All MIBs › OMNI-gx2Dm1000-MIB
Category: CATV and HFC
Description: Manages the Cisco/Scientific Atlanta GX2 Dm1000 downstream optical transmitter module in HFC cable plants.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is OMNI-gx2Dm1000-MIB?
This is a vendor-specific MIB, associated with Cisco/Scientific Atlanta OMNI-branded HFC (hybrid fiber-coax) headend equipment, covering the GX2 Dm1000 downstream optical transmitter module used in cable television plant headends to convert electrical RF signals to optical signals for fiber transport. It would expose configuration and status objects for the optical transmitter module, such as optical output power and operating mode, though no sample objects were provided to confirm exact object names. Its expected monitoring role is hardware status of the optical transmission path: operators would use it to track optical output level, module operational/alarm status, and possibly temperature, since a degraded or failed optical transmitter directly affects downstream signal quality for all subscribers on that fiber segment. No specific dependency on other MIBs can be confirmed from the available data, though it likely fits within a broader Scientific Atlanta/Cisco headend equipment MIB hierarchy. It is deployed in cable operator headends and hub sites as part of the HFC plant's fiber-optic downstream transmission equipment. Network engineers evaluating or troubleshooting this functionality can download the OMNI-gx2Dm1000-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in OMNI-gx2Dm1000-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- General Instrument OmniStar GX2 HFC headend/optical node (GX2 Dm1000 downstream optical transmitter module)
Monitoring Examples
No sample objects were provided for this MIB, so specific object names cannot be cited; a realistic scenario would involve polling the module's optical output power and alarm/status objects to detect a transmitter degrading below its rated output level, which would manifest as poor picture/data quality for subscribers downstream on that fiber node, but this cannot be grounded in confirmed object names from the source data.
What Can Be Monitored
- optical output power
- module operational/alarm status
This MIB depends on
Related MIBs
Imported Objects
From GX2HFC-MIB
| gx2Dm1000 | OBJECT-IDENTITY |
From NLS-BBNIDENT-MIB
| gi | OBJECT-IDENTITY |
| motproxies | OBJECT-IDENTITY |
From NLSBBN-TRAPS-MIB
| trapChangedObjectId | OBJECT-TYPE |
| trapChangedValueDisplayString | OBJECT-TYPE |
| trapChangedValueInteger | OBJECT-TYPE |
| trapIdentifier | OBJECT-TYPE |
| trapNETrapLastTrapTimeStamp | OBJECT-TYPE |
| trapNetworkElemAdminState | OBJECT-TYPE |
| trapNetworkElemAlarmStatus | OBJECT-TYPE |
| trapNetworkElemAvailStatus | OBJECT-TYPE |
| trapNetworkElemModelNumber | OBJECT-TYPE |
| trapNetworkElemOperState | OBJECT-TYPE |
| trapNetworkElemSerialNum | OBJECT-TYPE |
| trapPerceivedSeverity | OBJECT-TYPE |
| trapText | OBJECT-TYPE |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| TimeTicks |
From RFC1213-MIB
| DisplayString | |
| sysUpTime |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF trapDM1000ConfigChangeInteger | 1.3.6.1.4.1.1166.6.1.2.28.0.1 | This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate' | ||
| NTF trapDM1000ConfigChangeDisplayString | 1.3.6.1.4.1.1166.6.1.2.28.0.2 | This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate' | ||
| NTF trapDM1000fanCurrentAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.3 | This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| NTF trapDM1000ModuleTempAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.4 | This trap is issued when the Module Temperature parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| NTF trapDM1000omiOffsetAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.5 | This trap is issued when the OMI Offset goes out of range. | ||
| NTF trapDM1000tecCurrentAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.6 | This trap is issued when the TEC Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| NTF trapDM1000LaserCurrentAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.7 | This trap is issued when the Laser Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| NTF trapDM1000LaserTempAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.8 | This trap is issued when the Laser Temp parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| NTF trapDM1000LaserPowerAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.9 | This trap is issued when the Laser Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| NTF trapDM1000FlashAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.10 | This trap is issued when the Laser Modules detects an error during Flash memory operations. | ||
| NTF trapDM1000BankBootAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.11 | This trap is issued when the Laser Modules detects an error while booting from bank 0 or bank 1. | ||
