ALCATEL-IND1-TIMETRA-SERV-MIB :: svcTlsPriPortsCumulativeFactor

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsALCATEL-IND1-TIMETRA-SERV-MIBsvcTlsPriPortsCumulativeFactor

svcTlsPriPortsCumulativeFactor

Module: ALCATEL-IND1-TIMETRA-SERV-MIB

OID (symbolic): ALCATEL-IND1-TIMETRA-SERV-MIB::svcTlsPriPortsCumulativeFactor

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.66

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The value of the object svcTlsPriPortsCumulativeFactor specifies a factor for the primary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate, svcTlsMacMoveMaxRate. This rate must be exceeded during consecutive periods before the corresponding ports (SAP and/or spoke-SDP) are blocked by the MAC-move feature.

An inconsistentValue error is returned if an attempt is made to set the value of svcTlsPriPortsCumulativeFactor to a value lower than or equal to svcTlsSecPortsCumulativeFactor.

What is svcTlsPriPortsCumulativeFactor?

This OID holds a number that sets how many consecutive measurement periods must show rapid MAC address movements before the device blocks a port to prevent bridge loops or attacks. It tells you the threshold for detecting potential security threats. An operator would adjust this to tune the balance between blocking malicious port flapping and avoiding false positives in normal network changes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.66
snmpwalk -v2c -c public <target> ALCATEL-IND1-TIMETRA-SERV-MIB::svcTlsPriPortsCumulativeFactor

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.66.1
snmpget -v2c -c public <target> ALCATEL-IND1-TIMETRA-SERV-MIB::svcTlsPriPortsCumulativeFactor.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.66.1 i <value>

Start monitoring Nokia (Alcatel-Lucent) 7750 SR-series service routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-TIMETRA-SERV-MIB::svcTlsPriPortsCumulativeFactor OID value, configure state conditions and alerts, and monitor any Nokia (Alcatel-Lucent) 7750 SR-series service routers from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.4tmnxServObjsALCATEL-IND1-TIMETRA-SERV-MIB
1.3.6.1.4.1.6527.3.1.2.4.2tmnxSvcObjsALCATEL-IND1-TIMETRA-SERV-MIB
1.3.6.1.4.1.6527.3.1.2.4.2.3svcTlsInfoTableALCATEL-IND1-TIMETRA-SERV-MIB
1.3.6.1.4.1.6527.3.1.2.4.2.3.1svcTlsInfoEntryALCATEL-IND1-TIMETRA-SERV-MIB
1.3.6.1.4.1.6527.3.1.2.4.2.3.1.66svcTlsPriPortsCumulativeFactorALCATEL-IND1-TIMETRA-SERV-MIB