All MIBs › HOTWIRE-MSDSL-INTERFACE-MIB
Category: DSL and Broadband, Domain: DSL, Domain: DSL/xPON, Domain: WAN
Description: Paradyne HotWire Multi-rate Symmetric DSL (MSDSL) interface MIB for managing MSDSL line configuration and statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HOTWIRE-MSDSL-INTERFACE-MIB?
HOTWIRE-MSDSL-INTERFACE-MIB is a Paradyne (HotWire product line) MIB for managing Multi-rate Symmetric DSL (MSDSL) line interfaces, part of Paradyne's broader private enterprise MIB tree for DSL access equipment. Based on the available object prefixes, it sits under the Paradyne private management tree alongside common interface- and management-related branches, indicating it defines MSDSL-specific line configuration and interface objects. Its expected monitoring value, consistent with other DSL interface MIBs, is tracking physical line/interface status such as line rate, signal quality, and interface up/down state, though the specific object names were not present in the available sample. It builds on the standard IF-MIB (ifTable) interface model as is typical for physical-layer line MIBs. It would be deployed on Paradyne HotWire DSL access equipment such as DSLAMs or CPE modems providing symmetric DSL service. Engineers can download the HOTWIRE-MSDSL-INTERFACE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HOTWIRE-MSDSL-INTERFACE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Paradyne HotWire DSL access equipment (DSLAM/CPE)
Monitoring Examples
The available sample only includes high-level tree/branch names (--thenewpdn-mgmt, --paradyne, --pdn-common, --pdn-interfaces, --pdnmsdsl) rather than actual leaf objects or tables, so a concrete monitoring scenario with real object names cannot be honestly constructed from this data. Typically an MSDSL interface MIB would expose per-line rate and status objects analogous to a msdslLineTable, but no such object names appear in the provided sample. An admin would need the full MIB source to identify actual pollable counters for line rate, errors, or margin.
This MIB depends on
Related MIBs
Imported Objects
From PDN-HEADER-MIB
| pdnmsdsl | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| TimeTicks | |
| enterprises |
From RFC1213-MIB
| DisplayString | |
| ifIndex |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| msdslConfiguration | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15 | |||
| msdslCurrent | 1.3.6.1.4.1.1795.2.24.2.6.15.1.1 | |||
| msdslCurrentEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1 | not-accessible | An entry in the MSDSL Current table. | |
| GAU msdslCurrentESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.2 | Gauge | read-only | The number of Errored Seconds, encountered by a MSDSL interface in the current 15 minute inter- val. |
| GAU msdslCurrentFEBEs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.4 | Gauge | read-only | The number of Far End Block Errors (FEBE) en- countered by a MSDSL interface in the current 15 minute interval. |
| INT msdslCurrentIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| msdslCurrentPerf | 1.3.6.1.4.1.1795.2.24.2.6.15.1.9 | |||
| msdslCurrentPerfEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1 | not-accessible | An entry in the MSDSL Current performance table. | |
| INT msdslCurrentPerfIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| GAU msdslCurrentPerfMargin | 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.2 | Gauge | read-only | The average Margin value for the current 15 minute interval. |
| GAU msdslCurrentPerfRxGain | 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.4 | Gauge | read-only | The average value of the Receiver gain the current 15 minute interval. |
| msdslCurrentPerfTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9 | not-accessible | The MSDSL Current Peformance Statistics table. | |
| GAU msdslCurrentPerfTxPwr | 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.3 | Gauge | read-only | The average value of the Transmit power in the current 15 minute interval. |
| GAU msdslCurrentSESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.3 | Gauge | read-only | The number of Severely Errored Seconds encoun- tered by a msdsl interface in the current 15 minute interval. |
| msdslCurrentTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1 | not-accessible | The MSDSL Current 15 minute interval table. | |
| msdslDevice | 1.3.6.1.4.1.1795.2.24.2.6.15.1 | |||
| msdsldsx1WorstInterval | 1.3.6.1.4.1.1795.2.24.2.6.15.1.13 | |||
| INT msdsldsx1WorstIntervalBESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.5 | INTEGER | read-only | The number of Bursty Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| INT msdsldsx1WorstIntervalCSSs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.6 | INTEGER | read-only | The number of Controlled Slip Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| msdsldsx1WorstIntervalEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1 | not-accessible | An entry in the msdsl DSX1 Worst Interval table. | |
| INT msdsldsx1WorstIntervalESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.2 | INTEGER | read-only | The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| INT msdsldsx1WorstIntervalIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| INT msdsldsx1WorstIntervalLOFC | 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.7 | INTEGER | read-only | The number of Loss of Frame Counts encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals. |