| NTF trapDM1000AlarmDataCRCAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.12 | This trap is issued when the Alarm Data CRC is incorrect. | ||
| NTF trapDM1000FactoryDataCRCAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.13 | This trap is issued when the Factory Data CRC is incorrect. | ||
| NTF trapDM1000CalDataCRCAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.14 | This trap is issued when the Cal Data CRC is incorrect. | ||
| NTF trapDM1000ResetFacDefault | 1.3.6.1.4.1.1166.6.1.2.28.0.15 | This trap is issued when the DM1000 resets to factory defaults | ||
| NTF trapDM1000UserRFOffAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.16 | This trap is issued when the the User RF is turned off. | ||
| NTF trapDM1000UserOpticalOffAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.17 | This trap is issued when the User Optical Power is turned off. | ||
| NTF trapDM1000UserSBSOffAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.18 | This trap is issued when the User SBS is turned off. | ||
| NTF trapDM1000RFInputAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.19 | This trap is issued when the Laser Modules RF input parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| NTF trapDM1000RFOverloadAlarm | 1.3.6.1.4.1.1166.6.1.2.28.0.20 | This trap is issued when the Laser Modules RF overload parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| gx2Dm1000Descriptor | 1.3.6.1.4.1.1166.6.1.2.28.1 | |||
| gx2Dm1000AnalogTable | 1.3.6.1.4.1.1166.6.1.2.28.2 | not-accessible | This table contains gx2Dm1000 specific parameters with nominal and current values. | |
| gx2Dm1000AnalogEntry | 1.3.6.1.4.1.1166.6.1.2.28.2.1 | not-accessible | This list contains the analog parameters and descriptions. | |
| INT gx2Dm1000AnalogTableIndex | 1.3.6.1.4.1.1166.6.1.2.28.2.1.1 | INTEGER | read-only | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| STR dm1000labelOffsetNomMonitor | 1.3.6.1.4.1.1166.6.1.2.28.2.1.2 | DisplayString | read-only | The value of this object provides the label of the Offset Monitor Analog parameter. |
| STR dm1000uomOffsetNomMonitor | 1.3.6.1.4.1.1166.6.1.2.28.2.1.3 | DisplayString | read-only | The value of this object provides the Unit of Measure of the Offset Monitor Analog parameter. |
| FLO dm1000majorHighOffsetNomMonitor | 1.3.6.1.4.1.1166.6.1.2.28.2.1.4 | Float | read-only | The value of this object provides the Major High alarm value of the Offset Monitor Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000majorLowOffsetNomMonitor | 1.3.6.1.4.1.1166.6.1.2.28.2.1.5 | Float | read-only | The value of this object provides the Major Low alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorHighOffsetNomMonitor | 1.3.6.1.4.1.1166.6.1.2.28.2.1.6 | Float | read-only | The value of this object provides the Minor High alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorLowOffsetNomMonitor | 1.3.6.1.4.1.1166.6.1.2.28.2.1.7 | Float | read-only | The value of this object provides the Minor Low alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000currentValueOffsetNomMonitor | 1.3.6.1.4.1.1166.6.1.2.28.2.1.8 | Float | read-only | The value of this object provides the Current value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000stateFlagOffsetNomMonitor | 1.3.6.1.4.1.1166.6.1.2.28.2.1.9 | INTEGER | read-only | The value of this object provides the state of the Offset Monitor Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| FLO dm1000minValueOffsetNomMonitor | 1.3.6.1.4.1.1166.6.1.2.28.2.1.10 | Float | read-only | The value of this object provides the minimum value the Offset Monitor Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| FLO dm1000maxValueOffsetNomMonitor | 1.3.6.1.4.1.1166.6.1.2.28.2.1.11 | Float | read-only | The value of this object provides the maximum value the Offset Monitor Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000alarmStateOffsetNomMonitor | 1.3.6.1.4.1.1166.6.1.2.28.2.1.12 | INTEGER | read-only | The value of this object provides the curent alarm state of the Offset Monitor Power Analog parameter. |
| STR dm1000labelOffsetNomCnt | 1.3.6.1.4.1.1166.6.1.2.28.2.1.13 | DisplayString | read-only | The value of this object provides the label of the Offset Control Analog parameter. |
| STR dm1000uomOffsetNomCnt | 1.3.6.1.4.1.1166.6.1.2.28.2.1.14 | DisplayString | read-only | The value of this object provides the Unit of Measure of the Offset Control Analog parameter.. |
