BSUSTATUS-MIB

All MIBs › BSUSTATUS-MIB

Organization: Aperto Networks

Last Updated: 2002-09-25

Category: Vendor: Alvarion, Wireless and WLAN

Description: Reports operational status and alarm conditions for Alvarion BreezeACCESS base station unit (BSU) devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BSUSTATUS-MIB?

BSUSTATUS-MIB is an Alvarion vendor MIB reporting operational status and alarm conditions for the Base Station Unit (BSU) in BreezeACCESS fixed wireless broadband access systems. It exposes system boot state, system uptime, configured versus present port counts, subscriber unit (SU) counts, cell configuration (name, radius, sync timing reference), routing flag state, and a per-radio status table for each radio connected to the BSU. Its monitoring value is squarely hardware/software status: aniBsuStatusBootState and aniBsuStatusSysUpTime reveal reboot or crash events, mismatches between configured and present ports indicate hardware faults, and the radio table shows the health of each individual radio interface serving subscriber units. It is a self-contained wireless-access vendor MIB, generally used alongside standard IF-MIB for the underlying radio interfaces. Deployment context is fixed wireless broadband access networks where a BSU serves many subscriber stations over point-to-multipoint radio links, monitored by the wireless ISP's NOC. Engineers can download the BSUSTATUS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BSUSTATUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alvarion BreezeACCESS Base Station Unit (fixed wireless access)

Monitoring Examples

An operator would poll aniBsuStatusSysUpTime to detect an unexpected reboot and cross-check aniBsuStatusBootState for the cause, while comparing aniBsuStatusNumPortsConf against aniBsuStatusNumPortsPresent to catch a failed port card. Polling aniBsuStatusRadioTable/aniBsuStatusRadioEntry per radio reveals which specific radio has lost sync or dropped its subscriber count. A drop in aniBsuStatusSuCounts without a corresponding radio fault would suggest a coverage or interference issue rather than hardware failure.

What Can Be Monitored

system boot state and uptime
configured vs present port count
subscriber unit counts
per-radio operational status
cell sync timing reference
cell name/radius configuration

Imported Objects

From ANIROOT-MIB

bsu	OBJECT-IDENTITY

From BSUWIRELESSIF-MIB

aniBsuWirelessPort

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
aniBsuStatus	1.3.6.1.4.1.4325.3.1			This group shows the Status Information for the BSU. The aniBsuStatusRadioTable shows the information for each radio that is connected to the BSU.
INT aniBsuStatusBootState	1.3.6.1.4.1.4325.3.1.1	INTEGER	read-only	Shows the current state of the BSU.
STR aniBsuStatusSysUpTime	1.3.6.1.4.1.4325.3.1.2	DisplayString	read-only	Time for which the system has been up and running, displayed as a string in 'days hours mins secs' format.
INT aniBsuStatusNumPortsConf	1.3.6.1.4.1.4325.3.1.3	INTEGER	read-only	The number of wireless ports configured.
INT aniBsuStatusNumPortsPresent	1.3.6.1.4.1.4325.3.1.4	INTEGER	read-only	The number of wireless ports actually available.
INT aniBsuStatusSuCounts	1.3.6.1.4.1.4325.3.1.5	INTEGER	read-only	The total SUs linked to the BSU.
STR aniBsuStatusCellName	1.3.6.1.4.1.4325.3.1.6	DisplayString	read-only	The name of the Cell this BSU belongs to. When BSU is in point to point mode, this parameter is not applicable and will display an empty string. Similarly for PacketWave 750, this parameter is not applicable and will display an empty string.
INT aniBsuStatusCellRadius	1.3.6.1.4.1.4325.3.1.7	INTEGER	read-only	The Cell Radius in km. When BSU is in point to point mode, this object can be referred to as link distance.
INT aniBsuStatusSyncTimingRef	1.3.6.1.4.1.4325.3.1.8	INTEGER	read-only	This flag shows whether timing reference is internal (1) or external (2) for this BSU. When BSU is running in point to point mode, this object is not-applicable. Similarly for PacketWave 750, this object is not-applicable.
INT aniBsuStatusRipFlag	1.3.6.1.4.1.4325.3.1.9	INTEGER	read-only	This flag shows whether RIP is enabled(1) or disabled(2) for this BSU. This is always disabled when BSU is in bridge mode.
INT aniBsuStatusMode	1.3.6.1.4.1.4325.3.1.10	INTEGER	read-only	The mode of the BSU.
aniBsuStatusRadioTable	1.3.6.1.4.1.4325.3.1.11		not-accessible	This table shows the status of each radio that is connected to the BSU. The radio has to be operational for information to be displayed. The radio status is shown on a per wireless port basis.
aniBsuStatusRadioEntry	1.3.6.1.4.1.4325.3.1.11.1		not-accessible	An entry with objects that provide information for each radio connected to the BSU.
STR aniBsuStatusRadioSerialNum	1.3.6.1.4.1.4325.3.1.11.1.1	DisplayString	read-only	The serial number of the radio board.
STR aniBsuStatusRadioFrequency	1.3.6.1.4.1.4325.3.1.11.1.2	DisplayString	read-only	The radio frequency in MHz.
INT aniBsuStatusRadioBand	1.3.6.1.4.1.4325.3.1.11.1.3	INTEGER	read-only	The radio frequency band.
STR aniBsuStatusRadioEepromRev	1.3.6.1.4.1.4325.3.1.11.1.4	DisplayString	read-only	The radio EEPROM content revision number.
INT aniBsuStatusRadioVRFlag	1.3.6.1.4.1.4325.3.1.11.1.5	INTEGER	read-only	The status of the voltage regulator.
INT aniBsuStatusRadioSynth1Lock	1.3.6.1.4.1.4325.3.1.11.1.6	INTEGER	read-only	The status of the radio synthesizer 1 lock.
INT aniBsuStatusRadioSynth2Lock	1.3.6.1.4.1.4325.3.1.11.1.7	INTEGER	read-only	The status of the radio synthesizer 1 lock.
STR aniBsuStatusRadioTxGain	1.3.6.1.4.1.4325.3.1.11.1.8	DisplayString	read-only	The radio transmit gain in dB.
I32 aniBsuStatusRadioRxGain	1.3.6.1.4.1.4325.3.1.11.1.9	Integer32	read-only	The radio receive gain in dB.
STR aniBsuStatusRadioCurrentTxMaxPower	1.3.6.1.4.1.4325.3.1.11.1.10	DisplayString	read-only	The radio current transmit maxium power in dBm
STR aniBsuStatusRadioIfCableLoss	1.3.6.1.4.1.4325.3.1.11.1.11	DisplayString	read-only	The calculated IF cable loss in dB

RFC description

Monitors status information for Base Station Units (BSU), including radio port status and boot state.

Start monitoring Alvarion base station units with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BSUSTATUS-MIB

What Is BSUSTATUS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description