PDN-DSL-ATM-BOND-MIB

All MIBs › PDN-DSL-ATM-BOND-MIB

Organization: Paradyne Networks, Inc. MIB Working Group

Last Updated: 2005-08-03

Category: DSL and Broadband

Description: Manages DSL ATM bonding group configuration, member line status, and aggregated throughput statistics on Paradyne xDSL equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PDN-DSL-ATM-BOND-MIB?

PDN-DSL-ATM-BOND-MIB is a Paradyne Networks, Inc. MIB Working Group proprietary MIB (built on PDN-HEADER-MIB, referencing ITU-T G.998.1) managing DSL bonding — combining multiple digital subscriber lines to transport a single ATM stream, filed as a temporary solution pending any future IETF/ATM Forum standard. Its group table, keyed by index, records row status, reference count, ifIndex, group ID, alarm-configuration-profile name, ATU-C/ATU-R max/min net data rate, ATU-C/ATU-R differential delay, and status-notification-enabled flag, while a mapping table links each DSL bearer/ifIndex to its bonding group. As a configuration/status MIB it lets an administrator confirm which DSL lines are bonded into a group and their aggregate data-rate bounds on a Paradyne DSL bonding platform. It is deployed on Paradyne Networks DSL bonding equipment. Engineers can download the PDN-DSL-ATM-BOND-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PDN-DSL-ATM-BOND-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Paradyne Networks DSL bonding equipment

Monitoring Examples

An administrator checks pdnDslAtmBondGroupAtucMaxNetDataRate and pdnDslAtmBondMappingTable to confirm which DSL lines are bonded and their aggregate rate on a Paradyne DSL bonding platform.

What Can Be Monitored

DSL bonding-group membership and aggregate data-rate configuration

Imported Objects

From IF-MIB

InterfaceIndex

From PDN-HEADER-MIB

pdn-interfaces

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
RowStatus
TEXTUAL-CONVENTION
TestAndIncr
TruthValue

How to Use in IPNetwork Monitor

Example using pdnDslAtmBondPerfFailCount OID:

Select a Paradyne Networks DSL bonding equipment (multi-pair ATM bonding) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type pdnDslAtmBondPerfFailCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports a count of the number of times the group was declared `unavailable` since last restart. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
pdnDslAtmBondMIB	1.3.6.1.4.1.1795.2.24.2.6.33			This MIB module defines a collection of objects for managing the bonding of multiple digital subscriber lines (DSL) to transport ATM streams. At the time this modules was defined, neither the IETF nor the ATM Forum had any indication of plans to produce MIB modules to support the bonding of multiple digital subscriber lines to transport ATM streams. As a result, these objects may be a `temporary' solution should a standards body produces a module to support this type of bonding. The following documents are informational references with respect to this MIB module: [G.998.1] ITU-T G.998.1, `ATM-based Multi-Pair Bonding', January 2005. [RFC 2494] Fowler, D., `Definitions of Managed Objects for the DS0 and DS0 Bundle Interface type', January 1999. [T1E1.4] ANSI T1E1.4/2003-334R6, American National Standards Institute (ANSI), `Draft proposed American National Standard, ATM-based multi-pair bonding', October 2004. [TR-090] Abbi, R., DSL Forum Technical Report Technical Report TR-090, `Protocol Independent Object Model for Managing Next Generation ADSL Technologies', December 2004. ================================================================= == == == Copyright (C) 2005 Paradyne Networks, Inc. == == == =================================================================
pdnDslAtmBondNotifications	1.3.6.1.4.1.1795.2.24.2.6.33.0
NTF pdnDslAtmBondAtucRateChange	1.3.6.1.4.1.1795.2.24.2.6.33.0.1			The downstream transmit rate has changed.
NTF pdnDslAtmBondAturRateChange	1.3.6.1.4.1.1795.2.24.2.6.33.0.2			The upstream transmit rate has changed.
NTF pdnDslAtmBondGroupStatusChange	1.3.6.1.4.1.1795.2.24.2.6.33.0.3			The operational status of the group has changed.
pdnDslAtmBondObjects	1.3.6.1.4.1.1795.2.24.2.6.33.1
TES pdnDslAtmBondNextGroupIndex	1.3.6.1.4.1.1795.2.24.2.6.33.1.1	TestAndIncr	read-write	This object is used to establish the next unused group index (pdnDslAtmBondGroupIndex). This object is used to assist the manager in selecting a value for pdnDslAtmBondGroupIndex. Because this object is of syntax TestAndIncr (see the SNMPv2-TC document, RFC 2579) it can also be used to avoid race conditions with multiple managers trying to create rows in the table. If the result of the SET for pdnDslAtmBondNextGroupIndex is not success, this means the value has been changed from index (i.e. another manager used the value), so a new value is required. The algorithm is: done = false while done == false index = GET (pdnDslAtmBondNextGroupIndex.0) SET (pdnDslAtmBondNextGroupIndex.0=index) if (set failed) done = false else SET(pdnDslAtmBondGroupRowStatus.index=createAndGo) if (set failed) done = false else done = true other error handling This description was modeled from RFC2494, DS0BUNDLE-MIB.
U32 pdnDslAtmBondNbrOfGroups	1.3.6.1.4.1.1795.2.24.2.6.33.1.2	Unsigned32	read-only	The number of bonding groups configured on this system.
pdnDslAtmBondGroupTable	1.3.6.1.4.1.1795.2.24.2.6.33.1.3		not-accessible	The DSL ATM Bond Group Table. Contains configuration and operational information relative to a particular bonding group.
pdnDslAtmBondGroupEntry	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1		not-accessible	An entry in the DSL ATM Bond Group Table. Each entry represents a particular bonding group.
PDN pdnDslAtmBondGroupIndex	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.1	PdnDslAtmBondGroupIndexTC	not-accessible	A unique identifier for a bonding group. This is not the same value as an ifIndex for the group. The pdnDslAtmBondGroupIfIndex object contains the bonding group's ifIndex.
ROW pdnDslAtmBondGroupRowStatus	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.2	RowStatus	read-create	This object allows create, change, and delete operations on the table. The delete operation can only occur when the pdnDslAtmBondGroupNbrRefs is 0 meaning that there are no DSL interfaces and bearers that are bonded to this group.
U32 pdnDslAtmBondGroupNbrRefs	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.3	Unsigned32	read-only	The number of DSL interface / bearer combinations that are members of this group. This is the number of entries in the pdnDslAtmBondMappingTable that have their pdnDslAtmBondMappingGroupIndex assigned to this value of pdnDslAtmBondGroupIndex.
NUM pdnDslAtmBondGroupIfIndex	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.4	InterfaceIndex	read-only	Identifies the interface number assigned to this bonding group and is used to identify corresponding rows in the interfaces MIB.
PDN pdnDslAtmBondGroupID	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.5	PdnDslAtmBondGroupIdentityTC	read-create	An identifier to uniquely identify the bonding group. This ID one of the fields of the Autonomous Status Message and may be useful in some debugging situations.
