1180.1.11	INTEGER	read-create	turn on debug logging if non-zero
INT ipSnmpLogFlag	1.3.6.1.4.1.2637.2.1.1180.1.12	INTEGER	read-create	turn on session logging if non-zero
STR ipSnmpReadCommunity	1.3.6.1.4.1.2637.2.1.1180.1.13	DisplayString	read-create	The authentication string required for SNMP read access via SNMP. Currently only one read community string is supported.
BOO ipSnmpWriteEnabled	1.3.6.1.4.1.2637.2.1.1180.1.14	Boolean	read-create	If true, SNMP SET operations are permitted.
STR ipSnmpWriteCommunity	1.3.6.1.4.1.2637.2.1.1180.1.15	DisplayString	read-create	The authentication string required for SNMP write access via SNMP. Currently only one write community string is supported.
INT ipSnmpMaxSnmpLoad	1.3.6.1.4.1.2637.2.1.1180.1.16	INTEGER	read-create	Maximum number of simultaneous SNMP requests permitted.
ipTrapCfgTable	1.3.6.1.4.1.2637.2.1.1191		not-accessible	SNMP Trap server configuration
ipTrapCfgEntry	1.3.6.1.4.1.2637.2.1.1191.1		not-accessible	This is the structure of entries in the ipTrapCfgTable.
STR ipTrapCfgPathString	1.3.6.1.4.1.2637.2.1.1191.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipTrapCfgRowStatus	1.3.6.1.4.1.2637.2.1.1191.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipTrapCfgKeyValue	1.3.6.1.4.1.2637.2.1.1191.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipTrapCfgPriority	1.3.6.1.4.1.2637.2.1.1191.1.11	INTEGER	read-create	minimum write event priority to generate traps from
INT ipTrapCfgIpPort	1.3.6.1.4.1.2637.2.1.1191.1.12	INTEGER	read-create	udp trap port
IP ipTrapCfgIpAddr	1.3.6.1.4.1.2637.2.1.1191.1.13	IpAddress	read-create	ip address of trap consumer
OCT ipTrapCfgCommunityStr	1.3.6.1.4.1.2637.2.1.1191.1.14	OCTET STRING	read-create	SNMP trap community string
INT ipTrapCfgVerTrapType	1.3.6.1.4.1.2637.2.1.1191.1.15	INTEGER	read-create	Send the trap in V1 or V2 format.
INT ipTrapCfgAuthTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.16	INTEGER	read-create	Enable or disable all authentication failure traps.
INT ipTrapCfgMacModemsThresholdTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.20	INTEGER	read-create	Enable or disable cvx-mac-modems-below-threshold and cvx-mac-modems-above-threshold traps.
INT ipTrapCfgTotalModemsThresholdTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.21	INTEGER	read-create	Enable or disable cvx-total-modems-below-threshold and cvx-total-modems-above-threshold traps.
INT ipTrapCfgLocalPswdChangeTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.22	INTEGER	read-create	Enable or disable cvx-local-pswd-change trap.
INT ipTrapCfgAcctServerTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.23	INTEGER	read-create	Enable or disable cvx-acct-server-failure and cvx-acct-server-failover traps.
INT ipTrapCfgSs7GatewayTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.24	INTEGER	read-create	Enable or disable cvx-ss7-gateway-up, cvx-ss7-gateway-down and cvx-ss7-gateway-failover traps.
INT ipTrapCfgTunnelTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.25	INTEGER	read-create	Enable or disable cvx-tunnel-start, cvx-tunnel-stop and cvx-tunnel-reject traps.
INT ipTrapCfgDs3FailoverTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.26	INTEGER	read-create	Enable or disable cvx-ds3-failover trap.
INT ipTrapCfgSccFailoverTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.27	INTEGER	read-create	Enable or disable cvx-scc-failover trap.
INT ipTrapCfgEthernetPortTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.28	INTEGER	read-create	Enable or disable cvx-ethernet-port-up and ethernet-port-down traps.
INT ipTrapCfgHssiPortTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.29	INTEGER	read-create	Enable or disable cvx-hssi-port-up and cvx-hssi-port-down traps.
INT ipTrapCfgRemoteAuthTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.30	INTEGER	read-create	Enable or disable cvx-preAuth-fail, cvx-auth-fail, cvx-auth-server-failover and cvxAuthServerRevived traps.
INT ipTrapCfgLocalAuthFailThresholdTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.31	INTEGER	read-create	Enable or disable cvx-local-auth-failure-threshold-exceeded trap.
INT ipTrapCfgRemoteAuthPacketDiscardTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.32	INTEGER	read-create	Enable or disable cvx-remote-auth-packet-discard trap.
INT ipTrapCfgIsdnTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.33	INTEGER	read-create	Enable or disable aptis-isdn-link-up, aptis-isdn-link-down and aptis-isdn-link-reset traps.
INT ipTrapCfgFilterErrorTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.34	INTEGER	read-create	Enable or disable cvx-filter-error traps.
INT ipTrapCfgDhcpTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.35	INTEGER	read-create	Enable or disable DHCP traps cvxPrimaryDhcpServerContactFailed, cvxPrimaryDhcpServerContactRevived and cvxSecondaryDhcpServerContactFailed.
INT ipTrapCfgSccTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.36	INTEGER	read-create	Enable or disable scc traps cvx-slave-flash-missing, cvxSlaveSccFlashDetected, cvxSlaveSccRemoved, cvxSlaveSccInserted, and cvxFailedSlaveSccRemoved.
INT ipTrapCfgGenericLinkTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.37	INTEGER	read-create	Enable or disable generic traps linkDown and linkUp.
INT ipTrapCfgRadiusdTrapStatus	1.3.6.1.4.1.2637.2.1.1191.1.38	INTEGER	read-create	Enable or disable cvx-radiusd-session-disc, cvx-radiusd-unknown-client and cvx-radiusd-client-auth-failed traps.
ipDsmccTable	1.3.6.1.4.1.2637.2.1.1192		not-accessible	Digital Storage Media Command and Control.
ipDsmccEntry	1.3.6.1.4.1.2637.2.1.1192.1		not-accessible	This is the structure of entries in the ipDsmccTable.
STR ipDsmccPathString	1.3.6.1.4.1.2637.2.1.1192.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipDsmccRowStatus	1.3.6.1.4.1.2637.2.1.1192.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipDsmccKeyValue	1.3.6.1.4.1.2637.2.1.1192.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipDsmccDebugFlag	1.3.6.1.4.1.2637.2.1.1192.1.11	INTEGER	read-create	turn on debug logging if non-zero
INT ipDsmccLogFlag	1.3.6.1.4.1.2637.2.1.1192.1.12	INTEGER	read-create	turn on session logging if non-zero
ipSntpTable	1.3.6.1.4.1.2637.2.1.1193		not-accessible	SNTP client configuration
ipSntpEntry	1.3.6.1.4.1.2637.2.1.1193.1		not-accessible	This is the structure of entries in the ipSntpTable.
STR ipSntpPathString	1.3.6.1.4.1.2637.2.1.1193.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipSntpRowStatus	1.3.6.1.4.1.2637.2.1.1193.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipSntpKeyValue	1.3.6.1.4.1.2637.2.1.1193.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipSntpUpdateFrequency	1.3.6.1.4.1.2637.2.1.1193.1.11	INTEGER	read-create	Frequency to sync with the master clock
IP ipSntpMasterClockAddr	1.3.6.1.4.1.2637.2.1.1193.1.12	IpAddress	read-create	Ip address of the master NTP clock server which to sync with. Address 224.0.1.1 is the NTP ip multicast address.
INT ipSntpAdjustment	1.3.6.1.4.1.2637.2.1.1193.1.13	INTEGER	read-create	Amount of time in minutes to add or subtract from the received NTP server time.
INT ipSntpAdjSign	1.3.6.1.4.1.2637.2.1.1193.1.14	INTEGER	read-create	Determines if adjustment is added or subtracted from the NTP server time.
ipSgcpTable	1.3.6.1.4.1.2637.2.1.1194		not-accessible	Simple Gateway Control Protocol.
ipSgcpEntry	1.3.6.1.4.1.2637.2.1.1194.1		not-accessible	This is the structure of entries in the ipSgcpTable.
STR ipSgcpPathString	1.3.6.1.4.1.2637.2.1.1194.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipSgcpRowStatus	1.3.6.1.4.1.2637.2.1.1194.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipSgcpKeyValue	1.3.6.1.4.1.2637.2.1.1194.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipSgcpDebugFlag	1.3.6.1.4.1.2637.2.1.1194.1.11	INTEGER	read-create	turn on debug logging if non-zero
INT ipSgcpLogFlag	1.3.6.1.4.1.2637.2.1.1194.1.12	INTEGER	read-create	turn on session logging if non-zero
ipIpdcTable	1.3.6.1.4.1.2637.2.1.1197		not-accessible	IPDC table.
ipIpdcEntry	1.3.6.1.4.1.2637.2.1.1197.1		not-accessible	This is the structure of entries in the ipIpdcTable.
STR ipIpdcPathString	1.3.6.1.4.1.2637.2.1.1197.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipIpdcRowStatus	1.3.6.1.4.1.2637.2.1.1197.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipIpdcKeyValue	1.3.6.1.4.1.2637.2.1.1197.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipIpdcDebugFlag	1.3.6.1.4.1.2637.2.1.1197.1.11	INTEGER	read-create	turn on debug logging if non-zero
INT ipIpdcLogFlag	1.3.6.1.4.1.2637.2.1.1197.1.12	INTEGER	read-create	turn on session logging if non-zero
ipSsTable	1.3.6.1.4.1.2637.2.1.1198		not-accessible	IPSS table.
ipSsEntry	1.3.6.1.4.1.2637.2.1.1198.1		not-accessible	This is the structure of entries in the ipSsTable.
STR ipSsPathString	1.3.6.1.4.1.2637.2.1.1198.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipSsRowStatus	1.3.6.1.4.1.2637.2.1.1198.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipSsKeyValue	1.3.6.1.4.1.2637.2.1.1198.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipSsDebugFlag	1.3.6.1.4.1.2637.2.1.1198.1.11	INTEGER	read-create	turn on debug logging if non-zero
INT ipSsLogFlag	1.3.6.1.4.1.2637.2.1.1198.1.12	INTEGER	read-create	turn on session logging if non-zero
cHdlcTable	1.3.6.1.4.1.2637.2.1.1210		not-accessible	Cisco High Level Data Link Control Information.
cHdlcEntry	1.3.6.1.4.1.2637.2.1.1210.1		not-accessible	This is the structure of entries in the cHdlcTable.
STR cHdlcPathString	1.3.6.1.4.1.2637.2.1.1210.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW cHdlcRowStatus	1.3.6.1.4.1.2637.2.1.1210.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT cHdlcKeyValue	1.3.6.1.4.1.2637.2.1.1210.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP cHdlcIpAddr	1.3.6.1.4.1.2637.2.1.1210.1.11	IpAddress	read-create	IP Address for local side of connection.
IP cHdlcIpMask	1.3.6.1.4.1.2637.2.1.1210.1.12	IpAddress	read-create	IP Address mask for local side of connection.
INT cHdlcMaxMissedKeepalives	1.3.6.1.4.1.2637.2.1.1210.1.13	INTEGER	read-create	Maximum number of missed keep-alive messages.
INT cHdlcMaxLoopCount	1.3.6.1.4.1.2637.2.1.1210.1.14	INTEGER	read-create	Maximum number of loopback packets before connection is dropped.
ipDsbyteTable	1.3.6.1.4.1.2637.2.1.1224		not-accessible	IP DS Byte Information.
ipDsbyteEntry	1.3.6.1.4.1.2637.2.1.1224.1		not-accessible	This is the structure of entries in the ipDsbyteTable.
STR ipDsbytePathString	1.3.6.1.4.1.2637.2.1.1224.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipDsbyteRowStatus	1.3.6.1.4.1.2637.2.1.1224.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipDsbyteKeyValue	1.3.6.1.4.1.2637.2.1.1224.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
BOO ipDsbyteDSByteEnabled	1.3.6.1.4.1.2637.2.1.1224.1.11	Boolean	read-create	the flag to indicate whether ds byte setting is enabled
INT ipDsbyteDSByteValue	1.3.6.1.4.1.2637.2.1.1224.1.12	INTEGER	read-create	the ds byte value
ipCleartcpTable	1.3.6.1.4.1.2637.2.1.1230		not-accessible	Clear TCP Information.
ipCleartcpEntry	1.3.6.1.4.1.2637.2.1.1230.1		not-accessible	This is the structure of entries in the ipCleartcpTable.
STR ipCleartcpPathString	1.3.6.1.4.1.2637.2.1.1230.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipCleartcpRowStatus	1.3.6.1.4.1.2637.2.1.1230.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipCleartcpKeyValue	1.3.6.1.4.1.2637.2.1.1230.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipCleartcpLocalIp	1.3.6.1.4.1.2637.2.1.1230.1.11	IpAddress	read-create	IP Address for local side of connection.
INT ipCleartcpLocalPort	1.3.6.1.4.1.2637.2.1.1230.1.12	INTEGER	read-create	IP port for local side of connection.
BOO ipCleartcpLocalPortAllocated	1.3.6.1.4.1.2637.2.1.1230.1.13	Boolean	read-create	If TRUE, pool allocated for session.
STR ipCleartcpRemoteHostname	1.3.6.1.4.1.2637.2.1.1230.1.14	DisplayString	read-create	DNS name of remote TCP server.
INT ipCleartcpRemotePort	1.3.6.1.4.1.2637.2.1.1230.1.15	INTEGER	read-create	IP port of remote TCP server.
INT ipCleartcpConnectType	1.3.6.1.4.1.2637.2.1.1230.1.16	INTEGER	read-create	Connection methodology.
INT ipCleartcpTcpConnectTimeout	1.3.6.1.4.1.2637.2.1.1230.1.17	INTEGER	read-create	Connect (syn-ack) timeout.
INT ipCleartcpHostIpCount	1.3.6.1.4.1.2637.2.1.1230.1.20	INTEGER	read-create	Number of IP Addresses to try.
STR ipCleartcpHostIpList	1.3.6.1.4.1.2637.2.1.1230.1.21	DisplayString	read-create	List of IP Addresses to try (up to 32).
ipAddressBlockTable	1.3.6.1.4.1.2637.2.1.1241		not-accessible	This class defines a block of addresses that are contributed to an IP Address pool for dynamic allocation.
ipAddressBlockEntry	1.3.6.1.4.1.2637.2.1.1241.1		not-accessible	This is the structure of entries in the ipAddressBlockTable.
STR ipAddressBlockPathString	1.3.6.1.4.1.2637.2.1.1241.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipAddressBlockRowStatus	1.3.6.1.4.1.2637.2.1.1241.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipAddressBlockKeyValue	1.3.6.1.4.1.2637.2.1.1241.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipAddressBlockStart	1.3.6.1.4.1.2637.2.1.1241.1.11	IpAddress	read-create	The first IP Address of this IP pool.
INT ipAddressBlockCount	1.3.6.1.4.1.2637.2.1.1241.1.12	INTEGER	read-create	The number of addresses in this address block.
IP ipAddressBlockMask	1.3.6.1.4.1.2637.2.1.1241.1.13	IpAddress	read-create	The IP Address mask that describes this address block if and only if this address block is CIDR-compliant.
BOO ipAddressBlockRangeInUse	1.3.6.1.4.1.2637.2.1.1241.1.14	Boolean	read-create	This is set internally by the software when an IP Address from this range is in use. This attribute should not be set.
INT ipAddressBlockAdminStatus	1.3.6.1.4.1.2637.2.1.1241.1.15	INTEGER	read-create	Set to enabled (1) to allow IP Addresses to be allocated from this range, set to disabled(2) to dry it out.
ipPoolConfigTable	1.3.6.1.4.1.2637.2.1.1242		not-accessible	Address Block Instances that each define an IP Address range.
ipPoolConfigEntry	1.3.6.1.4.1.2637.2.1.1242.1		not-accessible	This is the structure of entries in the ipPoolConfigTable.
STR ipPoolConfigPathString	1.3.6.1.4.1.2637.2.1.1242.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipPoolConfigRowStatus	1.3.6.1.4.1.2637.2.1.1242.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipPoolConfigKeyValue	1.3.6.1.4.1.2637.2.1.1242.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
BOO ipPoolConfigPrivate	1.3.6.1.4.1.2637.2.1.1242.1.11	Boolean	read-create	If TRUE, pool is not eligible for pool 0 global search.
pppConfigTable	1.3.6.1.4.1.2637.2.1.1313		not-accessible	PPP Configuration Information.
pppConfigEntry	1.3.6.1.4.1.2637.2.1.1313.1		not-accessible	This is the structure of entries in the pppConfigTable.
STR pppConfigPathString	1.3.6.1.4.1.2637.2.1.1313.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW pppConfigRowStatus	1.3.6.1.4.1.2637.2.1.1313.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT pppConfigKeyValue	1.3.6.1.4.1.2637.2.1.1313.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT pppConfigEstablishTimeLimit	1.3.6.1.4.1.2637.2.1.1313.1.111	INTEGER	read-create	The amount of time allowed for initial LCP negotiation and authentication
INT pppConfigConnectLimit	1.3.6.1.4.1.2637.2.1.1313.1.112	INTEGER	read-create	Overall connection time limit (in minutes, 0 = no limit)
INT pppConfigInactivityLimit	1.3.6.1.4.1.2637.2.1.1313.1.113	INTEGER	read-create	Maximum inactivity time (in minutes) before user is disconnected (0 = no limit)
BOO pppConfigMonitorTxActivity	1.3.6.1.4.1.2637.2.1.1313.1.114	Boolean	read-create	If an inactivity limit is set, specifies whether transmitted packets (sent to the remote caller) should be monitored for activity. If set to false, then transmitted data is ignored, and cannot keep the call up.
BOO pppConfigMonitorRxActivity	1.3.6.1.4.1.2637.2.1.1313.1.115	Boolean	read-create	If an inactivity limit is set, specifies whether received packets (sent by the remote caller) should be monitored for activity. If set to false, then received data is ignored, and cannot keep the call up.
BOO pppConfigCountRIP	1.3.6.1.4.1.2637.2.1.1313.1.116	Boolean	read-create	Specifies whether RIP frames should count as activity, and thus should reset the inactivity timer
BOO pppConfigCountPings	1.3.6.1.4.1.2637.2.1.1313.1.117	Boolean	read-create	Specifies whether ICMP Echo Request and Echo Reply (ping) frames should count as activity, and thus should reset the inactivity timer
BOO pppConfigCountIGMP	1.3.6.1.4.1.2637.2.1.1313.1.118	Boolean	read-create	Specifies whether IGMP frames should count as activity, and thus should reset the inactivity timer
BOO pppConfigUseEchoes	1.3.6.1.4.1.2637.2.1.1313.1.211	Boolean	read-create	Send periodic LCP Echo-Request frames to detect dead links
BOO pppConfigSendID	1.3.6.1.4.1.2637.2.1.1313.1.212	Boolean	read-create	Send LCP Identification frame when LCP negotiation begins
BOO pppConfigSendTimeRemaining	1.3.6.1.4.1.2637.2.1.1313.1.213	Boolean	read-create	Send periodic LCP Time-Remaining frames to inform remote peer of connection time limit
BOO pppConfigSendMRU	1.3.6.1.4.1.2637.2.1.1313.1.311	Boolean	read-create	Include the Maximum-Receive-Unit option in transmitted LCP Configure-Request frames, informing remote peer of local MRU value
BOO pppConfigSendACCM	1.3.6.1.4.1.2637.2.1.1313.1.312	Boolean	read-create	Include the Asynchronous-Control-Character-Map option in transmitted LCP Configure-Request frames, informing remote peer of control characters it must escape when transmitting
BOO pppConfigSendMagic	1.3.6.1.4.1.2637.2.1.1313.1.313	Boolean	read-create	Include the Magic-Number option in transmitted LCP Configure-Request frames
BOO pppConfigSendPFC	1.3.6.1.4.1.2637.2.1.1313.1.314	Boolean	read-create	Include the Protocol-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting
BOO pppConfigSendACFC	1.3.6.1.4.1.2637.2.1.1313.1.315	Boolean	read-create	Include the Address-and-Control-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting, allowing the remote peer to omit the Address and Control fields when transmitting
BOO pppConfigSendShortSeq	1.3.6.1.4.1.2637.2.1.1313.1.316	Boolean	read-create	Include the Multilink Short Sequence Number option in transmitted LCP Configure-Request frames, allowing peer to transmit MLP frames with short (12-bit) sequence numbers
BOO pppConfigSendEndpointDisc	1.3.6.1.4.1.2637.2.1.1313.1.317	Boolean	read-create	Include the Multilink Endpoint Discriminator option in transmitted LCP Configure-Request frames
BOO pppConfigAllowMRU	1.3.6.1.4.1.2637.2.1.1313.1.321	Boolean	read-create	Allow the remote peer to specify its Maximum-Receive-Unit value in LCP Configure-Request frames it transmits
BOO pppConfigAllowACCM	1.3.6.1.4.1.2637.2.1.1313.1.322	Boolean	read-create	Allow the remote peer to include its Asynchronous-Control-Character-Map value in LCP Configure-Request frames its transmits
BOO pppConfigAllowMagic	1.3.6.1.4.1.2637.2.1.1313.1.323	Boolean	read-create	Allow the remote peer to include its Magic-Number value in LCP Configure-Request frames it transmits
BOO pppConfigAllowPFC	1.3.6.1.4.1.2637.2.1.1313.1.324	Boolean	read-create	Allow the remote peer to include the Protocol-Field-Compression option in LCP Configure-Request frames it transmits, allowing the local interface to compress the protocol field when transmitting
BOO pppConfigAllowACFC	1.3.6.1.4.1.2637.2.1.1313.1.325	Boolean	read-create	Allow the remote peer to include the Address-and-Control-Field-Compression option in LCP Configure-Request frames it transmits, allowing the remote peer to compress the protocol field when transmitting, allowing the local interface to omit the Address and Control fields when transmitting
BOO pppConfigAllowShortSeq	1.3.6.1.4.1.2637.2.1.1313.1.326	Boolean	read-create	Allow the peer to include the Multilink Short Sequence Number option in LCP Configure-Request frames it transmits, instructing the local interface to transmit MLP frames with short (12-bit) sequence numbers
BOO pppConfigAllowEndpointDisc	1.3.6.1.4.1.2637.2.1.1313.1.327	Boolean	read-create	Allow the remote peer to include the Multilink Endpoint Discriminator option in LCP Configure-Request frames it transmits
INT pppConfigLCPMaxConfigure	1.3.6.1.4.1.2637.2.1.1313.1.411	INTEGER	read-create	Max-Configure value for LCP negotiation
INT pppConfigLCPRestartTimer	1.3.6.1.4.1.2637.2.1.1313.1.412	INTEGER	read-create	Time (in milliseconds) between unanswered LCP Configure-Request frames
BOO pppConfigPassiveLCP	1.3.6.1.4.1.2637.2.1.1313.1.413	Boolean	read-create	Don't send an LCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
INT pppConfigPassiveLCPTimeout	1.3.6.1.4.1.2637.2.1.1313.1.414	INTEGER	read-create	The amount of time (in milliseconds) that LCP will wait for the peer to send a Configure-Request before sending one
INT pppConfigMinRemoteMRU	1.3.6.1.4.1.2637.2.1.1313.1.511	INTEGER	read-create	Minimum acceptable value for Max-Receive-Unit specified by remote peer
INT pppConfigMinLocalMRU	1.3.6.1.4.1.2637.2.1.1313.1.512	INTEGER	read-create	Minimum acceptable value for Max-Receive-Unit for local interface
INT pppConfigDesiredLocalMRU	1.3.6.1.4.1.2637.2.1.1313.1.513	INTEGER	read-create	Desired value for Max-Receive-Unit for local interface
INT pppConfigTransmitACCM	1.3.6.1.4.1.2637.2.1.1313.1.514	INTEGER	read-create	Required bits in transmit Async-Character-Control-Mask (specified in remote peer's Configure-Request)
INT pppConfigReceiveACCM	1.3.6.1.4.1.2637.2.1.1313.1.515	INTEGER	read-create	Required bits in receive Async-Character-Control-Mask (specified in local interface's Configure-Request)
INT pppConfigMinRemoteMRRU	1.3.6.1.4.1.2637.2.1.1313.1.516	INTEGER	read-create	Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer. If peer will not negotiate an MRRU this size or greater, then multilink will not be allowed.
INT pppConfigDesiredRemoteMRRU	1.3.6.1.4.1.2637.2.1.1313.1.517	INTEGER	read-create	Desired value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer
INT pppConfigMinLocalMRRU	1.3.6.1.4.1.2637.2.1.1313.1.518	INTEGER	read-create	Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit for local interface
INT pppConfigDesiredLocalMRRU	1.3.6.1.4.1.2637.2.1.1313.1.519	INTEGER	read-create	Desired value for Multilink Max-Reconstructed-Receive-Unit for local interface
INT pppConfigLCPEchoRetries	1.3.6.1.4.1.2637.2.1.1313.1.520	INTEGER	read-create	The number of unanswered LCP Echo-Requests transmitted before the link is declared dead
INT pppConfigLCPEchoTimeout	1.3.6.1.4.1.2637.2.1.1313.1.521	INTEGER	read-create	Time (in milliseconds) between answered LCP Echo-Request frames
INT pppConfigLCPEchoErrorTimeout	1.3.6.1.4.1.2637.2.1.1313.1.522	INTEGER	read-create	Time (in milliseconds) between unanswered LCP Echo-Request frames
INT pppConfigTimeRemainingInterval	1.3.6.1.4.1.2637.2.1.1313.1.523	INTEGER	read-create	Time (in milliseconds) between transmitted Time-Remaining frames
STR pppConfigIDText	1.3.6.1.4.1.2637.2.1.1313.1.524	DisplayString	read-create	Text sent in LCP Identification frame transmitted when LCP negotiation begins
BOO pppConfigAuthRequire	1.3.6.1.4.1.2637.2.1.1313.1.611	Boolean	read-create	Require authentication of remote peer
BOO pppConfigAuthAllow	1.3.6.1.4.1.2637.2.1.1313.1.612	Boolean	read-create	Allow remote peer to require authentication of local interface
INT pppConfigAuthServerProtocol1	1.3.6.1.4.1.2637.2.1.1313.1.620	INTEGER	read-create	1st preference for authentication protocol to use when authenticating the remote peer
INT pppConfigAuthServerProtocol2	1.3.6.1.4.1.2637.2.1.1313.1.621	INTEGER	read-create	2nd preference for authentication protocol to use when authenticating the remote peer
INT pppConfigAuthServerProtocol3	1.3.6.1.4.1.2637.2.1.1313.1.622	INTEGER	read-create	3rd preference for authentication protocol to use when authenticating the remote peer
INT pppConfigAuthServerProtocol4	1.3.6.1.4.1.2637.2.1.1313.1.623	INTEGER	read-create	4th preference for authentication protocol to use when authenticating the remote peer
INT pppConfigAuthClientProtocol1	1.3.6.1.4.1.2637.2.1.1313.1.631	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppConfigAuthClientProtocol2	1.3.6.1.4.1.2637.2.1.1313.1.632	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppConfigAuthClientProtocol3	1.3.6.1.4.1.2637.2.1.1313.1.633	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppConfigAuthClientProtocol4	1.3.6.1.4.1.2637.2.1.1313.1.634	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppConfigPAPClientRetries	1.3.6.1.4.1.2637.2.1.1313.1.641	INTEGER	read-create	Number of retries Password Authentication Protocol client will make when attempting to authenticate with the remote peer
INT pppConfigPAPClientTimeout	1.3.6.1.4.1.2637.2.1.1313.1.642	INTEGER	read-create	Time between transmitted Password Authentication Protocol Authenticate-Request frames
INT pppConfigPAPServerRetries	1.3.6.1.4.1.2637.2.1.1313.1.643	INTEGER	read-create	Number of authentication attempts granted to the remote peer when using the Password Authentication Protocol
INT pppConfigPAPServerTimeout	1.3.6.1.4.1.2637.2.1.1313.1.644	INTEGER	read-create	Not sure this applies...
INT pppConfigCHAPClientRetries	1.3.6.1.4.1.2637.2.1.1313.1.651	INTEGER	read-create	Number of retries the CHAP client will make when attempting to authenticate with the remote peer
INT pppConfigCHAPClientTimeout	1.3.6.1.4.1.2637.2.1.1313.1.652	INTEGER	read-create	Time between transmitted CHAP Response frames
INT pppConfigCHAPServerRetries	1.3.6.1.4.1.2637.2.1.1313.1.653	INTEGER	read-create	Number of authentication attempts granted to the remote peer when using CHAP
INT pppConfigCHAPServerChallenges	1.3.6.1.4.1.2637.2.1.1313.1.654	INTEGER	read-create	Number of unanswered Challenge frames sent to the remote peer when using CHAP
INT pppConfigCHAPServerTimeout	1.3.6.1.4.1.2637.2.1.1313.1.655	INTEGER	read-create	Time between transmitted CHAP Challenge frames
INT pppConfigCHAPValueLength	1.3.6.1.4.1.2637.2.1.1313.1.656	INTEGER	read-create	The length (in octets) of the CHAP Value sent to the remote user in CHAP Challenge frames. This number must be a factor of 4. Note that some RADIUS servers support only Challenge Values of 16 bytes, so this length should not be changed unless it is supported by the RADIUS server in use.