| INT msdsldsx1WorstIntervalSESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.4 | INTEGER | read-only | The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals. |
| msdsldsx1WorstIntervalTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13 | not-accessible | The MSDSL DSX1 Worst Interval table. | |
| INT msdsldsx1WorstIntervalUASs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.3 | INTEGER | read-only | The number of Unavailable Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| INT msdslErrEventsCounter | 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.5 | INTEGER | read-only | An error event is a CRC error, maximum count is 65,535. If the count reaches 65,535 it will remain at that value until reset. Reset is when the near end data is cleared. |
| NTF msdslErrorRateHigh | 1.3.6.1.4.1.1795.2.24.2.6.15.1.0.4 | This trap signifies that the error rate estimates is above a customer set threshold value. This is a trap of 'minor' class. | ||
| NTF msdslErrorRateNormal | 1.3.6.1.4.1.1795.2.24.2.6.15.1.0.104 | This trap signifies that the error rate estimates gone below a customer set threshold value. This is a trap of 'minor' class. This trap compliments the xdslErrorRateHigh trap. | ||
| INT msdslErrTimeElapsed | 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.6 | INTEGER | read-only | The number of seconds that have elapsed since the beginning of the current error-measurment period. |
| INT msdslErrValidIntervals | 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.7 | INTEGER | read-only | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals since the interface has been online. |
| msdslFarEndCurrent | 1.3.6.1.4.1.1795.2.24.2.6.15.1.5 | |||
| msdslFarEndCurrentEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1 | not-accessible | An entry in the MSDSL Current table. | |
| GAU msdslFarEndCurrentESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.2 | Gauge | read-only | The number of Errored Seconds, encountered by a MSDSL interface in the current 15 minute inter- val. |
| GAU msdslFarEndCurrentFEBEs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.4 | Gauge | read-only | The number of Far End Block Errors (FEBE) en- countered by a MSDSL interface in the current 15 minute interval. |
| INT msdslFarEndCurrentIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| msdslFarEndCurrentPerf | 1.3.6.1.4.1.1795.2.24.2.6.15.1.11 | |||
| msdslFarEndCurrentPerfEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1 | not-accessible | An entry in the MSDSL Current performance table. | |
| INT msdslFarEndCurrentPerfIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| GAU msdslFarEndCurrentPerfMargin | 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.2 | Gauge | read-only | The average Margin value for the current 15 minute interval. |
| GAU msdslFarEndCurrentPerfRxGain | 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.4 | Gauge | read-only | The average value of the Receiver gain the current 15 minute interval. |
| msdslFarEndCurrentPerfTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11 | not-accessible | The MSDSL Current Peformance Statistics table. | |
| GAU msdslFarEndCurrentPerfTxPwr | 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.3 | Gauge | read-only | The average value of the Transmit power in the current 15 minute interval. |
| GAU msdslFarEndCurrentSESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.3 | Gauge | read-only | The number of Severely Errored Seconds encoun- tered by a msdsl interface in the current 15 minute interval. |
| msdslFarEndCurrentTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5 | not-accessible | The MSDSL Current table. | |
| msdslFarEndInterval | 1.3.6.1.4.1.1795.2.24.2.6.15.1.6 | |||
| msdslFarEndIntervalEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1 | not-accessible | An entry in the msdsl Interval table. | |
| GAU msdslFarEndIntervalESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.3 | Gauge | read-only | The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| GAU msdslFarEndIntervalFEBEs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.5 | Gauge | read-only | The number of Far End Block Errors encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals. |
| INT msdslFarEndIntervalIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| INT msdslFarEndIntervalNumber | 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.2 | INTEGER | read-only | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid). |
| msdslFarEndIntervalPerf | 1.3.6.1.4.1.1795.2.24.2.6.15.1.12 | |||
| msdslFarEndIntervalPerfEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1 | not-accessible | An entry in the msdsl Interval performance table. | |
| INT msdslFarEndIntervalPerfIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| GAU msdslFarEndIntervalPerfMargin | 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.3 | Gauge | read-only | The average Margin value for the current 15 minute interval. |
| INT msdslFarEndIntervalPerfNumber | 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.2 | INTEGER | read-only | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid). |