| FLO dm1000majorHighOffsetNomCnt | 1.3.6.1.4.1.1166.6.1.2.28.2.1.15 | Float | read-only | The value of this object provides the Major High alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000majorLowOffsetNomCnt | 1.3.6.1.4.1.1166.6.1.2.28.2.1.16 | Float | read-only | The value of this object provides the Major Low alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorHighOffsetNomCnt | 1.3.6.1.4.1.1166.6.1.2.28.2.1.17 | Float | read-only | The value of this object provides the Minor High alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorLowOffsetNomCnt | 1.3.6.1.4.1.1166.6.1.2.28.2.1.18 | Float | read-only | The value of this object provides the Minor Low alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000currentValueOffsetNomCnt | 1.3.6.1.4.1.1166.6.1.2.28.2.1.19 | Float | read-write | The value of this object provides the Current value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000stateFlagOffsetNomCnt | 1.3.6.1.4.1.1166.6.1.2.28.2.1.20 | INTEGER | read-only | The value of this object provides the state of the Offset Control Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| FLO dm1000minValueOffsetNomCnt | 1.3.6.1.4.1.1166.6.1.2.28.2.1.21 | Float | read-only | The value of this object provides the minimum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| FLO dm1000maxValueOffsetNomCnt | 1.3.6.1.4.1.1166.6.1.2.28.2.1.22 | Float | read-only | The value of this object provides the maximum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000alarmStateOffsetNomCnt | 1.3.6.1.4.1.1166.6.1.2.28.2.1.23 | INTEGER | read-only | The value of this object provides the curent alarm state of the Offset Control Analog parameter. |
| STR dm1000labelAttenSetting | 1.3.6.1.4.1.1166.6.1.2.28.2.1.24 | DisplayString | read-only | The value of this object provides the label of the Attenuator Setting Current Analog parameter. |
| STR dm1000uomAttenSetting | 1.3.6.1.4.1.1166.6.1.2.28.2.1.25 | DisplayString | read-only | The value of this object provides the Unit of Measure of the Attenuator Setting Analog parameter. |
| FLO dm1000majorHighAttenSetting | 1.3.6.1.4.1.1166.6.1.2.28.2.1.26 | Float | read-only | The value of this object provides the Major High alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000majorLowAttenSetting | 1.3.6.1.4.1.1166.6.1.2.28.2.1.27 | Float | read-only | The value of this object provides the Major Low alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorHighAttenSetting | 1.3.6.1.4.1.1166.6.1.2.28.2.1.28 | Float | read-only | The value of this object provides the Minor High alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorLowAttenSetting | 1.3.6.1.4.1.1166.6.1.2.28.2.1.29 | Float | read-only | The value of this object provides the Minor Low alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000currentValueAttenSetting | 1.3.6.1.4.1.1166.6.1.2.28.2.1.30 | Float | read-write | The value of this object provides the Current value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000stateFlagAttenSetting | 1.3.6.1.4.1.1166.6.1.2.28.2.1.31 | INTEGER | read-only | The value of this object provides the state of the Attenuator Setting Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| FLO dm1000minValueAttenSetting | 1.3.6.1.4.1.1166.6.1.2.28.2.1.32 | Float | read-only | The value of this object provides the minimum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| FLO dm1000maxValueAttenSetting | 1.3.6.1.4.1.1166.6.1.2.28.2.1.33 | Float | read-only | The value of this object provides the maximum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000alarmStateAttenSetting | 1.3.6.1.4.1.1166.6.1.2.28.2.1.34 | INTEGER | read-only | The value of this object provides the curent alarm state of the Attenuator Setting Analog parameter. |
| STR dm1000labelLaserPower | 1.3.6.1.4.1.1166.6.1.2.28.2.1.35 | DisplayString | read-only | The value of this object provides the label of the Laser Optical Power Analog parameter. |
| STR dm1000uomLaserPower | 1.3.6.1.4.1.1166.6.1.2.28.2.1.36 | DisplayString | read-only | The value of this object provides the Unit of Measure of the Laser Optical Power Analog parameter. |
| FLO dm1000majorHighLaserPower | 1.3.6.1.4.1.1166.6.1.2.28.2.1.37 | Float | read-only | The value of this object provides the Major High alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000majorLowLaserPower | 1.3.6.1.4.1.1166.6.1.2.28.2.1.38 | Float | read-only | The value of this object provides the Major Low alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorHighLaserPower | 1.3.6.1.4.1.1166.6.1.2.28.2.1.39 | Float | read-only | The value of this object provides the Minor High alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorLowLaserPower | 1.3.6.1.4.1.1166.6.1.2.28.2.1.40 | Float | read-only | The value of this object provides the Minor Low alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000currentValueLaserPower | 1.3.6.1.4.1.1166.6.1.2.28.2.1.41 | Float | read-only | The value of this object provides the Current value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000stateFlagLaserPower | 1.3.6.1.4.1.1166.6.1.2.28.2.1.42 | INTEGER | read-only | The value of this object provides the state of the Laser Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| FLO dm1000minValueLaserPower | 1.3.6.1.4.1.1166.6.1.2.28.2.1.43 | Float | read-only | The value of this object provides the minimum value the Laser Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| FLO dm1000maxValueLaserPower | 1.3.6.1.4.1.1166.6.1.2.28.2.1.44 | Float | read-only | The value of this object provides the maximum value the Laser Optical Power Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000alarmStateLaserPower | 1.3.6.1.4.1.1166.6.1.2.28.2.1.45 | INTEGER | read-only | The value of this object provides the curent alarm state of the Laser Optical Power Analog parameter. |
