NSCRTV-FTTX-GPON-MIB :: onuOMCCVersion

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NSCRTV-FTTX-GPON-MIB › onuOMCCVersion

onuOMCCVersion

Module: NSCRTV-FTTX-GPON-MIB

OID (symbolic): NSCRTV-FTTX-GPON-MIB::onuOMCCVersion

OID (numeric): 1.3.6.1.4.1.17409.2.8.4.5.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: 0x80 ITU-T G.984.4 (06/04) NOTE \u9225\ufffdFor historical reasons, this code point may also appear in ONUs that support later versions of [ITU-T G.984.4]. 0x81 ITU-T G.984.4 2004 Amd.1 (06/05) 0x82 ITU-T G.984.4 2004 Amd.2 (03/06) 0x83 ITU-T G.984.4 2004 Amd.3 (12/06) 0x84 ITU-T G.984.4 2008 (02/08) 0x85 ITU-T G.984.4 2008 Amd.1 (06/09) 0x86 ITU-T G.984.4 2008 Amd.2 (2009). Baseline message set only, without the extended message set option 0x96 ITU-T G.984.4 2008 Amd.2 (2009). Extended message set option, in addition to the baseline message set.54 Rec. ITU-T G.988 (10/2012) 0xA0 ITU-T G.988 (2010). Baseline message set only, without the extended message set option 0xA1 ITU-T G.988 Amd.1 (2011). Baseline message set only 0xA2 ITU-T G.988 Amd.2 (2012). Baseline message set only 0xA3 ITU-T G.988 (2012). Baseline message set only 0xB0 ITU-T G.988 (2010). Baseline and extended message set 0xB1 ITU-T G.988 Amd.1 (2011). Baseline and extended message set 0xB2 ITU-T G.988 Amd.2 (2012). Baseline and extended message set 0xB3 ITU-T G.988 (2012). Baseline and extended message set

What is onuOMCCVersion?

This reports which version of the ITU-T G.984.4 OMCC (ONU Management and Control Channel) protocol the ONU supports, encoded as a code point (e.g. 0x80 for the original G.984.4, later values for subsequent amendments). Admins use it to confirm OMCI/OMCC protocol compatibility between the OLT and a given ONU model before relying on advanced management features. For example, an older ONU reporting an early code point here may not support newer OMCI managed entities the OLT tries to use.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17409.2.8.4.5.1.2
snmpwalk -v2c -c public <target> NSCRTV-FTTX-GPON-MIB::onuOMCCVersion

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.17409.2.8.4.5.1.2.1
snmpget -v2c -c public <target> NSCRTV-FTTX-GPON-MIB::onuOMCCVersion.1

Start monitoring GPON OLT/ONU devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NSCRTV-FTTX-GPON-MIB::onuOMCCVersion OID value, configure state conditions and alerts, and monitor any GPON OLT/ONU devices from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.17409nscrtvRootNSCRTV-EPONEOC-EPON-MIB
1.3.6.1.4.1.17409.2nscrtvEponEocTreeNSCRTV-EPONEOC-EPON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.17409.2.8gponTreeNSCRTV-FTTX-GPON-MIB
1.3.6.1.4.1.17409.2.8.4gponOnuObjectsNSCRTV-FTTX-GPON-MIB
1.3.6.1.4.1.17409.2.8.4.5onuCapabilityTableNSCRTV-FTTX-GPON-MIB
1.3.6.1.4.1.17409.2.8.4.5.1onuCapabilityEntryNSCRTV-FTTX-GPON-MIB
1.3.6.1.4.1.17409.2.8.4.5.1.2onuOMCCVersionNSCRTV-FTTX-GPON-MIB