NSCRTV-FTTX-GPON-MIB

All MIBs › NSCRTV-FTTX-GPON-MIB

Category: CATV and HFC

Description: Manages GPON OLT port provisioning, ONU registration, and fiber plant status for NSCRTV FTTx deployments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NSCRTV-FTTX-GPON-MIB?

NSCRTV-FTTX-GPON-MIB is a vendor MIB from NSCRTV for Gigabit Passive Optical Network (GPON) fiber-to-the-x (FTTx) equipment, covering OLT port provisioning, ONU (subscriber optical network unit) registration, and the physical fiber plant. It exposes an optical-layer property table for each ONU's PON port alongside provisioning/registration state for ONUs joining the OLT. Its monitoring emphasis is hardware/optical status: the optical transmission property table lets operators track per-ONU laser transmit power, receive signal levels, and related optical parameters to catch a degrading fiber link, failing ONU transceiver, or dirty/broken fiber connector before it causes a subscriber outage. It typically works alongside standard GPON/EPON interface MIBs and IF-MIB for indexing the underlying PON ports. It is deployed by cable/telecom operators running GPON FTTx access networks to manage OLT-to-ONU fiber-plant health and subscriber provisioning. Engineers can download the NSCRTV-FTTX-GPON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NSCRTV-FTTX-GPON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

GPON OLT (Optical Line Terminal)
GPON ONU (Optical Network Unit)

Monitoring Examples

An operator polls gponOnuPonPortOpticalTransmissionPropertyTable for a specific ONU to read its optical transmit/receive power levels; a receive-power reading that has dropped significantly from baseline points to fiber attenuation, a dirty connector, or a failing ONU optical transceiver requiring a truck roll.

What Can Be Monitored

ONU optical transmit/receive power
PON port optical transmission properties
ONU registration/provisioning status
fiber plant optical health