| GAU msdslFarEndIntervalPerfRxGain | 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.5 | Gauge | read-only | The average value of the Receiver gain the current 15 minute interval. |
| msdslFarEndIntervalPerfTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12 | not-accessible | The MSDSL Interval table. | |
| GAU msdslFarEndIntervalPerfTxPwr | 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.4 | Gauge | read-only | The average value of the Transmit power in the current 15 minute interval. |
| GAU msdslFarEndIntervalSESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.4 | Gauge | read-only | The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals. |
| msdslFarEndIntervalTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6 | not-accessible | The MSDSL Far End Interval table. | |
| msdslFarEndTotal | 1.3.6.1.4.1.1795.2.24.2.6.15.1.8 | |||
| msdslFarEndTotalEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1 | not-accessible | An entry in the DSL Total table. | |
| GAU msdslFarEndTotalESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.2 | Gauge | read-only | The number of Errored Seconds encountered by a DSL interface in the previous 24 hour interval |
| GAU msdslFarEndTotalFEBEs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.4 | Gauge | read-only | The number of Far End Block Errors ( FEBE) encountered by a DSL interface in the previous 24 hour interval. |
| INT msdslFarEndTotalIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.1 | INTEGER | read-only | The index value which uniquely identifies the DSL interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a msdslLineIfIndex object instance. |
| GAU msdslFarEndTotalSESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.3 | Gauge | read-only | The number of Severely Errored Seconds encoun- tered by a DSL interface in the previous 24 hour interval. |
| msdslFarEndTotalTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8 | not-accessible | The DSL Total table. 24 hour interval. | |
| msdslFarEndWorstInterval | 1.3.6.1.4.1.1795.2.24.2.6.15.1.7 | |||
| msdslFarEndWorstIntervalEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1 | not-accessible | An entry in the msdsl Worst Interval table. | |
| INT msdslFarEndWorstIntervalESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.2 | INTEGER | read-only | The number of Far End Block Errors encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals. |
| INT msdslFarEndWorstIntervalFEBEs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.4 | INTEGER | read-only | The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface. |
| INT msdslFarEndWorstIntervalIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| INT msdslFarEndWorstIntervalSESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.3 | INTEGER | read-only | The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface. |
| msdslFarEndWorstIntervalTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7 | not-accessible | The MSDSL Far End Interval table. | |
| msdslFracEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1 | not-accessible | An entry in the Paradyne MSDSL Cross Connect Table. | |
| INT msdslFracPortIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.3 | INTEGER | read-write | An index value that uniquely identifies the interface to which this entry is mapped. The interface identified by a particular value of this index is the same interface as identified by the same value of an ifIndex object instance If no interface is currently using the Time Slot identified by msdslFracPortTS, then this value should be zero. This is used to unassign the Time Slot. If a single interface occupies more than one time slot, then its ifIndex value is found in multiple time slots (i.e., there are multiple entries in table with the same msdslFracPortIfIndex value). |
| INT msdslFracPortIfTS | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.4 | INTEGER | read-write | The Time Slot associated with the interface identified by msdslFracPortIfIndex for this entry. If the allocation method is ds1ByPass then this object is not required since the whole port specified by msdslFracPortIndex will be assigned to the corresponding msdslFracPortIfIndex. If the allocation method is ds1CrossConn then this object is also not required since the whole port specified by msdslFracPortIndex will be assigned to the port specified by msdslFracPortIfIndex. If the allocation method is ds0CrossConn, then this object specifies the Time Slot associated with the interface identified by msdslFracPortIfIndex for this entry. |
| INT msdslFracPortIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.1 | INTEGER | read-only | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| INT msdslFracPortTS | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.2 | INTEGER | read-write | The Time Slot number associated with the interface identified by msdslFracPortIndex for this entry. If the allocation method is ds1ByPass then this object is not required since the whole port specified by msdslFracPortIndex will be assigned to the corresponding msdslFracPortIfIndex. If the allocation method is ds1CrossConn then this object is also not required since the whole port specified by msdslFracPortIndex will be assigned to the port specified by msdslFracPortIfIndex. If the allocation method is ds0CrossConn, then this object specifies the Time Slot associated with the interface identified by msdslFracPortIndex for this entry. |