BOO pppConfigAuthFailureRenegotiatesLCP	1.3.6.1.4.1.2637.2.1.1313.1.657	Boolean	read-create	Determines what occurs after an authentication failure. If true, and if more than one authentication protocol is enabled (in AuthServerProtocol1, 2, etc.), then LCP is renegotiated with the second authentication protocol.
STR pppConfigUserName	1.3.6.1.4.1.2637.2.1.1313.1.661	DisplayString	read-create	User name used when attempting to authenticate with the remote peer
STR pppConfigPassword	1.3.6.1.4.1.2637.2.1.1313.1.662	DisplayString	read-create	Password used when attempting to authenticate with the remote peer
BOO pppConfigIPCPEnabled	1.3.6.1.4.1.2637.2.1.1313.1.711	Boolean	read-create	IP Control Protocol Enabled
IP pppConfigLocalIPAddress	1.3.6.1.4.1.2637.2.1.1313.1.712	IpAddress	read-create	IP address assigned to the local side of the PPP link
IP pppConfigRemoteIPAddress	1.3.6.1.4.1.2637.2.1.1313.1.713	IpAddress	read-create	IP address assigned to the remote peer of the PPP link
BOO pppConfigAllowPeerIPAddress	1.3.6.1.4.1.2637.2.1.1313.1.714	Boolean	read-create	Allow remote peer to specify its IP address. Note that if this option is enabled
BOO pppConfigVJEnabled	1.3.6.1.4.1.2637.2.1.1313.1.715	Boolean	read-create	Specifies whether Van Jacobson TCP/IP header compression (as specified in RFC 1144) should be negotiated. Due to bugs in some widely-available implementations, this option specifies whether VJ is enabled or disabled in both directions (compression and decompression).
INT pppConfigVJSlots	1.3.6.1.4.1.2637.2.1.1313.1.716	INTEGER	read-create	Specifies the number of Van Jacobson TCP/IP compression slots to use in each direction (compression and decompression). The default of 16 is strongly recommended, as many widely-available implementations do not interoperate when a different number is negotiated.
BOO pppConfigSendDNS	1.3.6.1.4.1.2637.2.1.1313.1.717	Boolean	read-create	Send configured Domain Name Server addresses to the remote peer, according to RFC 1877
BOO pppConfigSendNBNS	1.3.6.1.4.1.2637.2.1.1313.1.718	Boolean	read-create	Send configured NetBIOS Name Server addresses to the remote peer, according to RFC 1877
INT pppConfigIPCPMaxConfigure	1.3.6.1.4.1.2637.2.1.1313.1.719	INTEGER	read-create	Max-Configure value for IPCP negotiation
INT pppConfigIPCPRestartTimer	1.3.6.1.4.1.2637.2.1.1313.1.720	INTEGER	read-create	Time (in milliseconds) between unanswered IPCP Configure-Request frames
BOO pppConfigPassiveIPCP	1.3.6.1.4.1.2637.2.1.1313.1.721	Boolean	read-create	Don't send an IPCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
INT pppConfigPassiveIPCPTimeout	1.3.6.1.4.1.2637.2.1.1313.1.722	INTEGER	read-create	The amount of time (in milliseconds) that IPCP will wait for the peer to send a Configure-Request before sending one
IP pppConfigDNS1	1.3.6.1.4.1.2637.2.1.1313.1.723	IpAddress	read-create	Primary Doman Name Server address
IP pppConfigDNS2	1.3.6.1.4.1.2637.2.1.1313.1.724	IpAddress	read-create	Secondary Doman Name Server address
IP pppConfigNBNS1	1.3.6.1.4.1.2637.2.1.1313.1.725	IpAddress	read-create	Primary NetBIOS Name Server address
IP pppConfigNBNS2	1.3.6.1.4.1.2637.2.1.1313.1.726	IpAddress	read-create	Secondary NetBIOS Name Server address
INT pppConfigSendLocalIPAddress	1.3.6.1.4.1.2637.2.1.1313.1.727	INTEGER	read-create	Specifies when the local IP address should be send to the remote peer in an IPCP Configure-Request frame. If set to Requested, then the option is sent only if the remote peer requests it via a Configure-Nak option.
INT pppConfigPeerNSStrategy	1.3.6.1.4.1.2637.2.1.1313.1.729	INTEGER	read-create	Specifies how DNS/NBNS values suggested by peer will be handled. They will either be Config-Rejected (Reject), Config-Acked (Ack), or ignored and negotiated with Config-Nak with the configured values (Ignore).
BOO pppConfigMLPEnabled	1.3.6.1.4.1.2637.2.1.1313.1.811	Boolean	read-create	Multilink protocol (MLP) enabled
INT pppConfigMLPMaxLinks	1.3.6.1.4.1.2637.2.1.1313.1.812	INTEGER	read-create	Maximum number of links permitted in a Multilink bundle
INT pppConfigMLPFragmentSize	1.3.6.1.4.1.2637.2.1.1313.1.813	INTEGER	read-create	Minimum size of a protocol frame that will be fragmented when transmitted with the Multilink protocol
INT pppConfigMLPMaxFragments	1.3.6.1.4.1.2637.2.1.1313.1.814	INTEGER	read-create	Maximum number of MLP fragments that a transmit frame will be divided into
BOO pppConfigMLPScaleFragments	1.3.6.1.4.1.2637.2.1.1313.1.815	Boolean	read-create	Should Multilink fragment sizes depend on the relative speed of the links?
BOO pppConfigMLPSendNullFragments	1.3.6.1.4.1.2637.2.1.1313.1.816	Boolean	read-create	Should Multilink periodically send null fragments to help the remote peer in discarding dead fragments?
INT pppConfigMLPNullFragmentTimeout	1.3.6.1.4.1.2637.2.1.1313.1.817	INTEGER	read-create	The amount of time (in seconds) between null Multilink fragments sent to the remote peer. This value is valid only if this feature is enabled.
INT pppConfigMLPEndpointDisc	1.3.6.1.4.1.2637.2.1.1313.1.818	INTEGER	read-create	Specifies the type of Endpoint Discriminator the CVX should send when negotiating Multilink. Specifying anything but the default (MAC address) can cause complete failures for remote users. Do not change this setting unless instructed to do so by a Nortel Networks employee.
INT pppConfigMLPGroupNumber	1.3.6.1.4.1.2637.2.1.1313.1.819	INTEGER	read-create	Multilink group number. This is valid only when the MLP endpoint discriminator type is set to GroupNumber. This should only be configured when you have been instructed to do so by a Nortel Networks employee.
BOO pppConfigLogEnabled	1.3.6.1.4.1.2637.2.1.1313.1.911	Boolean	read-create	Specifies whether PPP events should be logged
BOO pppConfigLogDump	1.3.6.1.4.1.2637.2.1.1313.1.912	Boolean	read-create	[Not implemented yet];
INT pppConfigLogSize	1.3.6.1.4.1.2637.2.1.1313.1.920	INTEGER	read-create	Number of events in the PPP log buffer. Each log event requires 24 bytes of memory; the default of 128 requires 3K of memory per call.
BOO pppConfigLogControlFrames	1.3.6.1.4.1.2637.2.1.1313.1.921	Boolean	read-create	If PPP logging is enabled, specifies whether transmitted and received control frames should be logged. Control frames include LCP and IPCP frames. This should always be on.
BOO pppConfigLogProtocolFrames	1.3.6.1.4.1.2637.2.1.1313.1.922	Boolean	read-create	If PPP logging is enabled, specifies whether transmitted and received protocol frames should be logged. Protocol frames include all IP frames (UDP, TCP, DNS, etc.). This should always be on.
BOO pppConfigLogOptions	1.3.6.1.4.1.2637.2.1.1313.1.923	Boolean	read-create	If PPP logging is enabled, specifies whether PPP negotiation options should be logged. This is particularly useful for diagnosing PPP connection problems.
BOO pppConfigLogStates	1.3.6.1.4.1.2637.2.1.1313.1.924	Boolean	read-create	If PPP logging is enabled, specifies whether PPP events and state transitions should be logged. This is sometimes useful in diagnosing PPP connection problems.
BOO pppConfigLogCompression	1.3.6.1.4.1.2637.2.1.1313.1.925	Boolean	read-create	If PPP logging is enabled, specifies whether PPP data compression events should be logged. This is useful in diagnosing compression performance problems.
BOO pppConfigLogMLP	1.3.6.1.4.1.2637.2.1.1313.1.926	Boolean	read-create	If PPP logging is enabled, specifies whether PPP Multilink events should be logged. This is useful in diagnosing multilink performance problems.
BOO pppConfigLogVJ	1.3.6.1.4.1.2637.2.1.1313.1.927	Boolean	read-create	If PPP logging is enabled, specifies whether PPP VJ header compression events should be logged. This is useful in diagnosing TCP/IP performance problems when VJ header compression is enabled and negotiated.
BOO pppConfigCCPEnabled	1.3.6.1.4.1.2637.2.1.1313.1.1011	Boolean	read-create	Specifies whether the Compression Control Protocol (RFC 1962) is enabled. Note that enabling CCP does not automatically cause the CVX to compress frames it transmits; that is controlled by the CompressFrames entry. This configuration was split into two options because many common client implementations of CCP can take over 30 seconds to connect when CCP is disabled. To get these clients to connect quickly, set CCPEnabled to 'true'. To prevent the CVX from actually compressing the data, set CompressFrames to 'false.'
BOO pppConfigCompressFrames	1.3.6.1.4.1.2637.2.1.1313.1.1012	Boolean	read-create	Compress transmitted frames when CCP has been negotiated. Set this to 'false' to prevent the CVX from compressing frames, even when CCP is enabled and negotiated successfully.
BOO pppConfigStac3Enabled	1.3.6.1.4.1.2637.2.1.1313.1.1013	Boolean	read-create	Stac check mode 3 (Sequence Number) enabled (RFC 1962)
BOO pppConfigStac4Enabled	1.3.6.1.4.1.2637.2.1.1313.1.1014	Boolean	read-create	Stac check mode 4 (Extended Mode) enabled (RFC 1962)
BOO pppConfigMPPCEnabled	1.3.6.1.4.1.2637.2.1.1313.1.1015	Boolean	read-create	Microsoft Point-to-Point Compression enabled (RFC 2118)
INT pppConfigStacPerformance	1.3.6.1.4.1.2637.2.1.1313.1.1016	INTEGER	read-create	Stac compression performance parameter
INT pppConfigStacMode	1.3.6.1.4.1.2637.2.1.1313.1.1017	INTEGER	read-create	Stac compression performance mode parameter
BOO pppConfigIPXCPEnabled	1.3.6.1.4.1.2637.2.1.1313.1.1111	Boolean	read-create	IPX Control Protocol enabled. For use with DVS tunnels only.
INT pppConfigIPXNetworkNumber	1.3.6.1.4.1.2637.2.1.1313.1.1112	INTEGER	read-create	IPX network number to assign to remote user. For use with DVS tunnels only.
STR pppConfigIPXNodeNumber	1.3.6.1.4.1.2637.2.1.1313.1.1113	DisplayString	read-create	IPX node number to assign to remote user. For use with DVS tunnels only.
pppModemConfigTable	1.3.6.1.4.1.2637.2.1.1314		not-accessible	PPP Modem Configuration Information.
pppModemConfigEntry	1.3.6.1.4.1.2637.2.1.1314.1		not-accessible	This is the structure of entries in the pppModemConfigTable.
STR pppModemConfigPathString	1.3.6.1.4.1.2637.2.1.1314.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW pppModemConfigRowStatus	1.3.6.1.4.1.2637.2.1.1314.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT pppModemConfigKeyValue	1.3.6.1.4.1.2637.2.1.1314.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT pppModemConfigEstablishTimeLimit	1.3.6.1.4.1.2637.2.1.1314.1.111	INTEGER	read-create	The amount of time allowed for initial LCP negotiation and authentication
INT pppModemConfigConnectLimit	1.3.6.1.4.1.2637.2.1.1314.1.112	INTEGER	read-create	Overall connection time limit (in minutes, 0 = no limit)
INT pppModemConfigInactivityLimit	1.3.6.1.4.1.2637.2.1.1314.1.113	INTEGER	read-create	Maximum inactivity time (in minutes) before user is disconnected (0 = no limit)
BOO pppModemConfigMonitorTxActivity	1.3.6.1.4.1.2637.2.1.1314.1.114	Boolean	read-create	If an inactivity limit is set, specifies whether transmitted packets (sent to the remote caller) should be monitored for activity. If set to false, then transmitted data is ignored, and cannot keep the call up.
BOO pppModemConfigMonitorRxActivity	1.3.6.1.4.1.2637.2.1.1314.1.115	Boolean	read-create	If an inactivity limit is set, specifies whether received packets (sent by the remote caller) should be monitored for activity. If set to false, then received data is ignored, and cannot keep the call up.
BOO pppModemConfigCountRIP	1.3.6.1.4.1.2637.2.1.1314.1.116	Boolean	read-create	Specifies whether RIP frames should count as activity, and thus should reset the inactivity timer
BOO pppModemConfigCountPings	1.3.6.1.4.1.2637.2.1.1314.1.117	Boolean	read-create	Specifies whether ICMP Echo Request and Echo Reply (ping) frames should count as activity, and thus should reset the inactivity timer
BOO pppModemConfigCountIGMP	1.3.6.1.4.1.2637.2.1.1314.1.118	Boolean	read-create	Specifies whether IGMP frames should count as activity, and thus should reset the inactivity timer
BOO pppModemConfigUseEchoes	1.3.6.1.4.1.2637.2.1.1314.1.211	Boolean	read-create	Send periodic LCP Echo-Request frames to detect dead links
BOO pppModemConfigSendID	1.3.6.1.4.1.2637.2.1.1314.1.212	Boolean	read-create	Send LCP Identification frame when LCP negotiation begins
BOO pppModemConfigSendTimeRemaining	1.3.6.1.4.1.2637.2.1.1314.1.213	Boolean	read-create	Send periodic LCP Time-Remaining frames to inform remote peer of connection time limit
BOO pppModemConfigSendMRU	1.3.6.1.4.1.2637.2.1.1314.1.311	Boolean	read-create	Include the Maximum-Receive-Unit option in transmitted LCP Configure-Request frames, informing remote peer of local MRU value
BOO pppModemConfigSendACCM	1.3.6.1.4.1.2637.2.1.1314.1.312	Boolean	read-create	Include the Asynchronous-Control-Character-Map option in transmitted LCP Configure-Request frames, informing remote peer of control characters it must escape when transmitting
BOO pppModemConfigSendMagic	1.3.6.1.4.1.2637.2.1.1314.1.313	Boolean	read-create	Include the Magic-Number option in transmitted LCP Configure-Request frames
BOO pppModemConfigSendPFC	1.3.6.1.4.1.2637.2.1.1314.1.314	Boolean	read-create	Include the Protocol-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting
BOO pppModemConfigSendACFC	1.3.6.1.4.1.2637.2.1.1314.1.315	Boolean	read-create	Include the Address-and-Control-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting, allowing the remote peer to omit the Address and Control fields when transmitting
BOO pppModemConfigSendShortSeq	1.3.6.1.4.1.2637.2.1.1314.1.316	Boolean	read-create	Include the Multilink Short Sequence Number option in transmitted LCP Configure-Request frames, allowing peer to transmit MLP frames with short (12-bit) sequence numbers
BOO pppModemConfigSendEndpointDisc	1.3.6.1.4.1.2637.2.1.1314.1.317	Boolean	read-create	Include the Multilink Endpoint Discriminator option in transmitted LCP Configure-Request frames
BOO pppModemConfigAllowMRU	1.3.6.1.4.1.2637.2.1.1314.1.321	Boolean	read-create	Allow the remote peer to specify its Maximum-Receive-Unit value in LCP Configure-Request frames it transmits
BOO pppModemConfigAllowACCM	1.3.6.1.4.1.2637.2.1.1314.1.322	Boolean	read-create	Allow the remote peer to include its Asynchronous-Control-Character-Map value in LCP Configure-Request frames its transmits
BOO pppModemConfigAllowMagic	1.3.6.1.4.1.2637.2.1.1314.1.323	Boolean	read-create	Allow the remote peer to include its Magic-Number value in LCP Configure-Request frames it transmits
BOO pppModemConfigAllowPFC	1.3.6.1.4.1.2637.2.1.1314.1.324	Boolean	read-create	Allow the remote peer to include the Protocol-Field-Compression option in LCP Configure-Request frames it transmits, allowing the local interface to compress the protocol field when transmitting
BOO pppModemConfigAllowACFC	1.3.6.1.4.1.2637.2.1.1314.1.325	Boolean	read-create	Allow the remote peer to include the Address-and-Control-Field-Compression option in LCP Configure-Request frames it transmits, allowing the remote peer to compress the protocol field when transmitting, allowing the local interface to omit the Address and Control fields when transmitting
BOO pppModemConfigAllowShortSeq	1.3.6.1.4.1.2637.2.1.1314.1.326	Boolean	read-create	Allow the peer to include the Multilink Short Sequence Number option in LCP Configure-Request frames it transmits, instructing the local interface to transmit MLP frames with short (12-bit) sequence numbers
BOO pppModemConfigAllowEndpointDisc	1.3.6.1.4.1.2637.2.1.1314.1.327	Boolean	read-create	Allow the remote peer to include the Multilink Endpoint Discriminator option in LCP Configure-Request frames it transmits
INT pppModemConfigLCPMaxConfigure	1.3.6.1.4.1.2637.2.1.1314.1.411	INTEGER	read-create	Max-Configure value for LCP negotiation
INT pppModemConfigLCPRestartTimer	1.3.6.1.4.1.2637.2.1.1314.1.412	INTEGER	read-create	Time (in milliseconds) between unanswered LCP Configure-Request frames
BOO pppModemConfigPassiveLCP	1.3.6.1.4.1.2637.2.1.1314.1.413	Boolean	read-create	Don't send an LCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
INT pppModemConfigPassiveLCPTimeout	1.3.6.1.4.1.2637.2.1.1314.1.414	INTEGER	read-create	The amount of time (in milliseconds) that LCP will wait for the peer to send a Configure-Request before sending one
INT pppModemConfigMinRemoteMRU	1.3.6.1.4.1.2637.2.1.1314.1.511	INTEGER	read-create	Minimum acceptable value for Max-Receive-Unit specified by remote peer
INT pppModemConfigMinLocalMRU	1.3.6.1.4.1.2637.2.1.1314.1.512	INTEGER	read-create	Minimum acceptable value for Max-Receive-Unit for local interface
INT pppModemConfigDesiredLocalMRU	1.3.6.1.4.1.2637.2.1.1314.1.513	INTEGER	read-create	Desired value for Max-Receive-Unit for local interface
INT pppModemConfigTransmitACCM	1.3.6.1.4.1.2637.2.1.1314.1.514	INTEGER	read-create	Required bits in transmit Async-Character-Control-Mask (specified in remote peer's Configure-Request)
INT pppModemConfigReceiveACCM	1.3.6.1.4.1.2637.2.1.1314.1.515	INTEGER	read-create	Required bits in receive Async-Character-Control-Mask (specified in local interface's Configure-Request)
INT pppModemConfigMinRemoteMRRU	1.3.6.1.4.1.2637.2.1.1314.1.516	INTEGER	read-create	Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer. If peer will not negotiate an MRRU this size or greater, then multilink will not be allowed.
INT pppModemConfigDesiredRemoteMRRU	1.3.6.1.4.1.2637.2.1.1314.1.517	INTEGER	read-create	Desired value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer
INT pppModemConfigMinLocalMRRU	1.3.6.1.4.1.2637.2.1.1314.1.518	INTEGER	read-create	Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit for local interface
INT pppModemConfigDesiredLocalMRRU	1.3.6.1.4.1.2637.2.1.1314.1.519	INTEGER	read-create	Desired value for Multilink Max-Reconstructed-Receive-Unit for local interface
INT pppModemConfigLCPEchoRetries	1.3.6.1.4.1.2637.2.1.1314.1.520	INTEGER	read-create	The number of unanswered LCP Echo-Requests transmitted before the link is declared dead
INT pppModemConfigLCPEchoTimeout	1.3.6.1.4.1.2637.2.1.1314.1.521	INTEGER	read-create	Time (in milliseconds) between answered LCP Echo-Request frames
INT pppModemConfigLCPEchoErrorTimeout	1.3.6.1.4.1.2637.2.1.1314.1.522	INTEGER	read-create	Time (in milliseconds) between unanswered LCP Echo-Request frames
INT pppModemConfigTimeRemainingInterval	1.3.6.1.4.1.2637.2.1.1314.1.523	INTEGER	read-create	Time (in milliseconds) between transmitted Time-Remaining frames
STR pppModemConfigIDText	1.3.6.1.4.1.2637.2.1.1314.1.524	DisplayString	read-create	Text sent in LCP Identification frame transmitted when LCP negotiation begins
BOO pppModemConfigAuthRequire	1.3.6.1.4.1.2637.2.1.1314.1.611	Boolean	read-create	Require authentication of remote peer
BOO pppModemConfigAuthAllow	1.3.6.1.4.1.2637.2.1.1314.1.612	Boolean	read-create	Allow remote peer to require authentication of local interface
INT pppModemConfigAuthServerProtocol1	1.3.6.1.4.1.2637.2.1.1314.1.620	INTEGER	read-create	1st preference for authentication protocol to use when authenticating the remote peer
INT pppModemConfigAuthServerProtocol2	1.3.6.1.4.1.2637.2.1.1314.1.621	INTEGER	read-create	2nd preference for authentication protocol to use when authenticating the remote peer
INT pppModemConfigAuthServerProtocol3	1.3.6.1.4.1.2637.2.1.1314.1.622	INTEGER	read-create	3rd preference for authentication protocol to use when authenticating the remote peer
INT pppModemConfigAuthServerProtocol4	1.3.6.1.4.1.2637.2.1.1314.1.623	INTEGER	read-create	4th preference for authentication protocol to use when authenticating the remote peer
INT pppModemConfigAuthClientProtocol1	1.3.6.1.4.1.2637.2.1.1314.1.631	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppModemConfigAuthClientProtocol2	1.3.6.1.4.1.2637.2.1.1314.1.632	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppModemConfigAuthClientProtocol3	1.3.6.1.4.1.2637.2.1.1314.1.633	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppModemConfigAuthClientProtocol4	1.3.6.1.4.1.2637.2.1.1314.1.634	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppModemConfigPAPClientRetries	1.3.6.1.4.1.2637.2.1.1314.1.641	INTEGER	read-create	Number of retries Password Authentication Protocol client will make when attempting to authenticate with the remote peer
INT pppModemConfigPAPClientTimeout	1.3.6.1.4.1.2637.2.1.1314.1.642	INTEGER	read-create	Time between transmitted Password Authentication Protocol Authenticate-Request frames
INT pppModemConfigPAPServerRetries	1.3.6.1.4.1.2637.2.1.1314.1.643	INTEGER	read-create	Number of authentication attempts granted to the remote peer when using the Password Authentication Protocol
INT pppModemConfigPAPServerTimeout	1.3.6.1.4.1.2637.2.1.1314.1.644	INTEGER	read-create	Not sure this applies...
INT pppModemConfigCHAPClientRetries	1.3.6.1.4.1.2637.2.1.1314.1.651	INTEGER	read-create	Number of retries the CHAP client will make when attempting to authenticate with the remote peer
INT pppModemConfigCHAPClientTimeout	1.3.6.1.4.1.2637.2.1.1314.1.652	INTEGER	read-create	Time between transmitted CHAP Response frames
INT pppModemConfigCHAPServerRetries	1.3.6.1.4.1.2637.2.1.1314.1.653	INTEGER	read-create	Number of authentication attempts granted to the remote peer when using CHAP
INT pppModemConfigCHAPServerChallenges	1.3.6.1.4.1.2637.2.1.1314.1.654	INTEGER	read-create	Number of unanswered Challenge frames sent to the remote peer when using CHAP
INT pppModemConfigCHAPServerTimeout	1.3.6.1.4.1.2637.2.1.1314.1.655	INTEGER	read-create	Time between transmitted CHAP Challenge frames
INT pppModemConfigCHAPValueLength	1.3.6.1.4.1.2637.2.1.1314.1.656	INTEGER	read-create	The length (in octets) of the CHAP Value sent to the remote user in CHAP Challenge frames. This number must be a factor of 4. Note that some RADIUS servers support only Challenge Values of 16 bytes, so this length should not be changed unless it is supported by the RADIUS server in use.
BOO pppModemConfigAuthFailureRenegotiatesLCP	1.3.6.1.4.1.2637.2.1.1314.1.657	Boolean	read-create	Determines what occurs after an authentication failure. If true, and if more than one authentication protocol is enabled (in AuthServerProtocol1, 2, etc.), then LCP is renegotiated with the second authentication protocol.
STR pppModemConfigUserName	1.3.6.1.4.1.2637.2.1.1314.1.661	DisplayString	read-create	User name used when attempting to authenticate with the remote peer
STR pppModemConfigPassword	1.3.6.1.4.1.2637.2.1.1314.1.662	DisplayString	read-create	Password used when attempting to authenticate with the remote peer
BOO pppModemConfigIPCPEnabled	1.3.6.1.4.1.2637.2.1.1314.1.711	Boolean	read-create	IP Control Protocol Enabled
IP pppModemConfigLocalIPAddress	1.3.6.1.4.1.2637.2.1.1314.1.712	IpAddress	read-create	IP address assigned to the local side of the PPP link
IP pppModemConfigRemoteIPAddress	1.3.6.1.4.1.2637.2.1.1314.1.713	IpAddress	read-create	IP address assigned to the remote peer of the PPP link
BOO pppModemConfigAllowPeerIPAddress	1.3.6.1.4.1.2637.2.1.1314.1.714	Boolean	read-create	Allow remote peer to specify its IP address. Note that if this option is enabled
BOO pppModemConfigVJEnabled	1.3.6.1.4.1.2637.2.1.1314.1.715	Boolean	read-create	Specifies whether Van Jacobson TCP/IP header compression (as specified in RFC 1144) should be negotiated. Due to bugs in some widely-available implementations, this option specifies whether VJ is enabled or disabled in both directions (compression and decompression).
INT pppModemConfigVJSlots	1.3.6.1.4.1.2637.2.1.1314.1.716	INTEGER	read-create	Specifies the number of Van Jacobson TCP/IP compression slots to use in each direction (compression and decompression). The default of 16 is strongly recommended, as many widely-available implementations do not interoperate when a different number is negotiated.
BOO pppModemConfigSendDNS	1.3.6.1.4.1.2637.2.1.1314.1.717	Boolean	read-create	Send configured Domain Name Server addresses to the remote peer, according to RFC 1877
BOO pppModemConfigSendNBNS	1.3.6.1.4.1.2637.2.1.1314.1.718	Boolean	read-create	Send configured NetBIOS Name Server addresses to the remote peer, according to RFC 1877
INT pppModemConfigIPCPMaxConfigure	1.3.6.1.4.1.2637.2.1.1314.1.719	INTEGER	read-create	Max-Configure value for IPCP negotiation
INT pppModemConfigIPCPRestartTimer	1.3.6.1.4.1.2637.2.1.1314.1.720	INTEGER	read-create	Time (in milliseconds) between unanswered IPCP Configure-Request frames
BOO pppModemConfigPassiveIPCP	1.3.6.1.4.1.2637.2.1.1314.1.721	Boolean	read-create	Don't send an IPCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
INT pppModemConfigPassiveIPCPTimeout	1.3.6.1.4.1.2637.2.1.1314.1.722	INTEGER	read-create	The amount of time (in milliseconds) that IPCP will wait for the peer to send a Configure-Request before sending one
IP pppModemConfigDNS1	1.3.6.1.4.1.2637.2.1.1314.1.723	IpAddress	read-create	Primary Doman Name Server address
IP pppModemConfigDNS2	1.3.6.1.4.1.2637.2.1.1314.1.724	IpAddress	read-create	Secondary Doman Name Server address
IP pppModemConfigNBNS1	1.3.6.1.4.1.2637.2.1.1314.1.725	IpAddress	read-create	Primary NetBIOS Name Server address
IP pppModemConfigNBNS2	1.3.6.1.4.1.2637.2.1.1314.1.726	IpAddress	read-create	Secondary NetBIOS Name Server address
INT pppModemConfigSendLocalIPAddress	1.3.6.1.4.1.2637.2.1.1314.1.727	INTEGER	read-create	Specifies when the local IP address should be send to the remote peer in an IPCP Configure-Request frame. If set to Requested, then the option is sent only if the remote peer requests it via a Configure-Nak option.
INT pppModemConfigPeerNSStrategy	1.3.6.1.4.1.2637.2.1.1314.1.729	INTEGER	read-create	Specifies how DNS/NBNS values suggested by peer will be handled. They will either be Config-Rejected (Reject), Config-Acked (Ack), or ignored and negotiated with Config-Nak with the configured values (Ignore).
BOO pppModemConfigMLPEnabled	1.3.6.1.4.1.2637.2.1.1314.1.811	Boolean	read-create	Multilink protocol (MLP) enabled
INT pppModemConfigMLPMaxLinks	1.3.6.1.4.1.2637.2.1.1314.1.812	INTEGER	read-create	Maximum number of links permitted in a Multilink bundle
INT pppModemConfigMLPFragmentSize	1.3.6.1.4.1.2637.2.1.1314.1.813	INTEGER	read-create	Minimum size of a protocol frame that will be fragmented when transmitted with the Multilink protocol
INT pppModemConfigMLPMaxFragments	1.3.6.1.4.1.2637.2.1.1314.1.814	INTEGER	read-create	Maximum number of MLP fragments that a transmit frame will be divided into
BOO pppModemConfigMLPScaleFragments	1.3.6.1.4.1.2637.2.1.1314.1.815	Boolean	read-create	Should Multilink fragment sizes depend on the relative speed of the links?