Imported Objects

From BRIDGE-MIB

BridgeId
Timeout

From SNMPv2-SMI

BITS
Counter32
Counter64
Gauge32
IpAddress
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
nscrtvRoot	1.3.6.1.4.1.17409
nscrtvHFCemsTree	1.3.6.1.4.1.17409.1
nscrtvFTTxTree	1.3.6.1.4.1.17409.2
propertyIdent	1.3.6.1.4.1.17409.2.1
alarmsIdent	1.3.6.1.4.1.17409.2.2
gponAlarmTree	1.3.6.1.4.1.17409.2.2.12
gponTrapObjectGroup	1.3.6.1.4.1.17409.2.2.12.1
gponNotifications	1.3.6.1.4.1.17409.2.2.12.1.1
NTF gponAlarmNotification	1.3.6.1.4.1.17409.2.2.12.1.1.1			Alarm TRAP definition
NTF gponEventNotification	1.3.6.1.4.1.17409.2.2.12.1.1.2			Event TRAP definition
gponTrapObjects	1.3.6.1.4.1.17409.2.2.12.1.2
GPO gponTrapInstance	1.3.6.1.4.1.17409.2.2.12.1.2.1	GponAlarmInstance	accessible-for-notify	Alarm instance, indicates the detailed managed object, which detects faults.
U32 gponTrapCorrelationId	1.3.6.1.4.1.17409.2.2.12.1.2.2	Unsigned32	accessible-for-notify	The unique sequence number for the alarm to be cleared, for alarm clearing. Set to 0 for alarm reporting
OCT gponTrapAdditionalText	1.3.6.1.4.1.17409.2.2.12.1.2.3	OCTET STRING	accessible-for-notify	Additional info to the alarm, for further desciption of the alarm. The format of it shall be related to each kind alarm defined in alarm reference table
GPO gponTrapCode	1.3.6.1.4.1.17409.2.2.12.1.2.4	GponAlarmCode	accessible-for-notify
GPO gponTrapSeverity	1.3.6.1.4.1.17409.2.2.12.1.2.5	GponSeverityType	accessible-for-notify
DAT gponTrapOccurTime	1.3.6.1.4.1.17409.2.2.12.1.2.6	DateAndTime	accessible-for-notify
U32 gponTrapSequenceNumber	1.3.6.1.4.1.17409.2.2.12.1.2.7	Unsigned32	accessible-for-notify	A unique sequence number for each trap generated by node. The sequence number shall be reset to 1 when node restarts. The alarm sequence number shall be independent of the event sequence number. Each shall be self-governed. -------------------------------------------------------------------------------- The sequence ID of alarm shall be assigned from the order of transmitting trap to the NMS, instead of the order of alarm occurance. Therefore the NMS will receive the continuous sequence ID. 1. When device is in active/standby mode, sequence ID shall be synchronized between active and standby control module. 2. When control module switchover takes place, the current sequence ID shall keep the synchronized value. 3. When device restarts, sequence ID shall start from 1. 4. It shall be increased per alarm trap including both alarm raising and clear. 5. Non-zero value shall be used. When reaches the maximum number, it shall roll back to 1. -------------------------------------------------------------------------------- The sequence ID of event shall be assigned from the order of transmitting trap to the NMS. Therefore the NMS will receive the continuous sequence ID. 1. When device is in active/standby mode, sequence ID shall be synchronized between active and standby control module. 2. When control module switchover takes place, the current sequence ID shall keep the synchronized value. 3. When device restarts, sequence ID shall start from 1. 4. It shall be increased per event trap. 5. Non-zero value shall be used. When reaches the maximum number, it shall roll back to 1.
gponAlarmObjGroup	1.3.6.1.4.1.17409.2.2.12.2
gponActiveAlarmTable	1.3.6.1.4.1.17409.2.2.12.2.1		not-accessible	Active alarm table The device shall maintain this table, to maintain all outstanding (not cleared) alarms generated by the device, including: 1. Not hit device local alarm filter. That means had been reported to trap receiver (NMS or EMS) 2. Hit local alarm filter. That means not trap is reported to trap receiver for the alarm. The device shall maintain two numbers: 1. Alarm sequence number: As described in gponTrapSequenceNumber, it is initially set to 1 when device restarts, increases per trap reported to trap receiver, and rollover to 1 once it reaches the maximum value. From NMS's view, traps received from a nodes will be consecutive, by identifying the alarm sequence number carried in alarm trap. If breaks, means some trap may be lost, since packet loss between NMS and NE. 2. Alarm raising number: This is maintained by NE internally and does not intend for being acknowledged by external manage system. It is designed to uniquely indentify each alarm raised by NE, excluding duplicates. Once one alarm raised, despite whether it is hit by alarm filter, NE shall assign a raising number to it. So, it major functionality is to uniquely identify alarms hit NE local alarm filter, since this kindly alarm will not be reported to NMS, and hence no alarm sequence number is assigned to it. It is initially set to 1 when device restarts, increases per alarm generation ( excluding duplicates), and rollover to 1 once it reaches the maximum value. FUNCTION DESCRIPTION OF ACTIVE ALARM TABLE: ALARM RAISING ---------------------- 1. When NE detects one fault and associates to one kind of alarm, it shall check whether there is same alarm in active alarm table, which is indexed by alarm code and alarm instance. If hits, it means duplicates, update the corresponding entry of the table. Otherwise, 2. The alarm is not a duplicate. Assign an alarm raising number. Check whether the alarm hits local alarm filters. If hits, set alarm sequence number to 0. Create an entry into active alarm table. Otherwise, 3. Assign an alarm sequence number to the alarm. Create an entry into active alarm table. Report the alarm trap to all trap receivers. ALARM CLEARING ---------------------- 1. When NE detects one fault is cleared and associates to one kind of alarm, it shall check whether there is corresponding alarm in active alarm table, which is indexed by alarm code and alarm instance. If no hit, escape this clear event. Upon a hit, if the alarm sequence number is 0, move the active alarm entry to history alarm table and update the corresponding fields. At this case, historyAlarmCorrelationId and historyAlarmSeqNum will be set to 0. Otherwise, 2. Assign an alarm sequence number to the clear trap. Report the alarm clear trap to all trap receivers. Move the active alarm entry to history alarm table and update the corresponding fields. At this case, activeAlarmSeqNum shall be copied to historyAlarmCorrelationId, and historyAlarmSeqNum shall be set to the new alarm sequence number for the clear trap. ALARM SYNCHRONIZATION BETWEEN NE AND NMS --------------------------------------------- 1. Once NMS finds the alarm sequence number in reported alarm traps is not continuous, it will walk active or history alarm table of the NE for the lost seuqence number.
gponActiveAlarmEntry	1.3.6.1.4.1.17409.2.2.12.2.1.1		not-accessible
U32 gponActiveAlarmSeqNum	1.3.6.1.4.1.17409.2.2.12.2.1.1.1	Unsigned32	not-accessible	Alarm sequence number The definition refered to the description of activeAlarmTable
GPO gponActiveAlarmCode	1.3.6.1.4.1.17409.2.2.12.2.1.1.2	GponAlarmCode	read-only
GPO gponActiveAlarmInstance	1.3.6.1.4.1.17409.2.2.12.2.1.1.3	GponAlarmInstance	read-only	Alarm instance, indicates the detailed managed object
GPO gponActiveAlarmSeverity	1.3.6.1.4.1.17409.2.2.12.2.1.1.4	GponSeverityType	read-only
U32 gponActiveAlarmRaisingNumber	1.3.6.1.4.1.17409.2.2.12.2.1.1.5	Unsigned32	not-accessible	Alarm raising number. The definition refered to the description of activeAlarmTable
DAT gponActiveAlarmFirstOccurTime	1.3.6.1.4.1.17409.2.2.12.2.1.1.6	DateAndTime	read-only	The time stamp when alarm occurs, which triggered to create the active alarm entry.
DAT gponActiveAlarmLastOccurTime	1.3.6.1.4.1.17409.2.2.12.2.1.1.7	DateAndTime	read-only	The time stamp when alarm occurs, where the alarm is duplicated with existed active alarm entry, and it was the latest one.
C32 gponActiveAlarmRepeats	1.3.6.1.4.1.17409.2.2.12.2.1.1.8	Counter32	read-only	Number of repeated alarms for this active alarm entry
T/F gponActiveAlarmConfirm	1.3.6.1.4.1.17409.2.2.12.2.1.1.9	TruthValue	read-write	Node shall not clear an active alarm, upon the confirmation of the active alarm, but just mark an acknowledged status. An alarm will only be cleared once the clear condition hits.
OCT gponActiveAlarmAdditionalText	1.3.6.1.4.1.17409.2.2.12.2.1.1.10	OCTET STRING	read-only	Additional info to the alarm, for further desciption of the alarm. The format of it shall be related to each kind alarm defined in alarm reference table