| STR dm1000labelLaserTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.46 | DisplayString | read-only | The value of this object provides the label of the Laser Temperature Analog parameter. |
| STR dm1000uomLaserTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.47 | DisplayString | read-only | The value of this object provides the Unit of Measure of the Laser Temperature Analog parameter.. |
| FLO dm1000majorHighLaserTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.48 | Float | read-only | The value of this object provides the Major High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000majorLowLaserTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.49 | Float | read-only | The value of this object provides the Major Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorHighLaserTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.50 | Float | read-only | The value of this object provides the Minor High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorLowLaserTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.51 | Float | read-only | The value of this object provides the Minor Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000currentValueLaserTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.52 | Float | read-only | The value of this object provides the Current value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000stateFlagLaserTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.53 | INTEGER | read-only | The value of this object provides the state of the Laser Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| FLO dm1000minValueLaserTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.54 | Float | read-only | The value of this object provides the minimum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| FLO dm1000maxValueLaserTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.55 | Float | read-only | The value of this object provides the maximum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000alarmStateLaserTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.56 | INTEGER | read-only | The value of this object provides the curent alarm state of the Laser Temperature Analog parameter. |
| STR dm1000labelLaserCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.57 | DisplayString | read-only | The value of this object provides the label of the Laser Bias Current Analog parameter. |
| STR dm1000uomLaserCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.58 | DisplayString | read-only | The value of this object provides the Unit of Measure of the Laser Bias Current Analog parameter. |
| FLO dm1000majorHighLaserCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.59 | Float | read-only | The value of this object provides the Major High alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000majorLowLaserCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.60 | Float | read-only | The value of this object provides the Major Low alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorHighLaserCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.61 | Float | read-only | The value of this object provides the Minor High alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorLowLaserCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.62 | Float | read-only | The value of this object provides the Minor Low alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000currentValueLaserCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.63 | Float | read-only | The value of this object provides the Current value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000stateFlagLaserCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.64 | INTEGER | read-only | The value of this object provides the state of the Laser Bias Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| FLO dm1000minValueLaserCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.65 | Float | read-only | The value of this object provides the minimum value the Laser Bias Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| FLO dm1000maxValueLaserCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.66 | Float | read-only | The value of this object provides the maximum value the Laser Bias Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000alarmStateLaserCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.67 | INTEGER | read-only | The value of this object provides the curent alarm state of the Laser Bias Current Analog parameter. |
| STR dm1000labelTecCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.68 | DisplayString | read-only | The value of this object provides the label of the TEC Current Analog parameter. |
| STR dm1000uomTecCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.69 | DisplayString | read-only | The value of this object provides the Unit of Measure of the TEC Current Analog parameter. |
