PDN-PPP-ML-MIB

All MIBs › PDN-PPP-ML-MIB

Organization: Paradyne Networks MIB Working Group Other information about group editing the MIB

Last Updated: 2004-09-14

Category: DSL and Broadband

Description: Manages PPP Multilink Protocol (MP) bundle configuration, member link status, and fragmentation settings on Paradyne devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PDN-PPP-ML-MIB?

PDN-PPP-ML-MIB is a Paradyne Networks proprietary MIB (extending PDN-HEADER-MIB) implementing Multilink PPP (RFC 1990) bundle management. Its bundle-configuration table, keyed by ifIndex, records row status, Maximum Received Reconstructed Unit (MRRU), Short-Sequence-Number-Header-Format (SSNHF) flag, and fragment size, a bundle-mapping table associates member links to their parent bundle, and a bundle-status table reports current state, negotiated local-to-remote/remote-to-local MRRU and SSNHF, and endpoint-discriminator class/address in both directions. As a configuration/status MIB it lets an administrator confirm negotiated MRRU and endpoint-discriminator matching when a Multilink PPP bundle fails to form correctly. It is deployed on Paradyne Networks routers using Multilink PPP. Engineers can download the PDN-PPP-ML-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PDN-PPP-ML-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Paradyne Networks routers (Multilink PPP)

Monitoring Examples

An administrator checks pdnPppMlBundleStatusLocalToRemoteMRRU against the remote side's negotiated value to diagnose a Multilink PPP bundle that isn't combining member links as expected on a Paradyne router.