STR pdnDslAtmBondGroupAlarmConfProfileName	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.6	SnmpAdminString	read-create	Identifies the Alarm Profile this group is associated with which is an entry in the pdnDslAtmBondAlarmConfProfileTable. If this object is not a zero-length string, it should default to the default profile whose name is `DEFVAL'.
PDN pdnDslAtmBondGroupAtucMaxNetDataRate	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.7	PdnDslAtmBondGroupDataRateTC	read-create	The maximum net data rate this bonding group is allowed to achieve in the downstream direction.
PDN pdnDslAtmBondGroupAturMaxNetDataRate	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.8	PdnDslAtmBondGroupDataRateTC	read-create	The maximum net data rate this bonding group is allowed to achieve in the upstream direction.
PDN pdnDslAtmBondGroupAtucMinNetDataRate	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.9	PdnDslAtmBondGroupDataRateTC	read-create	The minimum net data rate this bonding group is allowed to achieve in the downstream direction.
PDN pdnDslAtmBondGroupAturMinNetDataRate	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.10	PdnDslAtmBondGroupDataRateTC	read-create	The minimum net data rate this bonding group is allowed to achieve in the upstream direction.
PDN pdnDslAtmBondGroupAtucDiffDelay	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.11	PdnDslAtmBondGroupDiffDelayTolTC	read-create	The maximum differential delay tolerance among member links in this bonding group in the downstream direction.
PDN pdnDslAtmBondGroupAturDiffDelay	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.12	PdnDslAtmBondGroupDiffDelayTolTC	read-create	The maximum differential delay tolerance among member links in this bonding group in the upstream direction.
T/F pdnDslAtmBondGroupStatusNotifyEnabled	1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.13	TruthValue	read-create	Specifies whether or not the pdnDslAtmBondGroupStatusChange notification will be generated. When set to true(1), the notification will be generated when the pdnDslAtmBondPerfGroupStatus changes. When set to false(2), the notification will not be generated with the pdnDslAtmBondPerfGroupStatus changes.
pdnDslAtmBondMappingTable	1.3.6.1.4.1.1795.2.24.2.6.33.1.4		not-accessible	The DSL ATM Bond Mapping Table. This table is used to map a DSL port and a bearer number to a bonding group.
pdnDslAtmBondMappingEntry	1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1		not-accessible	An entry in the DSL ATM Bond Mapping Table. Each entry represents a DSL interface and a a bearer number.
NUM pdnDslAtmBondDslIfIndex	1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.1	InterfaceIndex	not-accessible	Identifies the DSL interface of a link that is to be bonded to the group.
PDN pdnDslAtmBondBearerNbr	1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.2	PdnDslAtmBondGroupBearerNumberTC	not-accessible	Identifies the bearer number of a link for the DSL line to be bonded to the group.
ROW pdnDslAtmBondMappingRowStatus	1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.3	RowStatus	read-create	This object allows create, change, and delete operations on the table.
PDN pdnDslAtmBondMappingGroupIndex	1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.4	PdnDslAtmBondGroupIndexTC	read-create	The pdnDslAtmBondGroupIndex which identifies the group to which the DSL line and bearer number, which form a link, are to be bound to.
pdnDslAtmBondGroupIndexMappingTable	1.3.6.1.4.1.1795.2.24.2.6.33.1.5		not-accessible	The DSL ATM Bond Group Index Mapping Table. This table identifies the mapping from the bonding group's ifIndex to the bonding group's index.
pdnDslAtmBondGroupIndexMappingEntry	1.3.6.1.4.1.1795.2.24.2.6.33.1.5.1		not-accessible	An entry in the DSL ATM Bond Group Index Mapping Table. Each entry represents an ifIndex for a bonding group.
PDN pdnDslAtmBondGroupIndexMappingIndex	1.3.6.1.4.1.1795.2.24.2.6.33.1.5.1.1	PdnDslAtmBondGroupIndexTC	read-only	The pdnDslAtmBondGroupIndex this group ifIndex entry maps to.
pdnDslAtmBondGroupInvMappingTable	1.3.6.1.4.1.1795.2.24.2.6.33.1.6		not-accessible	The DSL ATM Bond Group Inverse Mapping Table. This table identifies the mapping from a bonding group's index and a DSL interface to a bearer. This object provides a a mechanism to list bonding groups from a group's index.
pdnDslAtmBondGroupInvMappingEntry	1.3.6.1.4.1.1795.2.24.2.6.33.1.6.1		not-accessible	An entry in the DSL ATM Bond Inverse Mapping Table. Each entry represents a particular bonding group and a particular DSL interface.
PDN pdnDslAtmBondInvMappingBearerNbr	1.3.6.1.4.1.1795.2.24.2.6.33.1.6.1.1	PdnDslAtmBondGroupBearerNumberTC	read-only	The bearer on a particular DSL interface that is a member of the bonding group.
pdnDslAtmBondPerfTable	1.3.6.1.4.1.1795.2.24.2.6.33.1.7		not-accessible	The DSL ATM Bond Current Table. This table contains the status and performance information for bonding groups.
pdnDslAtmBondPerfEntry	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1		not-accessible	An entry in the DSL ATM Bond Performance Table. Each entry represents a particular bonding group.