| FLO dm1000majorHighTecCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.70 | Float | read-only | The value of this object provides the Major High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000majorLowTecCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.71 | Float | read-only | The value of this object provides the Major Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorHighTecCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.72 | Float | read-only | The value of this object provides the Minor High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorLowTecCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.73 | Float | read-only | The value of this object provides the Minor Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000currentValueTecCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.74 | Float | read-only | The value of this object provides the Current value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000stateFlagTecCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.75 | INTEGER | read-only | The value of this object provides the state of the TEC Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| FLO dm1000minValueTecCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.76 | Float | read-only | The value of this object provides the minimum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| FLO dm1000maxValueTecCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.77 | Float | read-only | The value of this object provides the maximum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000alarmStateTecCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.78 | INTEGER | read-only | The value of this object provides the curent alarm state of the TEC Current Analog parameter. |
| STR dm1000labelModTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.79 | DisplayString | read-only | The value of this object provides the label of the Module Temperature Analog parameter. |
| STR dm1000uomModTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.80 | DisplayString | read-only | The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. |
| FLO dm1000majorHighModTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.81 | Float | read-only | The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000majorLowModTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.82 | Float | read-only | The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorHighModTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.83 | Float | read-only | The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorLowModTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.84 | Float | read-only | The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000currentValueModTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.85 | Float | read-only | The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000stateFlagModTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.86 | INTEGER | read-only | The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| FLO dm1000minValueModTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.87 | Float | read-only | The value of this object provides the minimum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| FLO dm1000maxValueModTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.88 | Float | read-only | The value of this object provides the maximum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000alarmStateModTemp | 1.3.6.1.4.1.1166.6.1.2.28.2.1.89 | INTEGER | read-only | The value of this object provides the curent alarm state of the Module Temperature Analog parameter. |
| STR dm1000labelFanCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.90 | DisplayString | read-only | The value of this object provides the label of the Fan Current Analog parameter. |
| STR dm1000uomFanCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.91 | DisplayString | read-only | The value of this object provides the Unit of Measure of the Fan Current Analog parameter. |
| FLO dm1000majorHighFanCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.92 | Float | read-only | The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000majorLowFanCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.93 | Float | read-only | The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorHighFanCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.94 | Float | read-only | The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000minorLowFanCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.95 | Float | read-only | The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. All F's indicate the parameter is unused |
| FLO dm1000currentValueFanCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.96 | Float | read-only | The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000stateFlagFanCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.97 | INTEGER | read-only | The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| FLO dm1000minValueFanCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.98 | Float | read-only | The value of this object provides the minimum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| FLO dm1000maxValueFanCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.99 | Float | read-only | The value of this object provides the maximum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as an IEEE 32 bit number. |