BOO pppModemConfigMLPSendNullFragments	1.3.6.1.4.1.2637.2.1.1314.1.816	Boolean	read-create	Should Multilink periodically send null fragments to help the remote peer in discarding dead fragments?
INT pppModemConfigMLPNullFragmentTimeout	1.3.6.1.4.1.2637.2.1.1314.1.817	INTEGER	read-create	The amount of time (in seconds) between null Multilink fragments sent to the remote peer. This value is valid only if this feature is enabled.
INT pppModemConfigMLPEndpointDisc	1.3.6.1.4.1.2637.2.1.1314.1.818	INTEGER	read-create	Specifies the type of Endpoint Discriminator the CVX should send when negotiating Multilink. Specifying anything but the default (MAC address) can cause complete failures for remote users. Do not change this setting unless instructed to do so by a Nortel Networks employee.
INT pppModemConfigMLPGroupNumber	1.3.6.1.4.1.2637.2.1.1314.1.819	INTEGER	read-create	Multilink group number. This is valid only when the MLP endpoint discriminator type is set to GroupNumber. This should only be configured when you have been instructed to do so by a Nortel Networks employee.
BOO pppModemConfigLogEnabled	1.3.6.1.4.1.2637.2.1.1314.1.911	Boolean	read-create	Specifies whether PPP events should be logged
BOO pppModemConfigLogDump	1.3.6.1.4.1.2637.2.1.1314.1.912	Boolean	read-create	[Not implemented yet];
INT pppModemConfigLogSize	1.3.6.1.4.1.2637.2.1.1314.1.920	INTEGER	read-create	Number of events in the PPP log buffer. Each log event requires 24 bytes of memory; the default of 128 requires 3K of memory per call.
BOO pppModemConfigLogControlFrames	1.3.6.1.4.1.2637.2.1.1314.1.921	Boolean	read-create	If PPP logging is enabled, specifies whether transmitted and received control frames should be logged. Control frames include LCP and IPCP frames. This should always be on.
BOO pppModemConfigLogProtocolFrames	1.3.6.1.4.1.2637.2.1.1314.1.922	Boolean	read-create	If PPP logging is enabled, specifies whether transmitted and received protocol frames should be logged. Protocol frames include all IP frames (UDP, TCP, DNS, etc.). This should always be on.
BOO pppModemConfigLogOptions	1.3.6.1.4.1.2637.2.1.1314.1.923	Boolean	read-create	If PPP logging is enabled, specifies whether PPP negotiation options should be logged. This is particularly useful for diagnosing PPP connection problems.
BOO pppModemConfigLogStates	1.3.6.1.4.1.2637.2.1.1314.1.924	Boolean	read-create	If PPP logging is enabled, specifies whether PPP events and state transitions should be logged. This is sometimes useful in diagnosing PPP connection problems.
BOO pppModemConfigLogCompression	1.3.6.1.4.1.2637.2.1.1314.1.925	Boolean	read-create	If PPP logging is enabled, specifies whether PPP data compression events should be logged. This is useful in diagnosing compression performance problems.
BOO pppModemConfigLogMLP	1.3.6.1.4.1.2637.2.1.1314.1.926	Boolean	read-create	If PPP logging is enabled, specifies whether PPP Multilink events should be logged. This is useful in diagnosing multilink performance problems.
BOO pppModemConfigLogVJ	1.3.6.1.4.1.2637.2.1.1314.1.927	Boolean	read-create	If PPP logging is enabled, specifies whether PPP VJ header compression events should be logged. This is useful in diagnosing TCP/IP performance problems when VJ header compression is enabled and negotiated.
BOO pppModemConfigCCPEnabled	1.3.6.1.4.1.2637.2.1.1314.1.1011	Boolean	read-create	Specifies whether the Compression Control Protocol (RFC 1962) is enabled. Note that enabling CCP does not automatically cause the CVX to compress frames it transmits; that is controlled by the CompressFrames entry. This configuration was split into two options because many common client implementations of CCP can take over 30 seconds to connect when CCP is disabled. To get these clients to connect quickly, set CCPEnabled to 'true'. To prevent the CVX from actually compressing the data, set CompressFrames to 'false.'
BOO pppModemConfigCompressFrames	1.3.6.1.4.1.2637.2.1.1314.1.1012	Boolean	read-create	Compress transmitted frames when CCP has been negotiated. Set this to 'false' to prevent the CVX from compressing frames, even when CCP is enabled and negotiated successfully.
BOO pppModemConfigStac3Enabled	1.3.6.1.4.1.2637.2.1.1314.1.1013	Boolean	read-create	Stac check mode 3 (Sequence Number) enabled (RFC 1962)
BOO pppModemConfigStac4Enabled	1.3.6.1.4.1.2637.2.1.1314.1.1014	Boolean	read-create	Stac check mode 4 (Extended Mode) enabled (RFC 1962)
BOO pppModemConfigMPPCEnabled	1.3.6.1.4.1.2637.2.1.1314.1.1015	Boolean	read-create	Microsoft Point-to-Point Compression enabled (RFC 2118)
INT pppModemConfigStacPerformance	1.3.6.1.4.1.2637.2.1.1314.1.1016	INTEGER	read-create	Stac compression performance parameter
INT pppModemConfigStacMode	1.3.6.1.4.1.2637.2.1.1314.1.1017	INTEGER	read-create	Stac compression performance mode parameter
BOO pppModemConfigIPXCPEnabled	1.3.6.1.4.1.2637.2.1.1314.1.1111	Boolean	read-create	IPX Control Protocol enabled. For use with DVS tunnels only.
INT pppModemConfigIPXNetworkNumber	1.3.6.1.4.1.2637.2.1.1314.1.1112	INTEGER	read-create	IPX network number to assign to remote user. For use with DVS tunnels only.
STR pppModemConfigIPXNodeNumber	1.3.6.1.4.1.2637.2.1.1314.1.1113	DisplayString	read-create	IPX node number to assign to remote user. For use with DVS tunnels only.
pppIsdnConfigTable	1.3.6.1.4.1.2637.2.1.1315		not-accessible	PPP ISDN Configuration Information.
pppIsdnConfigEntry	1.3.6.1.4.1.2637.2.1.1315.1		not-accessible	This is the structure of entries in the pppIsdnConfigTable.
STR pppIsdnConfigPathString	1.3.6.1.4.1.2637.2.1.1315.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW pppIsdnConfigRowStatus	1.3.6.1.4.1.2637.2.1.1315.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT pppIsdnConfigKeyValue	1.3.6.1.4.1.2637.2.1.1315.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT pppIsdnConfigEstablishTimeLimit	1.3.6.1.4.1.2637.2.1.1315.1.111	INTEGER	read-create	The amount of time allowed for initial LCP negotiation and authentication
INT pppIsdnConfigConnectLimit	1.3.6.1.4.1.2637.2.1.1315.1.112	INTEGER	read-create	Overall connection time limit (in minutes, 0 = no limit)
INT pppIsdnConfigInactivityLimit	1.3.6.1.4.1.2637.2.1.1315.1.113	INTEGER	read-create	Maximum inactivity time (in minutes) before user is disconnected (0 = no limit)
BOO pppIsdnConfigMonitorTxActivity	1.3.6.1.4.1.2637.2.1.1315.1.114	Boolean	read-create	If an inactivity limit is set, specifies whether transmitted packets (sent to the remote caller) should be monitored for activity. If set to false, then transmitted data is ignored, and cannot keep the call up.
BOO pppIsdnConfigMonitorRxActivity	1.3.6.1.4.1.2637.2.1.1315.1.115	Boolean	read-create	If an inactivity limit is set, specifies whether received packets (sent by the remote caller) should be monitored for activity. If set to false, then received data is ignored, and cannot keep the call up.
BOO pppIsdnConfigCountRIP	1.3.6.1.4.1.2637.2.1.1315.1.116	Boolean	read-create	Specifies whether RIP frames should count as activity, and thus should reset the inactivity timer
BOO pppIsdnConfigCountPings	1.3.6.1.4.1.2637.2.1.1315.1.117	Boolean	read-create	Specifies whether ICMP Echo Request and Echo Reply (ping) frames should count as activity, and thus should reset the inactivity timer
BOO pppIsdnConfigCountIGMP	1.3.6.1.4.1.2637.2.1.1315.1.118	Boolean	read-create	Specifies whether IGMP frames should count as activity, and thus should reset the inactivity timer
BOO pppIsdnConfigUseEchoes	1.3.6.1.4.1.2637.2.1.1315.1.211	Boolean	read-create	Send periodic LCP Echo-Request frames to detect dead links
BOO pppIsdnConfigSendID	1.3.6.1.4.1.2637.2.1.1315.1.212	Boolean	read-create	Send LCP Identification frame when LCP negotiation begins
BOO pppIsdnConfigSendTimeRemaining	1.3.6.1.4.1.2637.2.1.1315.1.213	Boolean	read-create	Send periodic LCP Time-Remaining frames to inform remote peer of connection time limit
BOO pppIsdnConfigSendMRU	1.3.6.1.4.1.2637.2.1.1315.1.311	Boolean	read-create	Include the Maximum-Receive-Unit option in transmitted LCP Configure-Request frames, informing remote peer of local MRU value
BOO pppIsdnConfigSendACCM	1.3.6.1.4.1.2637.2.1.1315.1.312	Boolean	read-create	Include the Asynchronous-Control-Character-Map option in transmitted LCP Configure-Request frames, informing remote peer of control characters it must escape when transmitting
BOO pppIsdnConfigSendMagic	1.3.6.1.4.1.2637.2.1.1315.1.313	Boolean	read-create	Include the Magic-Number option in transmitted LCP Configure-Request frames
BOO pppIsdnConfigSendPFC	1.3.6.1.4.1.2637.2.1.1315.1.314	Boolean	read-create	Include the Protocol-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting
BOO pppIsdnConfigSendACFC	1.3.6.1.4.1.2637.2.1.1315.1.315	Boolean	read-create	Include the Address-and-Control-Field-Compression option in transmitted LCP Configure-Request frames, allowing the remote peer to compress the protocol field when transmitting, allowing the remote peer to omit the Address and Control fields when transmitting
BOO pppIsdnConfigSendShortSeq	1.3.6.1.4.1.2637.2.1.1315.1.316	Boolean	read-create	Include the Multilink Short Sequence Number option in transmitted LCP Configure-Request frames, allowing peer to transmit MLP frames with short (12-bit) sequence numbers
BOO pppIsdnConfigSendEndpointDisc	1.3.6.1.4.1.2637.2.1.1315.1.317	Boolean	read-create	Include the Multilink Endpoint Discriminator option in transmitted LCP Configure-Request frames
BOO pppIsdnConfigAllowMRU	1.3.6.1.4.1.2637.2.1.1315.1.321	Boolean	read-create	Allow the remote peer to specify its Maximum-Receive-Unit value in LCP Configure-Request frames it transmits
BOO pppIsdnConfigAllowACCM	1.3.6.1.4.1.2637.2.1.1315.1.322	Boolean	read-create	Allow the remote peer to include its Asynchronous-Control-Character-Map value in LCP Configure-Request frames its transmits
BOO pppIsdnConfigAllowMagic	1.3.6.1.4.1.2637.2.1.1315.1.323	Boolean	read-create	Allow the remote peer to include its Magic-Number value in LCP Configure-Request frames it transmits
BOO pppIsdnConfigAllowPFC	1.3.6.1.4.1.2637.2.1.1315.1.324	Boolean	read-create	Allow the remote peer to include the Protocol-Field-Compression option in LCP Configure-Request frames it transmits, allowing the local interface to compress the protocol field when transmitting
BOO pppIsdnConfigAllowACFC	1.3.6.1.4.1.2637.2.1.1315.1.325	Boolean	read-create	Allow the remote peer to include the Address-and-Control-Field-Compression option in LCP Configure-Request frames it transmits, allowing the remote peer to compress the protocol field when transmitting, allowing the local interface to omit the Address and Control fields when transmitting
BOO pppIsdnConfigAllowShortSeq	1.3.6.1.4.1.2637.2.1.1315.1.326	Boolean	read-create	Allow the peer to include the Multilink Short Sequence Number option in LCP Configure-Request frames it transmits, instructing the local interface to transmit MLP frames with short (12-bit) sequence numbers
BOO pppIsdnConfigAllowEndpointDisc	1.3.6.1.4.1.2637.2.1.1315.1.327	Boolean	read-create	Allow the remote peer to include the Multilink Endpoint Discriminator option in LCP Configure-Request frames it transmits
INT pppIsdnConfigLCPMaxConfigure	1.3.6.1.4.1.2637.2.1.1315.1.411	INTEGER	read-create	Max-Configure value for LCP negotiation
INT pppIsdnConfigLCPRestartTimer	1.3.6.1.4.1.2637.2.1.1315.1.412	INTEGER	read-create	Time (in milliseconds) between unanswered LCP Configure-Request frames
BOO pppIsdnConfigPassiveLCP	1.3.6.1.4.1.2637.2.1.1315.1.413	Boolean	read-create	Don't send an LCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
INT pppIsdnConfigPassiveLCPTimeout	1.3.6.1.4.1.2637.2.1.1315.1.414	INTEGER	read-create	The amount of time (in milliseconds) that LCP will wait for the peer to send a Configure-Request before sending one
INT pppIsdnConfigMinRemoteMRU	1.3.6.1.4.1.2637.2.1.1315.1.511	INTEGER	read-create	Minimum acceptable value for Max-Receive-Unit specified by remote peer
INT pppIsdnConfigMinLocalMRU	1.3.6.1.4.1.2637.2.1.1315.1.512	INTEGER	read-create	Minimum acceptable value for Max-Receive-Unit for local interface
INT pppIsdnConfigDesiredLocalMRU	1.3.6.1.4.1.2637.2.1.1315.1.513	INTEGER	read-create	Desired value for Max-Receive-Unit for local interface
INT pppIsdnConfigTransmitACCM	1.3.6.1.4.1.2637.2.1.1315.1.514	INTEGER	read-create	Required bits in transmit Async-Character-Control-Mask (specified in remote peer's Configure-Request)
INT pppIsdnConfigReceiveACCM	1.3.6.1.4.1.2637.2.1.1315.1.515	INTEGER	read-create	Required bits in receive Async-Character-Control-Mask (specified in local interface's Configure-Request)
INT pppIsdnConfigMinRemoteMRRU	1.3.6.1.4.1.2637.2.1.1315.1.516	INTEGER	read-create	Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer. If peer will not negotiate an MRRU this size or greater, then multilink will not be allowed.
INT pppIsdnConfigDesiredRemoteMRRU	1.3.6.1.4.1.2637.2.1.1315.1.517	INTEGER	read-create	Desired value for Multilink Max-Reconstructed-Receive-Unit specified by remote peer
INT pppIsdnConfigMinLocalMRRU	1.3.6.1.4.1.2637.2.1.1315.1.518	INTEGER	read-create	Minimum acceptable value for Multilink Max-Reconstructed-Receive-Unit for local interface
INT pppIsdnConfigDesiredLocalMRRU	1.3.6.1.4.1.2637.2.1.1315.1.519	INTEGER	read-create	Desired value for Multilink Max-Reconstructed-Receive-Unit for local interface
INT pppIsdnConfigLCPEchoRetries	1.3.6.1.4.1.2637.2.1.1315.1.520	INTEGER	read-create	The number of unanswered LCP Echo-Requests transmitted before the link is declared dead
INT pppIsdnConfigLCPEchoTimeout	1.3.6.1.4.1.2637.2.1.1315.1.521	INTEGER	read-create	Time (in milliseconds) between answered LCP Echo-Request frames
INT pppIsdnConfigLCPEchoErrorTimeout	1.3.6.1.4.1.2637.2.1.1315.1.522	INTEGER	read-create	Time (in milliseconds) between unanswered LCP Echo-Request frames
INT pppIsdnConfigTimeRemainingInterval	1.3.6.1.4.1.2637.2.1.1315.1.523	INTEGER	read-create	Time (in milliseconds) between transmitted Time-Remaining frames
STR pppIsdnConfigIDText	1.3.6.1.4.1.2637.2.1.1315.1.524	DisplayString	read-create	Text sent in LCP Identification frame transmitted when LCP negotiation begins
BOO pppIsdnConfigAuthRequire	1.3.6.1.4.1.2637.2.1.1315.1.611	Boolean	read-create	Require authentication of remote peer
BOO pppIsdnConfigAuthAllow	1.3.6.1.4.1.2637.2.1.1315.1.612	Boolean	read-create	Allow remote peer to require authentication of local interface
INT pppIsdnConfigAuthServerProtocol1	1.3.6.1.4.1.2637.2.1.1315.1.620	INTEGER	read-create	1st preference for authentication protocol to use when authenticating the remote peer
INT pppIsdnConfigAuthServerProtocol2	1.3.6.1.4.1.2637.2.1.1315.1.621	INTEGER	read-create	2nd preference for authentication protocol to use when authenticating the remote peer
INT pppIsdnConfigAuthServerProtocol3	1.3.6.1.4.1.2637.2.1.1315.1.622	INTEGER	read-create	3rd preference for authentication protocol to use when authenticating the remote peer
INT pppIsdnConfigAuthServerProtocol4	1.3.6.1.4.1.2637.2.1.1315.1.623	INTEGER	read-create	4th preference for authentication protocol to use when authenticating the remote peer
INT pppIsdnConfigAuthClientProtocol1	1.3.6.1.4.1.2637.2.1.1315.1.631	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppIsdnConfigAuthClientProtocol2	1.3.6.1.4.1.2637.2.1.1315.1.632	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppIsdnConfigAuthClientProtocol3	1.3.6.1.4.1.2637.2.1.1315.1.633	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppIsdnConfigAuthClientProtocol4	1.3.6.1.4.1.2637.2.1.1315.1.634	INTEGER	read-create	A protocol that is acceptable for use when authenticating with the remote peer
INT pppIsdnConfigPAPClientRetries	1.3.6.1.4.1.2637.2.1.1315.1.641	INTEGER	read-create	Number of retries Password Authentication Protocol client will make when attempting to authenticate with the remote peer
INT pppIsdnConfigPAPClientTimeout	1.3.6.1.4.1.2637.2.1.1315.1.642	INTEGER	read-create	Time between transmitted Password Authentication Protocol Authenticate-Request frames
INT pppIsdnConfigPAPServerRetries	1.3.6.1.4.1.2637.2.1.1315.1.643	INTEGER	read-create	Number of authentication attempts granted to the remote peer when using the Password Authentication Protocol
INT pppIsdnConfigPAPServerTimeout	1.3.6.1.4.1.2637.2.1.1315.1.644	INTEGER	read-create	Not sure this applies...
INT pppIsdnConfigCHAPClientRetries	1.3.6.1.4.1.2637.2.1.1315.1.651	INTEGER	read-create	Number of retries the CHAP client will make when attempting to authenticate with the remote peer
INT pppIsdnConfigCHAPClientTimeout	1.3.6.1.4.1.2637.2.1.1315.1.652	INTEGER	read-create	Time between transmitted CHAP Response frames
INT pppIsdnConfigCHAPServerRetries	1.3.6.1.4.1.2637.2.1.1315.1.653	INTEGER	read-create	Number of authentication attempts granted to the remote peer when using CHAP
INT pppIsdnConfigCHAPServerChallenges	1.3.6.1.4.1.2637.2.1.1315.1.654	INTEGER	read-create	Number of unanswered Challenge frames sent to the remote peer when using CHAP
INT pppIsdnConfigCHAPServerTimeout	1.3.6.1.4.1.2637.2.1.1315.1.655	INTEGER	read-create	Time between transmitted CHAP Challenge frames
INT pppIsdnConfigCHAPValueLength	1.3.6.1.4.1.2637.2.1.1315.1.656	INTEGER	read-create	The length (in octets) of the CHAP Value sent to the remote user in CHAP Challenge frames. This number must be a factor of 4. Note that some RADIUS servers support only Challenge Values of 16 bytes, so this length should not be changed unless it is supported by the RADIUS server in use.
BOO pppIsdnConfigAuthFailureRenegotiatesLCP	1.3.6.1.4.1.2637.2.1.1315.1.657	Boolean	read-create	Determines what occurs after an authentication failure. If true, and if more than one authentication protocol is enabled (in AuthServerProtocol1, 2, etc.), then LCP is renegotiated with the second authentication protocol.
STR pppIsdnConfigUserName	1.3.6.1.4.1.2637.2.1.1315.1.661	DisplayString	read-create	User name used when attempting to authenticate with the remote peer
STR pppIsdnConfigPassword	1.3.6.1.4.1.2637.2.1.1315.1.662	DisplayString	read-create	Password used when attempting to authenticate with the remote peer
BOO pppIsdnConfigIPCPEnabled	1.3.6.1.4.1.2637.2.1.1315.1.711	Boolean	read-create	IP Control Protocol Enabled
IP pppIsdnConfigLocalIPAddress	1.3.6.1.4.1.2637.2.1.1315.1.712	IpAddress	read-create	IP address assigned to the local side of the PPP link
IP pppIsdnConfigRemoteIPAddress	1.3.6.1.4.1.2637.2.1.1315.1.713	IpAddress	read-create	IP address assigned to the remote peer of the PPP link
BOO pppIsdnConfigAllowPeerIPAddress	1.3.6.1.4.1.2637.2.1.1315.1.714	Boolean	read-create	Allow remote peer to specify its IP address. Note that if this option is enabled
BOO pppIsdnConfigVJEnabled	1.3.6.1.4.1.2637.2.1.1315.1.715	Boolean	read-create	Specifies whether Van Jacobson TCP/IP header compression (as specified in RFC 1144) should be negotiated. Due to bugs in some widely-available implementations, this option specifies whether VJ is enabled or disabled in both directions (compression and decompression).
INT pppIsdnConfigVJSlots	1.3.6.1.4.1.2637.2.1.1315.1.716	INTEGER	read-create	Specifies the number of Van Jacobson TCP/IP compression slots to use in each direction (compression and decompression). The default of 16 is strongly recommended, as many widely-available implementations do not interoperate when a different number is negotiated.
BOO pppIsdnConfigSendDNS	1.3.6.1.4.1.2637.2.1.1315.1.717	Boolean	read-create	Send configured Domain Name Server addresses to the remote peer, according to RFC 1877
BOO pppIsdnConfigSendNBNS	1.3.6.1.4.1.2637.2.1.1315.1.718	Boolean	read-create	Send configured NetBIOS Name Server addresses to the remote peer, according to RFC 1877
INT pppIsdnConfigIPCPMaxConfigure	1.3.6.1.4.1.2637.2.1.1315.1.719	INTEGER	read-create	Max-Configure value for IPCP negotiation
INT pppIsdnConfigIPCPRestartTimer	1.3.6.1.4.1.2637.2.1.1315.1.720	INTEGER	read-create	Time (in milliseconds) between unanswered IPCP Configure-Request frames
BOO pppIsdnConfigPassiveIPCP	1.3.6.1.4.1.2637.2.1.1315.1.721	Boolean	read-create	Don't send an IPCP Configure-Request frame until either the peer has sent one, or a short timeout has expired
INT pppIsdnConfigPassiveIPCPTimeout	1.3.6.1.4.1.2637.2.1.1315.1.722	INTEGER	read-create	The amount of time (in milliseconds) that IPCP will wait for the peer to send a Configure-Request before sending one
IP pppIsdnConfigDNS1	1.3.6.1.4.1.2637.2.1.1315.1.723	IpAddress	read-create	Primary Doman Name Server address
IP pppIsdnConfigDNS2	1.3.6.1.4.1.2637.2.1.1315.1.724	IpAddress	read-create	Secondary Doman Name Server address
IP pppIsdnConfigNBNS1	1.3.6.1.4.1.2637.2.1.1315.1.725	IpAddress	read-create	Primary NetBIOS Name Server address
IP pppIsdnConfigNBNS2	1.3.6.1.4.1.2637.2.1.1315.1.726	IpAddress	read-create	Secondary NetBIOS Name Server address
INT pppIsdnConfigSendLocalIPAddress	1.3.6.1.4.1.2637.2.1.1315.1.727	INTEGER	read-create	Specifies when the local IP address should be send to the remote peer in an IPCP Configure-Request frame. If set to Requested, then the option is sent only if the remote peer requests it via a Configure-Nak option.
INT pppIsdnConfigPeerNSStrategy	1.3.6.1.4.1.2637.2.1.1315.1.729	INTEGER	read-create	Specifies how DNS/NBNS values suggested by peer will be handled. They will either be Config-Rejected (Reject), Config-Acked (Ack), or ignored and negotiated with Config-Nak with the configured values (Ignore).
BOO pppIsdnConfigMLPEnabled	1.3.6.1.4.1.2637.2.1.1315.1.811	Boolean	read-create	Multilink protocol (MLP) enabled
INT pppIsdnConfigMLPMaxLinks	1.3.6.1.4.1.2637.2.1.1315.1.812	INTEGER	read-create	Maximum number of links permitted in a Multilink bundle
INT pppIsdnConfigMLPFragmentSize	1.3.6.1.4.1.2637.2.1.1315.1.813	INTEGER	read-create	Minimum size of a protocol frame that will be fragmented when transmitted with the Multilink protocol
INT pppIsdnConfigMLPMaxFragments	1.3.6.1.4.1.2637.2.1.1315.1.814	INTEGER	read-create	Maximum number of MLP fragments that a transmit frame will be divided into
BOO pppIsdnConfigMLPScaleFragments	1.3.6.1.4.1.2637.2.1.1315.1.815	Boolean	read-create	Should Multilink fragment sizes depend on the relative speed of the links?
BOO pppIsdnConfigMLPSendNullFragments	1.3.6.1.4.1.2637.2.1.1315.1.816	Boolean	read-create	Should Multilink periodically send null fragments to help the remote peer in discarding dead fragments?
INT pppIsdnConfigMLPNullFragmentTimeout	1.3.6.1.4.1.2637.2.1.1315.1.817	INTEGER	read-create	The amount of time (in seconds) between null Multilink fragments sent to the remote peer. This value is valid only if this feature is enabled.
INT pppIsdnConfigMLPEndpointDisc	1.3.6.1.4.1.2637.2.1.1315.1.818	INTEGER	read-create	Specifies the type of Endpoint Discriminator the CVX should send when negotiating Multilink. Specifying anything but the default (MAC address) can cause complete failures for remote users. Do not change this setting unless instructed to do so by a Nortel Networks employee.
INT pppIsdnConfigMLPGroupNumber	1.3.6.1.4.1.2637.2.1.1315.1.819	INTEGER	read-create	Multilink group number. This is valid only when the MLP endpoint discriminator type is set to GroupNumber. This should only be configured when you have been instructed to do so by a Nortel Networks employee.
BOO pppIsdnConfigLogEnabled	1.3.6.1.4.1.2637.2.1.1315.1.911	Boolean	read-create	Specifies whether PPP events should be logged
BOO pppIsdnConfigLogDump	1.3.6.1.4.1.2637.2.1.1315.1.912	Boolean	read-create	[Not implemented yet];
INT pppIsdnConfigLogSize	1.3.6.1.4.1.2637.2.1.1315.1.920	INTEGER	read-create	Number of events in the PPP log buffer. Each log event requires 24 bytes of memory; the default of 128 requires 3K of memory per call.
BOO pppIsdnConfigLogControlFrames	1.3.6.1.4.1.2637.2.1.1315.1.921	Boolean	read-create	If PPP logging is enabled, specifies whether transmitted and received control frames should be logged. Control frames include LCP and IPCP frames. This should always be on.
BOO pppIsdnConfigLogProtocolFrames	1.3.6.1.4.1.2637.2.1.1315.1.922	Boolean	read-create	If PPP logging is enabled, specifies whether transmitted and received protocol frames should be logged. Protocol frames include all IP frames (UDP, TCP, DNS, etc.). This should always be on.
BOO pppIsdnConfigLogOptions	1.3.6.1.4.1.2637.2.1.1315.1.923	Boolean	read-create	If PPP logging is enabled, specifies whether PPP negotiation options should be logged. This is particularly useful for diagnosing PPP connection problems.
BOO pppIsdnConfigLogStates	1.3.6.1.4.1.2637.2.1.1315.1.924	Boolean	read-create	If PPP logging is enabled, specifies whether PPP events and state transitions should be logged. This is sometimes useful in diagnosing PPP connection problems.
BOO pppIsdnConfigLogCompression	1.3.6.1.4.1.2637.2.1.1315.1.925	Boolean	read-create	If PPP logging is enabled, specifies whether PPP data compression events should be logged. This is useful in diagnosing compression performance problems.
BOO pppIsdnConfigLogMLP	1.3.6.1.4.1.2637.2.1.1315.1.926	Boolean	read-create	If PPP logging is enabled, specifies whether PPP Multilink events should be logged. This is useful in diagnosing multilink performance problems.
BOO pppIsdnConfigLogVJ	1.3.6.1.4.1.2637.2.1.1315.1.927	Boolean	read-create	If PPP logging is enabled, specifies whether PPP VJ header compression events should be logged. This is useful in diagnosing TCP/IP performance problems when VJ header compression is enabled and negotiated.
BOO pppIsdnConfigCCPEnabled	1.3.6.1.4.1.2637.2.1.1315.1.1011	Boolean	read-create	Specifies whether the Compression Control Protocol (RFC 1962) is enabled. Note that enabling CCP does not automatically cause the CVX to compress frames it transmits; that is controlled by the CompressFrames entry. This configuration was split into two options because many common client implementations of CCP can take over 30 seconds to connect when CCP is disabled. To get these clients to connect quickly, set CCPEnabled to 'true'. To prevent the CVX from actually compressing the data, set CompressFrames to 'false.'