gponHistoryAlarmTable	1.3.6.1.4.1.17409.2.2.12.2.2		not-accessible	History alarm table. The device shall maintain this table, to maintain all cleared alarms generated by the device, including: 1. Not hit device local alarm filter. That means had been reported to trap receiver (NMS or EMS) 2. Hit local alarm filter. That means not trap is reported to trap receiver for the alarm. The number of history alarm enteries in the table could be device-specific. However, it is recommended no less than 200 entries. The detailed function definition refers to that given in description of activeAlarmTable.
gponHistoryAlarmEntry	1.3.6.1.4.1.17409.2.2.12.2.2.1		not-accessible
U32 gponHistoryAlarmSeqNum	1.3.6.1.4.1.17409.2.2.12.2.2.1.1	Unsigned32	not-accessible	Alarm sequence number The definition refered to the description of gponHistoryAlarmTable
GPO gponHistoryAlarmCode	1.3.6.1.4.1.17409.2.2.12.2.2.1.2	GponAlarmCode	read-only
GPO gponHistoryAlarmInstance	1.3.6.1.4.1.17409.2.2.12.2.2.1.3	GponAlarmInstance	read-only	Alarm instance, indicates the detailed managed object
GPO gponHistoryAlarmSeverity	1.3.6.1.4.1.17409.2.2.12.2.2.1.4	GponSeverityType	read-only
U32 gponHistoryAlarmRaisingNumber	1.3.6.1.4.1.17409.2.2.12.2.2.1.5	Unsigned32	not-accessible	Alarm raising number. The definition refered to the description of gponHistoryAlarmTable
DAT gponHistoryAlarmFirstOccurTime	1.3.6.1.4.1.17409.2.2.12.2.2.1.6	DateAndTime	read-only	The time stamp when alarm occurs, which triggered to create the history alarm entry.
DAT gponHistoryAlarmLastOccurTime	1.3.6.1.4.1.17409.2.2.12.2.2.1.7	DateAndTime	read-only	The time stamp when alarm occurs, where the alarm is duplicated with existed history alarm entry, and it was the latest one.
C32 gponHistoryAlarmRepeats	1.3.6.1.4.1.17409.2.2.12.2.2.1.8	Counter32	read-only	Number of repeated alarms for this history alarm entry
U32 gponHistoryAlarmCorrelationId	1.3.6.1.4.1.17409.2.2.12.2.2.1.9	Unsigned32	read-only	It is the corresponding sequence ID of the alarm that to be cleared.
OCT gponHistoryAlarmAdditionalText	1.3.6.1.4.1.17409.2.2.12.2.2.1.10	OCTET STRING	read-only	Additional info to the alarm, for further desciption of the alarm. The format of it shall be related to each kind alarm defined in alarm reference table
DAT gponHistoryAlarmClearTime	1.3.6.1.4.1.17409.2.2.12.2.2.1.11	DateAndTime	read-only	Define when the alarm was cleared
gponEventLogTable	1.3.6.1.4.1.17409.2.2.12.2.3		not-accessible	Event log table. The device shall maintain this table, to maintain all events had be reported by the device, including: 1. The event table shall be saved in RAM memory and shall be flushed when OLT restarts. 2. The event log table shall support no less than 200 entries. When the event log table is full, the oldest entry in the table shall be removed first. 3. When OLT is configured with control module redundancy, active controller shall automatically synchronize the events in event log table b/w active and standby.
gponEventLogEntry	1.3.6.1.4.1.17409.2.2.12.2.3.1		not-accessible
U32 gponEventSeqNum	1.3.6.1.4.1.17409.2.2.12.2.3.1.1	Unsigned32	not-accessible	Event sequence number The definition refered to the description of gponTrapSequenceNumber
GPO gponEventCode	1.3.6.1.4.1.17409.2.2.12.2.3.1.2	GponAlarmCode	read-only
GPO gponEventInstance	1.3.6.1.4.1.17409.2.2.12.2.3.1.3	GponAlarmInstance	read-only	Event instance, indicates the detailed managed object
DAT gponEventOccurTime	1.3.6.1.4.1.17409.2.2.12.2.3.1.4	DateAndTime	read-only	The time stamp when event occurs
OCT gponEventAdditionalText	1.3.6.1.4.1.17409.2.2.12.2.3.1.5	OCTET STRING	read-only	Additional info to the event, for further desciption of the event. The format of it shall be related to each kind event defined in event reference table
gponManagementObjGroup	1.3.6.1.4.1.17409.2.2.12.3
gponManagementAddrTable	1.3.6.1.4.1.17409.2.2.12.3.1		not-accessible	A table of transport addresses to be used in the generation of SNMP messages.
gponManagementAddrEntry	1.3.6.1.4.1.17409.2.2.12.3.1.1		not-accessible	A transport address to be used in the generation of SNMP operations. Entries in the snmpTargetAddrTable are created and deleted using the snmpTargetAddrRowStatus object.
OCT gponManagementAddrName	1.3.6.1.4.1.17409.2.2.12.3.1.1.1	OCTET STRING	not-accessible
ADR gponManagementAddrTAddress	1.3.6.1.4.1.17409.2.2.12.3.1.1.2	TAddress	read-create
OCT gponManagementAddrCommunity	1.3.6.1.4.1.17409.2.2.12.3.1.1.3	OCTET STRING	read-create
ROW gponManagementAddrRowStatus	1.3.6.1.4.1.17409.2.2.12.3.1.1.4	RowStatus	read-create
gponTree	1.3.6.1.4.1.17409.2.8
gponPonPortObjects	1.3.6.1.4.1.17409.2.8.3
gponOnuAuthenticationModeTable	1.3.6.1.4.1.17409.2.8.3.4		not-accessible
gponOnuAuthenticationModeEntry	1.3.6.1.4.1.17409.2.8.3.4.1		not-accessible	The gponOnuAuthenticationModeEntry Information
INT gponAuthenDeviceIndex	1.3.6.1.4.1.17409.2.8.3.4.1.1	INTEGER	not-accessible
GPO gponAuthenCardIndex	1.3.6.1.4.1.17409.2.8.3.4.1.2	GponCardIndex	not-accessible
GPO gponAuthenPortIndex	1.3.6.1.4.1.17409.2.8.3.4.1.3	GponPortIndex	not-accessible	pon
INT gponOnuAuthenMode	1.3.6.1.4.1.17409.2.8.3.4.1.4	INTEGER	read-write	Authen mode;This is mode in authen
INT gponAutoFindEnable	1.3.6.1.4.1.17409.2.8.3.4.1.5	INTEGER	read-write	AutoFindEnable.
gponOnuObjects	1.3.6.1.4.1.17409.2.8.4
gponOnuInfoTable	1.3.6.1.4.1.17409.2.8.4.1		not-accessible	A list of gponOnuInfoTable entries.
gponOnuInfoEntry	1.3.6.1.4.1.17409.2.8.4.1.1		not-accessible	The gponOnuInfoEntry Information
GPO onuDeviceIndex	1.3.6.1.4.1.17409.2.8.4.1.1.1	GponDeviceIndex	not-accessible	onuDevice Index
STR onuName	1.3.6.1.4.1.17409.2.8.4.1.1.2	DisplayString	read-write	onu Name
OCT onuSerialNum	1.3.6.1.4.1.17409.2.8.4.1.1.3	OCTET STRING	read-only	ONU serial number.
INT onuType	1.3.6.1.4.1.17409.2.8.4.1.1.4	INTEGER	read-only	onu Type fixed(1) - not slot concept chassisBased(2) - port is indexed by coupling slot ID
OCT onuVendorID	1.3.6.1.4.1.17409.2.8.4.1.1.5	OCTET STRING	read-only	ONU vendor id.
OCT onuEquipmentID	1.3.6.1.4.1.17409.2.8.4.1.1.6	OCTET STRING	read-only	ONU model id.
INT onuOperationStatus	1.3.6.1.4.1.17409.2.8.4.1.1.7	INTEGER	read-only	onu Operation Status
INT onuAdminStatus	1.3.6.1.4.1.17409.2.8.4.1.1.8	INTEGER	read-write	onu Admin Status
INT onuTestDistance	1.3.6.1.4.1.17409.2.8.4.1.1.9	INTEGER	read-only	onu Test Distance
INT resetONU	1.3.6.1.4.1.17409.2.8.4.1.1.10	INTEGER	read-write	reset ONU
INT onuDeactive	1.3.6.1.4.1.17409.2.8.4.1.1.11	INTEGER	read-write	Description.
C32 onuTimeSinceLastRegister	1.3.6.1.4.1.17409.2.8.4.1.1.12	Counter32	read-only	Description.
C32 onuSysUpTime	1.3.6.1.4.1.17409.2.8.4.1.1.13	Counter32	read-only	Description.
STR onuHardwareVersion	1.3.6.1.4.1.17409.2.8.4.1.1.14	DisplayString	read-only	Description.
T/F onuPerfStats15minuteEnable	1.3.6.1.4.1.17409.2.8.4.1.1.15	TruthValue	read-write	Description.
T/F onuPerfStats24hourEnable	1.3.6.1.4.1.17409.2.8.4.1.1.16	TruthValue	read-write	Description.
onuInfoSoftwareTable	1.3.6.1.4.1.17409.2.8.4.2		not-accessible	Description.
onuInfoSoftwareEntry	1.3.6.1.4.1.17409.2.8.4.2.1		not-accessible	Description.
INT onuSoftwareDeviceIndex	1.3.6.1.4.1.17409.2.8.4.2.1.1	INTEGER	not-accessible	Description.
STR onuSoftware0Version	1.3.6.1.4.1.17409.2.8.4.2.1.2	DisplayString	read-only	Description.
INT onuSoftware0Valid	1.3.6.1.4.1.17409.2.8.4.2.1.3	INTEGER	read-only	Description.
INT onuSoftware0Active	1.3.6.1.4.1.17409.2.8.4.2.1.4	INTEGER	read-write	Description.
INT onuSoftware0Commited	1.3.6.1.4.1.17409.2.8.4.2.1.5	INTEGER	read-write	Description.
STR onuSoftware1Version	1.3.6.1.4.1.17409.2.8.4.2.1.6	DisplayString	read-only	Description.
INT onuSoftware1Valid	1.3.6.1.4.1.17409.2.8.4.2.1.7	INTEGER	read-only	Description.
INT onuSoftware1Active	1.3.6.1.4.1.17409.2.8.4.2.1.8	INTEGER	read-write	Description.
INT onuSoftware1Commited	1.3.6.1.4.1.17409.2.8.4.2.1.9	INTEGER	read-write	Description.
onuIpHostTable	1.3.6.1.4.1.17409.2.8.4.3		not-accessible	Description.
onuIpHostEntry	1.3.6.1.4.1.17409.2.8.4.3.1		not-accessible	Description.
INT onuIpHostDeviceIndex	1.3.6.1.4.1.17409.2.8.4.3.1.1	INTEGER	not-accessible	Description.
INT onuIpHostIndex	1.3.6.1.4.1.17409.2.8.4.3.1.2	INTEGER	not-accessible	Description.
INT onuIpHostAddressConfigMode	1.3.6.1.4.1.17409.2.8.4.3.1.3	INTEGER	read-write	Description.
IP onuIpHostAddress	1.3.6.1.4.1.17409.2.8.4.3.1.4	IpAddress	read-write	Description.
IP onuIpHostSubnetMask	1.3.6.1.4.1.17409.2.8.4.3.1.5	IpAddress	read-write	Description.
IP onuIpHostGateway	1.3.6.1.4.1.17409.2.8.4.3.1.6	IpAddress	read-write	Description.
IP onuIpHostPrimaryDNS	1.3.6.1.4.1.17409.2.8.4.3.1.7	IpAddress	read-write	Description.
IP onuIpHostSecondaryDNS	1.3.6.1.4.1.17409.2.8.4.3.1.8	IpAddress	read-write	Description.
