23 modules from Aperto
Aperto Networks (later folded into Ceragon's PacketWave WiMAX line) made fixed-wireless broadband base stations, and its MIBs split into two families: BSU-* modules for the base station itself (clock sync, VLAN, wireless air-interface radio settings, cluster membership) and matching per-subscriber-unit tables (association, inventory, traffic stats, connection status) for the SUs it serves, alongside generic DEV*-prefixed modules covering device inventory, Ethernet ports, routing, filtering, and firmware that apply across the whole BSU/SU product line. This is a wireless-ISP access technology, so most of the monitoring data is about radio link quality and per-subscriber traffic/signal rather than conventional switch or router counters. Come here if you operate an Aperto BSU/SU WiMAX deployment and need the base-station-vs-subscriber-unit split reflected in which MIB to query for a given radio link's status. All 23 of Aperto's modules are shown here, so this is the complete picture of what the vendor's MIB set covers.
| Module | Description |
|---|---|
| BSU-BRGCLUSTER-MIB | Manages bridge cluster configuration and membership for Alvarion BreezeACCESS base station units. |
| BSUCLK-MIB | Manages clock synchronization source and timing parameters for Alvarion BreezeACCESS base station units. |
| BSUMSUBNETS-MIB | Manages mobile subscriber subnet (MSUBNETS) address assignments on Alvarion BreezeACCESS base station units. |
| BSUPARAM-MIB | Manages operational parameter configuration for Alvarion BreezeACCESS base station unit (BSU) radios. |
| BSUSTATS-MIB | Collects traffic and performance statistics for Alvarion BreezeACCESS base station unit (BSU) devices. |
| BSUSTATUS-MIB | Reports operational status and alarm conditions for Alvarion BreezeACCESS base station unit (BSU) devices. |
| BSUSUBASE-MIB | Manages base subscriber unit (SU) association tables on Alvarion BreezeACCESS base station units. |
| BSUSUINV-MIB | Reports subscriber unit (SU) inventory and hardware details registered to Alvarion BreezeACCESS base stations. |
| BSUSUSTATS-MIB | Collects per-subscriber unit traffic and link performance statistics on Alvarion BreezeACCESS base stations. |
| BSUSUSTATUS-MIB | Reports per-subscriber unit connection status and signal quality on Alvarion BreezeACCESS base stations. |
| BSUVLAN-MIB | Manages VLAN assignment and tagging configuration on Alvarion BreezeACCESS base station unit interfaces. |
| BSUWIRELESSIF-MIB | Manages wireless air interface parameters and radio channel settings on Alvarion BreezeACCESS base stations. |
| DEVBASE-MIB | Defines base management objects for device inventory, status, and fundamental operation. |
| DEVCONTROL-MIB | Manages device control operations including resets, mode changes, and operational commands. |
| DEVETHERNET-MIB | Manages Ethernet interface configuration, counters, and status for network devices. |
| DEVEVENT-MIB | Manages event logging, notification, and alarm reporting for network device management. |
| DEVFILTER-MIB | Device filter MIB providing objects to configure and monitor packet filtering rules applied at device interfaces. |
| DEVHW-MIB | Manages hardware component inventory, status, and environmental monitoring for network devices. |
| DEVNM-MIB | Manages network management interface configuration and access control for network devices. |
| DEVROUTE-MIB | Manages routing table configuration and IP forwarding parameters for network devices. |
| DEVSERVER-MIB | Manages server role configuration and service parameters for network device management servers. |
| DEVSW-MIB | Manages software image versions, upgrade operations, and firmware management for network devices. |
| DEVTRAPS-MIB | Defines SNMP trap notifications for operational events on network devices. |