| INT msdslFracPortVoiceData | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.5 | INTEGER | read-write | The Current mode for this DS0. |
| msdslFracTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28 | not-accessible | The Paradyne MSDSL Cross Connect Table. | |
| msdslG703WorstInterval | 1.3.6.1.4.1.1795.2.24.2.6.15.1.14 | |||
| INT msdslG703WorstIntervalBESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.5 | INTEGER | read-only | The number of Bursty Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| INT msdslG703WorstIntervalCSSs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.6 | INTEGER | read-only | The number of Controlled Slip Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| msdslG703WorstIntervalEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1 | not-accessible | An entry in the msdsl G.703 Worst Interval table. | |
| INT msdslG703WorstIntervalESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.2 | INTEGER | read-only | The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| INT msdslG703WorstIntervalIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| INT msdslG703WorstIntervalLOFC | 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.7 | INTEGER | read-only | The number of Loss of Frame Counts encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals. |
| INT msdslG703WorstIntervalSESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.4 | INTEGER | read-only | The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals. |
| msdslG703WorstIntervalTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14 | not-accessible | The MSDSL G.703 Worst Interval table. | |
| INT msdslG703WorstIntervalUASs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.3 | INTEGER | read-only | The number of Unavailable Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| msdslInterval | 1.3.6.1.4.1.1795.2.24.2.6.15.1.2 | |||
| msdslIntervalEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1 | not-accessible | An entry in the MSDSL Interval table. | |
| GAU msdslIntervalESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.3 | Gauge | read-only | The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals. |
| GAU msdslIntervalFEBEs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.5 | Gauge | read-only | The number of Far End Block Errors encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals. |
| INT msdslIntervalIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| INT msdslIntervalNumber | 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.2 | INTEGER | read-only | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid). |
| msdslIntervalPerf | 1.3.6.1.4.1.1795.2.24.2.6.15.1.10 | |||
| msdslIntervalPerfEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1 | not-accessible | An entry in the msdsl Interval performance table. | |
| INT msdslIntervalPerfIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| GAU msdslIntervalPerfMargin | 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.3 | Gauge | read-only | The average Margin for a DSL interface in one of the previous 96, individual 15 minute, intervals. |
| INT msdslIntervalPerfNumber | 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.2 | INTEGER | read-only | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid). |
| GAU msdslIntervalPerfRxGain | 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.5 | Gauge | read-only | The average RxGain on a DSL interface in one of the previous 96, individual 15 minute, intervals. |
| msdslIntervalPerfTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10 | not-accessible | The MSDSL Interval table. | |
| GAU msdslIntervalPerfTxPwr | 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.4 | Gauge | read-only | The average Transmit Power on a DSL interface in one of the previous 96, individual 15 minute, intervals. |
| GAU msdslIntervalSESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.4 | Gauge | read-only | The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals. |
| msdslIntervalTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2 | not-accessible | An MSDSL Interval table. | |
| NTF msdslMarginLow | 1.3.6.1.4.1.1795.2.24.2.6.15.1.0.3 | This trap signifies that the margin estimate is below a customer set threshold value. This is a trap of 'minor' class. | ||
| NTF msdslMarginNormal | 1.3.6.1.4.1.1795.2.24.2.6.15.1.0.103 | This trap signifies that the margin estimate has gone above a customer set threshold value. this is a trap of 'minor' class. this trap compliments the xdslMarginLow trap | ||
| NTF msdslNTUTypeMismatch | 1.3.6.1.4.1.1795.2.24.2.6.15.1.0.7 | The LTU configured does NOT match with the NTU connected to the DSL port indicated by the ifIndex. | ||
| GAU msdslPerfPayloadRate | 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.5 | Gauge | read-only | An estimate of the interface's current bandwidth in bits per second. Current range is: 64k to 2048k. |
