All MIBs › BSU-BRGCLUSTER-MIB
Organization: Aperto Networks
Last Updated: 2002-09-25
Category: VLAN and Bridging, Vendor: Alvarion, Wireless and WLAN
Description: Manages bridge cluster configuration and membership for Alvarion BreezeACCESS base station units.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BSU-BRGCLUSTER-MIB?
BSU-BRGCLUSTER-MIB is an Alvarion enterprise MIB for configuring bridge clustering on BreezeACCESS base station units (BSUs), a feature that groups multiple base stations into a bridged cluster for coordinated Layer 2 forwarding. It exposes a small set of bridging/clustering configuration objects, notably a simple enable flag for subscriber-unit bridging behavior, rather than detailed runtime statistics. Its monitoring value is limited and configuration-oriented: confirming whether bridge-cluster mode (aniBsuSuBridgeEnable) is turned on for a given deployment, which is a prerequisite for correct Layer 2 forwarding across clustered base stations, though the module description notes this group does not apply in point-to-point mode or on the PacketWave 750 platform. It depends on the broader Alvarion BreezeACCESS base station platform and its clustering/configuration-manager tooling rather than standard IETF bridging MIBs. It is deployed by fixed-wireless operators running multiple BreezeACCESS base stations in a clustered, non-point-to-point topology, typically after a BSU-BRGCLUSTER-MIB download to load the module into the operator's SNMP management tool.
IPNetwork Monitor allows you to monitor SNMP objects defined in BSU-BRGCLUSTER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU)
Monitoring Examples
An operator would check aniBsuSuBridgeEnable to confirm bridge-cluster mode is enabled on a base station before troubleshooting Layer 2 forwarding issues between clustered BSUs. Because the module description notes this feature does not apply to point-to-point links or the PacketWave 750 platform, an unexpectedly disabled value on a clustered non-PacketWave-750 deployment would flag a misconfiguration. Beyond this single flag, the sample data provided does not include additional runtime objects to describe further monitoring scenarios.
What Can Be Monitored
- bridge cluster enable state
Imported Objects
From ANIROOT-MIB
| bsu | OBJECT-IDENTITY |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString |
OIDs
RFC description
Vendor-private MIB for bridge clustering management in Blue Coat Systems (BSU) products.
Start monitoring Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.