INT onuIpHostVlanTagPriority	1.3.6.1.4.1.17409.2.8.4.3.1.9	INTEGER	read-write	Description.
INT onuIpHostVlanPvid	1.3.6.1.4.1.17409.2.8.4.3.1.10	INTEGER	read-write	Description.
MAC onuIpHostMacAddress	1.3.6.1.4.1.17409.2.8.4.3.1.11	MacAddress	read-only	Description.
ROW onuIpHostRowStatus	1.3.6.1.4.1.17409.2.8.4.3.1.12	RowStatus	read-create	Description.
gponOnuPonPortOpticalTransmissionPropertyTable	1.3.6.1.4.1.17409.2.8.4.4		not-accessible	This table is designed for both OLT and ONU Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT - OnuNum of GponDeviceIndex TC shall be set to 0, onuPonPortOpticalTransmissionPropertyCardIndex, and onuPonPortOpticalTransmissionPropertyPortIndex set to 65535 indicates meaningless ONU - Set GponDeviceIndex TC to corresponding ONU ID, onuPonPortOpticalTransmissionPropertyCardIndex, and onuPonPortOpticalTransmissionPropertyPortIndex set to the corresponding value
gponOnuPonPortOpticalTransmissionPropertyEntry	1.3.6.1.4.1.17409.2.8.4.4.1		not-accessible	The gponOnuPonPortOpticalTransmissionPropertyEntry Information
GPO onuPonPortOpticalTransmissionPropertyDeviceIndex	1.3.6.1.4.1.17409.2.8.4.4.1.1	GponDeviceIndex	not-accessible	Device Index of the ONU.
INT onuPonPortOpticalTransmissionPropertyCardIndex	1.3.6.1.4.1.17409.2.8.4.4.1.2	INTEGER	not-accessible	Card Index in the ONU. Shall set to 0, if ONU is not a modulized device
INT onuPonPortOpticalTransmissionPropertyPortIndex	1.3.6.1.4.1.17409.2.8.4.4.1.3	INTEGER	not-accessible	Port Index in the Pon card of ONU
INT onuReceivedOpticalPower	1.3.6.1.4.1.17409.2.8.4.4.1.4	INTEGER	read-only	received Optical Power
INT onuTramsmittedOpticalPower	1.3.6.1.4.1.17409.2.8.4.4.1.5	INTEGER	read-only	tramsmitted Optical Power
INT onuBiasCurrent	1.3.6.1.4.1.17409.2.8.4.4.1.6	INTEGER	read-only	biasCurrent
INT onuWorkingVoltage	1.3.6.1.4.1.17409.2.8.4.4.1.7	INTEGER	read-only	onuworking Voltage
INT onuWorkingTemperature	1.3.6.1.4.1.17409.2.8.4.4.1.8	INTEGER	read-only	working Temperature
onuCapabilityTable	1.3.6.1.4.1.17409.2.8.4.5		not-accessible	A list of onuInfoTable entries.
onuCapabilityEntry	1.3.6.1.4.1.17409.2.8.4.5.1		not-accessible	The onuCapabilityEntry Information
GPO onuCapabilityDeviceIndex	1.3.6.1.4.1.17409.2.8.4.5.1.1	GponDeviceIndex	not-accessible	onu Device Index
INT onuOMCCVersion	1.3.6.1.4.1.17409.2.8.4.5.1.2	INTEGER	read-only	0x80 ITU-T G.984.4 (06/04) NOTE \u9225\ufffdFor historical reasons, this code point may also appear in ONUs that support later versions of [ITU-T G.984.4]. 0x81 ITU-T G.984.4 2004 Amd.1 (06/05) 0x82 ITU-T G.984.4 2004 Amd.2 (03/06) 0x83 ITU-T G.984.4 2004 Amd.3 (12/06) 0x84 ITU-T G.984.4 2008 (02/08) 0x85 ITU-T G.984.4 2008 Amd.1 (06/09) 0x86 ITU-T G.984.4 2008 Amd.2 (2009). Baseline message set only, without the extended message set option 0x96 ITU-T G.984.4 2008 Amd.2 (2009). Extended message set option, in addition to the baseline message set.54 Rec. ITU-T G.988 (10/2012) 0xA0 ITU-T G.988 (2010). Baseline message set only, without the extended message set option 0xA1 ITU-T G.988 Amd.1 (2011). Baseline message set only 0xA2 ITU-T G.988 Amd.2 (2012). Baseline message set only 0xA3 ITU-T G.988 (2012). Baseline message set only 0xB0 ITU-T G.988 (2010). Baseline and extended message set 0xB1 ITU-T G.988 Amd.1 (2011). Baseline and extended message set 0xB2 ITU-T G.988 Amd.2 (2012). Baseline and extended message set 0xB3 ITU-T G.988 (2012). Baseline and extended message set
INT onuTotalEthNum	1.3.6.1.4.1.17409.2.8.4.5.1.3	INTEGER	read-only	gePort Bitmap In slot+port pair list manner. Suppose each slot support up to 64 ports. One octet to indentify slot and 8 octets to identify portbitmap for the slot. The bitmap definition is internet sequence. The most left bit is for port 1 of the slot, the most right bit is for port 64 of the slot. If the slot cannot support 64 ports, set the bits of not supported ports to 0. If the port is GE port, set the corresponding bit to 1. Since the slot num depends on each individual device, the object is variable length. If the device is fixed box (not modulized), set the slot number to 255. Then the network management system could ignore the slot info. It is not necessary to list the slot doesn't support GE port. For example, if have 4 GE ports, of: 1/4, 1/6, 2/3, 4/17, the object will be presented in: 01 14 00 00 00 00 00 00 00 02 20 00 00 00 00 00 00 00 04 00 00 80 00 00 00 00 00 Another example, for fixed box, if have 4 ge ports of 4,6,10,17, the object will be presented as: FF 14 40 10 00 00 00 00
INT onuTotalWlanNum	1.3.6.1.4.1.17409.2.8.4.5.1.4	INTEGER	read-only	fePort Num
INT onuTotalCatvNum	1.3.6.1.4.1.17409.2.8.4.5.1.5	INTEGER	read-only
INT onuTotalVeipNum	1.3.6.1.4.1.17409.2.8.4.5.1.6	INTEGER	read-only
INT onuIpHostNum	1.3.6.1.4.1.17409.2.8.4.5.1.7	INTEGER	read-only
INT onuTrafficMgmtOption	1.3.6.1.4.1.17409.2.8.4.5.1.8	INTEGER	read-only	0: Priority controlled and flexibly scheduled upstream traffic. 1: Rate controlled upstream traffic. 2: Priority and rate controlled.
INT onuTotalGEMPortNum	1.3.6.1.4.1.17409.2.8.4.5.1.9	INTEGER	read-only
INT onuTotalTContNum	1.3.6.1.4.1.17409.2.8.4.5.1.10	INTEGER	read-only
BIT onuConnectCapbility	1.3.6.1.4.1.17409.2.8.4.5.1.11	Bits	read-only	1 (LSB) N:1 bridging, Figure 8.2.2-3 2 1:M mapping, Figure 8.2.2-4 3 1:P filtering, Figure 8.2.2-5 4 N:M bridge-mapping, Figure 8.2.2-6 5 1:MP map-filtering, Figure 8.2.2-7 6 N:P bridge-filtering, Figure 8.2.2-8 7 N:MP bridge-map-filtering, Figure 8.2.2-9 8-16 Reserved
BIT onuQosFlexibility	1.3.6.1.4.1.17409.2.8.4.5.1.12	Bits	read-only	1 (LSB) Priority queue ME: Port field of related port attribute is read-write and can point to any T-CONT or UNI port in the same slot 2 Priority queue ME: The traffic scheduler pointer is permitted to refer to any other traffic scheduler in the same slot 3 Traffic scheduler ME: T-CONT pointer is read-write 4 Traffic scheduler ME: Policy attribute is read-write 5 T-CONT ME: Policy attribute is read-write 6 Priority queue ME: Priority field of related port attribute is read-write 7..16 Reserved
onuAuthenticationManagement	1.3.6.1.4.1.17409.2.8.4.6
onuAuthenticationConfigTable	1.3.6.1.4.1.17409.2.8.4.6.1		not-accessible	A list of onuAuthenticationPreConfigTable entries.
onuAuthenticationConfigEntry	1.3.6.1.4.1.17409.2.8.4.6.1.1		not-accessible	The onuAuthenticationPreConfigEntry Information
INT onuAuthenOnuId	1.3.6.1.4.1.17409.2.8.4.6.1.1.1	INTEGER	not-accessible	onu logical ID
OCT onuAuthenSN	1.3.6.1.4.1.17409.2.8.4.6.1.1.2	OCTET STRING	read-create	onu Mac Address
STR onuAuthenPassword	1.3.6.1.4.1.17409.2.8.4.6.1.1.3	DisplayString	read-create	Authen Action This is optional in function
STR onuAuthenLoid	1.3.6.1.4.1.17409.2.8.4.6.1.1.4	DisplayString	read-create	Description.
STR onuAuthenLoidPassword	1.3.6.1.4.1.17409.2.8.4.6.1.1.5	DisplayString	read-create	Description.
INT onuAuthenLineProfileId	1.3.6.1.4.1.17409.2.8.4.6.1.1.6	INTEGER	read-create	Description.
INT onuAuthenSrvProfileId	1.3.6.1.4.1.17409.2.8.4.6.1.1.7	INTEGER	read-create	Description.
ROW onuAuthenRowStatus	1.3.6.1.4.1.17409.2.8.4.6.1.1.8	RowStatus	read-create	authen Row Status
onuAutoFindTable	1.3.6.1.4.1.17409.2.8.4.7		not-accessible	Description.
onuAutoFindEntry	1.3.6.1.4.1.17409.2.8.4.7.1		not-accessible	Description.
INT onuAutoFindOnuIndex	1.3.6.1.4.1.17409.2.8.4.7.1.1	INTEGER	not-accessible	Description.
STR onuAutoFindOnuType	1.3.6.1.4.1.17409.2.8.4.7.1.2	DisplayString	read-only	Description.
STR onuAutoFindSerialNumber	1.3.6.1.4.1.17409.2.8.4.7.1.3	DisplayString	read-only	Description.
STR onuAutoFindPassword	1.3.6.1.4.1.17409.2.8.4.7.1.4	DisplayString	read-only	Description.
STR onuAutoFindLoid	1.3.6.1.4.1.17409.2.8.4.7.1.5	DisplayString	read-only	Description.
STR onuAutoFindLoidPassword	1.3.6.1.4.1.17409.2.8.4.7.1.6	DisplayString	read-only	Description.
DAT onuAutoFindTime	1.3.6.1.4.1.17409.2.8.4.7.1.7	DateAndTime	read-only	Description.
STR onuAutoFindSoftwareVersion	1.3.6.1.4.1.17409.2.8.4.7.1.8	DisplayString	read-only	Description.
STR onuAutoFindHardwareVersion	1.3.6.1.4.1.17409.2.8.4.7.1.9	DisplayString	read-only	Description.
onuAutoAuthenticationTable	1.3.6.1.4.1.17409.2.8.4.8		not-accessible	Description.
onuAutoAuthenticationEntry	1.3.6.1.4.1.17409.2.8.4.8.1		not-accessible	Description.
INT onuAutoAuthenIndex	1.3.6.1.4.1.17409.2.8.4.8.1.1	INTEGER	not-accessible	Description.
STR onuAutoAuthenPortlist	1.3.6.1.4.1.17409.2.8.4.8.1.2	DisplayString	read-write	Description.
STR onuAutoAuthenOnuType	1.3.6.1.4.1.17409.2.8.4.8.1.3	DisplayString	read-write	Description.