PDN pdnDslAtmBondPerfCurrAtucNetDataRate	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.1	PdnDslAtmBondGroupDataRateTC	read-only	The current net data rate the bonding group has achieved for the downstream direction.
PDN pdnDslAtmBondPerfCurrAturNetDataRate	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.2	PdnDslAtmBondGroupDataRateTC	read-only	The current net data rate the bonding group has achieved for the upstream direction.
PDN pdnDslAtmBondPerfPrevAtucNetDataRate	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.3	PdnDslAtmBondGroupDataRateTC	read-only	The previous net data rate the bonding group had achieved for the downstream direction. This value is set at initialization to prevent a notification from being sent.
PDN pdnDslAtmBondPerfPrevAturNetDataRate	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.4	PdnDslAtmBondGroupDataRateTC	read-only	The previous net data rate the bonding group had achieved for the upstream direction. This value is set at initialization to prevent a notification from being sent.
PDN pdnDslAtmBondPerfGroupStatus	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.5	PdnDslAtmBondGroupStatusTC	read-only	The status of the bonding group.
PDN pdnDslAtmBondPerfFailReason	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.6	PdnDslAtmBondGroupFailReasonTC	read-only	The reason the operational status of the bonding group is not `operational'.
C32 pdnDslAtmBondPerfFailCountEx	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.7	Counter32	read-only	A count of the number of times the group was declared `unavailable` since last restart.
C32 pdnDslAtmBondPerfRunTime	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.8	Counter32	read-only	The total accumulated time the bonding group was in the `normal' operational status since last restart.
C32 pdnDslAtmBondPerfUAS	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.9	Counter32	read-only	The total accumulated time the bonding group was unavailable since last restart.
C32 pdnDslAtmBondPerfAtucRxCellLoss	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.10	Counter32	read-only	The total number of cells that are lost at the aggregation output in the upstream direction from the bonding group since last restart.
C32 pdnDslAtmBondPerfAturRxCellLoss	1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.11	Counter32	read-only	The total number of cells that are lost at the aggregation output in the downstream direction from a bonding group since last restart.
pdnDslAtmBond15MinIntervalTable	1.3.6.1.4.1.1795.2.24.2.6.33.1.8		not-accessible	The DSL ATM Bond 15-Minute Interval Table. This table contains the status and performance information for bonding groups collected in 15-minute intervals.
pdnDslAtmBond15MinIntervalEntry	1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1		not-accessible	An entry in the DSL ATM Bond 15-Minute Interval Table. Each entry represents a particular bonding group and a particular 15-minute interval.
U32 pdnDslAtmBond15MinIntervalNumber	1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.1	Unsigned32	not-accessible	Performance Data Interval number. Interval 1 is the most recent previous 15-minute interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
DAT pdnDslAtmBond15MinIntervalStartDateAndTime	1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.2	DateAndTime	read-only	Provides a date-time indication of when the interval started.
C32 pdnDslAtmBond15MinIntervalFailCount	1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.3	Counter32	read-only	A count of the number of times the group was declared `unavailable` during the interval.
C32 pdnDslAtmBond15MinIntervalRunTime	1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.4	Counter32	read-only	The accumulated time the bonding group was in the `normal' operational status during the interval.
C32 pdnDslAtmBond15MinIntervalUAS	1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.5	Counter32	read-only	The accumulated time the bonding group was unavailable during the interval,
C32 pdnDslAtmBond15MinIntervalAtucRxCellLoss	1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.6	Counter32	read-only	The number of cells that are lost at the aggregation output in the upstream direction from the bonding group during the interval.
C32 pdnDslAtmBond15MinIntervalAturRxCellLoss	1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.7	Counter32	read-only	The number of cells that are lost at the aggregation output in the downstream direction from the bonding group during the interval.
pdnDslAtmBond1DayIntervalTable	1.3.6.1.4.1.1795.2.24.2.6.33.1.9		not-accessible	The DSL ATM Bond 1-Day Interval Table. This table contains the status and performance information for bonding groups collected in 1-Day intervals.
pdnDslAtmBond1DayIntervalEntry	1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1		not-accessible	An entry in the DSL ATM Bond 1-Day Interval Table. Each entry represents a particular bonding group and a particular 1-day interval.