| INT dm1000alarmStateFanCurrent | 1.3.6.1.4.1.1166.6.1.2.28.2.1.100 | INTEGER | read-only | The value of this object provides the curent alarm state of the Fan Current Analog parameter. |
| gx2Dm1000DigitalTable | 1.3.6.1.4.1.1166.6.1.2.28.3 | not-accessible | This table contains gx2Dm1000m specific parameters with nominal and current values. | |
| gx2Dm1000DigitalEntry | 1.3.6.1.4.1.1166.6.1.2.28.3.2 | not-accessible | This list contains digital parameters and descriptions. | |
| INT gx2Dm1000DigitalTableIndex | 1.3.6.1.4.1.1166.6.1.2.28.3.2.1 | INTEGER | read-only | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| STR dm1000labelRfInput | 1.3.6.1.4.1.1166.6.1.2.28.3.2.2 | DisplayString | read-only | The value of this object provides the label of the RF Input Control Digital parameter. |
| STR dm1000enumRfInput | 1.3.6.1.4.1.1166.6.1.2.28.3.2.3 | DisplayString | read-only | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1. |
| INT dm1000valueRfInput | 1.3.6.1.4.1.1166.6.1.2.28.3.2.4 | INTEGER | read-write | The value of this object is the current value of the parameter. |
| INT dm1000stateflagRfInput | 1.3.6.1.4.1.1166.6.1.2.28.3.2.5 | INTEGER | read-only | The value of this object provides the state of the RF Input Control Digital parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| STR dm1000labelOptOutput | 1.3.6.1.4.1.1166.6.1.2.28.3.2.6 | DisplayString | read-only | The value of this object provides the label of the Optical Output Control Digital parameter. |
| STR dm1000enumOptOutput | 1.3.6.1.4.1.1166.6.1.2.28.3.2.7 | DisplayString | read-only | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1. |
| INT dm1000valueOptOutput | 1.3.6.1.4.1.1166.6.1.2.28.3.2.8 | INTEGER | read-write | The value of this object is the current value of the parameter. |
| INT dm1000stateflagOptOutput | 1.3.6.1.4.1.1166.6.1.2.28.3.2.9 | INTEGER | read-only | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| STR dm1000labelSbsControl | 1.3.6.1.4.1.1166.6.1.2.28.3.2.10 | DisplayString | read-only | The value of this object provides the label of the SBS Control Digital parameter. |
| STR dm1000enumSbsControl | 1.3.6.1.4.1.1166.6.1.2.28.3.2.11 | DisplayString | read-only | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1. |
| INT dm1000valueSbsControl | 1.3.6.1.4.1.1166.6.1.2.28.3.2.12 | INTEGER | read-write | The value of this object is the current value of the parameter. |
| INT dm1000stateflagSbsControl | 1.3.6.1.4.1.1166.6.1.2.28.3.2.13 | INTEGER | read-only | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| STR dm1000labelLaserMode | 1.3.6.1.4.1.1166.6.1.2.28.3.2.14 | DisplayString | read-only | The value of this object provides the label of the Laser Mode Digital parameter. |
| STR dm1000enumLaserMode | 1.3.6.1.4.1.1166.6.1.2.28.3.2.15 | DisplayString | read-only | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1. |
| INT dm1000valueLaserMode | 1.3.6.1.4.1.1166.6.1.2.28.3.2.16 | INTEGER | read-write | The value of this object is the current value of the parameter. |
| INT dm1000stateflagLaserMode | 1.3.6.1.4.1.1166.6.1.2.28.3.2.17 | INTEGER | read-only | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| STR dm1000labelFactoryDefault | 1.3.6.1.4.1.1166.6.1.2.28.3.2.18 | DisplayString | read-only | The value of this object provides the label of the Factory Default Digital parameter. |
| STR dm1000enumFactoryDefault | 1.3.6.1.4.1.1166.6.1.2.28.3.2.19 | DisplayString | read-only | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.. |
| INT dm1000valueFactoryDefault | 1.3.6.1.4.1.1166.6.1.2.28.3.2.20 | INTEGER | read-write | The value of this object is the current value of the parameter. Return value is meaningless |
| INT dm1000stateflagFactoryDefault | 1.3.6.1.4.1.1166.6.1.2.28.3.2.21 | INTEGER | read-only | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| gx2Dm1000StatusTable | 1.3.6.1.4.1.1166.6.1.2.28.4 | not-accessible | This table contains gx2Dm1000 specific parameters with nominal and current values. | |
| gx2Dm1000StatusEntry | 1.3.6.1.4.1.1166.6.1.2.28.4.3 | not-accessible | This list contains Status parameters and descriptions. | |
| INT gx2Dm1000StatusTableIndex | 1.3.6.1.4.1.1166.6.1.2.28.4.3.1 | INTEGER | read-only | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| STR dm1000labelBoot | 1.3.6.1.4.1.1166.6.1.2.28.4.3.2 | DisplayString | read-only | The value of this object provides the label of the Boot Status Status parameter. |
| INT dm1000valueBoot | 1.3.6.1.4.1.1166.6.1.2.28.4.3.3 | INTEGER | read-only | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| INT dm1000stateflagBoot | 1.3.6.1.4.1.1166.6.1.2.28.4.3.4 | INTEGER | read-only | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| STR dm1000labelFlash | 1.3.6.1.4.1.1166.6.1.2.28.4.3.5 | DisplayString | read-only | The value of this object provides the label of the Flash Status Status parameter. |