INT onuAutoAuthenEthNum	1.3.6.1.4.1.17409.2.8.4.8.1.4	INTEGER	read-write	Description.
INT onuAutoAuthenWlanNum	1.3.6.1.4.1.17409.2.8.4.8.1.5	INTEGER	read-write	Description.
INT onuAutoAuthenCatvNum	1.3.6.1.4.1.17409.2.8.4.8.1.6	INTEGER	read-write	Description.
INT onuAutoAuthenVeipNum	1.3.6.1.4.1.17409.2.8.4.8.1.7	INTEGER	read-write	Description.
INT onuAutoAuthenLineProfileId	1.3.6.1.4.1.17409.2.8.4.8.1.8	INTEGER	read-write	Description.
INT onuAutoAuthenSrvProfileId	1.3.6.1.4.1.17409.2.8.4.8.1.9	INTEGER	read-write	Description.
ROW onuAutoAuthenRowStatus	1.3.6.1.4.1.17409.2.8.4.8.1.10	RowStatus	read-create	Description.
gponUniObjects	1.3.6.1.4.1.17409.2.8.5
ethAttributeTable	1.3.6.1.4.1.17409.2.8.5.1		not-accessible	A list of uniAttributeTable entries.
ethAttributeEntry	1.3.6.1.4.1.17409.2.8.5.1.1		not-accessible	The uniAttributeEntry Information
GPO ethAttributeDeviceIndex	1.3.6.1.4.1.17409.2.8.5.1.1.1	GponDeviceIndex	not-accessible	Device Index For OLT, set to corresponding ONU ID For ONU, set to 0
GPO ethAttributeCardIndex	1.3.6.1.4.1.17409.2.8.5.1.1.2	GponCardIndex	not-accessible	Card Index The value of this cardIndex depends on onuType. fixed(1) - set to 0, to indicate slot num is meaningless. chassisBased(2) - MUST NOT be zero
GPO ethAttributePortIndex	1.3.6.1.4.1.17409.2.8.5.1.1.3	GponPortIndex	not-accessible	Port Index
INT ethAdminStatus	1.3.6.1.4.1.17409.2.8.5.1.1.4	INTEGER	read-write	Admin Status
INT ethOperationStatus	1.3.6.1.4.1.17409.2.8.5.1.1.5	INTEGER	read-only	Operation Status
INT ethDuplexRate	1.3.6.1.4.1.17409.2.8.5.1.1.6	INTEGER	read-write
T/F ethPerfStats15minuteEnable	1.3.6.1.4.1.17409.2.8.5.1.1.7	TruthValue	read-write
T/F ethPerfStats24hourEnable	1.3.6.1.4.1.17409.2.8.5.1.1.8	TruthValue	read-write
gponIgmpManagementObjects	1.3.6.1.4.1.17409.2.8.6
gponOnuIgmpProfile	1.3.6.1.4.1.17409.2.8.6.4			ONU Profile
gponOnuIgmpProfileTable	1.3.6.1.4.1.17409.2.8.6.4.1		not-accessible
gponOnuIgmpProfileEntry	1.3.6.1.4.1.17409.2.8.6.4.1.1		not-accessible
INT gponOnuIgmpProfileIndex	1.3.6.1.4.1.17409.2.8.6.4.1.1.1	INTEGER	not-accessible	Profile
STR gponOnuIgmpProfileName	1.3.6.1.4.1.17409.2.8.6.4.1.1.2	DisplayString	not-accessible	Profile\u041e
INT gponOnuIgmpVersion	1.3.6.1.4.1.17409.2.8.6.4.1.1.3	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: IGMP version. This attribute specifies the version of IGMP to be supported. Support of a given version implies compatible support of previous versions.
INT gponOnuIgmpFunction	1.3.6.1.4.1.17409.2.8.6.4.1.1.4	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: IGMP function. This attribute enables an IGMP function. The value 1(value 0 in G.988) specifies transparent IGMP snooping only. The value 2(value 1 in G.988) specifies snooping with proxy reporting(SPR); the value 3(value 2 in G.988) specifies IGMP proxy. The function must be consistent with the capabilities specified by the other IGMP configuration attributes.
INT gponOnuIgmpImmediateLeave	1.3.6.1.4.1.17409.2.8.6.4.1.1.5	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Immediate leave. This Boolean attribute controls the immediate leave function. The value false disables immediate leave; true enables immediate leave.
INT gponOnuIgmpUpstreamProtoTCI	1.3.6.1.4.1.17409.2.8.6.4.1.1.6	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Upstream IGMP TCI. Under control of gponOnuIgmpUpstreamProtoTagControl(the upstream IGMP tag control attribute), the upstream IGMP TCI attribute defines a VLAN ID and P-bits to add to upstream IGMP messages.
INT gponOnuIgmpUpstreamProtoTagControl	1.3.6.1.4.1.17409.2.8.6.4.1.1.7	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Upstream IGMP tag control. This attribute controls the upstream IGMP TCI attribute. If this attribute is not pass-through, a possible extended VLAN tagging operation ME is ignored for upstream frames containing IGMP/MLD packets. Value Meaning 1 G.988 Value 0. Pass upstream IGMP/MLD traffic transparently, neither adding, stripping nor modifying tags that may be present. 2 G.988 Value 1. Add a VLAN tag (including P bits) to upstream IGMP/MLD traffic. The tag is specified by the upstream IGMP TCI attribute. 3 G.988 Value 2. Replace the entire TCI (VLAN ID plus P bits) on upstream IGMP/MLD traffic. The new tag is specified by the upstream IGMP/MLD TCI attribute. If the received IGMP/MLD traffic is untagged, an add operation is performed. 4 G.988 Value 3. Replace only the VLAN ID on upstream IGMP/MLD traffic, retaining the original DEI and P bits. The new VLAN ID is specified by the VLAN ID field of the upstream IGMP TCI attribute. If the received IGMP/MLD traffic is untagged, an add operation is performed, with DEI and P bits also taken from the upstream IGMP TCI attribute.
INT gponOnuIgmpUpstreamProtoRate	1.3.6.1.4.1.17409.2.8.6.4.1.1.8	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Upstream IGMP rate. This attribute limits the maximum rate of upstream IGMP traffic. Traffic in excess of this limit is silently discarded. The attribute value is specified in messages/second. The recommended default value 0 imposes no rate limit on this traffic.
INT gponOnuIgmpDynamicACL	1.3.6.1.4.1.17409.2.8.6.4.1.1.9	INTEGER	read-create	multicastACLIndex of gponOnuMulticastACLTable, refers to the list of multiple rules. G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table. This attribute is a list that specifies one or more multicast group address ranges. Groups defined in this list are multicast on the associated UNI(s) which need IGMP join, bandwidth measurement, and preview management. 0 for no DynamicACL
INT gponOnuIgmpStaticACL	1.3.6.1.4.1.17409.2.8.6.4.1.1.10	INTEGER	read-create	multicastACLIndex of gponOnuMulticastACLTable, refers to the list of multiple rules. G.988-201210: 9.3.27 Multicast operations profile, Attribute: Static access control list table. This attribute is a list that specifies one or more multicast group address ranges. Groups defined in this list are multicast on the associated UNI(s) unconditionally, that is, without the need for an IGMP join. The bandwidth of static multicast groups is not included in the current multicast bandwidth measurement maintained by the multicast subscriber monitor managed entity. If a join message is always expected, this table may be empty. Table entries have the same format as those in the dynamic access control list table. The preview fields are not meaningful. 0 for no StaticACL
INT gponOnuIgmpRobustness	1.3.6.1.4.1.17409.2.8.6.4.1.1.11	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Robustness. This attribute allows tuning for possible packet loss in the network. The recommended default value 0 causes the ONU to follow the IETF recommendation [IETF RFC 3376] to copy the robustness value from query messages originating further upstream.
INT gponOnuIgmpQueryInterval	1.3.6.1.4.1.17409.2.8.6.4.1.1.12	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Query interval. This attribute specifies the interval between general queries in seconds. The value 0 specifies that the ONU use its own default, which may or may not be the same as the recommended default of 125 seconds.
INT gponOnuIgmpQueryMaxResponseTime	1.3.6.1.4.1.17409.2.8.6.4.1.1.13	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Query max response time. This attribute is the max response time added by the proxy into general query messages directed to UNIs. It is expressed in tenths of seconds. The value 0 specifies that the ONU use its own default, which may or may not be the same as the recommended default of 100 (10 seconds).
INT gponOnuIgmpLastMemberQueryInterval	1.3.6.1.4.1.17409.2.8.6.4.1.1.14	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Last member query interval. This attribute specifies the max response time inserted into group-specific queries sent to UNIs in response to group leave messages. It is also the repetition rate of [robustness] transmissions of the query. It is specified in tenths of seconds, with a default of 10 (1 second).
INT gponOnuIgmpUnautherizedJoin	1.3.6.1.4.1.17409.2.8.6.4.1.1.15	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Unauthorized join request behaviour. This Boolean attribute specifies the ONU's behaviour when it receives an IGMP join request for a group that is not authorized in the dynamic address control list table, or an IGMPv3 membership report for groups, none of which are authorized in the dynamic ACL. The default value false specifies that the ONU silently discard the IGMP request; the value true specifies that the ONU forwards the request upstream. The ONU does not attempt to honour the request for the unauthorized group(s) in either case.