U32 pdnDslAtmBond1DayIntervalNumber	1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.1	Unsigned32	not-accessible	Performance Data Interval number. Interval 1 is the most recent previous 1-day interval; interval 30 is 30 days ago. Intervals 2..30 are optional.
DAT pdnDslAtmBond1DayIntervalStartDateAndTime	1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.2	DateAndTime	read-only	Provides a date-time indication of when the interval started.
C32 pdnDslAtmBond1DayIntervalFailCount	1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.3	Counter32	read-only	A count of the number of times the group was declared `unavailable` during the interval.
C32 pdnDslAtmBond1DayIntervalRunTime	1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.4	Counter32	read-only	The accumulated time the bonding group was in the `normal' operational status during the interval.
C32 pdnDslAtmBond1DayIntervalUAS	1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.5	Counter32	read-only	The accumulated time the bonding group was unavailable during the interval,
C32 pdnDslAtmBond1DayIntervalAtucRxCellLoss	1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.6	Counter32	read-only	The number of cells that are lost at the aggregation output in the upstream direction from a bonding group during the interval.
C32 pdnDslAtmBond1DayIntervalAturRxCellLoss	1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.7	Counter32	read-only	The number of cells that are lost at the aggregation output in the downstream direction from the bonding group during the interval.
pdnDslAtmBondLinkTable	1.3.6.1.4.1.1795.2.24.2.6.33.1.10		not-accessible	The DSL ATM Bond Link Table. This table contains the current status information for a link in a bonding group.
pdnDslAtmBondLinkEntry	1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1		not-accessible	An entry in the DSL ATM Bond Link Table. each entry represents a DSL interface on a particular bonding group.
PDN pdnDslAtmBondLinkAtucRxLinkStatus	1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.1	PdnDslAtmBondLinkStatusAsmTC	read-only	The status of the Rx link in a bonded group in the upstream direction.
PDN pdnDslAtmBondLinkAturRxLinkStatus	1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.2	PdnDslAtmBondLinkStatusAsmTC	read-only	The status of the Rx link in a bonded group in the downstream direction.
PDN pdnDslAtmBondLinkAtucTxLinkStatus	1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.3	PdnDslAtmBondLinkStatusAsmTC	read-only	The status of the Tx link in a bonded group in the downstream direction.
PDN pdnDslAtmBondLinkAturTxLinkStatus	1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.4	PdnDslAtmBondLinkStatusAsmTC	read-only	The status of the Rx link in a bonded group in the upstream direction.
PDN pdnDslAtmBondLinkAtucAsmRxStatus	1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.5	PdnDslAtmBondAsmRxStatusTC	read-only	The status of ASMs received for the link in a bonded in the upstream direction.
PDN pdnDslAtmBondLinkAturAsmRxStatus	1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.6	PdnDslAtmBondAsmRxStatusTC	read-only	The status of ASMs received for the link in a bonded in the downstream direction.
pdnDslAtmBondAlarmConfProfileTable	1.3.6.1.4.1.1795.2.24.2.6.33.1.11		not-accessible	The DSL ATM Bond Alarm Configuration Profile Table. This table contains the alarm configuration profiles for DSL ATM Bonding.
pdnDslAtmBondAlarmConfProfileEntry	1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1		not-accessible	An entry in the DSL ATM Bond Alarm Configuration Profile Table. Each entry represents a single alarm configuration profile. Profiles may be created/deleted using the RowStatus mechanism not including the default profile. A default profile with an index of `DEFVAL' will always exist and its parameters will be set to implementation-specific values.
STR pdnDslAtmBondAlarmConfProfileName	1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.1	SnmpAdminString	not-accessible	This object is the index for the table and identifies a unique row in the table. A default profile with an index of `DEFVAL' will always exist and its parameters will be set to implementation-specific values.
ROW pdnDslAtmBondAlarmConfRowStatus	1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.2	RowStatus	read-create	This object allows profiles to be created to deleted. The delete operation can only occur when the pdnDslAtmBondAlarmConfNbrRefs is 0 meaning that there are no entries in the pdnDslAtmBondGroupTable that reference this group.
U32 pdnDslAtmBondAlarmConfNbrRefs	1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.3	Unsigned32	read-only	The number of entries in the pdnDslAtmBondGroupTable that reference this profile.
I32 pdnDslAtmBondAlarmConfAtucThreshRateUp	1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.4	Integer32	read-create	Configured change in rate, in bps, causing a pdnDslAtmBondAtucRateChange notification. The notification is produced when current rate >= previous rate plus the value of this object. A value of `0' will disable the trap.