BOO pppIsdnConfigCompressFrames	1.3.6.1.4.1.2637.2.1.1315.1.1012	Boolean	read-create	Compress transmitted frames when CCP has been negotiated. Set this to 'false' to prevent the CVX from compressing frames, even when CCP is enabled and negotiated successfully.
BOO pppIsdnConfigStac3Enabled	1.3.6.1.4.1.2637.2.1.1315.1.1013	Boolean	read-create	Stac check mode 3 (Sequence Number) enabled (RFC 1962)
BOO pppIsdnConfigStac4Enabled	1.3.6.1.4.1.2637.2.1.1315.1.1014	Boolean	read-create	Stac check mode 4 (Extended Mode) enabled (RFC 1962)
BOO pppIsdnConfigMPPCEnabled	1.3.6.1.4.1.2637.2.1.1315.1.1015	Boolean	read-create	Microsoft Point-to-Point Compression enabled (RFC 2118)
INT pppIsdnConfigStacPerformance	1.3.6.1.4.1.2637.2.1.1315.1.1016	INTEGER	read-create	Stac compression performance parameter
INT pppIsdnConfigStacMode	1.3.6.1.4.1.2637.2.1.1315.1.1017	INTEGER	read-create	Stac compression performance mode parameter
BOO pppIsdnConfigIPXCPEnabled	1.3.6.1.4.1.2637.2.1.1315.1.1111	Boolean	read-create	IPX Control Protocol enabled. For use with DVS tunnels only.
INT pppIsdnConfigIPXNetworkNumber	1.3.6.1.4.1.2637.2.1.1315.1.1112	INTEGER	read-create	IPX network number to assign to remote user. For use with DVS tunnels only.
STR pppIsdnConfigIPXNodeNumber	1.3.6.1.4.1.2637.2.1.1315.1.1113	DisplayString	read-create	IPX node number to assign to remote user. For use with DVS tunnels only.
l2FHomeGatewayTable	1.3.6.1.4.1.2637.2.1.1350		not-accessible	Layer-2 Forwarding Home Gateway Information.
l2FHomeGatewayEntry	1.3.6.1.4.1.2637.2.1.1350.1		not-accessible	This is the structure of entries in the l2FHomeGatewayTable.
STR l2FHomeGatewayPathString	1.3.6.1.4.1.2637.2.1.1350.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW l2FHomeGatewayRowStatus	1.3.6.1.4.1.2637.2.1.1350.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT l2FHomeGatewayKeyValue	1.3.6.1.4.1.2637.2.1.1350.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP l2FHomeGatewayIPAddress	1.3.6.1.4.1.2637.2.1.1350.1.11	IpAddress	read-create	IP address of L2F Home Gateway
STR l2FHomeGatewayHostName	1.3.6.1.4.1.2637.2.1.1350.1.12	DisplayString	read-create	Fully Qualified Domain Name (DNS name) of L2F Home Gateway
STR l2FHomeGatewaySendName	1.3.6.1.4.1.2637.2.1.1350.1.211	DisplayString	read-create	Name to send as the NAS name in the L2F CONF packet to open a tunnel
STR l2FHomeGatewaySendPassword	1.3.6.1.4.1.2637.2.1.1350.1.212	DisplayString	read-create	Password to send to the Home Gateway when sending the L2F OPEN packet to open a tunnel
STR l2FHomeGatewayReceiveName	1.3.6.1.4.1.2637.2.1.1350.1.213	DisplayString	read-create	Name to expect from the Home Gateway in the received L2F CONF packet when opening a tunnel. If left blank, then the Home Gateway's password will not be checked.
STR l2FHomeGatewayReceivePassword	1.3.6.1.4.1.2637.2.1.1350.1.214	DisplayString	read-create	Password to expect from the Home Gateway when opening a tunnel. If left blank, then the Home Gateway's password will not be checked.
BOO l2FHomeGatewaySendChecksum	1.3.6.1.4.1.2637.2.1.1350.1.313	Boolean	read-create	Include Checksum field in transmitted L2F frames
BOO l2FHomeGatewayCheckChecksum	1.3.6.1.4.1.2637.2.1.1350.1.314	Boolean	read-create	Check Checksum field in received L2F frames
BOO l2FHomeGatewaySendUDPChecksum	1.3.6.1.4.1.2637.2.1.1350.1.315	Boolean	read-create	Calculate and include UDP checksum in transmitted L2F frames
INT l2FHomeGatewayEchoInterval	1.3.6.1.4.1.2637.2.1.1350.1.411	INTEGER	read-create	Time (in seconds) between L2F Echo Request frames sent to the Home Gateway to determine if it is still responding. These frames will only be sent when no packets are received from the Home Gateway. 0 indicates that Echo frames will not be used to determine if the Home Gateway is responding.
INT l2FHomeGatewayEchoRetries	1.3.6.1.4.1.2637.2.1.1350.1.412	INTEGER	read-create	The number of unanswered L2F Echo Request frames that will be sent to the Home Gateway before declaring the tunnel dead.
macConfigTable	1.3.6.1.4.1.2637.2.1.1401		not-accessible	MAC Configuration Information.
macConfigEntry	1.3.6.1.4.1.2637.2.1.1401.1		not-accessible	This is the structure of entries in the macConfigTable.
STR macConfigPathString	1.3.6.1.4.1.2637.2.1.1401.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW macConfigRowStatus	1.3.6.1.4.1.2637.2.1.1401.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT macConfigKeyValue	1.3.6.1.4.1.2637.2.1.1401.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT macConfigAdminState	1.3.6.1.4.1.2637.2.1.1401.1.11	INTEGER	read-create	MAC Configuration adminState.
modemConfigTable	1.3.6.1.4.1.2637.2.1.1421		not-accessible	Modem Configuration Information.
modemConfigEntry	1.3.6.1.4.1.2637.2.1.1421.1		not-accessible	This is the structure of entries in the modemConfigTable.
STR modemConfigPathString	1.3.6.1.4.1.2637.2.1.1421.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW modemConfigRowStatus	1.3.6.1.4.1.2637.2.1.1421.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT modemConfigKeyValue	1.3.6.1.4.1.2637.2.1.1421.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR modemConfigAnswerString	1.3.6.1.4.1.2637.2.1.1421.1.111	DisplayString	read-create	The AT command string sent to the modem to configure it and instruct it to answer an incoming call
STR modemConfigCallString	1.3.6.1.4.1.2637.2.1.1421.1.112	DisplayString	read-create	The AT command string sent to the modem to configure it and instruct it to place an outgoing call
STR modemConfigPhoneNumber	1.3.6.1.4.1.2637.2.1.1421.1.113	DisplayString	read-create	The phone number to dial when placing an outgoing call
INT modemConfigMinConnectSpeed	1.3.6.1.4.1.2637.2.1.1421.1.211	INTEGER	read-create	The minimum speed (in bits/second) at which the modem will connect
INT modemConfigMaxConnectSpeed	1.3.6.1.4.1.2637.2.1.1421.1.212	INTEGER	read-create	The maximum speed (in bits/second) at which the modem will connect
INT modemConfigFlowControl	1.3.6.1.4.1.2637.2.1.1421.1.311	INTEGER	read-create	Type of flow control to use when communicating with modem
INT modemConfigConnectTimeout	1.3.6.1.4.1.2637.2.1.1421.1.411	INTEGER	read-create	The time allowed for the modem to negotiate a connection with the remote modem
BOO modemConfigDetectProtocol	1.3.6.1.4.1.2637.2.1.1421.1.511	Boolean	read-create	True if the modem attempt to detect the protocol (PPP, command shell, etc.) used by the remote caller; false if the modem should assume the default protocol.
INT modemConfigDetectDefault	1.3.6.1.4.1.2637.2.1.1421.1.512	INTEGER	read-create	The default protocol the modem should assume if either 1) it fails to detect the remote caller's protocol, or 2) detection is turned off in the configuration.
INT modemConfigDetectTimeout	1.3.6.1.4.1.2637.2.1.1421.1.513	INTEGER	read-create	The time (in milliseconds) that the modem should wait while detecting the protocol used by the remote caller before giving up and using the configured default.
INT modemConfigVoicePcmCoding	1.3.6.1.4.1.2637.2.1.1421.1.711	INTEGER	read-create	PCM coding standard
INT modemConfigVoiceSilenceHandling	1.3.6.1.4.1.2637.2.1.1421.1.712	INTEGER	read-create	Silence handling during voice call
INT modemConfigVoiceFrameGeneration	1.3.6.1.4.1.2637.2.1.1421.1.713	INTEGER	read-create	Frame generation during calls
INT modemConfigVoiceG723Rate	1.3.6.1.4.1.2637.2.1.1421.1.714	INTEGER	read-create	G.723 bit sampling rate
INT modemConfigVoiceAdaptivePostfilter	1.3.6.1.4.1.2637.2.1.1421.1.715	INTEGER	read-create	Voice adaptive postfilter
INT modemConfigVoiceActivityDetect	1.3.6.1.4.1.2637.2.1.1421.1.716	INTEGER	read-create	Voice activity detector
INT modemConfigVoicePacketInterval	1.3.6.1.4.1.2637.2.1.1421.1.717	INTEGER	read-create	RTP packet sample size
INT modemConfigVoiceDtmfVoice	1.3.6.1.4.1.2637.2.1.1421.1.718	INTEGER	read-create	DTMF tones in voice channel
INT modemConfigVoiceDtmfPayloads	1.3.6.1.4.1.2637.2.1.1421.1.719	INTEGER	read-create	DTMF tones in payloads
INT modemConfigVoiceDtmfPayloadType	1.3.6.1.4.1.2637.2.1.1421.1.720	INTEGER	read-create	DTMF Payload type
INT modemConfigVoiceDtmfRedundantType	1.3.6.1.4.1.2637.2.1.1421.1.721	INTEGER	read-create	DTMF redundant audio scheme type
INT modemConfigVoiceDgainPackettoPCM	1.3.6.1.4.1.2637.2.1.1421.1.722	INTEGER	read-create	Digital gain for IP packet to PCM
INT modemConfigVoiceDgainPCMtoPacket	1.3.6.1.4.1.2637.2.1.1421.1.723	INTEGER	read-create	Digital gain for PCM to IP packet
INT modemConfigVoiceEchoTail	1.3.6.1.4.1.2637.2.1.1421.1.724	INTEGER	read-create	Echo canceller tail length
INT modemConfigVoiceEchoRxMute	1.3.6.1.4.1.2637.2.1.1421.1.725	INTEGER	read-create	Echo canceller receive mute
INT modemConfigVoiceEchoTxMute	1.3.6.1.4.1.2637.2.1.1421.1.726	INTEGER	read-create	Echo canceller transmit mute
INT modemConfigVoiceEchoTxFixedGain	1.3.6.1.4.1.2637.2.1.1421.1.727	INTEGER	read-create	Echo canceller fixed transmit gain
INT modemConfigVoiceEchoCoeffFreeze	1.3.6.1.4.1.2637.2.1.1421.1.728	INTEGER	read-create	Echo canceller Coefficient freeze
INT modemConfigVoiceEchoReset	1.3.6.1.4.1.2637.2.1.1421.1.729	INTEGER	read-create	Hardware echo canceller reset
INT modemConfigVoiceEchoDisable	1.3.6.1.4.1.2637.2.1.1421.1.730	INTEGER	read-create	Hardware echo canceller disable
INT modemConfigVoiceEchoMasterEnable	1.3.6.1.4.1.2637.2.1.1421.1.731	INTEGER	read-create	Master echo canceller enable
INT modemConfigVoiceLatePacketMax	1.3.6.1.4.1.2637.2.1.1421.1.732	INTEGER	read-create	Late packet maximum delay
INT modemConfigVoiceLatePacketMin	1.3.6.1.4.1.2637.2.1.1421.1.733	INTEGER	read-create	Late Packet minimum delay
INT modemConfigVoiceLatePacketWin	1.3.6.1.4.1.2637.2.1.1421.1.734	INTEGER	read-create	Initial late packet window
INT modemConfigVoiceLatePacketRatio	1.3.6.1.4.1.2637.2.1.1421.1.735	INTEGER	read-create	Late packet quality ratio
INT modemConfigVoiceFaxModemAutoswitch	1.3.6.1.4.1.2637.2.1.1421.1.736	INTEGER	read-create	Fax/Modem autoswitch
INT modemConfigVoicePayloadTypeAutoswitch	1.3.6.1.4.1.2637.2.1.1421.1.737	INTEGER	read-create	Payload type autoswitch
INT modemConfigVoiceAutoswitchPacketSize	1.3.6.1.4.1.2637.2.1.1421.1.738	INTEGER	read-create	Payload Autoswitch size
INT modemConfigVoiceNoPathTeardown	1.3.6.1.4.1.2637.2.1.1421.1.739	INTEGER	read-create	No voice path teardown
INT modemConfigVoiceRtcpPeriod	1.3.6.1.4.1.2637.2.1.1421.1.740	INTEGER	read-create	RTCP packet interval
INT modemConfigVoiceStatsPeriod	1.3.6.1.4.1.2637.2.1.1421.1.741	INTEGER	read-create	Statistic update period
INT modemConfigVoiceDspPatch	1.3.6.1.4.1.2637.2.1.1421.1.750	INTEGER	read-create	Enables dsp patch for conexant voice codecs
OCT modemConfigVoiceDspPatchString	1.3.6.1.4.1.2637.2.1.1421.1.751	OCTET STRING	read-create	Patch string parsed and sent to Conexant dsp
iopConfigTable	1.3.6.1.4.1.2637.2.1.1431		not-accessible	IOP (Input/Output Processor) Configuration Information.
iopConfigEntry	1.3.6.1.4.1.2637.2.1.1431.1		not-accessible	This is the structure of entries in the iopConfigTable.
STR iopConfigPathString	1.3.6.1.4.1.2637.2.1.1431.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW iopConfigRowStatus	1.3.6.1.4.1.2637.2.1.1431.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT iopConfigKeyValue	1.3.6.1.4.1.2637.2.1.1431.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT iopConfigAdminState	1.3.6.1.4.1.2637.2.1.1431.1.11	INTEGER	read-create	IOP Configuration adminState.
STR iopConfigIOPImageName	1.3.6.1.4.1.2637.2.1.1431.1.112	DisplayString	read-create	Name of the code image file that should be loaded into the IOP's memory
STR iopConfigModemImageName	1.3.6.1.4.1.2637.2.1.1431.1.113	DisplayString	read-create	Name of the code image file that should be loaded into the modems' memory
dmmAdminConfigTable	1.3.6.1.4.1.2637.2.1.1441		not-accessible	DMM (Digital Modem Module) Configuration Information.
dmmAdminConfigEntry	1.3.6.1.4.1.2637.2.1.1441.1		not-accessible	This is the structure of entries in the dmmAdminConfigTable.
STR dmmAdminConfigPathString	1.3.6.1.4.1.2637.2.1.1441.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW dmmAdminConfigRowStatus	1.3.6.1.4.1.2637.2.1.1441.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT dmmAdminConfigKeyValue	1.3.6.1.4.1.2637.2.1.1441.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT dmmAdminConfigAdminState	1.3.6.1.4.1.2637.2.1.1441.1.11	INTEGER	read-create	DMM Configuration adminState.
hdlcConfigTable	1.3.6.1.4.1.2637.2.1.1452		not-accessible	High Level Data Link Control Information.
hdlcConfigEntry	1.3.6.1.4.1.2637.2.1.1452.1		not-accessible	This is the structure of entries in the hdlcConfigTable.
STR hdlcConfigPathString	1.3.6.1.4.1.2637.2.1.1452.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW hdlcConfigRowStatus	1.3.6.1.4.1.2637.2.1.1452.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT hdlcConfigKeyValue	1.3.6.1.4.1.2637.2.1.1452.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT hdlcConfigStrategy	1.3.6.1.4.1.2637.2.1.1452.1.11	INTEGER	read-create	HDLC Configuration.
INT hdlcConfigConnectTimeout	1.3.6.1.4.1.2637.2.1.1452.1.12	INTEGER	read-create	The time (in milliseconds) allowed for the HDLC controller to synchronize with the remote HDLC.
packAdminConfigTable	1.3.6.1.4.1.2637.2.1.1461		not-accessible	Pack Configuration Information.
packAdminConfigEntry	1.3.6.1.4.1.2637.2.1.1461.1		not-accessible	This is the structure of entries in the packAdminConfigTable.
STR packAdminConfigPathString	1.3.6.1.4.1.2637.2.1.1461.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW packAdminConfigRowStatus	1.3.6.1.4.1.2637.2.1.1461.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT packAdminConfigKeyValue	1.3.6.1.4.1.2637.2.1.1461.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT packAdminConfigAdminState	1.3.6.1.4.1.2637.2.1.1461.1.11	INTEGER	read-create	Pack Configuration adminState.
modemAdminConfigTable	1.3.6.1.4.1.2637.2.1.1471		not-accessible	Modem Administration Configuration Information.
modemAdminConfigEntry	1.3.6.1.4.1.2637.2.1.1471.1		not-accessible	This is the structure of entries in the modemAdminConfigTable.
STR modemAdminConfigPathString	1.3.6.1.4.1.2637.2.1.1471.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW modemAdminConfigRowStatus	1.3.6.1.4.1.2637.2.1.1471.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT modemAdminConfigKeyValue	1.3.6.1.4.1.2637.2.1.1471.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT modemAdminConfigAdminState	1.3.6.1.4.1.2637.2.1.1471.1.11	INTEGER	read-create	Modem Administration adminSTate.
shellConfigTable	1.3.6.1.4.1.2637.2.1.1481		not-accessible	MAM Card Shell Configuration.
shellConfigEntry	1.3.6.1.4.1.2637.2.1.1481.1		not-accessible	This is the structure of entries in the shellConfigTable.
STR shellConfigPathString	1.3.6.1.4.1.2637.2.1.1481.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW shellConfigRowStatus	1.3.6.1.4.1.2637.2.1.1481.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT shellConfigKeyValue	1.3.6.1.4.1.2637.2.1.1481.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT shellConfigConnectTimeout	1.3.6.1.4.1.2637.2.1.1481.1.111	INTEGER	read-create	The time allowed for the remote user to authenticate via the shell
INT shellConfigRetryCount	1.3.6.1.4.1.2637.2.1.1481.1.112	INTEGER	read-create	The number of authentication attempts allowed in the shell
BOO shellConfigEchoName	1.3.6.1.4.1.2637.2.1.1481.1.211	Boolean	read-create	Echo the characters in the user name as the remote user types them
BOO shellConfigEchoPassword	1.3.6.1.4.1.2637.2.1.1481.1.212	Boolean	read-create	Echo the characters in the password as the remote user types them
BOO shellConfigEchoCommands	1.3.6.1.4.1.2637.2.1.1481.1.213	Boolean	read-create	Echo the characters in the shell commands as the remote user types them
BOO shellConfigCtrlDAborts	1.3.6.1.4.1.2637.2.1.1481.1.215	Boolean	read-create	Reception of a Control-D character from the remote user causes the shell to be aborted and the line to be hung up
BOO shellConfigShellCommand	1.3.6.1.4.1.2637.2.1.1481.1.311	Boolean	read-create	Once the user has authenticated in the shell, allow them to enter the 'shell' command to initiate a system shell/command session
BOO shellConfigPPPCommand	1.3.6.1.4.1.2637.2.1.1481.1.312	Boolean	read-create	Once the user has authenticated in the shell, allow them to enter the 'PPP' command to initiate a PPP session
BOO shellConfigTelnetCommand	1.3.6.1.4.1.2637.2.1.1481.1.313	Boolean	read-create	Once the user has authenticated in the shell, allow them to enter the 'telnet' command to initiate a telnet session with a remote host
BOO shellConfigRloginCommand	1.3.6.1.4.1.2637.2.1.1481.1.314	Boolean	read-create	Once the user has authenticated in the shell, allow them to enter the 'rlogin' command to initiate an rlogin session with a remote host
OCT shellConfigBannerText	1.3.6.1.4.1.2637.2.1.1481.1.411	OCTET STRING	read-create	Text sent to the remote user at the start of a shell session
STR shellConfigExtraLoginText	1.3.6.1.4.1.2637.2.1.1481.1.412	DisplayString	read-create	Extra text to send to the remote user immediately after the banner.
STR shellConfigNamePrompt	1.3.6.1.4.1.2637.2.1.1481.1.413	DisplayString	read-create	The prompt sent to the remote user when asking for a user name
STR shellConfigPasswordPrompt	1.3.6.1.4.1.2637.2.1.1481.1.414	DisplayString	read-create	The prompt sent to the remote user when asking for a password
STR shellConfigWaitText	1.3.6.1.4.1.2637.2.1.1481.1.415	DisplayString	read-create	Text sent to the remote user to indicate that authentication is underway
STR shellConfigAuthenticatedText	1.3.6.1.4.1.2637.2.1.1481.1.416	DisplayString	read-create	Text sent to the remote user when authentication succeeds
STR shellConfigFailureText	1.3.6.1.4.1.2637.2.1.1481.1.417	DisplayString	read-create	Text sent to the remote user when an authentication attempt fails. The user may or may not have another authentication attempt.
STR shellConfigCommandPrompt	1.3.6.1.4.1.2637.2.1.1481.1.418	DisplayString	read-create	The text sent to prompt the remote user to enter a shell command
STR shellConfigHangupText	1.3.6.1.4.1.2637.2.1.1481.1.419	DisplayString	read-create	The text sent to indicate that authentication has failed, and that the line will be hung up
STR shellConfigTimeoutText	1.3.6.1.4.1.2637.2.1.1481.1.420	DisplayString	read-create	The text sent to indicate that authentication has taken too long, and that the line will be hung up
tunnelGroupConfigTable	1.3.6.1.4.1.2637.2.1.1502		not-accessible	Tunnel Group Configuration.
tunnelGroupConfigEntry	1.3.6.1.4.1.2637.2.1.1502.1		not-accessible	This is the structure of entries in the tunnelGroupConfigTable.
STR tunnelGroupConfigPathString	1.3.6.1.4.1.2637.2.1.1502.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW tunnelGroupConfigRowStatus	1.3.6.1.4.1.2637.2.1.1502.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT tunnelGroupConfigKeyValue	1.3.6.1.4.1.2637.2.1.1502.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT tunnelGroupConfigTunnelProtocol	1.3.6.1.4.1.2637.2.1.1502.1.11	INTEGER	read-create	Tunnel protocol used by this tunnel group
INT tunnelGroupConfigTunnelStrategy	1.3.6.1.4.1.2637.2.1.1502.1.12	INTEGER	read-create	Strategy for assigning calls to L2F or L2TP gateways
l2TPLNSTable	1.3.6.1.4.1.2637.2.1.1503		not-accessible	Layer-2 Tunneling Protocol Network Server Information.
l2TPLNSEntry	1.3.6.1.4.1.2637.2.1.1503.1		not-accessible	This is the structure of entries in the l2TPLNSTable.
STR l2TPLNSPathString	1.3.6.1.4.1.2637.2.1.1503.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW l2TPLNSRowStatus	1.3.6.1.4.1.2637.2.1.1503.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT l2TPLNSKeyValue	1.3.6.1.4.1.2637.2.1.1503.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP l2TPLNSIPAddress	1.3.6.1.4.1.2637.2.1.1503.1.11	IpAddress	read-create	IP address of L2TP LNS
IP l2TPLNSSourceIPAddress	1.3.6.1.4.1.2637.2.1.1503.1.12	IpAddress	read-create	Source IP address for L2TP control messages and data packets that we send to this LNS. If this is not configured, then we will use the sourceIpAddress from the VPOP configuration. If that is not configured, then we will use the mgmt_addr from the ip_services configuration.
STR l2TPLNSSendName	1.3.6.1.4.1.2637.2.1.1503.1.212	DisplayString	read-create	Name to send as the Host name in the L2TP Start Control Channel Reqest packet to open a tunnel
STR l2TPLNSSharedSecret	1.3.6.1.4.1.2637.2.1.1503.1.214	DisplayString	read-create	Shared Secret to use when opening a tunnel to the LNS. Used to authenticate the LNS and to authenticate ourselves to the LNS. Also used to encrypt certain AVPs such as the user name and PAP password. If left blank, tunnel authentication and AVP encryption will be disabled.
BOO l2TPLNSEnableUDPChecksum	1.3.6.1.4.1.2637.2.1.1503.1.311	Boolean	read-create	Calculate and include UDP checksum in transmitted L2TP data packets.
INT l2TPLNSHelloInterval	1.3.6.1.4.1.2637.2.1.1503.1.411	INTEGER	read-create	Time (in seconds)that must pass without any user data or control messages exchanged between the LAC and the LNS in oder for us to begin sending L2TP Hello messages to the LNS in order to determine if it is still responding. This time also specifies the duration between the transmitted L2TP Hello messages. Setting this to 0 will disable transmission of Hello messages to the LNS.
INT l2TPLNSInitialAckTimeout	1.3.6.1.4.1.2637.2.1.1503.1.412	INTEGER	read-create	Time (in seconds) to wait for an acknowledgment of a control message sent to the LNS. If this times out, the timeout value will be doubled for subsequent timeouts (up to the value of MaxAckTimeout) until the limit on the number of retries is reached. This value must be less than the value for MaxAckTimeout.
INT l2TPLNSMaxAckTimeout	1.3.6.1.4.1.2637.2.1.1503.1.413	INTEGER	read-create	Maximum Time (in seconds) to wait for an acknowledgment of a control message sent to the LNS. As acknowledgements timeout, the timeout value is doubled each time until this limit is reached. This value must be more than the value for InitialAckTimeout.
INT l2TPLNSCtrlMsgRetries	1.3.6.1.4.1.2637.2.1.1503.1.414	INTEGER	read-create	When L2TP control messages are not acknowledged by the LNS, this specifies the number of times to retry before declaring the tunnel dead.
INT l2TPLNSCtrlMsgRxWindow	1.3.6.1.4.1.2637.2.1.1503.1.415	INTEGER	read-create	This is the Receive Window Size that we sent to the LNS during tunnel establishment. It specifies the number of L2TP Ctrl Messages the LNS is allowed to send to us without receiving an acknowledgement from us.
dVSGatewayTable	1.3.6.1.4.1.2637.2.1.1504		not-accessible	DVS Tunnel Gateway.
dVSGatewayEntry	1.3.6.1.4.1.2637.2.1.1504.1		not-accessible	This is the structure of entries in the dVSGatewayTable.
STR dVSGatewayPathString	1.3.6.1.4.1.2637.2.1.1504.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW dVSGatewayRowStatus	1.3.6.1.4.1.2637.2.1.1504.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT dVSGatewayKeyValue	1.3.6.1.4.1.2637.2.1.1504.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP dVSGatewayGatewayAddress	1.3.6.1.4.1.2637.2.1.1504.1.11	IpAddress	read-create	IP address of primary gateway.
INT dVSGatewayAuthenticationProtocol	1.3.6.1.4.1.2637.2.1.1504.1.12	INTEGER	read-create	The authentication protocol between gateway and authentication server.
INT dVSGatewayAccountingProtocol	1.3.6.1.4.1.2637.2.1.1504.1.13	INTEGER	read-create	The accounting protocol between gateway and authentication server.
INT dVSGatewayAuthenticationType	1.3.6.1.4.1.2637.2.1.1504.1.14	INTEGER	read-create	Defines the type of authentication to use when opening the tunnel.
INT dVSGatewayAuthenticationMode	1.3.6.1.4.1.2637.2.1.1504.1.15	INTEGER	read-create	Defines where the mode of authentication.
INT dVSGatewayAuthenticationLocation	1.3.6.1.4.1.2637.2.1.1504.1.16	INTEGER	read-create	Defines where the to do second phase authentication.
STR dVSGatewayAuthenticationString	1.3.6.1.4.1.2637.2.1.1504.1.17	DisplayString	read-create	The key used for authentication.
INT dVSGatewayRetransmitTimeout	1.3.6.1.4.1.2637.2.1.1504.1.18	INTEGER	read-create	The time between MIP retransmit requests.
INT dVSGatewayMaxRetransmits	1.3.6.1.4.1.2637.2.1.1504.1.19	INTEGER	read-create	The maximum number of retransmits before trying the backup gateway.
INT dVSGatewayRenewalTime	1.3.6.1.4.1.2637.2.1.1504.1.20	INTEGER	read-create	The time between registration renewal requests.
INT dVSGatewayTgHardwareType	1.3.6.1.4.1.2637.2.1.1504.1.21	INTEGER	read-create	The type of net between the gateway the the CPE.
INT dVSGatewayTgHardwareAddressLength	1.3.6.1.4.1.2637.2.1.1504.1.22	INTEGER	read-create	The length of the hardware address in octets for CPE.
STR dVSGatewayTgHardwareAddress	1.3.6.1.4.1.2637.2.1.1504.1.23	DisplayString	read-create	The hardware address for the CPE ,either hex or decimal.
IP dVSGatewayPrimaryAuthenticationServerAddress	1.3.6.1.4.1.2637.2.1.1504.1.24	IpAddress	read-create	IP address of authentication server.
IP dVSGatewayPrimaryAccountingServerAddress	1.3.6.1.4.1.2637.2.1.1504.1.25	IpAddress	read-create	IP address of accounting server.
IP dVSGatewaySecondaryAuthenticationServerAddress	1.3.6.1.4.1.2637.2.1.1504.1.26	IpAddress	read-create	IP address of authentication server.
IP dVSGatewaySecondaryAccountingServerAddress	1.3.6.1.4.1.2637.2.1.1504.1.27	IpAddress	read-create	IP address of accounting server.