| INT dm1000valueFlash | 1.3.6.1.4.1.1166.6.1.2.28.4.3.6 | INTEGER | read-only | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| INT dm1000stateflagFlash | 1.3.6.1.4.1.1166.6.1.2.28.4.3.7 | INTEGER | read-only | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| STR dm1000labelFactoryDataCRC | 1.3.6.1.4.1.1166.6.1.2.28.4.3.8 | DisplayString | read-only | The value of this object provides the label of the Factory Data CRC Status parameter. |
| INT dm1000valueFactoryDataCRC | 1.3.6.1.4.1.1166.6.1.2.28.4.3.9 | INTEGER | read-only | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| INT dm1000stateflagFactoryDataCRC | 1.3.6.1.4.1.1166.6.1.2.28.4.3.10 | INTEGER | read-only | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| STR dm1000labelLaserDataCRC | 1.3.6.1.4.1.1166.6.1.2.28.4.3.11 | DisplayString | read-only | The value of this object provides the label of the Laser Data CRC Status parameter. |
| INT dm1000valueLaserDataCRC | 1.3.6.1.4.1.1166.6.1.2.28.4.3.12 | INTEGER | read-only | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| INT dm1000stateflagLaserDataCRC | 1.3.6.1.4.1.1166.6.1.2.28.4.3.13 | INTEGER | read-only | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| STR dm1000labelAlarmDataCrc | 1.3.6.1.4.1.1166.6.1.2.28.4.3.14 | DisplayString | read-only | The value of this object provides the label of the Alarm Data Crc parameter. |
| INT dm1000valueAlarmDataCrc | 1.3.6.1.4.1.1166.6.1.2.28.4.3.15 | INTEGER | read-only | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| INT dm1000stateflagAlarmDataCrc | 1.3.6.1.4.1.1166.6.1.2.28.4.3.16 | INTEGER | read-only | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| STR dm1000labelRFInputStatus | 1.3.6.1.4.1.1166.6.1.2.28.4.3.17 | DisplayString | read-only | The value of this object provides the label of the Alarm Data Crc parameter. |
| INT dm1000valueRFInputStatus | 1.3.6.1.4.1.1166.6.1.2.28.4.3.18 | INTEGER | read-only | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| INT dm1000stateflagRFInputStatus | 1.3.6.1.4.1.1166.6.1.2.28.4.3.19 | INTEGER | read-only | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| gx2Dm1000FactoryTable | 1.3.6.1.4.1.1166.6.1.2.28.5 | not-accessible | This table contains gx2Dm1000 specific parameters with nominal and current values. | |
| gx2Dm1000FactoryEntry | 1.3.6.1.4.1.1166.6.1.2.28.5.4 | not-accessible | This list contains Factory parameters and descriptions. | |
| INT gx2Dm1000FactoryTableIndex | 1.3.6.1.4.1.1166.6.1.2.28.5.4.1 | INTEGER | read-only | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| INT dm1000bootControlByte | 1.3.6.1.4.1.1166.6.1.2.28.5.4.2 | INTEGER | read-only | The value of this object indicates which bank the firmware is currently being boot from. |
| INT dm1000bootStatusByte | 1.3.6.1.4.1.1166.6.1.2.28.5.4.3 | INTEGER | read-only | This object indicates the status of the last boot. Bit 2 = Bank 0/1 Active (0 = Bank 0, 1 = Bank 1), Bit 1 = Bank 1 Fail and Bit 0 = Bank 0 Fail (0 = Pass, 1 = Fail) |
| INT dm1000bank1CRC | 1.3.6.1.4.1.1166.6.1.2.28.5.4.4 | INTEGER | read-only | This object provides the CRC code of bank 0. The display formate for the data is Hex. |
| INT dm1000bank2CRC | 1.3.6.1.4.1.1166.6.1.2.28.5.4.5 | INTEGER | read-only | This object provides the CRC code of bank 1.The display formate for the data is Hex. |
| INT dm1000prgEEPROMByte | 1.3.6.1.4.1.1166.6.1.2.28.5.4.6 | INTEGER | read-only | This object indicates if the EEPROM has been programmed |
| INT dm1000factoryCRC | 1.3.6.1.4.1.1166.6.1.2.28.5.4.7 | INTEGER | read-only | This object provides the CRC code for the Factory data. |
| INT dm1000calculateCRC | 1.3.6.1.4.1.1166.6.1.2.28.5.4.8 | INTEGER | read-only | This object indicates which of the Enums will have the CRC calculated. |
| INT dm1000hourMeter | 1.3.6.1.4.1.1166.6.1.2.28.5.4.9 | INTEGER | read-only | This object provides the hour meter reading of the module. |
| INT dm1000flashPrgCntA | 1.3.6.1.4.1.1166.6.1.2.28.5.4.10 | INTEGER | read-only | This object provides the number of times Bank 1 flash has been programmed. |
| INT dm1000flashPrgCntB | 1.3.6.1.4.1.1166.6.1.2.28.5.4.11 | INTEGER | read-only | This object provides the number of times Bank 1 flash has been programmed. |
| STR dm1000flashBankARev | 1.3.6.1.4.1.1166.6.1.2.28.5.4.12 | DisplayString | read-only | This object provides the revision of flash bank 0. The rev is 2 characters. |
| STR dm1000flashBankBRev | 1.3.6.1.4.1.1166.6.1.2.28.5.4.13 | DisplayString | read-only | This object provides the revision of flash bank 1. The rev is 2 characters. |
RFC description
Manages OMNISTAR DM 1550 laser transmitter modules for HFC network forward path optical elements.
Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 Dm1000 downstream optical transmitter module) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.