INT gponOnuIgmpDownstreamTCI	1.3.6.1.4.1.17409.2.8.6.4.1.1.16	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Downstream IGMP and multicast TCI(last two bytes). Under control of gponOnuIgmpDownstreamTagControl(first byte of Downstream IGMP and multicast TCI attribute), the downstream IGMP TCI attribute defines a VLAN ID and P-bits to add to both the IGMP/MLD and multicast frames.
INT gponOnuIgmpDownstreamTagControl	1.3.6.1.4.1.17409.2.8.6.4.1.1.17	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Downstream IGMP and multicast TCI(first byte). This attribute controls the downstream tagging of both the IGMP/MLD and multicast frames. If this attribute is not 1, a possible extended VLAN tagging operation ME is ignored for downstream IGMP/MLD and multicast frames. Value Meaning 1 G.988 Value 0 Pass the downstream IGMP/MLD and multicast traffic transparently, neither stripping nor modifying tags that may be present. 2 G.988 Value 1 Strip the outer VLAN tag (including P bits) from the downstream IGMP/MLD and multicast traffic. 3 G.988 Value 2 Add a tag onto the downstream IGMP/MLD and multicast traffic. The new tag is specified by gponOnuIgmpDownstreamTagControl. 4 G.988 Value 3 Replace the tag on the downstream IGMP/MLD and multicast traffic. The new tag is specified by gponOnuIgmpDownstreamTagControl. 5 G.988 Value 4 Replace only the VLAN ID on the downstream IGMP/MLD and multicast traffic, retaining the original DEI and P bits. The new VLAN ID is specified by gponOnuIgmpDownstreamTagControl.
INT gponOnuIgmpMaxRequestChannelNum	1.3.6.1.4.1.17409.2.8.6.4.1.1.18	INTEGER	read-create	G.988-201210: 9.3.28 Multicast subscriber config info, Attribute: Max simultaneous groups. This attribute specifies the maximum number of dynamic multicast groups that may be replicated to the client port at any one time. The recommended default value 0 specifies that no administrative limit is to be imposed.
INT gponOnuIgmpGlobalBW	1.3.6.1.4.1.17409.2.8.6.4.1.1.19	INTEGER	read-create	G.988-201210: 9.3.28 Multicast subscriber config info, Attribute: Max multicast bandwidth. This attribute specifies the maximum imputed dynamic bandwidth, in bytes per second, that may be delivered to the client port at any one time. The recommended default value 0 specifies that no administrative limit is to be imposed. G.988 'Bandwidth enforcement' attribute should be set to TRUE when the bandwidth value is not 0.
ROW gponOnuIgmpRowStatus	1.3.6.1.4.1.17409.2.8.6.4.1.1.20	RowStatus	read-create
gponOnuMulticastACLTable	1.3.6.1.4.1.17409.2.8.6.4.2		not-accessible	ONU \u7f01\u52ec\u6331\u93c9\u51ae\u6aba\u741b\ufffd
gponOnuMulticastACLEntry	1.3.6.1.4.1.17409.2.8.6.4.2.1		not-accessible
INT multicastACLIndex	1.3.6.1.4.1.17409.2.8.6.4.2.1.1	INTEGER	not-accessible	\u7f01\u52ec\u6331\u93c9\u51ae\u6aba\u95c6\u55d9\u50a8\u5bee\ufffd
INT multicastACLRuleIndex	1.3.6.1.4.1.17409.2.8.6.4.2.1.2	INTEGER	not-accessible	\u7f01\u52ec\u6331\u93c9\u51ae\u6aba\u7459\u52eb\u57af\u7ef1\u3220\u7d29
STR multicastACLRuleName	1.3.6.1.4.1.17409.2.8.6.4.2.1.3	DisplayString	read-create	\u7459\u52eb\u57af\u935a\u5d85\u74e7
INT vlanID	1.3.6.1.4.1.17409.2.8.6.4.2.1.4	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ VLAN ID (ANI) ] This field specifies the VLAN carrying the multicast group downstream. The value 0 designates an untagged downstream flow.
IP sourceIpAddress	1.3.6.1.4.1.17409.2.8.6.4.2.1.5	IpAddress	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Source IP address ] The value 0.0.0.0 specifies that the source IP address is to be ignored.
IP destinationIpAddressStart	1.3.6.1.4.1.17409.2.8.6.4.2.1.6	IpAddress	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table [ Destination IP address of the start of the multicast range ]
IP destinationIpAddressEnd	1.3.6.1.4.1.17409.2.8.6.4.2.1.7	IpAddress	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table [ Destination IP address of the end of the multicast range ]
INT previewLenAndAuthority	1.3.6.1.4.1.17409.2.8.6.4.2.1.8	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Preview length ] The maximum duration of each preview in seconds. The value 0 designates a group that is fully authorized by subscription and is not subject to preview restrictions. The remaining preview attributes in this row part are ignored.
INT previewRepeatTime	1.3.6.1.4.1.17409.2.8.6.4.2.1.9	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Preview repeat time ] The minimum time in seconds between two previews of a given multicast group.
INT previewResetTime	1.3.6.1.4.1.17409.2.8.6.4.2.1.10	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Preview reset time ] The time at which the ONU resets the preview repeat counter. The value assignments are as follows: 1..24: The integer clock time at which the ONU resets the preview repeat counter. For example the value 2 resets the counter at 2:00 AM. If the ONU does not have a time of day clock, the preview repeat counter is reset every 24 hours at an indeterminate time selected by the ONU. other values are reserved
INT previewCount	1.3.6.1.4.1.17409.2.8.6.4.2.1.11	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Preview repeat count ] The maximum number of times a given multicast group may be previewed. A value of zero allows an unlimited number of previews.
INT imputedGroupBandwidth	1.3.6.1.4.1.17409.2.8.6.4.2.1.12	INTEGER	read-create	G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Imputed group bandwidth ] Expressed in bytes per second, the imputed group bandwidth is used to decide whether or not to honour a join request in the presence of a max multicast bandwidth limit. The recommended default value 0 effectively allows this table entry to avoid max bandwidth limitations.
ROW multicastACLRuleStatus	1.3.6.1.4.1.17409.2.8.6.4.2.1.13	RowStatus	read-create	\u741b\u5c80\u59f8\u93ac\ufffd
gponIgmpOnuUniTable	1.3.6.1.4.1.17409.2.8.6.5		not-accessible	A list of gponIgmpOnuUniTable entries.
gponIgmpOnuUniEntry	1.3.6.1.4.1.17409.2.8.6.5.1		not-accessible	The gponIgmpOnuUniEntry Information
GPO gponUniDeviceIndex	1.3.6.1.4.1.17409.2.8.6.5.1.1	GponDeviceIndex	not-accessible	\u7481\u60e7\ue638\u7ef1\u3220\u7d29
GPO gponUniCardIndex	1.3.6.1.4.1.17409.2.8.6.5.1.2	GponCardIndex	not-accessible	\u93c9\u57ae\u5d31\u7ef1\u3220\u7d29
GPO gponUniPortIndex	1.3.6.1.4.1.17409.2.8.6.5.1.3	GponPortIndex	read-create	\u7ed4\ue21a\u5f5b\u7ef1\u3220\u7d29
INT gponUniIgmpProfileIndex	1.3.6.1.4.1.17409.2.8.6.5.1.4	INTEGER	read-create	gponOnuIgmpProfileTable\u7ef1\u3220\u7d29
ROW gponUniRowstatus	1.3.6.1.4.1.17409.2.8.6.5.1.5	RowStatus	read-create	\u741b\u5c80\u59f8\u93ac\ufffd
igmpOnuMulticastInfoTable	1.3.6.1.4.1.17409.2.8.6.6		not-accessible	A list of igmpOnuMulticastInfoTable entries. G.988-201210: 9.3.29 Multicast subscriber monitor, Attribute: IPv4 active group list table
igmpOnuMulticastInfoEntry	1.3.6.1.4.1.17409.2.8.6.6.1		not-accessible	The igmpOnuUniEntry Information
GPO onuMcInfoDeviceIndex	1.3.6.1.4.1.17409.2.8.6.6.1.1	GponDeviceIndex	not-accessible	\u7481\u60e7\ue638\u7ef1\u3220\u7d29
GPO onuMcInfoCardIndex	1.3.6.1.4.1.17409.2.8.6.6.1.2	GponCardIndex	not-accessible	\u93c9\u57ae\u5d31\u7ef1\u3220\u7d29
GPO onuMcInfoPortIndex	1.3.6.1.4.1.17409.2.8.6.6.1.3	GponPortIndex	read-create	\u7ed4\ue21a\u5f5b\u7ef1\u3220\u7d29
INT onuMcInfoIndex	1.3.6.1.4.1.17409.2.8.6.6.1.4	INTEGER	read-create	\u7f01\u52ec\u6331\u93c9\uff04\u6d30\u7ef1\u3220\u7d29
IP onuMcInfoSrcIp	1.3.6.1.4.1.17409.2.8.6.6.1.5	IpAddress	read-create	G.988-201210: 9.3.29 Multicast subscriber monitor, Attribute: IPv4 active group list table Source IP address, 0.0.0.0 if not used
IP onuMcInfoMcDstIp	1.3.6.1.4.1.17409.2.8.6.6.1.6	IpAddress	read-create	G.988-201210: 9.3.29 Multicast subscriber monitor, Attribute: IPv4 active group list table Multicast destination IP address
INT onuMcInfoMvlanVid	1.3.6.1.4.1.17409.2.8.6.6.1.7	INTEGER	read-create	G.988-201210: 9.3.29 Multicast subscriber monitor, Attribute: IPv4 active group list table VLAN ID, 0 if not used
IP onuMcInfoClientIp	1.3.6.1.4.1.17409.2.8.6.6.1.8	IpAddress	read-create	G.988-201210: 9.3.29 Multicast subscriber monitor, Attribute: IPv4 active group list table Client (set-top box) IP address, that is, the IP address of the device currently joined.
gponPerformanceStatisticObjects	1.3.6.1.4.1.17409.2.8.10
gponPerfStatsThresholdTable	1.3.6.1.4.1.17409.2.8.10.5		not-accessible