STR dVSGatewayUserName	1.3.6.1.4.1.2637.2.1.1504.1.28	DisplayString	read-create	User name used when attempting to authenticate with the remote peer
INT dVSGatewaySecurityParameterIndex	1.3.6.1.4.1.2637.2.1.1504.1.29	INTEGER	read-create	Used to indicate the security profile.
INT dVSGatewayIPTimeToLive	1.3.6.1.4.1.2637.2.1.1504.1.30	INTEGER	read-create	The time to live value for the Outer IP header.
IP dVSGatewayRipSourceAddress	1.3.6.1.4.1.2637.2.1.1504.1.31	IpAddress	read-create	The source address of RIP packets from the GW.
INT dVSGatewayRipLimit	1.3.6.1.4.1.2637.2.1.1504.1.32	INTEGER	read-create	The maximum number of RIP packets from the GW.
INT dVSGatewayRipTimeout	1.3.6.1.4.1.2637.2.1.1504.1.33	INTEGER	read-create	The interval between RIP packets from the GW.
BOO dVSGatewayDhcpEnable	1.3.6.1.4.1.2637.2.1.1504.1.40	Boolean	read-create	Specifies whether dhcp is enabled or not
IP dVSGatewayDhcpPrefServerAddr	1.3.6.1.4.1.2637.2.1.1504.1.41	IpAddress	read-create	IP address of primary dhcp server.
IP dVSGatewayDhcpPrefServerAddr2	1.3.6.1.4.1.2637.2.1.1504.1.42	IpAddress	read-create	IP address of secondary dhcp server.
inboundPolicyTable	1.3.6.1.4.1.2637.2.1.1603		not-accessible	IPSec System Security Policy Configuration
inboundPolicyEntry	1.3.6.1.4.1.2637.2.1.1603.1		not-accessible	This is the structure of entries in the inboundPolicyTable.
STR inboundPolicyPathString	1.3.6.1.4.1.2637.2.1.1603.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW inboundPolicyRowStatus	1.3.6.1.4.1.2637.2.1.1603.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT inboundPolicyKeyValue	1.3.6.1.4.1.2637.2.1.1603.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT inboundPolicyCommit	1.3.6.1.4.1.2637.2.1.1603.1.11	INTEGER	read-create	Must set to 1
INT inboundPolicyPolicy	1.3.6.1.4.1.2637.2.1.1603.1.12	INTEGER	read-create	Which System Security Policy to Configure
outboundPolicyTable	1.3.6.1.4.1.2637.2.1.1604		not-accessible	IPSec System Security Policy Configuration
outboundPolicyEntry	1.3.6.1.4.1.2637.2.1.1604.1		not-accessible	This is the structure of entries in the outboundPolicyTable.
STR outboundPolicyPathString	1.3.6.1.4.1.2637.2.1.1604.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW outboundPolicyRowStatus	1.3.6.1.4.1.2637.2.1.1604.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT outboundPolicyKeyValue	1.3.6.1.4.1.2637.2.1.1604.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT outboundPolicyCommit	1.3.6.1.4.1.2637.2.1.1604.1.11	INTEGER	read-create	Must set to 1
INT outboundPolicyPolicy	1.3.6.1.4.1.2637.2.1.1604.1.12	INTEGER	read-create	Which System Security Policy to Configure
inboundSpdbTable	1.3.6.1.4.1.2637.2.1.1606		not-accessible	IPSec Inbound SPDB
inboundSpdbEntry	1.3.6.1.4.1.2637.2.1.1606.1		not-accessible	This is the structure of entries in the inboundSpdbTable.
STR inboundSpdbPathString	1.3.6.1.4.1.2637.2.1.1606.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW inboundSpdbRowStatus	1.3.6.1.4.1.2637.2.1.1606.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT inboundSpdbKeyValue	1.3.6.1.4.1.2637.2.1.1606.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT inboundSpdbCommit	1.3.6.1.4.1.2637.2.1.1606.1.11	INTEGER	read-create	Must set to 1 to add to the spdb
IP inboundSpdbSelector	1.3.6.1.4.1.2637.2.1.1606.1.12	IpAddress	read-create	Peer IP address as Selector
INT inboundSpdbPolicy	1.3.6.1.4.1.2637.2.1.1606.1.13	INTEGER	read-create	Peer Selector Security Policy
IP inboundSpdbIpsecGwAddr	1.3.6.1.4.1.2637.2.1.1606.1.14	IpAddress	read-create	Peer IP Address for security association
INT inboundSpdbSpi	1.3.6.1.4.1.2637.2.1.1606.1.15	INTEGER	read-create	Peer SPI
INT inboundSpdbIpsecProtocol	1.3.6.1.4.1.2637.2.1.1606.1.16	INTEGER	read-create	IP Security Protocol (ESP)
outboundSpdbTable	1.3.6.1.4.1.2637.2.1.1607		not-accessible	IPSec Outbound SPDB
outboundSpdbEntry	1.3.6.1.4.1.2637.2.1.1607.1		not-accessible	This is the structure of entries in the outboundSpdbTable.
STR outboundSpdbPathString	1.3.6.1.4.1.2637.2.1.1607.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW outboundSpdbRowStatus	1.3.6.1.4.1.2637.2.1.1607.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT outboundSpdbKeyValue	1.3.6.1.4.1.2637.2.1.1607.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT outboundSpdbCommit	1.3.6.1.4.1.2637.2.1.1607.1.11	INTEGER	read-create	Must set to 1 to add to the sadb
IP outboundSpdbSelector	1.3.6.1.4.1.2637.2.1.1607.1.12	IpAddress	read-create	Destination IP address as Selector
INT outboundSpdbPolicy	1.3.6.1.4.1.2637.2.1.1607.1.13	INTEGER	read-create	Per Selector Security Policy
IP outboundSpdbIpsecGwAddr	1.3.6.1.4.1.2637.2.1.1607.1.14	IpAddress	read-create	Peer IP Address for security association
INT outboundSpdbSpi	1.3.6.1.4.1.2637.2.1.1607.1.15	INTEGER	read-create	Destination SPI
INT outboundSpdbIpsecProtocol	1.3.6.1.4.1.2637.2.1.1607.1.16	INTEGER	read-create	IP Security Protocol (ESP)
inboundSadbTable	1.3.6.1.4.1.2637.2.1.1609		not-accessible	IPSec INBOUND Security Association DB Configuration.
inboundSadbEntry	1.3.6.1.4.1.2637.2.1.1609.1		not-accessible	This is the structure of entries in the inboundSadbTable.
STR inboundSadbPathString	1.3.6.1.4.1.2637.2.1.1609.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW inboundSadbRowStatus	1.3.6.1.4.1.2637.2.1.1609.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT inboundSadbKeyValue	1.3.6.1.4.1.2637.2.1.1609.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT inboundSadbCommit	1.3.6.1.4.1.2637.2.1.1609.1.11	INTEGER	read-create	Must set to 1 to add to the sadb
IP inboundSadbIpAddr	1.3.6.1.4.1.2637.2.1.1609.1.12	IpAddress	read-create	Peer IP Address
INT inboundSadbSpi	1.3.6.1.4.1.2637.2.1.1609.1.13	INTEGER	read-create	Peer SPI
INT inboundSadbIpsecProtocol	1.3.6.1.4.1.2637.2.1.1609.1.14	INTEGER	read-create	IP Security Protocol (ESP)
INT inboundSadbAhMacAlg	1.3.6.1.4.1.2637.2.1.1609.1.15	INTEGER	read-create	AH Authentication Algorithm (HMAC MD5/HMAC SHA-1)
INT inboundSadbAhMacLength	1.3.6.1.4.1.2637.2.1.1609.1.16	INTEGER	read-create	AH Message Authentication Code (MAC) Length
INT inboundSadbAhMacKeyLength	1.3.6.1.4.1.2637.2.1.1609.1.17	INTEGER	read-create	AH MAC Key Length
OCT inboundSadbAhMacKey	1.3.6.1.4.1.2637.2.1.1609.1.18	OCTET STRING	read-create	Peer AH Data Authentication Key (Hex)
INT inboundSadbEspMacAlg	1.3.6.1.4.1.2637.2.1.1609.1.19	INTEGER	read-create	ESP Authentication Algorithm (HMAC MD5/HMAC SHA-1/No Authentication
INT inboundSadbEspMacLength	1.3.6.1.4.1.2637.2.1.1609.1.20	INTEGER	read-create	ESP Message Authentication Code (MAC) Length
INT inboundSadbEspMacKeyLength	1.3.6.1.4.1.2637.2.1.1609.1.21	INTEGER	read-create	ESP MAC Key Length
OCT inboundSadbEspMacKey	1.3.6.1.4.1.2637.2.1.1609.1.22	OCTET STRING	read-create	Peer ESP Data Authentication Key (Hex)
INT inboundSadbEspEncAlg	1.3.6.1.4.1.2637.2.1.1609.1.23	INTEGER	read-create	ESP Encryption Algorithm (DES CBC/Triple DES CBC/Null Cipher)
INT inboundSadbEspEncKeyLength	1.3.6.1.4.1.2637.2.1.1609.1.24	INTEGER	read-create	ESP Encryption Key Length
OCT inboundSadbEspEncKey	1.3.6.1.4.1.2637.2.1.1609.1.25	OCTET STRING	read-create	Peer ESP Data Encryption Key (Hex)
INT inboundSadbIpsecMode	1.3.6.1.4.1.2637.2.1.1609.1.26	INTEGER	read-create	IP Security Mode (Tunnel/Transport)
IP inboundSadbNextEncapIpAddr	1.3.6.1.4.1.2637.2.1.1609.1.27	IpAddress	read-create	Next IP Security Encapsulation Peer IP Address
INT inboundSadbNextEncapSpi	1.3.6.1.4.1.2637.2.1.1609.1.28	INTEGER	read-create	Next IP Security Encapsulation Peer SPI
INT inboundSadbNextEncapIpsecProtocol	1.3.6.1.4.1.2637.2.1.1609.1.29	INTEGER	read-create	Next IP Security Encapsulation Protocol
outboundSadbTable	1.3.6.1.4.1.2637.2.1.1610		not-accessible	IPSec OUTBOUND Security Association DB Configuration.
outboundSadbEntry	1.3.6.1.4.1.2637.2.1.1610.1		not-accessible	This is the structure of entries in the outboundSadbTable.
STR outboundSadbPathString	1.3.6.1.4.1.2637.2.1.1610.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW outboundSadbRowStatus	1.3.6.1.4.1.2637.2.1.1610.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT outboundSadbKeyValue	1.3.6.1.4.1.2637.2.1.1610.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT outboundSadbCommit	1.3.6.1.4.1.2637.2.1.1610.1.11	INTEGER	read-create	Must set to 1 to add to the sadb
IP outboundSadbIpAddr	1.3.6.1.4.1.2637.2.1.1610.1.12	IpAddress	read-create	Destination IP Address
INT outboundSadbSpi	1.3.6.1.4.1.2637.2.1.1610.1.13	INTEGER	read-create	Destination SPI
INT outboundSadbIpsecProtocol	1.3.6.1.4.1.2637.2.1.1610.1.14	INTEGER	read-create	IP Security Protocol (ESP)
INT outboundSadbAhMacAlg	1.3.6.1.4.1.2637.2.1.1610.1.15	INTEGER	read-create	AH Authentication Algorithm (HAMC MD5/HMAC SHA-1)
INT outboundSadbAhMacLength	1.3.6.1.4.1.2637.2.1.1610.1.16	INTEGER	read-create	AH Message Authentication Code (MAC) Length
INT outboundSadbAhMacKeyLength	1.3.6.1.4.1.2637.2.1.1610.1.17	INTEGER	read-create	AH MAC Key Length
OCT outboundSadbAhMacKey	1.3.6.1.4.1.2637.2.1.1610.1.18	OCTET STRING	read-create	Destination AH Data Authentication Key (Hex)
INT outboundSadbEspMacAlg	1.3.6.1.4.1.2637.2.1.1610.1.19	INTEGER	read-create	ESP Authentication Algorithm (HMAC MD5/HMAC SHA-1/No Authentication
INT outboundSadbEspMacLength	1.3.6.1.4.1.2637.2.1.1610.1.20	INTEGER	read-create	ESP Message Authentication Code (MAC) Length
INT outboundSadbEspMacKeyLength	1.3.6.1.4.1.2637.2.1.1610.1.21	INTEGER	read-create	ESP MAC Key Length
OCT outboundSadbEspMacKey	1.3.6.1.4.1.2637.2.1.1610.1.22	OCTET STRING	read-create	Destination ESP Data Authentication Key (Hex)
INT outboundSadbEspEncAlg	1.3.6.1.4.1.2637.2.1.1610.1.23	INTEGER	read-create	ESP Encryption Algorithm (DES CBC/Triple DES CBC/Null Cipher)
INT outboundSadbEspEncKeyLength	1.3.6.1.4.1.2637.2.1.1610.1.24	INTEGER	read-create	ESP Encryption Key Length
OCT outboundSadbEspEncKey	1.3.6.1.4.1.2637.2.1.1610.1.25	OCTET STRING	read-create	Destination ESP Data Encryption Key (Hex)
INT outboundSadbIpsecMode	1.3.6.1.4.1.2637.2.1.1610.1.26	INTEGER	read-create	IP Security Mode (Tunnel/Transport)
IP outboundSadbNextEncapIpAddr	1.3.6.1.4.1.2637.2.1.1610.1.27	IpAddress	read-create	Next IP Security Encapsulation Peer IP Address
INT outboundSadbNextEncapSpi	1.3.6.1.4.1.2637.2.1.1610.1.28	INTEGER	read-create	Next IP Security Encapsulation Peer SPI
INT outboundSadbNextEncapIpsecProtocol	1.3.6.1.4.1.2637.2.1.1610.1.29	INTEGER	read-create	Next IP Security Encapsulation Protocol
statsDummyTable	1.3.6.1.4.1.2637.2.1.1613		not-accessible	All containers must have at least one non-monitoring class. This is why stats_dummy object is present.
statsDummyEntry	1.3.6.1.4.1.2637.2.1.1613.1		not-accessible	This is the structure of entries in the statsDummyTable.
STR statsDummyPathString	1.3.6.1.4.1.2637.2.1.1613.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW statsDummyRowStatus	1.3.6.1.4.1.2637.2.1.1613.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT statsDummyKeyValue	1.3.6.1.4.1.2637.2.1.1613.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT statsDummyCommit	1.3.6.1.4.1.2637.2.1.1613.1.11	INTEGER	read-create	Dummy Element
vmsConfigTable	1.3.6.1.4.1.2637.2.1.1614		not-accessible	IPSec VMS120 Chip Configuration
vmsConfigEntry	1.3.6.1.4.1.2637.2.1.1614.1		not-accessible	This is the structure of entries in the vmsConfigTable.
STR vmsConfigPathString	1.3.6.1.4.1.2637.2.1.1614.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW vmsConfigRowStatus	1.3.6.1.4.1.2637.2.1.1614.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT vmsConfigKeyValue	1.3.6.1.4.1.2637.2.1.1614.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT vmsConfigCommit	1.3.6.1.4.1.2637.2.1.1614.1.11	INTEGER	read-create	Must set to 1
INT vmsConfigChipStateMask	1.3.6.1.4.1.2637.2.1.1614.1.12	INTEGER	read-create	Mask for VMS120's Capabilites
dacConfigTable	1.3.6.1.4.1.2637.2.1.2001		not-accessible	DAC Configuration Information.
dacConfigEntry	1.3.6.1.4.1.2637.2.1.2001.1		not-accessible	This is the structure of entries in the dacConfigTable.
STR dacConfigPathString	1.3.6.1.4.1.2637.2.1.2001.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW dacConfigRowStatus	1.3.6.1.4.1.2637.2.1.2001.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT dacConfigKeyValue	1.3.6.1.4.1.2637.2.1.2001.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT dacConfigAdminState	1.3.6.1.4.1.2637.2.1.2001.1.11	INTEGER	read-create	DAC Configuration adminState.
t3ConfigTable	1.3.6.1.4.1.2637.2.1.2005		not-accessible	T3 Configuration.
t3ConfigEntry	1.3.6.1.4.1.2637.2.1.2005.1		not-accessible	This is the structure of entries in the t3ConfigTable.
STR t3ConfigPathString	1.3.6.1.4.1.2637.2.1.2005.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW t3ConfigRowStatus	1.3.6.1.4.1.2637.2.1.2005.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT t3ConfigKeyValue	1.3.6.1.4.1.2637.2.1.2005.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT t3ConfigAdminState	1.3.6.1.4.1.2637.2.1.2005.1.11	INTEGER	read-create	T3 Configuration adminState.
INT t3ConfigLineFraming	1.3.6.1.4.1.2637.2.1.2005.1.12	INTEGER	read-create	T3 line framing.
INT t3ConfigLineCode	1.3.6.1.4.1.2637.2.1.2005.1.13	INTEGER	read-create	T3 line coding.
INT t3ConfigLineBuildout	1.3.6.1.4.1.2637.2.1.2005.1.14	INTEGER	read-create	T3 line buildout: long or short.
INT t3ConfigTiming	1.3.6.1.4.1.2637.2.1.2005.1.15	INTEGER	read-create	T3 clock source.
INT t3ConfigLoopBack	1.3.6.1.4.1.2637.2.1.2005.1.16	INTEGER	read-create	T3 loop back method.
STR t3ConfigCircuitID	1.3.6.1.4.1.2637.2.1.2005.1.17	DisplayString	read-create	T3 Circuit Identifier.
t1liuConfigTable	1.3.6.1.4.1.2637.2.1.2007		not-accessible	T1 Line Interface Unit Configuration.
t1liuConfigEntry	1.3.6.1.4.1.2637.2.1.2007.1		not-accessible	This is the structure of entries in the t1liuConfigTable.
STR t1liuConfigPathString	1.3.6.1.4.1.2637.2.1.2007.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW t1liuConfigRowStatus	1.3.6.1.4.1.2637.2.1.2007.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT t1liuConfigKeyValue	1.3.6.1.4.1.2637.2.1.2007.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT t1liuConfigAdminState	1.3.6.1.4.1.2637.2.1.2007.1.11	INTEGER	read-create	T1 LIU adminState.
STR t1liuConfigCircuitID	1.3.6.1.4.1.2637.2.1.2007.1.12	DisplayString	read-create	T1 Circuit Identifier for this T1 LTM.
dS3TrunkconfigTable	1.3.6.1.4.1.2637.2.1.2011		not-accessible	DS3 Trunk Configuration.
dS3TrunkconfigEntry	1.3.6.1.4.1.2637.2.1.2011.1		not-accessible	This is the structure of entries in the dS3TrunkconfigTable.
STR dS3TrunkconfigPathString	1.3.6.1.4.1.2637.2.1.2011.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW dS3TrunkconfigRowStatus	1.3.6.1.4.1.2637.2.1.2011.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT dS3TrunkconfigKeyValue	1.3.6.1.4.1.2637.2.1.2011.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT dS3TrunkconfigAdminState	1.3.6.1.4.1.2637.2.1.2011.1.11	INTEGER	read-create	DS3 trunk adminState.
INT dS3TrunkconfigLineFraming	1.3.6.1.4.1.2637.2.1.2011.1.12	INTEGER	read-create	DS3 trunk line framing.
INT dS3TrunkconfigLineBuildout	1.3.6.1.4.1.2637.2.1.2011.1.13	INTEGER	read-create	DS3 trunk line buildout: long or short.
INT dS3TrunkconfigTiming	1.3.6.1.4.1.2637.2.1.2011.1.14	INTEGER	read-create	DS3 trunk T3 clock source.
t1ConfigTable	1.3.6.1.4.1.2637.2.1.2101		not-accessible	T1 Configuration.
t1ConfigEntry	1.3.6.1.4.1.2637.2.1.2101.1		not-accessible	This is the structure of entries in the t1ConfigTable.
STR t1ConfigPathString	1.3.6.1.4.1.2637.2.1.2101.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW t1ConfigRowStatus	1.3.6.1.4.1.2637.2.1.2101.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT t1ConfigKeyValue	1.3.6.1.4.1.2637.2.1.2101.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT t1ConfigAdminState	1.3.6.1.4.1.2637.2.1.2101.1.11	INTEGER	read-create	T1 Configuration adminState.
INT t1ConfigLineFraming	1.3.6.1.4.1.2637.2.1.2101.1.13	INTEGER	read-create	T1 Line Framing.
INT t1ConfigLineCode	1.3.6.1.4.1.2637.2.1.2101.1.14	INTEGER	read-create	T1 Line Encoding.
INT t1ConfigLineBuildout	1.3.6.1.4.1.2637.2.1.2101.1.15	INTEGER	read-create	T1 Line Build Out Attenuation.
INT t1ConfigSignaling	1.3.6.1.4.1.2637.2.1.2101.1.16	INTEGER	read-create	T1 Line Signaling Method.
INT t1ConfigClockingPriority	1.3.6.1.4.1.2637.2.1.2101.1.17	INTEGER	read-create	rank this interface for clocking selection (1-9).
INT t1ConfigYellowAlarm	1.3.6.1.4.1.2637.2.1.2101.1.18	INTEGER	read-create	yellow alarm method.
INT t1ConfigLoopBack	1.3.6.1.4.1.2637.2.1.2101.1.19	INTEGER	read-create	loop back method.
STR t1ConfigDefaultNumber	1.3.6.1.4.1.2637.2.1.2101.1.20	DisplayString	read-create	Phone Number specified in incoming calls if none is provided by the network. Also used in outgoing calls if no number is specified.
STR t1ConfigOverrideNumber	1.3.6.1.4.1.2637.2.1.2101.1.21	DisplayString	read-create	Phone Number forced on incoming calls if none is provided by the network. Also used in outgoing calls, and outgoing calls.
STR t1ConfigCircuitID	1.3.6.1.4.1.2637.2.1.2101.1.22	DisplayString	read-create	Descriptive name of this interface
INT t1ConfigAlarmCriteria	1.3.6.1.4.1.2637.2.1.2101.1.23	INTEGER	read-create	T1 Layer 1 alarm criteria
t1TrunkconfigTable	1.3.6.1.4.1.2637.2.1.2105		not-accessible	T1 Trunk Configuration.
t1TrunkconfigEntry	1.3.6.1.4.1.2637.2.1.2105.1		not-accessible	This is the structure of entries in the t1TrunkconfigTable.
STR t1TrunkconfigPathString	1.3.6.1.4.1.2637.2.1.2105.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW t1TrunkconfigRowStatus	1.3.6.1.4.1.2637.2.1.2105.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT t1TrunkconfigKeyValue	1.3.6.1.4.1.2637.2.1.2105.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT t1TrunkconfigAdminState	1.3.6.1.4.1.2637.2.1.2105.1.11	INTEGER	read-create	T1 Trunk adminState.
INT t1TrunkconfigClockSource	1.3.6.1.4.1.2637.2.1.2105.1.12	INTEGER	read-create	T1 Trunk Clock Source.
INT t1TrunkconfigLineFraming	1.3.6.1.4.1.2637.2.1.2105.1.13	INTEGER	read-create	T1 Trunk line framing.
INT t1TrunkconfigLineCode	1.3.6.1.4.1.2637.2.1.2105.1.14	INTEGER	read-create	T1 Trunk line encoding.
INT t1TrunkconfigLineBuildout	1.3.6.1.4.1.2637.2.1.2105.1.15	INTEGER	read-create	T1 Trunk line build out attenuation.
t1NumberTable	1.3.6.1.4.1.2637.2.1.2107		not-accessible	T1 Numnber.
t1NumberEntry	1.3.6.1.4.1.2637.2.1.2107.1		not-accessible	This is the structure of entries in the t1NumberTable.
STR t1NumberPathString	1.3.6.1.4.1.2637.2.1.2107.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW t1NumberRowStatus	1.3.6.1.4.1.2637.2.1.2107.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT t1NumberKeyValue	1.3.6.1.4.1.2637.2.1.2107.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR t1NumberNumber	1.3.6.1.4.1.2637.2.1.2107.1.11	DisplayString	read-create	Number accessible to this T1; \n\r'*' will match rest of string; '?' is a single char wild card
ds0ConfigTable	1.3.6.1.4.1.2637.2.1.2111		not-accessible	DS0 Configuration.
ds0ConfigEntry	1.3.6.1.4.1.2637.2.1.2111.1		not-accessible	This is the structure of entries in the ds0ConfigTable.
STR ds0ConfigPathString	1.3.6.1.4.1.2637.2.1.2111.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ds0ConfigRowStatus	1.3.6.1.4.1.2637.2.1.2111.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ds0ConfigKeyValue	1.3.6.1.4.1.2637.2.1.2111.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ds0ConfigAdminState	1.3.6.1.4.1.2637.2.1.2111.1.11	INTEGER	read-create	DS0 configuration adminState.
iSDNConfigTable	1.3.6.1.4.1.2637.2.1.2201		not-accessible	ISDN Configuration Information.
iSDNConfigEntry	1.3.6.1.4.1.2637.2.1.2201.1		not-accessible	This is the structure of entries in the iSDNConfigTable.
STR iSDNConfigPathString	1.3.6.1.4.1.2637.2.1.2201.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW iSDNConfigRowStatus	1.3.6.1.4.1.2637.2.1.2201.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT iSDNConfigKeyValue	1.3.6.1.4.1.2637.2.1.2201.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT iSDNConfigDirection	1.3.6.1.4.1.2637.2.1.2201.1.11	INTEGER	read-create	network or user
INT iSDNConfigSwitchType	1.3.6.1.4.1.2637.2.1.2201.1.12	INTEGER	read-create	AT&T, DMS, NET5, ...
INT iSDNConfigNFAS	1.3.6.1.4.1.2637.2.1.2201.1.13	INTEGER	read-create	Non-Facility Associated Signaling
INT iSDNConfigNFASInterface	1.3.6.1.4.1.2637.2.1.2201.1.14	INTEGER	read-create	the interface that will signal for this iface
INT iSDNConfigNFASID	1.3.6.1.4.1.2637.2.1.2201.1.15	INTEGER	read-create	ID to use for this interface
INT iSDNConfigSendService	1.3.6.1.4.1.2637.2.1.2201.1.16	INTEGER	read-create	choose SERVICE message criteria for b-channel maintenance
INT iSDNConfigForceService	1.3.6.1.4.1.2637.2.1.2201.1.17	INTEGER	read-create	Select SERVICE message override
INT iSDNConfigIIDEncoding	1.3.6.1.4.1.2637.2.1.2201.1.18	INTEGER	read-create	how to encode the interface ID for this interface
iSDNLayer2TimersTable	1.3.6.1.4.1.2637.2.1.2202		not-accessible	ISDN Layer-2 Timers Information.
iSDNLayer2TimersEntry	1.3.6.1.4.1.2637.2.1.2202.1		not-accessible	This is the structure of entries in the iSDNLayer2TimersTable.
STR iSDNLayer2TimersPathString	1.3.6.1.4.1.2637.2.1.2202.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW iSDNLayer2TimersRowStatus	1.3.6.1.4.1.2637.2.1.2202.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT iSDNLayer2TimersKeyValue	1.3.6.1.4.1.2637.2.1.2202.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT iSDNLayer2TimersT200	1.3.6.1.4.1.2637.2.1.2202.1.11	INTEGER	read-create	retry timer. 1 sec
INT iSDNLayer2TimersT203	1.3.6.1.4.1.2637.2.1.2202.1.12	INTEGER	read-create	keep-alive timer. 10 sec
INT iSDNLayer2TimersT204	1.3.6.1.4.1.2637.2.1.2202.1.13	INTEGER	read-create	XID retrans timer. 2 sec
INT iSDNLayer2TimersN201	1.3.6.1.4.1.2637.2.1.2202.1.14	INTEGER	read-create	max I-frame. 260 octets
INT iSDNLayer2TimersN204	1.3.6.1.4.1.2637.2.1.2202.1.15	INTEGER	read-create	max XID retrans count. 3 tries
INT iSDNLayer2TimersK	1.3.6.1.4.1.2637.2.1.2202.1.16	INTEGER	read-create	max window size. 7 frames
iSDNLayer3TimersTable	1.3.6.1.4.1.2637.2.1.2203		not-accessible	ISDN Layer-3 Timers Information.
iSDNLayer3TimersEntry	1.3.6.1.4.1.2637.2.1.2203.1		not-accessible	This is the structure of entries in the iSDNLayer3TimersTable.
