BSUCLK-MIB

All MIBs › BSUCLK-MIB

Organization: Aperto Networks

Last Updated: 2001-05-09

Category: Vendor: Alvarion, Wireless and WLAN

Description: Manages clock synchronization source and timing parameters for Alvarion BreezeACCESS base station units.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BSUCLK-MIB?

BSUCLK-MIB is an Aperto Networks proprietary MIB (built on ANIROOT-MIB) configuring the clock time on a BSU (Base Station Unit); subscriber units (SUs) synchronize their own clock to the BSU at boot. Its objects cover SNTP time zone, DST enable/start/end, SNTP enable, manual-time setting, and current time. As a configuration/status MIB it lets an administrator confirm the BSU's clock-sync source (SNTP vs. manual) on an Aperto Networks wireless broadband base station. It is deployed on Aperto Networks wireless broadband base-station equipment. Engineers can download the BSUCLK-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BSUCLK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Aperto Networks wireless broadband base-station equipment

Monitoring Examples

An administrator checks aniBsuClkSntpEnable and aniBsuClkCurrentTime to confirm the clock-sync source on an Aperto Networks BSU.

What Can Be Monitored

BSU clock-synchronization configuration

Imported Objects

From ANIROOT-MIB

bsu	OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
aniBsuClock	1.3.6.1.4.1.4325.3.4			This module is used to configure the clock time on the BSU. BSUs need to obtain and set their current clock time at boot up. Sus will communicate with the BSU during their own boot up and set their own clock time to that of BSU. Time at the BSU can be set either through SNTP or manually. It is recommended to use SNTP to obtain time.
STR aniBsuClkSntpTimeZone	1.3.6.1.4.1.4325.3.4.1	DisplayString	read-write	This is used to set the appropriate Time Zone offset from GMT. The format of data should be +Hour:Min or -Hour:Min. The valid Hour should be between -13 to +14 The valid Min should be 00,15,30 or 45 For example: +12:00 or +12:30 or -3:45
INT aniBsuClkSntpDstEnable	1.3.6.1.4.1.4325.3.4.2	INTEGER	read-write	This shows whether Daylight Saving is enabled or not. It gives user the option to incorporate Daylight Saving Time in the configuration.
STR aniBsuClkSntpDstStart	1.3.6.1.4.1.4325.3.4.3	DisplayString	read-write	Used to specify the start of Daylight Saving Time which should be entered in the 'mmddhh' format where m - month, d - day and h - hour. Can and must be set only if aniBsuClkSntpDstEnable is enabled.
STR aniBsuClkSntpDstEnd	1.3.6.1.4.1.4325.3.4.4	DisplayString	read-write	Used to specify the end of Daylight Saving Time which should be entered in the 'mmddhh' format where m - month, d - day and h - hour. Can and must be set only if aniBsuClkSntpDstEnable is enabled.
INT aniBsuClkSntpEnable	1.3.6.1.4.1.4325.3.4.5	INTEGER	read-write	This flag is used to enable(1) or disable(2) SNTP. It is recommended to use SNTP rather than manually setting the time to avoid errors in clock times simply due to manual entry across various BSUs.
STR aniBsuClkManualTime	1.3.6.1.4.1.4325.3.4.6	DisplayString	read-write	Used to specify the local clock time manually. It should be entered in the 'mm/dd/yyyy hh:mm:ss' format that is, month/day/year hour:minute:second. When the user sends a set request on this parameter, the aniBsuClkSntpEnable value is automatically set to disable(2), to set this manual time entry on BSU.
STR aniBsuClkCurrentTime	1.3.6.1.4.1.4325.3.4.7	DisplayString	read-only	The Current Time in 'mm/dd/yy hh:mm:ss' format, that is, month/day/year hour:minute:second.

RFC description

Configures clock time and SNTP synchronization on Aperto Networks base station units (BSU) including timezone and DST.

Start monitoring Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BSUCLK-MIB

What Is BSUCLK-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description