gponPerfStatsThresholdEntry	1.3.6.1.4.1.17409.2.8.10.5.1		not-accessible
GPO gponPerfStatsThresholdDeviceIndex	1.3.6.1.4.1.17409.2.8.10.5.1.1	GponDeviceIndex	not-accessible
GPO gponPerfStatsThresholdCardIndex	1.3.6.1.4.1.17409.2.8.10.5.1.2	GponCardIndex	not-accessible
GPO gponPerfStatsThresholdPortIndex	1.3.6.1.4.1.17409.2.8.10.5.1.3	GponPortIndex	not-accessible
GPO gponPerfStatsThresholdTypeIndex	1.3.6.1.4.1.17409.2.8.10.5.1.4	GponStatsThresholdType	not-accessible	\u95c2\u3129\u6aba\u7eeb\u8bf2\u7037\u951b\ufffd 1\u9286\u4e1fponStatsThresholdType\u6d93\u8861\ufffd50 Temperature\u9225\u6fc7\u4fef\u6434\ufe3d\u6902\u951b\u5c7d\u5d1f\u6d63\u5d86\u69f8\u93bd\u52ec\u76ac\u6434\ufe3c\u7d1d\u934b\u5fd5\u0429\u95b2\ufffd100\u951b\u5c7e\u762e\u6fe1\u509e\u68ec\u95c4\u612f\ue195\u7f03\ue1bb\u8d1f75\u93bd\u52ec\u76ac\u6434\ufe3c\u7d1d\u7039\u70ba\u6aaf\u93c4\ufffd25\u93bd\u52ec\u76ac\u6434\ufe3d\u6f75\u6769\u6d9c\ue511\u59e3\u65c7\u7ddd\u9352\u3085\u757e\u951b\ufffd 2\u9286\u4e1fponStatsThresholdType\u6d93\u8861\ufffd51 Voltage\u9225\u6fc7\u4fef\u6434\ufe3d\u6902\u951b\u5c7d\u5d1f\u6d63\u5d86\u69f8\u9225\u6e03enti-mv\u9225\u6fd3\u7d31 3\u9286\u4e1fponStatsThresholdType\u6d93\u8861\ufffd52 TXPower\u9225\u6fc6\u62f0\u9225\ufffd3 RXPower\u9225\u6fc7\u6902\u951b\u5c7d\u5d1f\u6d63\u5d86\u69f8centi-dBuV
C64 gponPerfStatsThresholdUpper	1.3.6.1.4.1.17409.2.8.10.5.1.5	Counter64	read-create	\u95c3\u581d\ufffd\u6d93\u5a47\u6aba
C64 gponPerfStatsThresholdLower	1.3.6.1.4.1.17409.2.8.10.5.1.6	Counter64	read-create	\u95c3\u581d\ufffd\u6d93\u5b2e\u6aba
ROW gponPerfStatsThresholdRowStatus	1.3.6.1.4.1.17409.2.8.10.5.1.7	RowStatus	read-create
curStatsGemPortTable	1.3.6.1.4.1.17409.2.8.10.6		not-accessible	Description.
curStatsGemPortEntry	1.3.6.1.4.1.17409.2.8.10.6.1		not-accessible	Description.
GPO curStatsGemPortDeviceIndex	1.3.6.1.4.1.17409.2.8.10.6.1.1	GponDeviceIndex	not-accessible	Description.
INT curStatsGemPortIndex	1.3.6.1.4.1.17409.2.8.10.6.1.2	INTEGER	not-accessible	Description.
C64 curStatsGemPortOutGemFrames	1.3.6.1.4.1.17409.2.8.10.6.1.3	Counter64	read-only	Description.
C64 curStatsGemPortInGemFrames	1.3.6.1.4.1.17409.2.8.10.6.1.4	Counter64	read-only	Description.
C64 curStatsGemPortOutBytes	1.3.6.1.4.1.17409.2.8.10.6.1.5	Counter64	read-only	Description.
C64 curStatsGemPortInBytes	1.3.6.1.4.1.17409.2.8.10.6.1.6	Counter64	read-only	Description.
INT curStatsGemPortStatusAndAction	1.3.6.1.4.1.17409.2.8.10.6.1.7	INTEGER	read-write	Description.
stats15GemPortTable	1.3.6.1.4.1.17409.2.8.10.7		not-accessible	Description.
stats15GemPortEntry	1.3.6.1.4.1.17409.2.8.10.7.1		not-accessible	Description.
GPO stats15GemPortDeviceIndex	1.3.6.1.4.1.17409.2.8.10.7.1.1	GponDeviceIndex	not-accessible	Description.
INT stats15GemPortIndex	1.3.6.1.4.1.17409.2.8.10.7.1.2	INTEGER	not-accessible	Description.
GPO stats15GemPortStatIndex	1.3.6.1.4.1.17409.2.8.10.7.1.3	GponStats15MinRecordType	not-accessible	Description.
C64 stats15GemPortOutGemFrames	1.3.6.1.4.1.17409.2.8.10.7.1.4	Counter64	read-only	Description.
C64 stats15GemPortInGemFrames	1.3.6.1.4.1.17409.2.8.10.7.1.5	Counter64	read-only	Description.
C64 stats15GemPortOutBytes	1.3.6.1.4.1.17409.2.8.10.7.1.6	Counter64	read-only	Description.
C64 stats15GemPortInBytes	1.3.6.1.4.1.17409.2.8.10.7.1.7	Counter64	read-only	Description.
INT stats15GemPortStatusAndAction	1.3.6.1.4.1.17409.2.8.10.7.1.8	INTEGER	read-write	Description.
T/F stats15GemPortValidityTag	1.3.6.1.4.1.17409.2.8.10.7.1.9	TruthValue	read-only	Description.
C32 stats15GemPortElapsedTime	1.3.6.1.4.1.17409.2.8.10.7.1.10	Counter32	read-only	Description.
DAT stats15GemPortEndTime	1.3.6.1.4.1.17409.2.8.10.7.1.11	DateAndTime	read-only	Description.
stats24GemPortTable	1.3.6.1.4.1.17409.2.8.10.8		not-accessible	Description.
stats24GemPortEntry	1.3.6.1.4.1.17409.2.8.10.8.1		not-accessible	Description.
GPO stats24GemPortDeviceIndex	1.3.6.1.4.1.17409.2.8.10.8.1.1	GponDeviceIndex	not-accessible	Description.
INT stats24GemPortIndex	1.3.6.1.4.1.17409.2.8.10.8.1.2	INTEGER	not-accessible	Description.
GPO stats24GemPortStatIndex	1.3.6.1.4.1.17409.2.8.10.8.1.3	GponStats24HourRecordType	not-accessible	Description.
C64 stats24GemPortOutGemFrames	1.3.6.1.4.1.17409.2.8.10.8.1.4	Counter64	read-only	Description.
C64 stats24GemPortInGemFrames	1.3.6.1.4.1.17409.2.8.10.8.1.5	Counter64	read-only	Description.
C64 stats24GemPortOutBytes	1.3.6.1.4.1.17409.2.8.10.8.1.6	Counter64	read-only	Description.
C64 stats24GemPortInBytes	1.3.6.1.4.1.17409.2.8.10.8.1.7	Counter64	read-only	Description.
INT stats24GemPortStatusAndAction	1.3.6.1.4.1.17409.2.8.10.8.1.8	INTEGER	read-write	Description.
T/F stats24GemPortValidityTag	1.3.6.1.4.1.17409.2.8.10.8.1.9	TruthValue	read-only	Description.
C32 stats24GemPortElapsedTime	1.3.6.1.4.1.17409.2.8.10.8.1.10	Counter32	read-only	Description.
DAT stats24GemPortEndTime	1.3.6.1.4.1.17409.2.8.10.8.1.11	DateAndTime	read-only	Description.
gponProfileObjects	1.3.6.1.4.1.17409.2.8.11
gponDbaProfileObjects	1.3.6.1.4.1.17409.2.8.11.1
gponDbaProfileInfoTable	1.3.6.1.4.1.17409.2.8.11.1.1		not-accessible	Description.
gponDbaProfileInfoEntry	1.3.6.1.4.1.17409.2.8.11.1.1.1		not-accessible	Description.
INT gponDbaProfileId	1.3.6.1.4.1.17409.2.8.11.1.1.1.1	INTEGER	not-accessible	Description.
STR gponDbaProfileName	1.3.6.1.4.1.17409.2.8.11.1.1.1.2	DisplayString	read-write	Description.
INT gponDbaProfileType	1.3.6.1.4.1.17409.2.8.11.1.1.1.3	INTEGER	read-write	Description.
INT gponDbaProfileFixRate	1.3.6.1.4.1.17409.2.8.11.1.1.1.4	INTEGER	read-write	Description.
INT gponDbaProfileAssureRate	1.3.6.1.4.1.17409.2.8.11.1.1.1.5	INTEGER	read-write	Description.
INT gponDbaProfileMaxRate	1.3.6.1.4.1.17409.2.8.11.1.1.1.6	INTEGER	read-write	Description.
INT gponDbaProfileBindNum	1.3.6.1.4.1.17409.2.8.11.1.1.1.7	INTEGER	read-only	Description.
ROW gponDbaProfileRowStatus	1.3.6.1.4.1.17409.2.8.11.1.1.1.8	RowStatus	read-create	Description.
gponLineProfileObjects	1.3.6.1.4.1.17409.2.8.11.2
gponLineProfileInfoTable	1.3.6.1.4.1.17409.2.8.11.2.1		not-accessible	Description.
gponLineProfileInfoEntry	1.3.6.1.4.1.17409.2.8.11.2.1.1		not-accessible	Description.
INT gponLineProfileId	1.3.6.1.4.1.17409.2.8.11.2.1.1.1	INTEGER	not-accessible	Description.
STR gponLineProfileName	1.3.6.1.4.1.17409.2.8.11.2.1.1.2	DisplayString	read-write	Description.
INT gponLineProfileUpstreamFECMode	1.3.6.1.4.1.17409.2.8.11.2.1.1.3	INTEGER	read-write	Description.
INT gponLineProfileMappingMode	1.3.6.1.4.1.17409.2.8.11.2.1.1.4	INTEGER	read-write	Description.
INT gponLineProfileTcontNum	1.3.6.1.4.1.17409.2.8.11.2.1.1.5	INTEGER	read-only	Description.
INT gponLineProfileGemNum	1.3.6.1.4.1.17409.2.8.11.2.1.1.6	INTEGER	read-only	Description.
INT gponLineProfileBindNum	1.3.6.1.4.1.17409.2.8.11.2.1.1.7	INTEGER	read-only	Description.
ROW gponLineProfileRowStatus	1.3.6.1.4.1.17409.2.8.11.2.1.1.8	RowStatus	read-create	Description.
gponLineProfileTcontTable	1.3.6.1.4.1.17409.2.8.11.2.2		not-accessible	Description.
gponLineProfileTcontEntry	1.3.6.1.4.1.17409.2.8.11.2.2.1		not-accessible	Description.
INT gponLineProfileTcontProfileIndex	1.3.6.1.4.1.17409.2.8.11.2.2.1.1	INTEGER	not-accessible	Description.
INT gponLineProfileTcontIndex	1.3.6.1.4.1.17409.2.8.11.2.2.1.2	INTEGER	not-accessible	Description.
INT gponLineProfileTcontDbaProfileId	1.3.6.1.4.1.17409.2.8.11.2.2.1.3	INTEGER	read-write	Description.
ROW gponLineProfileTcontRowStatus	1.3.6.1.4.1.17409.2.8.11.2.2.1.4	RowStatus	read-create	Description.
gponLineProfileGemTable	1.3.6.1.4.1.17409.2.8.11.2.3		not-accessible	Description.
gponLineProfileGemEntry	1.3.6.1.4.1.17409.2.8.11.2.3.1		not-accessible	Description.
INT gponLineProfileGemProfileIndex	1.3.6.1.4.1.17409.2.8.11.2.3.1.1	INTEGER	not-accessible	Description.
INT gponLineProfileGemIndex	1.3.6.1.4.1.17409.2.8.11.2.3.1.2	INTEGER	not-accessible	Description.
INT gponLineProfileGemEncrypt	1.3.6.1.4.1.17409.2.8.11.2.3.1.3	INTEGER	read-write	Description.
INT gponLineProfileGemTcontId	1.3.6.1.4.1.17409.2.8.11.2.3.1.4	INTEGER	read-write	Description.
INT gponLineProfileGemQueuePri	1.3.6.1.4.1.17409.2.8.11.2.3.1.5	INTEGER	read-write	Description.
INT gponLineProfileGemUpCar	1.3.6.1.4.1.17409.2.8.11.2.3.1.6	INTEGER	read-write	0:unconcern
INT gponLineProfileGemDownCar	1.3.6.1.4.1.17409.2.8.11.2.3.1.7	INTEGER	read-write	0:unconcern
INT gponLineProfileGemMapNum	1.3.6.1.4.1.17409.2.8.11.2.3.1.8	INTEGER	read-only	Description.
ROW gponLineProfileGemRowStatus	1.3.6.1.4.1.17409.2.8.11.2.3.1.9	RowStatus	read-create	Description.
gponLineProfileGemMapTable	1.3.6.1.4.1.17409.2.8.11.2.4		not-accessible	Description.