STR iSDNLayer3TimersPathString	1.3.6.1.4.1.2637.2.1.2203.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW iSDNLayer3TimersRowStatus	1.3.6.1.4.1.2637.2.1.2203.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT iSDNLayer3TimersKeyValue	1.3.6.1.4.1.2637.2.1.2203.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT iSDNLayer3TimersT302	1.3.6.1.4.1.2637.2.1.2203.1.11	INTEGER	read-create	overlap receiving timer. 15 sec
INT iSDNLayer3TimersT303	1.3.6.1.4.1.2637.2.1.2203.1.12	INTEGER	read-create	call initiated timer. 4 sec
INT iSDNLayer3TimersT304	1.3.6.1.4.1.2637.2.1.2203.1.13	INTEGER	read-create	overlap sending timer. 30 sec
INT iSDNLayer3TimersT305	1.3.6.1.4.1.2637.2.1.2203.1.14	INTEGER	read-create	disconnect req timer. 30 sec
INT iSDNLayer3TimersT306	1.3.6.1.4.1.2637.2.1.2203.1.15	INTEGER	read-create	suspend req. 30 sec
INT iSDNLayer3TimersT308	1.3.6.1.4.1.2637.2.1.2203.1.16	INTEGER	read-create	release req. 4 sec
INT iSDNLayer3TimersT309	1.3.6.1.4.1.2637.2.1.2203.1.17	INTEGER	read-create	clear active calls timer. 90 sec
INT iSDNLayer3TimersT310	1.3.6.1.4.1.2637.2.1.2203.1.18	INTEGER	read-create	connect timer. 10 sec
INT iSDNLayer3TimersT312	1.3.6.1.4.1.2637.2.1.2203.1.19	INTEGER	read-create	setup timer. 6 sec
INT iSDNLayer3TimersT313	1.3.6.1.4.1.2637.2.1.2203.1.20	INTEGER	read-create	message frag timer. 4 sec
INT iSDNLayer3TimersT316	1.3.6.1.4.1.2637.2.1.2203.1.21	INTEGER	read-create	restart timer. 120 sec
INT iSDNLayer3TimersT318	1.3.6.1.4.1.2637.2.1.2203.1.22	INTEGER	read-create	resume timer. 4 sec
INT iSDNLayer3TimersT319	1.3.6.1.4.1.2637.2.1.2203.1.23	INTEGER	read-create	suspend timer. 4 sec
INT iSDNLayer3TimersT321	1.3.6.1.4.1.2637.2.1.2203.1.24	INTEGER	read-create	service ack timer. 30 sec
INT iSDNLayer3TimersT322	1.3.6.1.4.1.2637.2.1.2203.1.25	INTEGER	read-create	status enq timer. 4 sec
INT iSDNLayer3TimersT3m1	1.3.6.1.4.1.2637.2.1.2203.1.26	INTEGER	read-create	d-channel backup timer. 40 sec
rbsConfigTable	1.3.6.1.4.1.2637.2.1.2205		not-accessible	Robbed-Bit Signalling Configuration Information.
rbsConfigEntry	1.3.6.1.4.1.2637.2.1.2205.1		not-accessible	This is the structure of entries in the rbsConfigTable.
STR rbsConfigPathString	1.3.6.1.4.1.2637.2.1.2205.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW rbsConfigRowStatus	1.3.6.1.4.1.2637.2.1.2205.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT rbsConfigKeyValue	1.3.6.1.4.1.2637.2.1.2205.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT rbsConfigMethod	1.3.6.1.4.1.2637.2.1.2205.1.11	INTEGER	read-create	RBS method.
BOO rbsConfigDid	1.3.6.1.4.1.2637.2.1.2205.1.13	Boolean	read-create	Enable Direct Inward Dial. When true, digits are collected to determine the called address. When false, no digits are collected.
BOO rbsConfigAllowNoDigits	1.3.6.1.4.1.2637.2.1.2205.1.14	Boolean	read-create	Determines the action taken when Direct Inward Dial is configured, but no resources are available to collect the digits. If true, then calls are accepted without the called address information. If false, then busy is re turned
BOO rbsConfigDod	1.3.6.1.4.1.2637.2.1.2205.1.15	Boolean	read-create	Enable Direct Outward Dial. When true, digits are sent for outgoing calls. When false, no digits are sent
BOO rbsConfigGlareResolve	1.3.6.1.4.1.2637.2.1.2205.1.17	Boolean	read-create	Determines the action taken when glare (collision between incoming and outgoing call) is detected. If true, the glare is resolved by abandoning the outgoing call. If false, the outgoing call is preserved, and the far si de is assumed to abandon the incoming call
BOO rbsConfigOOS	1.3.6.1.4.1.2637.2.1.2205.1.19	Boolean	read-create	Indicates the state of the channel.
BOO rbsConfigBusyOutOOS	1.3.6.1.4.1.2637.2.1.2205.1.20	Boolean	read-create	Determines a channel's appearance when in out-of-service state. If true, the channel appears busy (off-hook). If false, the channel remains on-hook, but will not answer calls
INT rbsConfigDigitType	1.3.6.1.4.1.2637.2.1.2205.1.21	INTEGER	read-create	RBS Digit Type.
INT rbsConfigMaxCalledDigits	1.3.6.1.4.1.2637.2.1.2205.1.22	INTEGER	read-create	Maximum number of expected DNIS digits (called number) in an wink-start incoming call.
BOO rbsConfigReqR1CallingNumber	1.3.6.1.4.1.2637.2.1.2205.1.23	Boolean	read-create	Request the calling number on an incoming MF R1 call. Used in Taiwan.
rbsTimersTable	1.3.6.1.4.1.2637.2.1.2206		not-accessible	RBS Timers.
rbsTimersEntry	1.3.6.1.4.1.2637.2.1.2206.1		not-accessible	This is the structure of entries in the rbsTimersTable.
STR rbsTimersPathString	1.3.6.1.4.1.2637.2.1.2206.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW rbsTimersRowStatus	1.3.6.1.4.1.2637.2.1.2206.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT rbsTimersKeyValue	1.3.6.1.4.1.2637.2.1.2206.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT rbsTimersHitThresh	1.3.6.1.4.1.2637.2.1.2206.1.11	INTEGER	read-create	The amount of time a robbed bit pattern must be stable before it is considered to have changed value.
INT rbsTimersInSeizeHold	1.3.6.1.4.1.2637.2.1.2206.1.12	INTEGER	read-create	The minimum duration of an incoming off-hook pattern to be considered a valid line seizure.
INT rbsTimersInPreWinkExtend	1.3.6.1.4.1.2637.2.1.2206.1.13	INTEGER	read-create	The maximum delay before sending a wink start
INT rbsTimersInMinWinkHold	1.3.6.1.4.1.2637.2.1.2206.1.14	INTEGER	read-create	The minimum duration of a wink start
INT rbsTimersInMaxWinkHold	1.3.6.1.4.1.2637.2.1.2206.1.15	INTEGER	read-create	The maximum duration of a wink start
INT rbsTimersInPostWink	1.3.6.1.4.1.2637.2.1.2206.1.16	INTEGER	read-create	The duration of 'blind' period after sending a wink start
INT rbsTimersInDigit	1.3.6.1.4.1.2637.2.1.2206.1.17	INTEGER	read-create	The maximum duration to collect all digits for an incoming call
INT rbsTimersAlerting	1.3.6.1.4.1.2637.2.1.2206.1.18	INTEGER	read-create	The maximum duration in alerting state before abandoning call
INT rbsTimersOutSeizeHold	1.3.6.1.4.1.2637.2.1.2206.1.19	INTEGER	read-create	The minimum duration of off-hook signal to seize line for an outgoing call
INT rbsTimersOutWinkWait	1.3.6.1.4.1.2637.2.1.2206.1.20	INTEGER	read-create	The maximum wink delay allowed after seizing line for outgoing call
INT rbsTimersOutMaxWinkHold	1.3.6.1.4.1.2637.2.1.2206.1.21	INTEGER	read-create	The maximum wink duration before declaring glare
INT rbsTimersOutMaxWinkGlare	1.3.6.1.4.1.2637.2.1.2206.1.22	INTEGER	read-create	The maximum allowed duration of glare, when GlareResolve is false)
INT rbsTimersOutWaitSeizeAck	1.3.6.1.4.1.2637.2.1.2206.1.23	INTEGER	read-create	The maximum allowed seizure-acknowledge delay, for Ground-Start/FXS
INT rbsTimersOutPostWink	1.3.6.1.4.1.2637.2.1.2206.1.24	INTEGER	read-create	The duration of 'blind' period after receiving a wink start
INT rbsTimersOutFirstDigit	1.3.6.1.4.1.2637.2.1.2206.1.25	INTEGER	read-create	The maximum delay before sending the first dial digit
INT rbsTimersOutDigit	1.3.6.1.4.1.2637.2.1.2206.1.26	INTEGER	read-create	The maximum duration to send all dial digits
INT rbsTimersOutPostDigit	1.3.6.1.4.1.2637.2.1.2206.1.27	INTEGER	read-create	The duration of 'blind' period after sending dial digits
INT rbsTimersOutWaitConnect	1.3.6.1.4.1.2637.2.1.2206.1.28	INTEGER	read-create	The maximum delay before receiving a connect indication
INT rbsTimersOutConnectHold	1.3.6.1.4.1.2637.2.1.2206.1.29	INTEGER	read-create	The minimum duration of an off-hook pattern to be considered a valid connect indication
INT rbsTimersLocalRelease	1.3.6.1.4.1.2637.2.1.2206.1.30	INTEGER	read-create	The maximum delay to release local system resources
INT rbsTimersLineRelease	1.3.6.1.4.1.2637.2.1.2206.1.31	INTEGER	read-create	When locally releasing a call, the maximum delay before receiving a line-release indication
INT rbsTimersLineReleaseHold	1.3.6.1.4.1.2637.2.1.2206.1.32	INTEGER	read-create	The minimum duration of an on-hook pattern to be considered a valid line-release indication
INT rbsTimersRecover	1.3.6.1.4.1.2637.2.1.2206.1.33	INTEGER	read-create	The minimum duration of 'blind' period after each incoming or outgoing call
INT rbsTimersInWaitKP	1.3.6.1.4.1.2637.2.1.2206.1.34	INTEGER	read-create	The maximum delay before receiving a KP
INT rbsTimersInPostDigitDelay	1.3.6.1.4.1.2637.2.1.2206.1.35	INTEGER	read-create	After receiving MF digits, the minimum delay before sending out a wink
INT rbsTimersInToneDigitWait	1.3.6.1.4.1.2637.2.1.2206.1.36	INTEGER	read-create	Maximum wait period for incoming tone digits (DTMF DNIS digits in wink-start trunks, or MF ANI digits in R1 trunks)
INT rbsTimersInKpAckDelay	1.3.6.1.4.1.2637.2.1.2206.1.37	INTEGER	read-create	Delay before sending KP acknowledge back. Used in Taiwan.
INT rbsTimersInKpDetectWait	1.3.6.1.4.1.2637.2.1.2206.1.38	INTEGER	read-create	Maximum waiting period for KP. Used in Taiwan.
INT rbsTimersInAniWaitKp	1.3.6.1.4.1.2637.2.1.2206.1.39	INTEGER	read-create	Maximum waiting period for KP while collecting Calling NUmber. Used in Taiwan.
INT rbsTimersInPreKpExtend	1.3.6.1.4.1.2637.2.1.2206.1.40	INTEGER	read-create	The maximum Proceed-to-Send delay before the CO drops the call. Used in Taiwan.
INT rbsTimersOutPreDialQuietHold	1.3.6.1.4.1.2637.2.1.2206.1.41	INTEGER	read-create	Hold time after KP, before dialing out. Used in Taiwan.
iSDNLayer2TimersAtt5essTable	1.3.6.1.4.1.2637.2.1.2211		not-accessible	ISDN Layer-2 ATT/5ESS Timers Information.
iSDNLayer2TimersAtt5essEntry	1.3.6.1.4.1.2637.2.1.2211.1		not-accessible	This is the structure of entries in the iSDNLayer2TimersAtt5essTable.
STR iSDNLayer2TimersAtt5essPathString	1.3.6.1.4.1.2637.2.1.2211.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW iSDNLayer2TimersAtt5essRowStatus	1.3.6.1.4.1.2637.2.1.2211.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT iSDNLayer2TimersAtt5essKeyValue	1.3.6.1.4.1.2637.2.1.2211.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT iSDNLayer2TimersAtt5essT200	1.3.6.1.4.1.2637.2.1.2211.1.11	INTEGER	read-create	retry timer. 1 sec
INT iSDNLayer2TimersAtt5essT203	1.3.6.1.4.1.2637.2.1.2211.1.12	INTEGER	read-create	keep-alive timer. 30 sec
INT iSDNLayer2TimersAtt5essT204	1.3.6.1.4.1.2637.2.1.2211.1.13	INTEGER	read-create	XID retrans timer. 2 sec
INT iSDNLayer2TimersAtt5essN201	1.3.6.1.4.1.2637.2.1.2211.1.14	INTEGER	read-create	max I-frame. 260 octets
INT iSDNLayer2TimersAtt5essN204	1.3.6.1.4.1.2637.2.1.2211.1.15	INTEGER	read-create	max XID retrans count. 3 tries
INT iSDNLayer2TimersAtt5essK	1.3.6.1.4.1.2637.2.1.2211.1.16	INTEGER	read-create	max window size. 7 frames
iSDNLayer3TimersAtt4essTable	1.3.6.1.4.1.2637.2.1.2220		not-accessible	ISDN Layer-3 ATT/4ESS Timers Information.
iSDNLayer3TimersAtt4essEntry	1.3.6.1.4.1.2637.2.1.2220.1		not-accessible	This is the structure of entries in the iSDNLayer3TimersAtt4essTable.
STR iSDNLayer3TimersAtt4essPathString	1.3.6.1.4.1.2637.2.1.2220.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW iSDNLayer3TimersAtt4essRowStatus	1.3.6.1.4.1.2637.2.1.2220.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT iSDNLayer3TimersAtt4essKeyValue	1.3.6.1.4.1.2637.2.1.2220.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT iSDNLayer3TimersAtt4essT302	1.3.6.1.4.1.2637.2.1.2220.1.11	INTEGER	read-create	overlap receiving timer. 10 sec
INT iSDNLayer3TimersAtt4essT303	1.3.6.1.4.1.2637.2.1.2220.1.12	INTEGER	read-create	call initiated timer. 4 sec
INT iSDNLayer3TimersAtt4essT304	1.3.6.1.4.1.2637.2.1.2220.1.13	INTEGER	read-create	overlap sending timer. 4 sec
INT iSDNLayer3TimersAtt4essT305	1.3.6.1.4.1.2637.2.1.2220.1.14	INTEGER	read-create	disconnect req timer. 4 sec
INT iSDNLayer3TimersAtt4essT306	1.3.6.1.4.1.2637.2.1.2220.1.15	INTEGER	read-create	suspend req. 15 sec
INT iSDNLayer3TimersAtt4essT308	1.3.6.1.4.1.2637.2.1.2220.1.16	INTEGER	read-create	release req. 4 sec
INT iSDNLayer3TimersAtt4essT309	1.3.6.1.4.1.2637.2.1.2220.1.17	INTEGER	read-create	clear active calls timer. 90 sec
INT iSDNLayer3TimersAtt4essT310	1.3.6.1.4.1.2637.2.1.2220.1.18	INTEGER	read-create	connect timer. 10 sec
INT iSDNLayer3TimersAtt4essT312	1.3.6.1.4.1.2637.2.1.2220.1.19	INTEGER	read-create	setup timer. 4.5 sec
INT iSDNLayer3TimersAtt4essT313	1.3.6.1.4.1.2637.2.1.2220.1.20	INTEGER	read-create	message frag timer. 4 sec
INT iSDNLayer3TimersAtt4essT316	1.3.6.1.4.1.2637.2.1.2220.1.21	INTEGER	read-create	restart timer. 120 sec
INT iSDNLayer3TimersAtt4essT318	1.3.6.1.4.1.2637.2.1.2220.1.22	INTEGER	read-create	resume timer. 4 sec
INT iSDNLayer3TimersAtt4essT319	1.3.6.1.4.1.2637.2.1.2220.1.23	INTEGER	read-create	suspend timer. 4 sec
INT iSDNLayer3TimersAtt4essT321	1.3.6.1.4.1.2637.2.1.2220.1.24	INTEGER	read-create	service ack timer. 30 sec
INT iSDNLayer3TimersAtt4essT322	1.3.6.1.4.1.2637.2.1.2220.1.25	INTEGER	read-create	status enq timer. 4 sec
INT iSDNLayer3TimersAtt4essT3m1	1.3.6.1.4.1.2637.2.1.2220.1.26	INTEGER	read-create	d-channel backup timer. 40 sec
iSDNLayer3TimersAtt5essTable	1.3.6.1.4.1.2637.2.1.2221		not-accessible	ISDN Layer-3 ATT/5ESS Timers Information.
iSDNLayer3TimersAtt5essEntry	1.3.6.1.4.1.2637.2.1.2221.1		not-accessible	This is the structure of entries in the iSDNLayer3TimersAtt5essTable.
STR iSDNLayer3TimersAtt5essPathString	1.3.6.1.4.1.2637.2.1.2221.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW iSDNLayer3TimersAtt5essRowStatus	1.3.6.1.4.1.2637.2.1.2221.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT iSDNLayer3TimersAtt5essKeyValue	1.3.6.1.4.1.2637.2.1.2221.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT iSDNLayer3TimersAtt5essT302	1.3.6.1.4.1.2637.2.1.2221.1.11	INTEGER	read-create	overlap receiving timer. 10 sec
INT iSDNLayer3TimersAtt5essT303	1.3.6.1.4.1.2637.2.1.2221.1.12	INTEGER	read-create	call initiated timer. 4 sec
INT iSDNLayer3TimersAtt5essT304	1.3.6.1.4.1.2637.2.1.2221.1.13	INTEGER	read-create	overlap sending timer. 30 sec
INT iSDNLayer3TimersAtt5essT305	1.3.6.1.4.1.2637.2.1.2221.1.14	INTEGER	read-create	disconnect req timer. 30 sec
INT iSDNLayer3TimersAtt5essT306	1.3.6.1.4.1.2637.2.1.2221.1.15	INTEGER	read-create	suspend req. 30 sec
INT iSDNLayer3TimersAtt5essT308	1.3.6.1.4.1.2637.2.1.2221.1.16	INTEGER	read-create	release req. 4 sec
INT iSDNLayer3TimersAtt5essT309	1.3.6.1.4.1.2637.2.1.2221.1.17	INTEGER	read-create	clear active calls timer. 90 sec
INT iSDNLayer3TimersAtt5essT310	1.3.6.1.4.1.2637.2.1.2221.1.18	INTEGER	read-create	connect timer. 10 sec
INT iSDNLayer3TimersAtt5essT312	1.3.6.1.4.1.2637.2.1.2221.1.19	INTEGER	read-create	setup timer. 6 sec
INT iSDNLayer3TimersAtt5essT313	1.3.6.1.4.1.2637.2.1.2221.1.20	INTEGER	read-create	message frag timer. 4 sec
INT iSDNLayer3TimersAtt5essT316	1.3.6.1.4.1.2637.2.1.2221.1.21	INTEGER	read-create	restart timer. 120 sec
INT iSDNLayer3TimersAtt5essT318	1.3.6.1.4.1.2637.2.1.2221.1.22	INTEGER	read-create	resume timer. 4 sec
INT iSDNLayer3TimersAtt5essT319	1.3.6.1.4.1.2637.2.1.2221.1.23	INTEGER	read-create	suspend timer. 4 sec
INT iSDNLayer3TimersAtt5essT321	1.3.6.1.4.1.2637.2.1.2221.1.24	INTEGER	read-create	service ack timer. 30 sec
INT iSDNLayer3TimersAtt5essT322	1.3.6.1.4.1.2637.2.1.2221.1.25	INTEGER	read-create	status enq timer. 4 sec
INT iSDNLayer3TimersAtt5essT3m1	1.3.6.1.4.1.2637.2.1.2221.1.26	INTEGER	read-create	d-channel backup timer. 40 sec
iSDNLayer3TimersNtiDmsTable	1.3.6.1.4.1.2637.2.1.2222		not-accessible	ISDN Layer-3 NTI/DMS Timers Information.
iSDNLayer3TimersNtiDmsEntry	1.3.6.1.4.1.2637.2.1.2222.1		not-accessible	This is the structure of entries in the iSDNLayer3TimersNtiDmsTable.
STR iSDNLayer3TimersNtiDmsPathString	1.3.6.1.4.1.2637.2.1.2222.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW iSDNLayer3TimersNtiDmsRowStatus	1.3.6.1.4.1.2637.2.1.2222.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT iSDNLayer3TimersNtiDmsKeyValue	1.3.6.1.4.1.2637.2.1.2222.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT iSDNLayer3TimersNtiDmsT302	1.3.6.1.4.1.2637.2.1.2222.1.11	INTEGER	read-create	overlap receiving timer. 15 sec
INT iSDNLayer3TimersNtiDmsT303	1.3.6.1.4.1.2637.2.1.2222.1.12	INTEGER	read-create	call initiated timer. 4 sec
INT iSDNLayer3TimersNtiDmsT304	1.3.6.1.4.1.2637.2.1.2222.1.13	INTEGER	read-create	overlap sending timer. 30 sec
INT iSDNLayer3TimersNtiDmsT305	1.3.6.1.4.1.2637.2.1.2222.1.14	INTEGER	read-create	disconnect req timer. 30 sec
INT iSDNLayer3TimersNtiDmsT306	1.3.6.1.4.1.2637.2.1.2222.1.15	INTEGER	read-create	suspend req. 30 sec
INT iSDNLayer3TimersNtiDmsT308	1.3.6.1.4.1.2637.2.1.2222.1.16	INTEGER	read-create	release req. 4 sec
INT iSDNLayer3TimersNtiDmsT309	1.3.6.1.4.1.2637.2.1.2222.1.17	INTEGER	read-create	clear active calls timer. 90 sec
INT iSDNLayer3TimersNtiDmsT310	1.3.6.1.4.1.2637.2.1.2222.1.18	INTEGER	read-create	connect timer. 10 sec
INT iSDNLayer3TimersNtiDmsT312	1.3.6.1.4.1.2637.2.1.2222.1.19	INTEGER	read-create	setup timer. 6 sec
INT iSDNLayer3TimersNtiDmsT313	1.3.6.1.4.1.2637.2.1.2222.1.20	INTEGER	read-create	message frag timer. 4 sec
INT iSDNLayer3TimersNtiDmsT316	1.3.6.1.4.1.2637.2.1.2222.1.21	INTEGER	read-create	restart timer. 120 sec
INT iSDNLayer3TimersNtiDmsT318	1.3.6.1.4.1.2637.2.1.2222.1.22	INTEGER	read-create	resume timer. 4 sec
INT iSDNLayer3TimersNtiDmsT319	1.3.6.1.4.1.2637.2.1.2222.1.23	INTEGER	read-create	suspend timer. 4 sec
INT iSDNLayer3TimersNtiDmsT321	1.3.6.1.4.1.2637.2.1.2222.1.24	INTEGER	read-create	service ack timer. 30 sec
INT iSDNLayer3TimersNtiDmsT322	1.3.6.1.4.1.2637.2.1.2222.1.25	INTEGER	read-create	status enq timer. 4 sec
INT iSDNLayer3TimersNtiDmsT3m1	1.3.6.1.4.1.2637.2.1.2222.1.26	INTEGER	read-create	d-channel backup timer. 40 sec
iSDNLayer3TimersNet5Table	1.3.6.1.4.1.2637.2.1.2223		not-accessible	ISDN Layer-3 NET5 Timers Information.
iSDNLayer3TimersNet5Entry	1.3.6.1.4.1.2637.2.1.2223.1		not-accessible	This is the structure of entries in the iSDNLayer3TimersNet5Table.
STR iSDNLayer3TimersNet5PathString	1.3.6.1.4.1.2637.2.1.2223.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW iSDNLayer3TimersNet5RowStatus	1.3.6.1.4.1.2637.2.1.2223.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT iSDNLayer3TimersNet5KeyValue	1.3.6.1.4.1.2637.2.1.2223.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT iSDNLayer3TimersNet5T302	1.3.6.1.4.1.2637.2.1.2223.1.11	INTEGER	read-create	overlap receiving timer. 15 sec
INT iSDNLayer3TimersNet5T303	1.3.6.1.4.1.2637.2.1.2223.1.12	INTEGER	read-create	call initiated timer. 4 sec
INT iSDNLayer3TimersNet5T304	1.3.6.1.4.1.2637.2.1.2223.1.13	INTEGER	read-create	overlap sending timer. 15 sec
INT iSDNLayer3TimersNet5T305	1.3.6.1.4.1.2637.2.1.2223.1.14	INTEGER	read-create	disconnect req timer. 30 sec
INT iSDNLayer3TimersNet5T306	1.3.6.1.4.1.2637.2.1.2223.1.15	INTEGER	read-create	suspend req. 30 sec
INT iSDNLayer3TimersNet5T308	1.3.6.1.4.1.2637.2.1.2223.1.16	INTEGER	read-create	release req. 4 sec
INT iSDNLayer3TimersNet5T309	1.3.6.1.4.1.2637.2.1.2223.1.17	INTEGER	read-create	clear active calls timer. 90 sec
INT iSDNLayer3TimersNet5T310	1.3.6.1.4.1.2637.2.1.2223.1.18	INTEGER	read-create	connect timer. 10 sec
INT iSDNLayer3TimersNet5T312	1.3.6.1.4.1.2637.2.1.2223.1.19	INTEGER	read-create	setup timer. 6 sec
INT iSDNLayer3TimersNet5T313	1.3.6.1.4.1.2637.2.1.2223.1.20	INTEGER	read-create	message frag timer. 4 sec
INT iSDNLayer3TimersNet5T316	1.3.6.1.4.1.2637.2.1.2223.1.21	INTEGER	read-create	restart timer. 120 sec
INT iSDNLayer3TimersNet5T318	1.3.6.1.4.1.2637.2.1.2223.1.22	INTEGER	read-create	resume timer. 4 sec
INT iSDNLayer3TimersNet5T319	1.3.6.1.4.1.2637.2.1.2223.1.23	INTEGER	read-create	suspend timer. 4 sec
INT iSDNLayer3TimersNet5T321	1.3.6.1.4.1.2637.2.1.2223.1.24	INTEGER	read-create	service ack timer. 30 sec
INT iSDNLayer3TimersNet5T322	1.3.6.1.4.1.2637.2.1.2223.1.25	INTEGER	read-create	status enq timer. 4 sec
INT iSDNLayer3TimersNet5T3m1	1.3.6.1.4.1.2637.2.1.2223.1.26	INTEGER	read-create	d-channel backup timer. 40 sec
iSDNLayer3TimersNttTable	1.3.6.1.4.1.2637.2.1.2224		not-accessible	ISDN Layer-3 NTT Timers Information.
iSDNLayer3TimersNttEntry	1.3.6.1.4.1.2637.2.1.2224.1		not-accessible	This is the structure of entries in the iSDNLayer3TimersNttTable.
STR iSDNLayer3TimersNttPathString	1.3.6.1.4.1.2637.2.1.2224.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW iSDNLayer3TimersNttRowStatus	1.3.6.1.4.1.2637.2.1.2224.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT iSDNLayer3TimersNttKeyValue	1.3.6.1.4.1.2637.2.1.2224.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT iSDNLayer3TimersNttT302	1.3.6.1.4.1.2637.2.1.2224.1.11	INTEGER	read-create	overlap receiving timer. 15 sec
INT iSDNLayer3TimersNttT303	1.3.6.1.4.1.2637.2.1.2224.1.12	INTEGER	read-create	call initiated timer. 4 sec
INT iSDNLayer3TimersNttT304	1.3.6.1.4.1.2637.2.1.2224.1.13	INTEGER	read-create	overlap sending timer. 30 sec
INT iSDNLayer3TimersNttT305	1.3.6.1.4.1.2637.2.1.2224.1.14	INTEGER	read-create	disconnect req timer. 4 sec
INT iSDNLayer3TimersNttT306	1.3.6.1.4.1.2637.2.1.2224.1.15	INTEGER	read-create	suspend req. 30 sec
INT iSDNLayer3TimersNttT308	1.3.6.1.4.1.2637.2.1.2224.1.16	INTEGER	read-create	release req. 4 sec
INT iSDNLayer3TimersNttT309	1.3.6.1.4.1.2637.2.1.2224.1.17	INTEGER	read-create	clear active calls timer. 90 sec
INT iSDNLayer3TimersNttT310	1.3.6.1.4.1.2637.2.1.2224.1.18	INTEGER	read-create	connect timer. 40 sec
INT iSDNLayer3TimersNttT312	1.3.6.1.4.1.2637.2.1.2224.1.19	INTEGER	read-create	setup timer. 6 sec
INT iSDNLayer3TimersNttT313	1.3.6.1.4.1.2637.2.1.2224.1.20	INTEGER	read-create	message frag timer. 4 sec
INT iSDNLayer3TimersNttT316	1.3.6.1.4.1.2637.2.1.2224.1.21	INTEGER	read-create	restart timer. 120 sec
INT iSDNLayer3TimersNttT318	1.3.6.1.4.1.2637.2.1.2224.1.22	INTEGER	read-create	resume timer. 4 sec
INT iSDNLayer3TimersNttT319	1.3.6.1.4.1.2637.2.1.2224.1.23	INTEGER	read-create	suspend timer. 4 sec
INT iSDNLayer3TimersNttT321	1.3.6.1.4.1.2637.2.1.2224.1.24	INTEGER	read-create	service ack timer. 30 sec
INT iSDNLayer3TimersNttT322	1.3.6.1.4.1.2637.2.1.2224.1.25	INTEGER	read-create	status enq timer. 4 sec
INT iSDNLayer3TimersNttT3m1	1.3.6.1.4.1.2637.2.1.2224.1.26	INTEGER	read-create	d-channel backup timer. 40 sec
leasedLineConfigTable	1.3.6.1.4.1.2637.2.1.2301		not-accessible	Leased-line Configuration Information.
leasedLineConfigEntry	1.3.6.1.4.1.2637.2.1.2301.1		not-accessible	This is the structure of entries in the leasedLineConfigTable.
STR leasedLineConfigPathString	1.3.6.1.4.1.2637.2.1.2301.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW leasedLineConfigRowStatus	1.3.6.1.4.1.2637.2.1.2301.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT leasedLineConfigKeyValue	1.3.6.1.4.1.2637.2.1.2301.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT leasedLineConfigAdminState	1.3.6.1.4.1.2637.2.1.2301.1.11	INTEGER	read-create	Leased Line Configuration adminState.
virtualLinkConfigTable	1.3.6.1.4.1.2637.2.1.2303		not-accessible	Virtual Line Configuration Information.
virtualLinkConfigEntry	1.3.6.1.4.1.2637.2.1.2303.1		not-accessible	This is the structure of entries in the virtualLinkConfigTable.