I32 pdnDslAtmBondAlarmConfAturThreshRateUp	1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.5	Integer32	read-create	Configured change in rate, in bps, causing a pdnDslAtmBondAturRateChange notification. The notification is produced when current rate >= previous rate plus the value of this object. A value of `0' will disable the trap.
I32 pdnDslAtmBondAlarmConfAtucThreshRateDown	1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.6	Integer32	read-create	Configured change in rate, in bps, causing a pdnDslAtmBondAtucRateChange notification. The notification is produced when current rate <= previous rate minus the value of this object. A value of `0' will disable the trap.
I32 pdnDslAtmBondAlarmConfAturThreshRateDown	1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.7	Integer32	read-create	Configured change in rate, in bps, causing a pdnDslAtmBondAturRateChange notification. The notification is produced when current rate <= previous rate minus the value of this object. A value of `0' will disable the trap.
pdnDslAtmBondAFNs	1.3.6.1.4.1.1795.2.24.2.6.33.2
pdnDslAtmBondConformance	1.3.6.1.4.1.1795.2.24.2.6.33.3
pdnDslAtmBondCompliances	1.3.6.1.4.1.1795.2.24.2.6.33.3.1
pdnDslAtmBondMIBCompliance	1.3.6.1.4.1.1795.2.24.2.6.33.3.1.1			The compliance statement for the entities which implement the pdnDslAtmBondMIB.
pdnDslAtmBondGroups	1.3.6.1.4.1.1795.2.24.2.6.33.3.2
pdnDslAtmBondObjGroups	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1
pdnDslAtmBondGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.1			General configuration/definition of a bonding group.
pdnDslAtmBondMaxRateGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.2			Configuration of the maximum net data rate a bonding group is allowed to achieve.
pdnDslAtmBondMinRateGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.3			Configuration of the minimum net data rate a bonding group is allowed to achieve.
pdnDslAtmBondDiffDelayGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.4			Configuration of maximum differential delay among member links in a bonding group.
pdnDslAtmBondGroupStatusNotifyEnabledGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.5			Configuration of notifications for changes to the status of a bonding group.
pdnDslAtmBondMappingGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.6			Map a DSL interface and a bearer to a bonding group.
pdnDslAtmBondIndexMappingGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.7			Map from a bonding group's ifIndex to the bonding group's index.
pdnDslAtmBondInvMappingGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.8			Map from a bonding group and a DSL interface to a bearer.
pdnDslAtmBondPerfAggDataRateGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.9			Status of the net data rate the bonding group has currently or had previously achieved.
pdnDslAtmBondPerfBondGroupStatusGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.10			Current status of the bonding group.
pdnDslAtmBondDateAndTimeGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.11			Date-time stamp of when an interval started.
pdnDslAtmBondRunTimeGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.12			The tracking of time a bonding group is `operational'.
pdnDslAtmBondRxCellLossGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.13			The tracking the total number of cells that are lost at the aggregation output from a bonding group.
pdnDslAtmBondPerfFailReasonGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.14			The reason the operational status of the bonding group is not `operational'.
pdnDslAtmBondFailCountGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.15			The number of times a bonding group was declared `unavailable'.
pdnDslAtmBondUASGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.16			The time a bonding group was unavailable.
pdnDslAtmBondTrafficCapGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.17			Current status of the link in a bonded group with respect to carrying bonded traffic.
pdnDslATmBondAsmRxStatusGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.18			Status of the reception of ASMs for a link in a bonded group.
pdnDslAtmBondAlarmConfProfileGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.19			Provides the ability to create or delete alarm profiles.
pdnDslAtmBondAlarmConfAtucThreshRateGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.20			Provides the ability to configure thresholds for rate changes in the downstream direction.
pdnDslAtmBondAlarmConfAturThreshRateGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.21			Provides the ability to configure thresholds for rate changes in the upstream direction.
pdnDslAtmBondAfnGroups	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.2
pdnDslAtmBondNtfyGroups	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.3
pdnDslAtmBondNotificationsGroup	1.3.6.1.4.1.1795.2.24.2.6.33.3.2.3.1			The collection of notifications for the MIB module.

RFC description

Paradyne MIB for bonding multiple DSL lines for ATM stream transport, managing DSL aggregation.

Start monitoring Paradyne Networks DSL bonding equipment (multi-pair ATM bonding) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PDN-DSL-ATM-BOND-MIB