NSCRTV-HFCEMS-ALARMS-MIB

MIB Reference — IPNetwork Monitor

All MIBsNSCRTV-HFCEMS-ALARMS-MIB

Category: CATV and HFC

Description:

Manages HFC plant alarm thresholds, active alarm tables, and event history for NSCRTV cable TV EMS systems.

Imported Objects

From NSCRTV-HFCEMS-COMMON-MIB

commonNELogicalIDOBJECT-TYPE
commonPhysAddressOBJECT-TYPE

From NSCRTV-ROOT

alarmsIdentOBJECT-IDENTITY
nscrtvHFCemsTreeOBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1213-MIB

DisplayString

What Is NSCRTV-HFCEMS-ALARMS-MIB?

NSCRTV-HFCEMS-ALARMS-MIB is a vendor-specific MIB from NSCRTV for its HFC (Hybrid Fiber-Coax) cable television element management system, modeling plant alarm generation and history for cable TV headend and outside-plant equipment. It exposes alarmLogTable, a 16-entry rolling alarm history table indexed by alarmLogIndex, where each alarmLogInformation entry packs a timestamp, alarm severity/enumeration (NOMINAL, HIHI, HI, LO, LOLO, or discrete major/minor), the reporting network element's status, and object identifier/value data for the specific alarm condition. It also defines alarmLogNumberOfEntries and alarmLogLastIndex scalars for tracking table fill state, and an hfcAlarmEvent TRAP-TYPE that carries the physical address, logical NE ID, alarm log entry, and optional free-text alarm description at the moment an alarm fires. It depends on companion MIBs NSCRTV-HFCEMS-COMMON-MIB (for commonPhysAddress/commonNELogicalID) and NSCRTV-ROOT for its OID tree placement, and is deployed within NSCRTV cable TV EMS deployments monitoring HFC plant health. Cable operators load the NSCRTV-HFCEMS-ALARMS-MIB MIB into their EMS or NMS to receive and decode real-time HFC plant alarm traps.

IPNetwork Monitor allows you to monitor SNMP objects defined in NSCRTV-HFCEMS-ALARMS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

  • active/historical alarm log entries and severity levels
  • alarm count and last-index tracking
  • network element physical/logical address on alarm
  • real-time HFC plant alarm event traps

Supported Devices

  • NSCRTV HFC cable TV element management system (EMS) equipment

Monitoring Examples

An operator subscribes to hfcAlarmEvent traps and cross-references the alarmLogInformation payload against alarmLogTable (indexed by alarmLogIndex) to determine which network element and alarm severity triggered the event; a burst of HIHI or discrete-major alarms tied to the same commonNELogicalID would indicate a developing HFC plant fault requiring field dispatch.

OIDs
OID symbolicOID numericTypeAccessDescription
NTF hfcAlarmEvent1.3.6.1.4.1.17409.1.0.1����⵽�澯�¼�ʱ���ʹ�������Ϣ���Ƿ��alarmText�������ݸ澯����������ȷ ����ijЩ�����ĸ澯ֻ��Ҫ��ǰ����������
INT alarmLogNumberOfEntries1.3.6.1.4.1.17409.1.2.1INTEGERread-only�澯��¼���еļ�¼������
INT alarmLogLastIndex1.3.6.1.4.1.17409.1.2.2INTEGERread-only���һ���澯��¼������ֵ��
alarmLogTable1.3.6.1.4.1.17409.1.2.3not-accessible�澯��¼��������֧��16����¼��ÿ���ڱ��еǼ�һ���µļ�¼ʱ�������������� Ӧ������Ӧ������߷���������Ϣ��
alarmLogEntry1.3.6.1.4.1.17409.1.2.3.1not-accessible�澯��¼��Ŀ��
INT alarmLogIndex1.3.6.1.4.1.17409.1.2.3.1.1INTEGERread-only����Ψһ��ʶ�澯��¼���е�һ����¼������ֵ��1��ʼÿ�������¼�¼ʱ��1�� ֱ��32767����һ����¼����ֵ���´�1��ʼ�����������ɸ��ݴ洢����ѡ��ɾ���� �����Щ��¼������ʵ��ϸ���ڴ˲����涨��
OCT alarmLogInformation1.3.6.1.4.1.17409.1.2.3.1.2OCTET STRINGread-only�澯��¼��Ϣ�����ֽڴ����������£� �ֽ� 1��4: �澯����ʱ��(POSIX��ʽ�������Ч�ֽ���ǰ) �ֽ� 5: �澯����(ö�٣��������) �ֽ� 6: �澯������commonNeStatus��ֵ �ֽ� 7��m: �澯�����Ķ����ʶ��(�����������ASN.1��) �ֽ� n��z: �澯����ֵ (�����������ASN.1��) �澯ö�����ͣ� 1 NOMINAL 2 HIHI 3 HI 4 LO 5 LOLO 6 Discrete Major 7 Discrete Minor
STR alarmText1.3.6.1.4.1.17409.1.2.4DisplayStringnot-accessible�˶��������Ҫ��������Ϣ�а���һ���ı���Ϣ�ֶε�Ӧ������Ӧʵ�ֵġ� ���ֶ��а������ı�����ȡ���ڸ澯��������Ķ��壬����Dz�ȷ���ģ����� �涨�˶����ܷ��ʡ�

RFC description

Cable TV HFC element management system alarm logging and tracking for network events and conditions.

Start monitoring NSCRTV HFC cable TV element management system equipment (alarm history) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NSCRTV-HFCEMS-ALARMS-MIB