STR virtualLinkConfigPathString	1.3.6.1.4.1.2637.2.1.2303.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW virtualLinkConfigRowStatus	1.3.6.1.4.1.2637.2.1.2303.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT virtualLinkConfigKeyValue	1.3.6.1.4.1.2637.2.1.2303.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT virtualLinkConfigChannelPhyLink	1.3.6.1.4.1.2637.2.1.2303.1.11	INTEGER	read-create	Specifies which Physical Link the Virtual Link is connected to.
INT virtualLinkConfigChannelEnable	1.3.6.1.4.1.2637.2.1.2303.1.12	INTEGER	read-create	Specifies whether this interface is to be activated.
STR virtualLinkConfigChannelName	1.3.6.1.4.1.2637.2.1.2303.1.13	DisplayString	read-create	HDLC Channel Name
INT virtualLinkConfigChannelMap	1.3.6.1.4.1.2637.2.1.2303.1.14	INTEGER	read-create	This is a bit mask that represents which channels are configured on the T1. The value should be entered in as a decimal value. The default is all channels
BOO virtualLinkConfigChannelDelineation	1.3.6.1.4.1.2637.2.1.2303.1.15	Boolean	read-create	For the given HDLC channel, flag sequence insertion and bit stuffing is performed on the data stream. If set to TRUE, then flag sequence insertion and bit stuffing is performed
INT virtualLinkConfigChannelCRCType	1.3.6.1.4.1.2637.2.1.2303.1.16	INTEGER	read-create	HDLC channel CRC generation for outgoing data stream. CRC type is ignored when ChannelDelineation is FALSE
INT virtualLinkConfigChannelIdle	1.3.6.1.4.1.2637.2.1.2303.1.17	INTEGER	read-create	Indicates that the HDLC channel should use flag bytes or HDLC idle as the interframe time fill between HDLC packets.
BOO virtualLinkConfigChannelFCSInvert	1.3.6.1.4.1.2637.2.1.2303.1.18	Boolean	read-create	Controls the inversion of the FCS field inserted into the transmit packet. If set to TRUE, the FCS field in the outgoing HDLC stream is logically inverted. (NA for SCC)
BOO virtualLinkConfigChannelDataInvert	1.3.6.1.4.1.2637.2.1.2303.1.19	Boolean	read-create	Controls the HDLC processor to logically invert the outgoing HDLC data stream. If set to TRUE, the outgoing HDLC stream is logically inverted. (NA for SCC)
BOO virtualLinkConfigChannelChannelisedLink	1.3.6.1.4.1.2637.2.1.2303.1.20	Boolean	read-create	HDLC Channel Channelise Link.(T1 Only. Currently Not Supported)
BOO virtualLinkConfigChannelByteSyncLink	1.3.6.1.4.1.2637.2.1.2303.1.22	Boolean	read-create	This attribute is ignored if ChannelChannelisedLink is TRUE. (NA for SCC)
INT virtualLinkConfigChannelRate	1.3.6.1.4.1.2637.2.1.2303.1.23	INTEGER	read-create	Indicates the rate of each individual DS0. (NA for SCC).
INT virtualLinkConfigChannelQueueDepth	1.3.6.1.4.1.2637.2.1.2303.1.24	INTEGER	read-create	Internal queue depth for data to be transmitted by this Channel. Once queue depth is reached, data will be dropped until queue depth empties beyond this value. Data dropped is clipped from end of queue.
e1ConfigTable	1.3.6.1.4.1.2637.2.1.2501		not-accessible	E1 Configuration.
e1ConfigEntry	1.3.6.1.4.1.2637.2.1.2501.1		not-accessible	This is the structure of entries in the e1ConfigTable.
STR e1ConfigPathString	1.3.6.1.4.1.2637.2.1.2501.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW e1ConfigRowStatus	1.3.6.1.4.1.2637.2.1.2501.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT e1ConfigKeyValue	1.3.6.1.4.1.2637.2.1.2501.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT e1ConfigAdminState	1.3.6.1.4.1.2637.2.1.2501.1.11	INTEGER	read-create	E1 configuration adminState.
INT e1ConfigLineFraming	1.3.6.1.4.1.2637.2.1.2501.1.13	INTEGER	read-create	E1 line framing.
INT e1ConfigLineCode	1.3.6.1.4.1.2637.2.1.2501.1.14	INTEGER	read-create	E1 line encoding.
INT e1ConfigLineBuildout	1.3.6.1.4.1.2637.2.1.2501.1.15	INTEGER	read-create	E1 line build out attenuation.
INT e1ConfigSignaling	1.3.6.1.4.1.2637.2.1.2501.1.16	INTEGER	read-create	E1 line signaling method.
INT e1ConfigClockingPriority	1.3.6.1.4.1.2637.2.1.2501.1.17	INTEGER	read-create	rank this interface for clocking selection (1-9).
INT e1ConfigLoopBack	1.3.6.1.4.1.2637.2.1.2501.1.19	INTEGER	read-create	E1 loop back method.
STR e1ConfigDefaultNumber	1.3.6.1.4.1.2637.2.1.2501.1.20	DisplayString	read-create	Phone Number specified in incoming calls if none is provided by the network. Also used in outgoing calls if no number is specified.
STR e1ConfigOverrideNumber	1.3.6.1.4.1.2637.2.1.2501.1.21	DisplayString	read-create	Phone Number forced on incoming calls if none is provided by the network. Also used in outgoing calls, and outgoing calls.
STR e1ConfigCircuitID	1.3.6.1.4.1.2637.2.1.2501.1.22	DisplayString	read-create	Descriptive name of this interface
INT e1ConfigAlarmCriteria	1.3.6.1.4.1.2637.2.1.2501.1.23	INTEGER	read-create	E1 Layer 1 alarm criteria
e1TrunkconfigTable	1.3.6.1.4.1.2637.2.1.2505		not-accessible	E1 Trunk Configuration.
e1TrunkconfigEntry	1.3.6.1.4.1.2637.2.1.2505.1		not-accessible	This is the structure of entries in the e1TrunkconfigTable.
STR e1TrunkconfigPathString	1.3.6.1.4.1.2637.2.1.2505.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW e1TrunkconfigRowStatus	1.3.6.1.4.1.2637.2.1.2505.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT e1TrunkconfigKeyValue	1.3.6.1.4.1.2637.2.1.2505.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT e1TrunkconfigAdminState	1.3.6.1.4.1.2637.2.1.2505.1.11	INTEGER	read-create	E1 trunk configuration adminState.
INT e1TrunkconfigClockSource	1.3.6.1.4.1.2637.2.1.2505.1.12	INTEGER	read-create	E1 trunk clock source.
INT e1TrunkconfigLineFraming	1.3.6.1.4.1.2637.2.1.2505.1.13	INTEGER	read-create	E1 trunk line framing.
INT e1TrunkconfigLineCode	1.3.6.1.4.1.2637.2.1.2505.1.14	INTEGER	read-create	E1 trunk line encoding.
INT e1TrunkconfigLineBuildout	1.3.6.1.4.1.2637.2.1.2505.1.15	INTEGER	read-create	E1 trunk line build out attenuation.
casConfigTable	1.3.6.1.4.1.2637.2.1.2507		not-accessible	Channel Associated Signalling.
casConfigEntry	1.3.6.1.4.1.2637.2.1.2507.1		not-accessible	This is the structure of entries in the casConfigTable.
STR casConfigPathString	1.3.6.1.4.1.2637.2.1.2507.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW casConfigRowStatus	1.3.6.1.4.1.2637.2.1.2507.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT casConfigKeyValue	1.3.6.1.4.1.2637.2.1.2507.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT casConfigSigBitType	1.3.6.1.4.1.2637.2.1.2507.1.11	INTEGER	read-create	Country specific signaling bit type.
INT casConfigR2Type	1.3.6.1.4.1.2637.2.1.2507.1.12	INTEGER	read-create	Country specific R2 switch type.
INT casConfigMaxCalledDigits	1.3.6.1.4.1.2637.2.1.2507.1.13	INTEGER	read-create	Maximum number of expected DNIS digits (called number) in an incoming call.
INT casConfigMaxCallingDigits	1.3.6.1.4.1.2637.2.1.2507.1.14	INTEGER	read-create	Maximum number of expected ANI digits (calling number) in an incoming call. Used in India.
BOO casConfigReqCallingNumber	1.3.6.1.4.1.2637.2.1.2507.1.15	Boolean	read-create	Request calling number from remote end.
BOO casConfigCallingNumberMandatory	1.3.6.1.4.1.2637.2.1.2507.1.16	Boolean	read-create	Calling Number is mandatory on incoming calls. When not available, incoming call will be rejected.
BOO casConfigRingBack	1.3.6.1.4.1.2637.2.1.2507.1.17	Boolean	read-create	Enable audible ring back to remote end.
INT casConfigCdBits	1.3.6.1.4.1.2637.2.1.2507.1.18	INTEGER	read-create	Country specific pattern for signaling bits C and D.
BOO casConfigAssumeAcceptCall	1.3.6.1.4.1.2637.2.1.2507.1.19	Boolean	read-create	Assume all R2 calls will be accepted regardless of calling/called numbers. This parameter is used after inWaitAccept timer expires with no response from security server.
BOO casConfigOOS	1.3.6.1.4.1.2637.2.1.2507.1.20	Boolean	read-create	Indicates the state of the channel. If true, the channel is in out-of-service state. If false, the channel is in-service
BOO casConfigBusyOutOOS	1.3.6.1.4.1.2637.2.1.2507.1.21	Boolean	read-create	Determines a channel's appearance when in out-of-service state. If true, the channel appears busy (off-hook). If false, the channel remains on-hook, but will not answer calls
BOO casConfigWinkAfterAnswer	1.3.6.1.4.1.2637.2.1.2507.1.22	Boolean	read-create	Wink After Answer, when active, will drop an incoming call for 100 msec. Used in some countries (Brazil) to reject collect calls.
BOO casConfigSkipCategoryRequest	1.3.6.1.4.1.2637.2.1.2507.1.23	Boolean	read-create	Do not request the caller's category on an incoming call, set speech condition. Used in Korea.
casTimersTable	1.3.6.1.4.1.2637.2.1.2508		not-accessible	Channel Associated Signalling Timers.
casTimersEntry	1.3.6.1.4.1.2637.2.1.2508.1		not-accessible	This is the structure of entries in the casTimersTable.
STR casTimersPathString	1.3.6.1.4.1.2637.2.1.2508.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW casTimersRowStatus	1.3.6.1.4.1.2637.2.1.2508.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT casTimersKeyValue	1.3.6.1.4.1.2637.2.1.2508.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT casTimersHitThresh	1.3.6.1.4.1.2637.2.1.2508.1.11	INTEGER	read-create	The amount of time a signaling bit pattern must be stable before it is considered to have changed value.
INT casTimersInSeizeHold	1.3.6.1.4.1.2637.2.1.2508.1.12	INTEGER	read-create	The minimum duration of an incoming off-hook pattern to be considered a valid line seizure.
INT casTimersOutSeizeHold	1.3.6.1.4.1.2637.2.1.2508.1.13	INTEGER	read-create	The minimum duration of off-hook signal to seize line for an outgoing call
INT casTimersOutWaitSeizeAck	1.3.6.1.4.1.2637.2.1.2508.1.14	INTEGER	read-create	The maximum allowed seizure-acknowledge delay.
INT casTimersOutWaitConnect	1.3.6.1.4.1.2637.2.1.2508.1.15	INTEGER	read-create	The maximum delay before receiving a connect indication
INT casTimersOutConnectHold	1.3.6.1.4.1.2637.2.1.2508.1.16	INTEGER	read-create	The minimum duration of an off-hook pattern to be considered a valid connect indication
INT casTimersLocalRelease	1.3.6.1.4.1.2637.2.1.2508.1.17	INTEGER	read-create	The maximum delay to release local system resources
INT casTimersLineRelease	1.3.6.1.4.1.2637.2.1.2508.1.18	INTEGER	read-create	When locally releasing a call, the maximum delay before receiving a line-release indication
INT casTimersLineReleaseHold	1.3.6.1.4.1.2637.2.1.2508.1.19	INTEGER	read-create	The minimum duration of an on-hook pattern to be considered a valid line-release indication
INT casTimersRecover	1.3.6.1.4.1.2637.2.1.2508.1.20	INTEGER	read-create	The minimum duration of 'blind' period after each incoming or outgoing call
INT casTimersWaitR2Digit	1.3.6.1.4.1.2637.2.1.2508.1.21	INTEGER	read-create	The maximum waiting period for an incoming R2 digit, before dropping the call.
INT casTimersInWaitAccept	1.3.6.1.4.1.2637.2.1.2508.1.22	INTEGER	read-create	The maximum waiting period for the CVX to process calling/called numbers before proceeding with the R2 call sequence accepting or rejecting an incoming call.
INT casTimersInWaitAnswer	1.3.6.1.4.1.2637.2.1.2508.1.23	INTEGER	read-create	The maximum waiting period before the CVX answers an incoming call.
INT casTimersOutWaitAnswer	1.3.6.1.4.1.2637.2.1.2508.1.24	INTEGER	read-create	The maximum waiting period before the remote end answers the CVX's outbound call.
INT casTimersInCongestionPulseDuration	1.3.6.1.4.1.2637.2.1.2508.1.25	INTEGER	read-create	Duration of the congestion A-4 pulse. This backward pulse is sent on incoming calls, when no response is received for an excessive period of time.
INT casTimersInSetupCompleteHold	1.3.6.1.4.1.2637.2.1.2508.1.26	INTEGER	read-create	Delay between reception of last inbound digit and begin ringing (Q.471/Q.475). For New Zealand, this parameter should be set to 1900 msec.
INT casTimersInAnswerToWinkDelay	1.3.6.1.4.1.2637.2.1.2508.1.27	INTEGER	read-create	After an incoming call is answered, an optional wink may be sent to the switch, to reject collect a call. This parameter specifies how long to wait, after the call is answered, before transmitting a wink.
INT casTimersInAfterAnswerWinkPulse	1.3.6.1.4.1.2637.2.1.2508.1.28	INTEGER	read-create	Duration of the wink sent after an incoming call is answered. This optional wink pulse is used in Brazil to filter incoming collect calls.
INT casTimersOutLineAbnormalReleaseHold	1.3.6.1.4.1.2637.2.1.2508.1.29	INTEGER	read-create	Hold period for an abnormal line release condition on an outbound call.
INT casTimersOutLocalReleaseDelay	1.3.6.1.4.1.2637.2.1.2508.1.30	INTEGER	read-create	Delay between the local disconnect on outbound calls, and the transmission of the local line release bits.
e1liuConfigTable	1.3.6.1.4.1.2637.2.1.2510		not-accessible	E1 Channel Line Interface Unit Configuration.
e1liuConfigEntry	1.3.6.1.4.1.2637.2.1.2510.1		not-accessible	This is the structure of entries in the e1liuConfigTable.
STR e1liuConfigPathString	1.3.6.1.4.1.2637.2.1.2510.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW e1liuConfigRowStatus	1.3.6.1.4.1.2637.2.1.2510.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT e1liuConfigKeyValue	1.3.6.1.4.1.2637.2.1.2510.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT e1liuConfigAdminState	1.3.6.1.4.1.2637.2.1.2510.1.11	INTEGER	read-create	E1 Channel LIU adminState.
STR e1liuConfigCircuitID	1.3.6.1.4.1.2637.2.1.2510.1.12	DisplayString	read-create	Identifier for this Line Termination Module.
cLITable	1.3.6.1.4.1.2637.2.1.2800		not-accessible	CLI Configuration Parameters.
cLIEntry	1.3.6.1.4.1.2637.2.1.2800.1		not-accessible	This is the structure of entries in the cLITable.
STR cLIPathString	1.3.6.1.4.1.2637.2.1.2800.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW cLIRowStatus	1.3.6.1.4.1.2637.2.1.2800.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT cLIKeyValue	1.3.6.1.4.1.2637.2.1.2800.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR cLIPrompt	1.3.6.1.4.1.2637.2.1.2800.1.11	DisplayString	read-create	CLI prompt string.
BOO cLIFEPLog	1.3.6.1.4.1.2637.2.1.2800.1.12	Boolean	read-create	If TRUE, the FEP will send its log events to the Event LOG.
BOO cLISyncLog	1.3.6.1.4.1.2637.2.1.2800.1.13	Boolean	read-create	If TRUE, messages regarding master-slave SCC file syncing will be shown.
INT cLIWarningTemp	1.3.6.1.4.1.2637.2.1.2800.1.14	INTEGER	read-create	If the temperature (in degrees C) of any card crosses this value, a warning alarm will be sent.
BOO cLIHoldTempShutdownCardsInReset	1.3.6.1.4.1.2637.2.1.2800.1.15	Boolean	read-create	Cards shut down due to temperature are held down until card up is typed
INT cLIShutdownTemperature	1.3.6.1.4.1.2637.2.1.2800.1.16	INTEGER	read-create	If the temperature (in degrees C) of any card crosses this value, it will be shut down
clockRecoveryTable	1.3.6.1.4.1.2637.2.1.2900		not-accessible	Clock Recovery Information.
clockRecoveryEntry	1.3.6.1.4.1.2637.2.1.2900.1		not-accessible	This is the structure of entries in the clockRecoveryTable.
STR clockRecoveryPathString	1.3.6.1.4.1.2637.2.1.2900.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW clockRecoveryRowStatus	1.3.6.1.4.1.2637.2.1.2900.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT clockRecoveryKeyValue	1.3.6.1.4.1.2637.2.1.2900.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT clockRecoveryPrimarySlot	1.3.6.1.4.1.2637.2.1.2900.1.11	INTEGER	read-create	Clocking Primary Clock Source Slot
INT clockRecoveryPrimaryPort	1.3.6.1.4.1.2637.2.1.2900.1.12	INTEGER	read-create	Clocking Primary Source Slot Port.
INT clockRecoverySecondarySlot	1.3.6.1.4.1.2637.2.1.2900.1.13	INTEGER	read-create	Clocking Secondary Clock Source Slot.
INT clockRecoverySecondaryPort	1.3.6.1.4.1.2637.2.1.2900.1.14	INTEGER	read-create	Clocking Secondary Clock Source Slot Port.
INT clockRecoveryPrimaryT3	1.3.6.1.4.1.2637.2.1.2900.1.15	INTEGER	read-create	Clocking Source Primary T3.
INT clockRecoverySecondaryT3	1.3.6.1.4.1.2637.2.1.2900.1.16	INTEGER	read-create	Clocking Source Secondary T3.
frInterfaceConfigTable	1.3.6.1.4.1.2637.2.1.3001		not-accessible	Frame Relay Interface Configuration.
frInterfaceConfigEntry	1.3.6.1.4.1.2637.2.1.3001.1		not-accessible	This is the structure of entries in the frInterfaceConfigTable.
STR frInterfaceConfigPathString	1.3.6.1.4.1.2637.2.1.3001.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW frInterfaceConfigRowStatus	1.3.6.1.4.1.2637.2.1.3001.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT frInterfaceConfigKeyValue	1.3.6.1.4.1.2637.2.1.3001.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT frInterfaceConfigFrDlcmiIfIndex	1.3.6.1.4.1.2637.2.1.3001.1.11	INTEGER	read-create	Unique identifier that identifies this Frame Relay Interface configuration
INT frInterfaceConfigFrDlcmiLMIType	1.3.6.1.4.1.2637.2.1.3001.1.12	INTEGER	read-create	This variable states which Data Link Connec- tion Management scheme is active on the Frame Relay interface.
INT frInterfaceConfigFrDlcmiAddress	1.3.6.1.4.1.2637.2.1.3001.1.13	INTEGER	read-create	This variable states which address format is in use on the Frame Relay interface. Currently, on Q922 is supported.
INT frInterfaceConfigFrDlcmiAddressLen	1.3.6.1.4.1.2637.2.1.3001.1.14	INTEGER	read-create	This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control portion. Currently, on 2 octet address are supported
INT frInterfaceConfigFrDlcmiPollingInterval	1.3.6.1.4.1.2637.2.1.3001.1.15	INTEGER	read-create	This is the number of seconds between successive status enquiry messages. This is equivalent to T391.
INT frInterfaceConfigFrDlcmiFullEnquiryInterval	1.3.6.1.4.1.2637.2.1.3001.1.16	INTEGER	read-create	Number of status enquiry intervals that pass before issuance of a full status enquiry message. This is equivalent to N391.
INT frInterfaceConfigFrDlcmiErrorThreshold	1.3.6.1.4.1.2637.2.1.3001.1.17	INTEGER	read-create	This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. This is equivalent to N392.
INT frInterfaceConfigFrDlcmiMonitoredEvents	1.3.6.1.4.1.2637.2.1.3001.1.18	INTEGER	read-create	This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down. This is equivalent to N393.
INT frInterfaceConfigFrDlcmiMaxSupportedVCs	1.3.6.1.4.1.2637.2.1.3001.1.19	INTEGER	read-create	The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. Currently, any DLCI dictated by the Frame Relay network will not be enabled unless that frCircuitEntry is configured.
INT frInterfaceConfigFrDlcmiMulticast	1.3.6.1.4.1.2637.2.1.3001.1.20	INTEGER	read-create	This indicates whether the Frame Relay interface is using a multicast service
INT frInterfaceConfigFrDlcmiLinkType	1.3.6.1.4.1.2637.2.1.3001.1.21	INTEGER	read-create	This indicates whether the Frame Relay interface is the Network-side of a UNI (UNI-DCE), User-side of a UNI (UNI-DTE) or a Network-Network Inteface (NNI).
INT frInterfaceConfigFrDlcmiMaxLogIntf	1.3.6.1.4.1.2637.2.1.3001.1.22	INTEGER	read-create	Maximum number of Logical Interfaces supported on this Frame Relay Interface
INT frInterfaceConfigFrDlcmiLinkEnable	1.3.6.1.4.1.2637.2.1.3001.1.23	INTEGER	read-create	Specifies whether this interface is to be activated.
INT frInterfaceConfigFrDlcmiLMIFlowControl	1.3.6.1.4.1.2637.2.1.3001.1.24	INTEGER	read-create	Specifies whether LMI based (R-bit) notification performs flow control for the Circuits on this interface.
INT frInterfaceConfigFrDlcmiBECNFlowControl	1.3.6.1.4.1.2637.2.1.3001.1.25	INTEGER	read-create	Specifies whether BECN notification performs flow control for the Circuits on this interface.
INT frInterfaceConfigFrDlcmiLMIBandwidthControl	1.3.6.1.4.1.2637.2.1.3001.1.26	INTEGER	read-create	Specifies whether LMI based CIR notification affects the CIR flow control parameters for the circuits on this interface.
INT frInterfaceConfigFrDlcmiInjectionManagement	1.3.6.1.4.1.2637.2.1.3001.1.27	INTEGER	read-create	Specifies whether injection management (for holding data to prevent exceeding excess rates) is enabled on all circuits on this interface.
INT frInterfaceConfigFrDlcmiMaxFrameSize	1.3.6.1.4.1.2637.2.1.3001.1.28	INTEGER	read-create	Specifies maximum frame size allowed on this interface, including data link headers.
STR frInterfaceConfigFrDlcmiName	1.3.6.1.4.1.2637.2.1.3001.1.29	DisplayString	read-create	Frame Relay Interface Name
INT frInterfaceConfigFrDlcmiLmiDlci	1.3.6.1.4.1.2637.2.1.3001.1.30	INTEGER	read-create	The dlci upon which LMI traffic will be broadcast.
INT frInterfaceConfigFrDlcmiDceErrorThreshold	1.3.6.1.4.1.2637.2.1.3001.1.31	INTEGER	read-create	This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. This is equivalent to N392.
INT frInterfaceConfigFrDlcmiDceMonitoredEvents	1.3.6.1.4.1.2637.2.1.3001.1.32	INTEGER	read-create	This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down. This is equivalent to N393.
frLogicalIFConfigTable	1.3.6.1.4.1.2637.2.1.3003		not-accessible	Frame Relay Logical Interface Configuration.
frLogicalIFConfigEntry	1.3.6.1.4.1.2637.2.1.3003.1		not-accessible	This is the structure of entries in the frLogicalIFConfigTable.
STR frLogicalIFConfigPathString	1.3.6.1.4.1.2637.2.1.3003.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW frLogicalIFConfigRowStatus	1.3.6.1.4.1.2637.2.1.3003.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT frLogicalIFConfigKeyValue	1.3.6.1.4.1.2637.2.1.3003.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT frLogicalIFConfigFrLIFIfIndex	1.3.6.1.4.1.2637.2.1.3003.1.11	INTEGER	read-create	This is the frDlcmiIfIndex for this Logical Interface
INT frLogicalIFConfigFrLIFIndex	1.3.6.1.4.1.2637.2.1.3003.1.12	INTEGER	read-create	Unique identifier that identifies this Frame Relay LIF configuration.
INT frLogicalIFConfigFrLIFEnable	1.3.6.1.4.1.2637.2.1.3003.1.13	INTEGER	read-create	Specifies whether this interface is to be activated.
STR frLogicalIFConfigFrLIFName	1.3.6.1.4.1.2637.2.1.3003.1.14	DisplayString	read-create	Logical Interface Name
frCircuitConfigTable	1.3.6.1.4.1.2637.2.1.3004		not-accessible	Frame Relay Circuit Configuration.
frCircuitConfigEntry	1.3.6.1.4.1.2637.2.1.3004.1		not-accessible	This is the structure of entries in the frCircuitConfigTable.
STR frCircuitConfigPathString	1.3.6.1.4.1.2637.2.1.3004.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW frCircuitConfigRowStatus	1.3.6.1.4.1.2637.2.1.3004.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT frCircuitConfigKeyValue	1.3.6.1.4.1.2637.2.1.3004.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT frCircuitConfigFrCircuitIfIndex	1.3.6.1.4.1.2637.2.1.3004.1.11	INTEGER	read-create	This is the frDlcmiIfIndex for this Circuit
INT frCircuitConfigFrCircuitLIFIndex	1.3.6.1.4.1.2637.2.1.3004.1.12	INTEGER	read-create	Unique identifier that identifies the Frame Relay LIF for this Circuit
INT frCircuitConfigFrCircuitDlci	1.3.6.1.4.1.2637.2.1.3004.1.13	INTEGER	read-create	The Data Link Connection Identifier for this virtual circuit.
INT frCircuitConfigFrCircuitCommittedBurst	1.3.6.1.4.1.2637.2.1.3004.1.15	INTEGER	read-create	This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval. If Bc > 0, then CIR must be set to a non-zero value
INT frCircuitConfigFrCircuitExcessBurst	1.3.6.1.4.1.2637.2.1.3004.1.16	INTEGER	read-create	This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
INT frCircuitConfigFrCircuitThroughput	1.3.6.1.4.1.2637.2.1.3004.1.17	INTEGER	read-create	Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval. If the configured committed burst rate and throughput are both non-zero, the measurement interval, T, is T=frCircuitCommittedBurst/frCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement interval, T, is T=frCircuitExcessBurst/ifSpeed. If CIR > 0, then Bc must be set to a non-zero value
INT frCircuitConfigFrCircuitMulticast	1.3.6.1.4.1.2637.2.1.3004.1.18	INTEGER	read-create	This indicates whether this VC is used as a unicast VC (i.e. not multicast). Currently, if not unicast, then multicast.
INT frCircuitConfigFrCircuitVCCEnable	1.3.6.1.4.1.2637.2.1.3004.1.21	INTEGER	read-create	NOT USED
INT frCircuitConfigFrCircuitCommittedBurstMin	1.3.6.1.4.1.2637.2.1.3004.1.22	INTEGER	read-create	This variable indicates the minimum bound for the variable hjCircuitCommittedBurst. If a SET is received to this variable above the value of the variable CircuitCommittedBurst, the agent should respond bad-Value.
INT frCircuitConfigFrCircuitCongestionMonitorPeriod	1.3.6.1.4.1.2637.2.1.3004.1.23	INTEGER	read-create	The measurement interval for the Congestion Monitor, which determines whether to raise or lower the Commited Information Rate. This period is expressed in 100ths of a second.
STR frCircuitConfigFrCircuitName	1.3.6.1.4.1.2637.2.1.3004.1.24	DisplayString	read-create	FR Circuit Name
ethernetConfigTable	1.3.6.1.4.1.2637.2.1.3051		not-accessible	Ethernet configuration table.
ethernetConfigEntry	1.3.6.1.4.1.2637.2.1.3051.1		not-accessible	This is the structure of entries in the ethernetConfigTable.
STR ethernetConfigPathString	1.3.6.1.4.1.2637.2.1.3051.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ethernetConfigRowStatus	1.3.6.1.4.1.2637.2.1.3051.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ethernetConfigKeyValue	1.3.6.1.4.1.2637.2.1.3051.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ethernetConfigEthernetPhyPort	1.3.6.1.4.1.2637.2.1.3051.1.11	INTEGER	read-create	This value indicates the physical port identifier for this slot.
INT ethernetConfigEthernetEnable	1.3.6.1.4.1.2637.2.1.3051.1.12	INTEGER	read-create	Specifies whether this interface is to be activated.
INT ethernetConfigEthernetTlen	1.3.6.1.4.1.2637.2.1.3051.1.13	INTEGER	read-create	Sets the size of the Transmit Buffer Ring for the Ethernet driver.
INT ethernetConfigEthernetRlen	1.3.6.1.4.1.2637.2.1.3051.1.14	INTEGER	read-create	Sets the size of the Receive Buffer Ring for the Ethernet driver.