What Can Be Monitored

Multilink PPP bundle negotiation and member-link status

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From PDN-HEADER-MIB

pdn-interfaces

From PDN-TC

PdnPPPState
SwitchState

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
pdnPppMlMIB	1.3.6.1.4.1.1795.2.24.2.6.30			The MIB module for configuring and managing multilink PPP. The following documents should be referenced with respect to this MIB: [PPP] Carlson, J, `PPP Design and Debugging', Addison-Wesley, December 1997. [RFC 1661] Simpson, W., `The Point-to-Point Protocol', July 1994. [RFC 1990] Sklower, K. et al., `The PPP Multilink Protocol (MP)', August 1996.
pdnPppMlNotifications	1.3.6.1.4.1.1795.2.24.2.6.30.0
pdnPppMlObjects	1.3.6.1.4.1.1795.2.24.2.6.30.1
U32 pdnPppMlBundleNumber	1.3.6.1.4.1.1795.2.24.2.6.30.1.1	Unsigned32	read-only	The number of multilink PPP bundles configured on this system.
pdnPppMlBundleConfigTable	1.3.6.1.4.1.1795.2.24.2.6.30.1.2		not-accessible	The Multilink PPP Bundle Configuration Table.
pdnPppMlBundleConfigEntry	1.3.6.1.4.1.1795.2.24.2.6.30.1.2.1		not-accessible	An entry in the Multilink PPP Configuration Table.
NUM pdnPppMlBundleIfIndex	1.3.6.1.4.1.1795.2.24.2.6.30.1.2.1.1	InterfaceIndex	not-accessible	Identifies the interface number assigned to this bundle and is used to identify corresponding rows in the Interfaces MIB.
ROW pdnPppMlBundleConfigRowStatus	1.3.6.1.4.1.1795.2.24.2.6.30.1.2.1.2	RowStatus	read-create	Used to create, modify, or delete rows in the table.
MRR pdnPppMlBundleConfigMRRU	1.3.6.1.4.1.1795.2.24.2.6.30.1.2.1.3	MRRU	read-create	The Multilink Maximum Received Reconstructed Units LCP option. This option specifies the maximum number of octets in the Information fields of reassembled packets.
SWI pdnPppMlBundleConfigSSNHF	1.3.6.1.4.1.1795.2.24.2.6.30.1.2.1.4	SwitchState	read-create	The Short Sequence Number Header Format option. When set to enabled(1), the local PPP entity will indicate to the remote PPP entity that fragments with 12-bit sequence numbers are desired. When set to disabled(2), the local PPP entity will indicate to the remote PPP entity that fragments with 24-bit sequence numbers are desired.
U32 pdnPppMlBundleConfigFragmentSize	1.3.6.1.4.1.1795.2.24.2.6.30.1.2.1.5	Unsigned32	read-create	Configures the maximum number of octets of data in the packet's fragment data field. The value `0' has a special meaning which is to say `fragmentation is disabled'.
pdnPppMlBundleMappingTable	1.3.6.1.4.1.1795.2.24.2.6.30.1.3		not-accessible	The Multilink PPP Bundle Mapping Table. A table mapping the ifIndex of interfaces to a particular multilink PPP bundle identified by the pdnPppMlBundleIfIndex.
pdnPppMlBundleMappingEntry	1.3.6.1.4.1.1795.2.24.2.6.30.1.3.1		not-accessible	Each row describes one ifIndex to pdnPppMlBundleIfIndex mapping.
ROW pdnPppMlBundleMappingRowStatus	1.3.6.1.4.1.1795.2.24.2.6.30.1.3.1.1	RowStatus	read-create	Used to create, modify, or delete rows in the table.
NUM pdnPppMlBundleMappingBundleIfIndex	1.3.6.1.4.1.1795.2.24.2.6.30.1.3.1.2	InterfaceIndex	read-create	The pdnPppMlBundleIndex of the PPP bundle which implements the specified interface.
pdnPppMlBundleStatusTable	1.3.6.1.4.1.1795.2.24.2.6.30.1.4		not-accessible	The Multilink PPP Bundle Status Table.
pdnPppMlBundleStatusEntry	1.3.6.1.4.1.1795.2.24.2.6.30.1.4.1		not-accessible	An entry in the Multilink PPP Status Table.
PDN pdnPppMlBundleStatusCurrState	1.3.6.1.4.1.1795.2.24.2.6.30.1.4.1.1	PdnPPPState	read-only	The current state of the ML PPP State Machine.
MRR pdnPppMlBundleStatusLocalToRemoteMRRU	1.3.6.1.4.1.1795.2.24.2.6.30.1.4.1.2	MRRU	read-only	Identifies the result of the negotiation for the Multilink Maximum Received Reconstructed Units LCP option for the local to remote direction.
MRR pdnPppMlBundleStatusRemoteToLocalMRRU	1.3.6.1.4.1.1795.2.24.2.6.30.1.4.1.3	MRRU	read-only	Identifies the result of the negotiation for the Multilink Maximum Received Reconstructed Units LCP option for the remote to local direction.
SSN pdnPppMlBundleStatusLocalToRemoteSSNHF	1.3.6.1.4.1.1795.2.24.2.6.30.1.4.1.4	SSNHF	read-only	Identifies the result of the negotiation for the Short Sequence Number Header Format option for the local to remote direction. If negotiation has not completed, ssnhfUnknown(1) will be returned.
SSN pdnPppMlBundleStatusRemoteToLocalSSNHF	1.3.6.1.4.1.1795.2.24.2.6.30.1.4.1.5	SSNHF	read-only	Identifies the result of the negotiation for the Short Sequence Number Header Format option for the remote to local direction. If negotiation has not completed, ssnhfUnknown(1) will be returned.
EDC pdnPppMlBundleStatusLocalToRemoteEDClass	1.3.6.1.4.1.1795.2.24.2.6.30.1.4.1.6	EDClass	read-only	Identifies the result of the negotiation for the Endpoint Discriminator Option's class for the local PPP entity.
STR pdnPppMlBundleStatusLocalToRemoteEDAddr	1.3.6.1.4.1.1795.2.24.2.6.30.1.4.1.7	DisplayString	read-only	Identifies the result of the negotiation for the Endpoint Discriminator Option's address for the local PPP entity.
EDC pdnPppMlBundleStatusRemoteToLocalEDClass	1.3.6.1.4.1.1795.2.24.2.6.30.1.4.1.8	EDClass	read-only	Identifies the result of the negotiation for the Endpoint Discriminator Option's class for the remote PPP entity.
STR pdnPppMlBundleStatusRemoteToLocalEDAddr	1.3.6.1.4.1.1795.2.24.2.6.30.1.4.1.9	DisplayString	read-only	Identifies the result of the negotiation for the Endpoint Discriminator Option's address for the remote PPP entity.
pdnPppMlAFNs	1.3.6.1.4.1.1795.2.24.2.6.30.2
pdnPppMlConformance	1.3.6.1.4.1.1795.2.24.2.6.30.3
pdnPppMlCompliances	1.3.6.1.4.1.1795.2.24.2.6.30.3.1
pdnPppMlCompliance	1.3.6.1.4.1.1795.2.24.2.6.30.3.1.1			The compliance statement for network elements implementing multilink PPP.
pdnPppMlGroups	1.3.6.1.4.1.1795.2.24.2.6.30.3.2
pdnPppMlObjGroups	1.3.6.1.4.1.1795.2.24.2.6.30.3.2.1
pdnPppMlBundleDefinitionGroup	1.3.6.1.4.1.1795.2.24.2.6.30.3.2.1.1			Define a bundle and map ifIndices to it.
pdnPppMlBundleStateMachineGroup	1.3.6.1.4.1.1795.2.24.2.6.30.3.2.1.2			Displays the ML PPP State Machine's state.
pdnPppMlBundleMRRUGroup	1.3.6.1.4.1.1795.2.24.2.6.30.3.2.1.3			Configures and displays the results of the negotiation of the Multilink Maximum Received Reconstructed Units LCP Option.
pdnPppMlBundleSSNHFGroup	1.3.6.1.4.1.1795.2.24.2.6.30.3.2.1.4			Configures and displays the results of the negotiation of the Short Sequence Number Header Format Option.
pdnPppMlBundleEDGroup	1.3.6.1.4.1.1795.2.24.2.6.30.3.2.1.5			Displays the results of the negotiation of the Endpoint Discriminator Option.
pdnPppMlBundleFragmentSizeGroup	1.3.6.1.4.1.1795.2.24.2.6.30.3.2.1.6			Configures the fragment size.
pdnPppMlAfnGroups	1.3.6.1.4.1.1795.2.24.2.6.30.3.2.2
pdnPppmlNtfyGroups	1.3.6.1.4.1.1795.2.24.2.6.30.3.2.3

RFC description

Manages multilink PPP (Point-to-Point Protocol) configuration and status on Paradyne networks.

Start monitoring Paradyne Networks routers, Multilink PPP (bundle configuration/status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PDN-PPP-ML-MIB

What Is PDN-PPP-ML-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description