| INT msdslPortConfigAllocMethod | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1.2 | INTEGER | read-write | The Current allocation method for this device. Where: ds1ByPass: In this mode the entire WAN interface is connected directly to the DSL interface. This connection provides minimal delay. Changing to this allocation method will automatically do the following assignments: WAN port 1 >>> DSL Port 1 WAN port 2 >>> DSL Port 2 WAN port 3 >>> DSL Port 3 WAN port 4 >>> DSL Port 4 WAN port 5 >>> DSL Port 5 WAN port 6 >>> DSL Port 6 WAN port 7 >>> DSL Port 7 WAN port 8 >>> DSL Port 8 ds1CrossConn: In this mode the individual WAN ports may be connected to individual DSL ports through the cross connect circuitry. This connection must use the System Clock for the timing source. Changing to this allocation method will unassign all the time slots for this interface and any time slots to the connected interface. For example: WAN port 1 >>> DSL Port 8 WAN port 2 >>> DSL Port 7 WAN port 3 >>> DSL Port 6 WAN port 4 >>> DSL Port 5 WAN port 5 >>> DSL Port 1 WAN port 6 >>> DSL Port 2 WAN port 7 >>> Not Assigned WAN port 8 >>> WAN Port 7 ds0CrossConn: This mode assigns individual time slots. Any timeslot from any WAN interface may be connected to any timeslot of any DSL interface. Changing to this allocation method will unassign all the time slots for this interface and any time slots to the connected interface. notAssigned: This indicates that this interface is not assigned. Changing to this allocation method will unassign all the time slots for this interface and any time slots to the connected interface. disabled: This is a Read Only value indicating that the interface is disabled. NOTE: Going from one mode to another mode will unassign all the time slots for that interface and the interface it was connected to. The only exception being ds1ByPass mode. When going from any mode to ds1ByPass, all the Time Slots will be assigned Network port to WAN port. These assignments, however, do not use the cross connect circuitry. |
| msdslPortConfigAllocMethodEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1 | not-accessible | An entry in the Paradyne MSDSL Cross Connect Table Allocation Method | |
| INT msdslPortConfigAllocMethodIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1.1 | INTEGER | read-only | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| msdslPortConfigAllocMethodTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29 | not-accessible | The Paradyne MSDSL Cross Connect Allocation Method Table. | |
| NTF msdslTestOver | 1.3.6.1.4.1.1795.2.24.2.6.15.1.0.106 | This trap signifies that the test has completed on one of the ports. This trap compliments the xdslTestStart trap. | ||
| INT msdslTimeElapsed | 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.6 | INTEGER | read-only | The number of seconds that have elapsed since the beginning of the current error-measurment period. |
| msdslTotal | 1.3.6.1.4.1.1795.2.24.2.6.15.1.4 | |||
| msdslTotalEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1 | not-accessible | An entry in the DSL Total table. | |
| GAU msdslTotalESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.2 | Gauge | read-only | The number of Errored Seconds encountered by a DSL interface in the previous 24 hour interval |
| GAU msdslTotalFEBEs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.4 | Gauge | read-only | The number of Far End Block Errors ( FEBE) encountered by a DSL interface in the previous 24 hour interval. |
| INT msdslTotalIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.1 | INTEGER | read-only | The index value which uniquely identifies the DSL interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a msdslLineIfIndex object instance. |
| GAU msdslTotalSESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.3 | Gauge | read-only | The number of Severely Errored Seconds encoun- tered by a DSL interface in the previous 24 hour interval. |
| msdslTotalTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4 | not-accessible | The DSL Total table. 24 hour interval. | |
| INT msdslValidIntervals | 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.7 | INTEGER | read-only | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals since the interface has been online. |
| msdslWorstInterval | 1.3.6.1.4.1.1795.2.24.2.6.15.1.3 | |||
| msdslWorstIntervalEntry | 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1 | not-accessible | An entry in the msdsl Worst Interval table. | |
| INT msdslWorstIntervalESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.2 | INTEGER | read-only | The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface. |
| INT msdslWorstIntervalFEBEs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.4 | INTEGER | read-only | The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface. |
| INT msdslWorstIntervalIfIndex | 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.1 | INTEGER | read-only | The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble. |
| INT msdslWorstIntervalSESs | 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.3 | INTEGER | read-only | The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface. |
| msdslWorstIntervalTable | 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3 | not-accessible | The MSDSL Worst Interval table. |
RFC description
Paradyne M/HDSL DSL device management with interface, cross-connect, and line code monitoring.
Start monitoring Paradyne HotWire DSL access equipment (MSDSL interface) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.