INT ethernetConfigEthernetAutoneg	1.3.6.1.4.1.2637.2.1.3051.1.15	INTEGER	read-create	Ethernet auto-negotiation flag.
INT ethernetConfigEthernetPortspeed	1.3.6.1.4.1.2637.2.1.3051.1.16	INTEGER	read-create	Ethernet port speed.
INT ethernetConfigEthernetFullduplex	1.3.6.1.4.1.2637.2.1.3051.1.17	INTEGER	read-create	Control whether interface is configured for FullDuplex or not.
INT ethernetConfigEthernetPromEnable	1.3.6.1.4.1.2637.2.1.3051.1.18	INTEGER	read-create	Ethernet promiscuous mode flag.
INT ethernetConfigEthernetBcastControl	1.3.6.1.4.1.2637.2.1.3051.1.19	INTEGER	read-create	Control the receiving of Broadcast frames on this interface.
INT ethernetConfigEthernetFCSControl	1.3.6.1.4.1.2637.2.1.3051.1.20	INTEGER	read-create	Control adding FCS on transmitted frames on this interface.
INT ethernetConfigEthernetLoopback	1.3.6.1.4.1.2637.2.1.3051.1.21	INTEGER	read-create	Configures the port to be either no Loopback, Internal Loopback, External Loopback or MII Loopback.
INT ethernetConfigEthernetLinkTest	1.3.6.1.4.1.2637.2.1.3051.1.22	INTEGER	read-create	Configures the port to be, for 10BASE-T, to disable Link Test Functionality which is used to determine link integrity by listening for link beat pulses. Setting this attribute will disable link beat pulse detection.
ipWin32Table	1.3.6.1.4.1.2637.2.1.3052		not-accessible	win32 ethernet connection
ipWin32Entry	1.3.6.1.4.1.2637.2.1.3052.1		not-accessible	This is the structure of entries in the ipWin32Table.
STR ipWin32PathString	1.3.6.1.4.1.2637.2.1.3052.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipWin32RowStatus	1.3.6.1.4.1.2637.2.1.3052.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipWin32KeyValue	1.3.6.1.4.1.2637.2.1.3052.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipWin32Instance	1.3.6.1.4.1.2637.2.1.3052.1.11	INTEGER	read-create	Instance of Ethernet connection.
STR ipWin32Devname	1.3.6.1.4.1.2637.2.1.3052.1.12	DisplayString	read-create	Ethernet connection device name.
loopbackConfigTable	1.3.6.1.4.1.2637.2.1.3101		not-accessible	Loopback Configuration.
loopbackConfigEntry	1.3.6.1.4.1.2637.2.1.3101.1		not-accessible	This is the structure of entries in the loopbackConfigTable.
STR loopbackConfigPathString	1.3.6.1.4.1.2637.2.1.3101.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW loopbackConfigRowStatus	1.3.6.1.4.1.2637.2.1.3101.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT loopbackConfigKeyValue	1.3.6.1.4.1.2637.2.1.3101.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT loopbackConfigMode	1.3.6.1.4.1.2637.2.1.3101.1.11	INTEGER	read-create	What to do with packets sent to this interface while in loopback mode.
INT loopbackConfigAdminState	1.3.6.1.4.1.2637.2.1.3101.1.12	INTEGER	read-create	Loopback configuration AdminState.
hSSIConfigTable	1.3.6.1.4.1.2637.2.1.3151		not-accessible	High Speed Serial Interface (HSSI) Information.
hSSIConfigEntry	1.3.6.1.4.1.2637.2.1.3151.1		not-accessible	This is the structure of entries in the hSSIConfigTable.
STR hSSIConfigPathString	1.3.6.1.4.1.2637.2.1.3151.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW hSSIConfigRowStatus	1.3.6.1.4.1.2637.2.1.3151.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT hSSIConfigKeyValue	1.3.6.1.4.1.2637.2.1.3151.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT hSSIConfigHSSIPhyPort	1.3.6.1.4.1.2637.2.1.3151.1.11	INTEGER	read-create	This value indicates the physical port identifier for this slot.
INT hSSIConfigHSSIEnable	1.3.6.1.4.1.2637.2.1.3151.1.12	INTEGER	read-create	Specifies whether the HSSI interface is to be activated.
STR hSSIConfigHSSIName	1.3.6.1.4.1.2637.2.1.3151.1.13	DisplayString	read-create	HSSI Name.
BOO hSSIConfigHSSIDelineation	1.3.6.1.4.1.2637.2.1.3151.1.14	Boolean	read-create	For the given HSSI, flag sequence insertion and bit stuffing is performed on the data stream. If TRUE, then flag sequence insertion and bit stuffing is performed.
INT hSSIConfigHSSICRCType	1.3.6.1.4.1.2637.2.1.3151.1.15	INTEGER	read-create	HSSI CRC generation for outgoing data stream. CRCTYPE is ignored when HSSI Delineation is FALSE.
INT hSSIConfigHSSIIdle	1.3.6.1.4.1.2637.2.1.3151.1.16	INTEGER	read-create	Indicates that the HSSI should use flag bytes or HDLC idle as the interframe time fill between HSSI packets.
INT hSSIConfigHSSILoopback	1.3.6.1.4.1.2637.2.1.3151.1.17	INTEGER	read-create	Indicates that the HSSI should be put into internal loopback mode.
INT hSSIConfigHSSIClock	1.3.6.1.4.1.2637.2.1.3151.1.18	INTEGER	read-create	Indicates that the HSSI should be put into internal or external clocking.
INT hSSIConfigHSSIQueueDepth	1.3.6.1.4.1.2637.2.1.3151.1.19	INTEGER	read-create	Internal queue depth for data to be transmitted by HSSI. Once queue depth is reached, data will be dropped until queue depth empties beyond this value. Data dropped is clipped from end of queue.
callInfoTable	1.3.6.1.4.1.2637.2.1.4002		not-accessible	Call Configuration Information.
callInfoEntry	1.3.6.1.4.1.2637.2.1.4002.1		not-accessible	This is the structure of entries in the callInfoTable.
STR callInfoPathString	1.3.6.1.4.1.2637.2.1.4002.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW callInfoRowStatus	1.3.6.1.4.1.2637.2.1.4002.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT callInfoKeyValue	1.3.6.1.4.1.2637.2.1.4002.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT callInfoShelf	1.3.6.1.4.1.2637.2.1.4002.1.11	INTEGER	read-create	CVX shelf number.
INT callInfoSlot	1.3.6.1.4.1.2637.2.1.4002.1.12	INTEGER	read-create	CVX slot number.
INT callInfoPort	1.3.6.1.4.1.2637.2.1.4002.1.13	INTEGER	read-create	CVX DSL port.
INT callInfoDs0	1.3.6.1.4.1.2637.2.1.4002.1.14	INTEGER	read-create	CVX DS0.
INT callInfoVpopId	1.3.6.1.4.1.2637.2.1.4002.1.15	INTEGER	read-create	CVX VPOP id.
INT callInfoCallType	1.3.6.1.4.1.2637.2.1.4002.1.20	INTEGER	read-create	bit field indicating call type
INT callInfoFeature	1.3.6.1.4.1.2637.2.1.4002.1.21	INTEGER	read-create	CVX feature.
INT callInfoCallingNumberType	1.3.6.1.4.1.2637.2.1.4002.1.30	INTEGER	read-create	Calling number type.
INT callInfoCallingNumberPlan	1.3.6.1.4.1.2637.2.1.4002.1.31	INTEGER	read-create	Calling number plan.
INT callInfoCallingOptions	1.3.6.1.4.1.2637.2.1.4002.1.32	INTEGER	read-create	Calling number options.
STR callInfoCallingNumber	1.3.6.1.4.1.2637.2.1.4002.1.33	DisplayString	read-create	Calling number.
INT callInfoCallingSubaddressType	1.3.6.1.4.1.2637.2.1.4002.1.34	INTEGER	read-create	Calling number subaddress type.
STR callInfoCallingSubaddress	1.3.6.1.4.1.2637.2.1.4002.1.35	DisplayString	read-create	Calling number subaddress.
INT callInfoCalledNumberType	1.3.6.1.4.1.2637.2.1.4002.1.40	INTEGER	read-create	Called number type.
INT callInfoCalledNumberPlan	1.3.6.1.4.1.2637.2.1.4002.1.41	INTEGER	read-create	Called number plan.
INT callInfoCalledOptions	1.3.6.1.4.1.2637.2.1.4002.1.42	INTEGER	read-create	Called number options.
STR callInfoCalledNumber	1.3.6.1.4.1.2637.2.1.4002.1.43	DisplayString	read-create	Called number.
INT callInfoCalledSubaddressType	1.3.6.1.4.1.2637.2.1.4002.1.44	INTEGER	read-create	Called number subaddress type.
STR callInfoCalledSubaddress	1.3.6.1.4.1.2637.2.1.4002.1.45	DisplayString	read-create	Called number subaddress.
INT callInfoCallBearerType	1.3.6.1.4.1.2637.2.1.4002.1.46	INTEGER	read-create	Call bearer type.
INT callInfoCallBearerRate	1.3.6.1.4.1.2637.2.1.4002.1.47	INTEGER	read-create	Call bearer rate.
dialedNumberTable	1.3.6.1.4.1.2637.2.1.4004		not-accessible	VPOP Dialed Number Table.
dialedNumberEntry	1.3.6.1.4.1.2637.2.1.4004.1		not-accessible	This is the structure of entries in the dialedNumberTable.
STR dialedNumberPathString	1.3.6.1.4.1.2637.2.1.4004.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW dialedNumberRowStatus	1.3.6.1.4.1.2637.2.1.4004.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT dialedNumberKeyValue	1.3.6.1.4.1.2637.2.1.4004.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR dialedNumberNumber	1.3.6.1.4.1.2637.2.1.4004.1.11	DisplayString	read-create	Dialed number to match for VPOP; \n\r'*' will match rest of string; '?' is a single char wild card
INT dialedNumberVpop	1.3.6.1.4.1.2637.2.1.4004.1.12	INTEGER	read-create	Vpop assigned to this Dialed Number
vpopConfigTable	1.3.6.1.4.1.2637.2.1.4005		not-accessible	VPOP Configuration Table.
vpopConfigEntry	1.3.6.1.4.1.2637.2.1.4005.1		not-accessible	This is the structure of entries in the vpopConfigTable.
STR vpopConfigPathString	1.3.6.1.4.1.2637.2.1.4005.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW vpopConfigRowStatus	1.3.6.1.4.1.2637.2.1.4005.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT vpopConfigKeyValue	1.3.6.1.4.1.2637.2.1.4005.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR vpopConfigName	1.3.6.1.4.1.2637.2.1.4005.1.11	DisplayString	read-create	name of VPOP
INT vpopConfigAuthenticationServerGroup	1.3.6.1.4.1.2637.2.1.4005.1.20	INTEGER	read-create	key of AAA server group to use for authentication
INT vpopConfigAuthorizationServerGroup	1.3.6.1.4.1.2637.2.1.4005.1.21	INTEGER	read-create	key of AAA server group to use for authorization
INT vpopConfigAccountingServerGroup	1.3.6.1.4.1.2637.2.1.4005.1.22	INTEGER	read-create	key of AAA server group to use for accounting
BOO vpopConfigPrivateFlag	1.3.6.1.4.1.2637.2.1.4005.1.28	Boolean	read-create	if true, don't advertise session routes via rip/ospf
INT vpopConfigRouteAdvertise	1.3.6.1.4.1.2637.2.1.4005.1.30	INTEGER	read-create	method of advertising dynamic session routes
INT vpopConfigMaxSessions	1.3.6.1.4.1.2637.2.1.4005.1.31	INTEGER	read-create	Number of sessions allowed for this Vpop, 0 for unlimited
INT vpopConfigAddressMode	1.3.6.1.4.1.2637.2.1.4005.1.32	INTEGER	read-create	ip address allocation mode
IP vpopConfigLocalAddress	1.3.6.1.4.1.2637.2.1.4005.1.33	IpAddress	read-create	local (NAS-side) address of dial-up connections
BOO vpopConfigAOLAuthLocal	1.3.6.1.4.1.2637.2.1.4005.1.34	Boolean	read-create	Check well-known America Online user names and passwords locally, without forwarding them to an authentication server.
INT vpopConfigTunnelGroup	1.3.6.1.4.1.2637.2.1.4005.1.35	INTEGER	read-create	Key of tunnel group to use. If 0, calls to this VPOP will not be tunneled. If non-zero, all calls to this VPOP will be tunneled to the specified group.
INT vpopConfigAuthMethod	1.3.6.1.4.1.2637.2.1.4005.1.36	INTEGER	read-create	Authentication method of dialin users
INT vpopConfigVrouterId	1.3.6.1.4.1.2637.2.1.4005.1.40	INTEGER	read-create	key of virtual router to use for this VPOP (0 for default)
INT vpopConfigMulticastClient	1.3.6.1.4.1.2637.2.1.4005.1.41	INTEGER	read-create	default state of multicast for vpop clients; if disabled, vpop clients are never allowed to do multicast routing
BOO vpopConfigAdvertiseRadiusRoutes	1.3.6.1.4.1.2637.2.1.4005.1.42	Boolean	read-create	Advertise RADIUS assigned session routes.
BOO vpopConfigVoiceMode	1.3.6.1.4.1.2637.2.1.4005.1.43	Boolean	read-create	All calls to this VPOP will be treated like voice mode calls.
INT vpopConfigGatewayType	1.3.6.1.4.1.2637.2.1.4005.1.44	INTEGER	read-create	Type of gateway used for processing calls on this VPOP
IP vpopConfigSourceIpAddress	1.3.6.1.4.1.2637.2.1.4005.1.50	IpAddress	read-create	Source IP address for this VPOP
INT vpopConfigMultilinkTunnelGroup	1.3.6.1.4.1.2637.2.1.4005.1.51	INTEGER	read-create	Key of tunnel group to use for all multilink PPP calls. If non-zero, all multilink PPP calls to this VPOP will be tunneled to the specified group. If 0, the 'TunnelGroup' parameter determines if and where multilink PPP calls are tunneled.
BOO vpopConfigUseIPPoolFromOtherVPOP	1.3.6.1.4.1.2637.2.1.4005.1.52	Boolean	read-create	If TRUE, this VPOP will local pools from the IPPoolVPOP
INT vpopConfigIPPoolVPOP	1.3.6.1.4.1.2637.2.1.4005.1.53	INTEGER	read-create	key of VPOP whose IP pools will be used if UseIPPoolFromOtherVPOP is TRUE
BOO vpopConfigPreserveTunnelInfo	1.3.6.1.4.1.2637.2.1.4005.1.55	Boolean	read-create	Preserve existing Tunnel Info across a VPOP move
BOO vpopConfigGratuitousArpEnabled	1.3.6.1.4.1.2637.2.1.4005.1.56	Boolean	read-create	State whether gratuiotous arp is enabled for this vpop
BOO vpopConfigMLPSubsequentLinkAuth	1.3.6.1.4.1.2637.2.1.4005.1.57	Boolean	read-create	If false, subsequent links of an MLP bundle are not authenticated
BOO vpopConfigSendIPHint	1.3.6.1.4.1.2637.2.1.4005.1.59	Boolean	read-create	Send the Framed IP address attribute in the Radius Request packet with the proposed IP address
BOO vpopConfigFilterErrorEnable	1.3.6.1.4.1.2637.2.1.4005.1.60	Boolean	read-create	If a RADIUS Filter-Id attribute is received and the filter list name does not exist on the switch, drop the call and send a cvx-filter-error trap.
STR vpopConfigL2TPDefaultSendName	1.3.6.1.4.1.2637.2.1.4005.1.70	DisplayString	read-create	Default name to send as the Host name in the L2TP Start Control Channel Request packet to open a tunnel. This will be used if the SendName is not specified in the L2TP_LNS configuration or if it is not returned from a RADIUS server.
STR vpopConfigL2TPDefaultSharedSecret	1.3.6.1.4.1.2637.2.1.4005.1.71	DisplayString	read-create	Default Shared Secret to use when opening a tunnel to the LNS. This will be used if the SharedSecret is not specified in the L2TP_LNS configuration or if it is not returned from a RADIUS server.
organizationNameTable	1.3.6.1.4.1.2637.2.1.4006		not-accessible	Organization Identification Table.
organizationNameEntry	1.3.6.1.4.1.2637.2.1.4006.1		not-accessible	This is the structure of entries in the organizationNameTable.
STR organizationNamePathString	1.3.6.1.4.1.2637.2.1.4006.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW organizationNameRowStatus	1.3.6.1.4.1.2637.2.1.4006.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT organizationNameKeyValue	1.3.6.1.4.1.2637.2.1.4006.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR organizationNameOrganizationName	1.3.6.1.4.1.2637.2.1.4006.1.11	DisplayString	read-create	String in the user name field that identifies the organization
INT organizationNameVPOP	1.3.6.1.4.1.2637.2.1.4006.1.12	INTEGER	read-create	VPOP associated with this organization name
INT organizationNameTunnelGroup	1.3.6.1.4.1.2637.2.1.4006.1.13	INTEGER	read-create	Key of tunnel appropriate tunnel group to use.
INT organizationNameInputStyle	1.3.6.1.4.1.2637.2.1.4006.1.111	INTEGER	read-create	Specifies the format of the user name field that is received by the CVX from the remote user.
STR organizationNameInputTemplateString	1.3.6.1.4.1.2637.2.1.4006.1.112	DisplayString	read-create	Specifies the template for user name field received from remote user. This option is currently not implemented.
INT organizationNameOutputStyle	1.3.6.1.4.1.2637.2.1.4006.1.211	INTEGER	read-create	Specifies the format of the user name that is sent to the authentication server (such as a RADIUS server) by the CVX.
STR organizationNameOutputTemplateString	1.3.6.1.4.1.2637.2.1.4006.1.212	DisplayString	read-create	Specifies the template for user name sent to the authentication server. This option is currently not implemented.
pppLocalSessionTable	1.3.6.1.4.1.2637.2.1.4008		not-accessible	PPP Local Session Table.
pppLocalSessionEntry	1.3.6.1.4.1.2637.2.1.4008.1		not-accessible	This is the structure of entries in the pppLocalSessionTable.
STR pppLocalSessionPathString	1.3.6.1.4.1.2637.2.1.4008.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW pppLocalSessionRowStatus	1.3.6.1.4.1.2637.2.1.4008.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT pppLocalSessionKeyValue	1.3.6.1.4.1.2637.2.1.4008.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
BOO pppLocalSessionVJEnabled	1.3.6.1.4.1.2637.2.1.4008.1.11	Boolean	read-create	Enable VJ TCP/IP header compression
INT pppLocalSessionConnectLimit	1.3.6.1.4.1.2637.2.1.4008.1.12	INTEGER	read-create	Overall connection time limit (in minutes, 0 = no limit)
INT pppLocalSessionInactivityLimit	1.3.6.1.4.1.2637.2.1.4008.1.13	INTEGER	read-create	Maximum inactivity time (in minutes) before user is disconnected (0 = no limit)
INT pppLocalSessionMLPMaxLinks	1.3.6.1.4.1.2637.2.1.4008.1.14	INTEGER	read-create	Maximum number of links permitted in a Multilink bundle
clearTcpLocalSessionTable	1.3.6.1.4.1.2637.2.1.4009		not-accessible	ClearTCP Local Session Table.
clearTcpLocalSessionEntry	1.3.6.1.4.1.2637.2.1.4009.1		not-accessible	This is the structure of entries in the clearTcpLocalSessionTable.
STR clearTcpLocalSessionPathString	1.3.6.1.4.1.2637.2.1.4009.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW clearTcpLocalSessionRowStatus	1.3.6.1.4.1.2637.2.1.4009.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT clearTcpLocalSessionKeyValue	1.3.6.1.4.1.2637.2.1.4009.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT clearTcpLocalSessionHostIpCount	1.3.6.1.4.1.2637.2.1.4009.1.11	INTEGER	read-create	number of IP addresses to try
IP clearTcpLocalSessionHostIp1	1.3.6.1.4.1.2637.2.1.4009.1.12	IpAddress	read-create	ip address to try (up to 5)
IP clearTcpLocalSessionHostIp2	1.3.6.1.4.1.2637.2.1.4009.1.13	IpAddress	read-create	ip address to try (up to 5)
IP clearTcpLocalSessionHostIp3	1.3.6.1.4.1.2637.2.1.4009.1.14	IpAddress	read-create	ip address to try (up to 5)
IP clearTcpLocalSessionHostIp4	1.3.6.1.4.1.2637.2.1.4009.1.15	IpAddress	read-create	ip address to try (up to 5)
IP clearTcpLocalSessionHostIp5	1.3.6.1.4.1.2637.2.1.4009.1.16	IpAddress	read-create	ip address to try (up to 5)
INT clearTcpLocalSessionConnectType	1.3.6.1.4.1.2637.2.1.4009.1.17	INTEGER	read-create	ClearTCP connection type.
INT clearTcpLocalSessionRemotePort	1.3.6.1.4.1.2637.2.1.4009.1.18	INTEGER	read-create	ip port of remote tcp server
STR clearTcpLocalSessionHostName	1.3.6.1.4.1.2637.2.1.4009.1.19	DisplayString	read-create	DNS name of remote TCP server
ipLocalSessionTable	1.3.6.1.4.1.2637.2.1.4010		not-accessible	VPOP Local Session Table
ipLocalSessionEntry	1.3.6.1.4.1.2637.2.1.4010.1		not-accessible	This is the structure of entries in the ipLocalSessionTable.
STR ipLocalSessionPathString	1.3.6.1.4.1.2637.2.1.4010.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipLocalSessionRowStatus	1.3.6.1.4.1.2637.2.1.4010.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipLocalSessionKeyValue	1.3.6.1.4.1.2637.2.1.4010.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
IP ipLocalSessionRemoteIp	1.3.6.1.4.1.2637.2.1.4010.1.11	IpAddress	read-create	ip address for remote side of connection
IP ipLocalSessionRemoteMask	1.3.6.1.4.1.2637.2.1.4010.1.12	IpAddress	read-create	ip mask for remote side
IP ipLocalSessionLocalIp	1.3.6.1.4.1.2637.2.1.4010.1.13	IpAddress	read-create	ip address for local side of connection
BOO ipLocalSessionAcceptRip	1.3.6.1.4.1.2637.2.1.4010.1.14	Boolean	read-create	accept RIP?
INT ipLocalSessionFilterId	1.3.6.1.4.1.2637.2.1.4010.1.15	INTEGER	read-create	Local session filter id.
INT ipLocalSessionMtu	1.3.6.1.4.1.2637.2.1.4010.1.16	INTEGER	read-create	Local session mtu size.
INT ipLocalSessionPoolNumber	1.3.6.1.4.1.2637.2.1.4010.1.17	INTEGER	read-create	pool from which IP address was allocated
BOO ipLocalSessionRouteMulticast	1.3.6.1.4.1.2637.2.1.4010.1.18	Boolean	read-create	Local session route multicast?
INT ipLocalSessionRateLimitMulticast	1.3.6.1.4.1.2637.2.1.4010.1.19	INTEGER	read-create	Local session rate limit on multicast.
BOO ipLocalSessionFramedRouting	1.3.6.1.4.1.2637.2.1.4010.1.20	Boolean	read-create	Local session framed routing?
localUsersTable	1.3.6.1.4.1.2637.2.1.4011		not-accessible	Local VPOP user authentication information
localUsersEntry	1.3.6.1.4.1.2637.2.1.4011.1		not-accessible	This is the structure of entries in the localUsersTable.
STR localUsersPathString	1.3.6.1.4.1.2637.2.1.4011.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW localUsersRowStatus	1.3.6.1.4.1.2637.2.1.4011.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT localUsersKeyValue	1.3.6.1.4.1.2637.2.1.4011.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
STR localUsersUsername	1.3.6.1.4.1.2637.2.1.4011.1.11	DisplayString	read-create	the user name
STR localUsersPassword	1.3.6.1.4.1.2637.2.1.4011.1.12	DisplayString	read-create	the password associated with the user name
STR localUsersUserInformation	1.3.6.1.4.1.2637.2.1.4011.1.13	DisplayString	read-create	information of user
ipSessionAccessListTable	1.3.6.1.4.1.2637.2.1.4012		not-accessible	ip session access list filter entry; defines IP filter
ipSessionAccessListEntry	1.3.6.1.4.1.2637.2.1.4012.1		not-accessible	This is the structure of entries in the ipSessionAccessListTable.
STR ipSessionAccessListPathString	1.3.6.1.4.1.2637.2.1.4012.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW ipSessionAccessListRowStatus	1.3.6.1.4.1.2637.2.1.4012.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT ipSessionAccessListKeyValue	1.3.6.1.4.1.2637.2.1.4012.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT ipSessionAccessListFilterStatus	1.3.6.1.4.1.2637.2.1.4012.1.11	INTEGER	read-create	Status of this filter.
INT ipSessionAccessListFilterType	1.3.6.1.4.1.2637.2.1.4012.1.12	INTEGER	read-create	The type of this filter.
INT ipSessionAccessListMode	1.3.6.1.4.1.2637.2.1.4012.1.13	INTEGER	read-create	set to drop or pass packet if entry matches
INT ipSessionAccessListProtocol	1.3.6.1.4.1.2637.2.1.4012.1.14	INTEGER	read-create	IP protocol field to match
IP ipSessionAccessListSourceIp	1.3.6.1.4.1.2637.2.1.4012.1.20	IpAddress	read-create	source IP address prefix to match
IP ipSessionAccessListSourceMask	1.3.6.1.4.1.2637.2.1.4012.1.21	IpAddress	read-create	mask applied to source IP address before matching
IP ipSessionAccessListDestinationIp	1.3.6.1.4.1.2637.2.1.4012.1.22	IpAddress	read-create	destination IP address prefix to match
IP ipSessionAccessListDestinationMask	1.3.6.1.4.1.2637.2.1.4012.1.23	IpAddress	read-create	mask applied to destination IP address before matching
INT ipSessionAccessListCompare	1.3.6.1.4.1.2637.2.1.4012.1.30	INTEGER	read-create	method of comparison for destination UDP/TCP port
INT ipSessionAccessListDestinationPort	1.3.6.1.4.1.2637.2.1.4012.1.31	INTEGER	read-create	if protocol is UDP or TCP, the port number to compare against
INT ipSessionAccessListIcmpType	1.3.6.1.4.1.2637.2.1.4012.1.32	INTEGER	read-create	if protocol is ICMP, the ICMP type to compare against
INT ipSessionAccessListIcmpCode	1.3.6.1.4.1.2637.2.1.4012.1.33	INTEGER	read-create	if protocol is ICMP, the ICMP code to compare against
INT ipSessionAccessListIgmpType	1.3.6.1.4.1.2637.2.1.4012.1.34	INTEGER	read-create	if protocol is IGMP, the IGMP type to compare against
INT ipSessionAccessListTcpFlag	1.3.6.1.4.1.2637.2.1.4012.1.35	INTEGER	read-create	if protocol is TCP, the TCP flags to compare against
callTypeOverrideTable	1.3.6.1.4.1.2637.2.1.4013		not-accessible	Call Type Override Table.
callTypeOverrideEntry	1.3.6.1.4.1.2637.2.1.4013.1		not-accessible	This is the structure of entries in the callTypeOverrideTable.
STR callTypeOverridePathString	1.3.6.1.4.1.2637.2.1.4013.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW callTypeOverrideRowStatus	1.3.6.1.4.1.2637.2.1.4013.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT callTypeOverrideKeyValue	1.3.6.1.4.1.2637.2.1.4013.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
INT callTypeOverridePresentedCallType	1.3.6.1.4.1.2637.2.1.4013.1.11	INTEGER	read-create	Incoming call type to override
INT callTypeOverrideOverrideCallType	1.3.6.1.4.1.2637.2.1.4013.1.12	INTEGER	read-create	Overriding call type
udlConfigTable	1.3.6.1.4.1.2637.2.1.4053		not-accessible	NCP/UDL Configuration.
udlConfigEntry	1.3.6.1.4.1.2637.2.1.4053.1		not-accessible	This is the structure of entries in the udlConfigTable.
STR udlConfigPathString	1.3.6.1.4.1.2637.2.1.4053.1.1	DisplayString	read-create	The absolute path to where this object resides in the Resource Manager tree.
ROW udlConfigRowStatus	1.3.6.1.4.1.2637.2.1.4053.1.2	RowStatus	read-create	This object is used to create a new row, or to modify or delete an existing row in this table.
INT udlConfigKeyValue	1.3.6.1.4.1.2637.2.1.4053.1.3	INTEGER	read-create	The Key for this instance of the object in the Resource Manager tree.
BOO udlConfigEnabled	1.3.6.1.4.1.2637.2.1.4053.1.11	Boolean	read-create	UDL enabled?
IP udlConfigIpaddress	1.3.6.1.4.1.2637.2.1.4053.1.12	IpAddress	read-create	UDL IP Address.
IP udlConfigIpmask	1.3.6.1.4.1.2637.2.1.4053.1.13	IpAddress	read-create	UDL IP Mask.
IP udlConfigDumpserver	1.3.6.1.4.1.2637.2.1.4053.1.14	IpAddress	read-create	UDL Dumpserver.
STR udlConfigDumpfile	1.3.6.1.4.1.2637.2.1.4053.1.15	DisplayString	read-create	UDL Dumpfile.

RFC description

Configurable element management for Nortel Aptis call gateway systems.

Start monitoring Nortel Networks Aptis DSL concentrator/access multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download APTIS-CONFIG-MIB

What Is APTIS-CONFIG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description