gponLineProfileGemMapEntry	1.3.6.1.4.1.17409.2.8.11.2.4.1		not-accessible	Description.
INT gponLineProfileGemMapProfileIndex	1.3.6.1.4.1.17409.2.8.11.2.4.1.1	INTEGER	not-accessible	Description.
INT gponLineProfileGemMapGemIndex	1.3.6.1.4.1.17409.2.8.11.2.4.1.2	INTEGER	not-accessible	Description.
INT gponLineProfileGemMapIndex	1.3.6.1.4.1.17409.2.8.11.2.4.1.3	INTEGER	not-accessible	Description.
INT gponLineProfileGemMapVlan	1.3.6.1.4.1.17409.2.8.11.2.4.1.4	INTEGER	read-create	Description.
INT gponLineProfileGemMapPriority	1.3.6.1.4.1.17409.2.8.11.2.4.1.5	INTEGER	read-create	Description.
INT gponLineProfileGemMapPortType	1.3.6.1.4.1.17409.2.8.11.2.4.1.6	INTEGER	read-write	Description.
INT gponLineProfileGemMapPortId	1.3.6.1.4.1.17409.2.8.11.2.4.1.7	INTEGER	read-create	Description.
ROW gponLineProfileGemMapRowStatus	1.3.6.1.4.1.17409.2.8.11.2.4.1.8	RowStatus	read-create	Description.
gponSrvProfileObjects	1.3.6.1.4.1.17409.2.8.11.3
gponSrvProfileInfoTable	1.3.6.1.4.1.17409.2.8.11.3.1		not-accessible	Description.
gponSrvProfileInfoEntry	1.3.6.1.4.1.17409.2.8.11.3.1.1		not-accessible	Description.
INT gponSrvProfileId	1.3.6.1.4.1.17409.2.8.11.3.1.1.1	INTEGER	not-accessible	Description.
STR gponSrvProfileName	1.3.6.1.4.1.17409.2.8.11.3.1.1.2	DisplayString	read-write	Description.
INT gponSrvProfileBindNum	1.3.6.1.4.1.17409.2.8.11.3.1.1.3	INTEGER	read-only	Description.
ROW gponSrvProfileRowStatus	1.3.6.1.4.1.17409.2.8.11.3.1.1.4	RowStatus	read-create	Description.
gponSrvProfileCfgTable	1.3.6.1.4.1.17409.2.8.11.3.2		not-accessible	Description.
gponSrvProfileCfgEntry	1.3.6.1.4.1.17409.2.8.11.3.2.1		not-accessible	Description.
INT gponSrvProfileIndex	1.3.6.1.4.1.17409.2.8.11.3.2.1.1	INTEGER	not-accessible	Description.
INT gponSrvProfileMacLearning	1.3.6.1.4.1.17409.2.8.11.3.2.1.2	INTEGER	read-write	Description.
INT gponSrvProfileMacAgeSeconds	1.3.6.1.4.1.17409.2.8.11.3.2.1.3	INTEGER	read-write	0:unconcern; -1:unlimited; 10-1000000:\u7039\u70ba\u6aaf\u9470\u4f78\u5bf2\u93c3\u5815\u68ff
INT gponSrvProfileLoopbackDetectCheck	1.3.6.1.4.1.17409.2.8.11.3.2.1.4	INTEGER	read-write	Description.
gponSrvProfilePortNumTable	1.3.6.1.4.1.17409.2.8.11.3.3		not-accessible	Description.
gponSrvProfilePortNumEntry	1.3.6.1.4.1.17409.2.8.11.3.3.1		not-accessible	Description.
INT gponSrvProfilePortNumProfileIndex	1.3.6.1.4.1.17409.2.8.11.3.3.1.1	INTEGER	not-accessible	Description.
INT gponSrvProfileEthNum	1.3.6.1.4.1.17409.2.8.11.3.3.1.2	INTEGER	read-write	-1:adaptive , 0-24:port num
INT gponSrvProfileCatvNum	1.3.6.1.4.1.17409.2.8.11.3.3.1.3	INTEGER	read-write	-1:adaptive , 0-2:port num
INT gponSrvProfileWlanNum	1.3.6.1.4.1.17409.2.8.11.3.3.1.4	INTEGER	read-write	-1:adaptive, 0-2:port num
INT gponSrvProfileVeipNum	1.3.6.1.4.1.17409.2.8.11.3.3.1.5	INTEGER	read-write	-1:adaptive , 0-8:port num
gponSrvProfileEthPortConfigTable	1.3.6.1.4.1.17409.2.8.11.3.4		not-accessible	Description.
gponSrvProfileEthPortConfigEntry	1.3.6.1.4.1.17409.2.8.11.3.4.1		not-accessible	Description.
INT gponSrvProfileEthPortProfileIndex	1.3.6.1.4.1.17409.2.8.11.3.4.1.1	INTEGER	not-accessible	Description.
INT gponSrvProfileEthPortIdIndex	1.3.6.1.4.1.17409.2.8.11.3.4.1.2	INTEGER	not-accessible	Description.
INT gponSrvProfileEthPortMacLimited	1.3.6.1.4.1.17409.2.8.11.3.4.1.3	INTEGER	read-write	-1:unconcern, 0:unlimited
INT gponSrvProfileEthPortMtu	1.3.6.1.4.1.17409.2.8.11.3.4.1.4	INTEGER	read-write	0:unconcern
INT gponSrvProfileEthPortFlowCtrl	1.3.6.1.4.1.17409.2.8.11.3.4.1.5	INTEGER	read-write	Description.
INT gponSrvProfileEthPortInTrafficProfileId	1.3.6.1.4.1.17409.2.8.11.3.4.1.6	INTEGER	read-write	0:unconcern
INT gponSrvProfileEthPortOutTrafficProfileId	1.3.6.1.4.1.17409.2.8.11.3.4.1.7	INTEGER	read-write	0:unconcern
gponSrvProfilePortVlanObjects	1.3.6.1.4.1.17409.2.8.11.3.5
gponSrvProfilePortVlanCfgTable	1.3.6.1.4.1.17409.2.8.11.3.5.1		not-accessible	Description.
gponSrvProfilePortVlanCfgEntry	1.3.6.1.4.1.17409.2.8.11.3.5.1.1		not-accessible	Description.
INT gponSrvProfilePortVlanProfileIndex	1.3.6.1.4.1.17409.2.8.11.3.5.1.1.1	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanPortTypeIndex	1.3.6.1.4.1.17409.2.8.11.3.5.1.1.2	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanPortIdIndex	1.3.6.1.4.1.17409.2.8.11.3.5.1.1.3	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanPvid	1.3.6.1.4.1.17409.2.8.11.3.5.1.1.4	INTEGER	read-write	0:unconcern
INT gponSrvProfilePortVlanPvidPri	1.3.6.1.4.1.17409.2.8.11.3.5.1.1.5	INTEGER	read-write	Description.
INT gponSrvProfilePortVlanMode	1.3.6.1.4.1.17409.2.8.11.3.5.1.1.6	INTEGER	read-write	Description.
gponSrvProfilePortVlanTranslationTable	1.3.6.1.4.1.17409.2.8.11.3.5.2		not-accessible	Description.
gponSrvProfilePortVlanTranslationEntry	1.3.6.1.4.1.17409.2.8.11.3.5.2.1		not-accessible	Description.
INT gponSrvProfilePortVlanTransProfileIndex	1.3.6.1.4.1.17409.2.8.11.3.5.2.1.1	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanTransPortTypeIndex	1.3.6.1.4.1.17409.2.8.11.3.5.2.1.2	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanTransPortIdIndex	1.3.6.1.4.1.17409.2.8.11.3.5.2.1.3	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanTransVlanIndex	1.3.6.1.4.1.17409.2.8.11.3.5.2.1.4	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanTransNewVlan	1.3.6.1.4.1.17409.2.8.11.3.5.2.1.5	INTEGER	read-create	Description.
ROW gponSrvProfilePortVlanTransRowStatus	1.3.6.1.4.1.17409.2.8.11.3.5.2.1.6	RowStatus	read-create	Description.
gponSrvProfilePortVlanAggregationTable	1.3.6.1.4.1.17409.2.8.11.3.5.3		not-accessible	Description.
gponSrvProfilePortVlanAggregationEntry	1.3.6.1.4.1.17409.2.8.11.3.5.3.1		not-accessible	Description.
INT gponSrvProfilePortVlanAggrProfileIndex	1.3.6.1.4.1.17409.2.8.11.3.5.3.1.1	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanAggrPortTypeIndex	1.3.6.1.4.1.17409.2.8.11.3.5.3.1.2	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanAggrPortIdIndex	1.3.6.1.4.1.17409.2.8.11.3.5.3.1.3	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanAggrVlanIndex	1.3.6.1.4.1.17409.2.8.11.3.5.3.1.4	INTEGER	not-accessible	Description.
OCT gponSrvProfilePortVlanAggrVlanList	1.3.6.1.4.1.17409.2.8.11.3.5.3.1.5	OCTET STRING	read-create	max num of vlan is 8, two bytes is one vlan.
ROW gponSrvProfilePortVlanAggrRowStatus	1.3.6.1.4.1.17409.2.8.11.3.5.3.1.6	RowStatus	read-create	Description.
gponSrvProfilePortVlanTrunkTable	1.3.6.1.4.1.17409.2.8.11.3.5.4		not-accessible	Description.
gponSrvProfilePortVlanTrunkEntry	1.3.6.1.4.1.17409.2.8.11.3.5.4.1		not-accessible	Description.
INT gponSrvProfilePortVlanTrunkProfileIndex	1.3.6.1.4.1.17409.2.8.11.3.5.4.1.1	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanTrunkPortTypeIndex	1.3.6.1.4.1.17409.2.8.11.3.5.4.1.2	INTEGER	not-accessible	Description.
INT gponSrvProfilePortVlanTrunkPortIdIndex	1.3.6.1.4.1.17409.2.8.11.3.5.4.1.3	INTEGER	not-accessible	Description.
OCT gponSrvProfilePortVlanTrunkVlanList	1.3.6.1.4.1.17409.2.8.11.3.5.4.1.4	OCTET STRING	read-create	max num of vlan is 8, two bytes is one vlan.
ROW gponSrvProfilePortVlanTrunkRowStatus	1.3.6.1.4.1.17409.2.8.11.3.5.4.1.5	RowStatus	read-create	Description.
gponTrafficProfileObjects	1.3.6.1.4.1.17409.2.8.11.4
gponTrafficProfileInfoTable	1.3.6.1.4.1.17409.2.8.11.4.1		not-accessible	Description.
gponTrafficProfileInfoEntry	1.3.6.1.4.1.17409.2.8.11.4.1.1		not-accessible	cir/pir/cbs/pbs must config at the same time.
INT gponTrafficProfileId	1.3.6.1.4.1.17409.2.8.11.4.1.1.1	INTEGER	not-accessible	Description.
STR gponTrafficProfileName	1.3.6.1.4.1.17409.2.8.11.4.1.1.2	DisplayString	read-write	Description.
INT gponTrafficProfileCfgCir	1.3.6.1.4.1.17409.2.8.11.4.1.1.3	INTEGER	read-write	Description.
INT gponTrafficProfileCfgPir	1.3.6.1.4.1.17409.2.8.11.4.1.1.4	INTEGER	read-write	Description.
INT gponTrafficProfileCfgCbs	1.3.6.1.4.1.17409.2.8.11.4.1.1.5	INTEGER	read-write	Description.
INT gponTrafficProfileCfgPbs	1.3.6.1.4.1.17409.2.8.11.4.1.1.6	INTEGER	read-write	Description.
INT gponTrafficProfileCfgPriority	1.3.6.1.4.1.17409.2.8.11.4.1.1.7	INTEGER	read-write	Description.
INT gponTrafficProfileBindNum	1.3.6.1.4.1.17409.2.8.11.4.1.1.8	INTEGER	read-only	Description.
ROW gponTrafficProfileRowStatus	1.3.6.1.4.1.17409.2.8.11.4.1.1.9	RowStatus	read-create	Description.

RFC description

Manages fiber-to-the-x GPON devices, OLTs, and ONUs with alarm and trap reporting for optical access networks.

Start monitoring GPON OLT/ONU devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NSCRTV-FTTX-GPON-MIB

What Is NSCRTV-FTTX-GPON-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description