MODULES-MIB

All MIBs › MODULES-MIB

Category: Network Management, Products/Registration

Description: Provides MIB module registration and capability declaration objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MODULES-MIB?

MODULES-MIB appears to be a legacy enterprise MIB whose actual objects describe hardware modules in a multi-protocol Ethernet/token-ring hub or concentrator chassis, despite its generic short description; it covers Ethernet Access Group (ethAg) and Ethernet Group (ethGroup) configuration alongside token-ring and terminal-server branches. It exposes per-module hardware configuration such as FIFO settings, 10BaseT-plus mode, internal port redundancy, backbone mode, and FOIRL (fiber optic inter-repeater link) mode for each Ethernet group in an installed module. It is used to monitor and configure the hardware-level operating mode of individual pluggable modules in a chassis -- e.g., whether backbone or redundancy modes are engaged and which physical media mode each group is running -- functioning as low-level hardware status rather than software or traffic data. No explicit dependency on other standard MIBs is evident from the available objects. This class of MIB is typically deployed on legacy multi-media Ethernet/token-ring hub or concentrator chassis where administrators manage individual pluggable modules' media and redundancy settings. Engineers can download the MODULES-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MODULES-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

legacy multi-protocol Ethernet/token-ring hub or concentrator chassis

Monitoring Examples

An admin could walk ethAgTable/ethAgEntry keyed by ethAgId to identify each Ethernet Access Group module in the chassis and check ethAgPerfBusSelection to confirm which performance bus it is wired to. Within ethGroupTable/ethGroupEntry, polling ethGroupBackboneMode and ethGroupIntPortsRedundancy for a given ethGroupId reveals whether a module has been placed into backbone/redundant mode, while ethGroupFOIRLPlusMode or ethGroup10BTPlus shows which physical media mode is active -- useful for spotting a module misconfigured for the wrong cable type.

What Can Be Monitored

Ethernet access group performance bus selection
Ethernet group FIFO setting
10BaseT-plus mode
internal port redundancy state
backbone mode
FOIRL mode

Imported Objects

From GEN-MIB

lannet

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
eth	1.3.6.1.4.1.81.12
ethAg	1.3.6.1.4.1.81.12.1
ethAgTable	1.3.6.1.4.1.81.12.1.1		not-accessible	Table of attributes which define configuration characteristics for chassis SNMP agents which use Ethernet as in-band management protocol.
ethAgEntry	1.3.6.1.4.1.81.12.1.1.1		not-accessible	An entry in the table, containing data about a single Ethernet agent.
INT ethAgId	1.3.6.1.4.1.81.12.1.1.1.1	INTEGER	read-only	Index which identifies the Ethernet agent for which the current entry provides information.
INT ethAgPerfBusSelection	1.3.6.1.4.1.81.12.1.1.1.2	INTEGER	read-write	Attribute describing the bus attached to the performance data collection hardware on those agent hardware implementations which support configuration management on multi-Ethernet bus enclosures, but performan- ce data collection on a single bus.
ethGroup	1.3.6.1.4.1.81.12.2
ethGroupTable	1.3.6.1.4.1.81.12.2.1		not-accessible	Table of attributes which define configuration characteristics for Ethernet modules.
ethGroupEntry	1.3.6.1.4.1.81.12.2.1.1		not-accessible	An entry in the table, containing data about a single Ethernet module (group).
INT ethGroupId	1.3.6.1.4.1.81.12.2.1.1.1	INTEGER	read-only	Index which identifies the group inside the chassis for which this entry contains information. Equals the number of the slot by which the group is accessed. This value is never greater than chNumberOfSlots.
INT ethGroupFIFO	1.3.6.1.4.1.81.12.2.1.1.2	INTEGER	read-only	Value ON of this attribute describes an internal FIFO error sensed by the internal hardware mechanism of a repeater.
INT ethGroup10BTPlus	1.3.6.1.4.1.81.12.2.1.1.3	INTEGER	read-write	Value ON of this attribute defines activation of the 10BaseTPlus mode - a proprietary extension of the 10BaseT standard.
INT ethGroupIntPortsRedundancy	1.3.6.1.4.1.81.12.2.1.1.4	INTEGER	read-write	Value ON of this attribute defines a redundancy (backup) relationship between internal ports 1 and 2 on a module.
INT ethGroupBackboneMode	1.3.6.1.4.1.81.12.2.1.1.5	INTEGER	read-write	Value On of this attribute defines Backbone Mode of a sensor. Internal ports are enabled and the information path goes straightly from external port to internal bus, via corresponding internal port.
INT ethGroupFOIRLPlusMode	1.3.6.1.4.1.81.12.2.1.1.6	INTEGER	read-write	Value On of this attribute defines FOIRL of a sensor. When this attribute has value ON, FOIRL Plus mode is enabled, while value OFF indicates stan- dard FOIRL mode.
INT ethGroupWrongPortSelection	1.3.6.1.4.1.81.12.2.1.1.7	INTEGER	read-only	A value ON of this attribute warns of incorrect selection of enabled ports on sensors which impose restrictions on this configura- tion (e.g. integrated local bridges.)
INT ethGroupBackupBus	1.3.6.1.4.1.81.12.2.1.1.8	INTEGER	read-write	Defines the common secondary bus for Ethernet modules with bus redundancy defined at port level.
INT ethGroupSingleBusMode	1.3.6.1.4.1.81.12.2.1.1.9	INTEGER	read-only	Value 'on of this attribute defines bus-star mode for cards supporting this type of configuration.
OID ethGroupSpecificOID	1.3.6.1.4.1.81.12.2.1.1.10	OBJECT IDENTIFIER	read-only	This attribute provides the OID of another group containing additional more specific information regarding this instance.
INT ethGroup10FBPlus	1.3.6.1.4.1.81.12.2.1.1.11	INTEGER	read-write	This variable enables/disables 10BaseFB plus mode.
INT ethGroupMasterClock	1.3.6.1.4.1.81.12.2.1.1.12	INTEGER	read-only	This attribute pertains to the SH-E16 chassis and defines the hub in the stack that generates the clock.
INT ethGroupIdleTrx	1.3.6.1.4.1.81.12.2.1.1.13	INTEGER	read-write	This attribute is relevant to the LE-120Q/SQ modules and when set to 'off' after port disable terminates also light propagation (for redundancy tests).
CTR ethGroupTotalFrames	1.3.6.1.4.1.81.12.2.1.1.15	Counter	read-only	The total number of frames of valid frame length that have been received on the ports in this group and for which the FCSError and CollisionEvent signals were not asserted. This statistic provides one of the parameters necessary for obtaining the packet error rate. The approximate minimum time for rollover of this counter is 80 hours. This item is a Repeater MIB counter.
CTR ethGroupTotalOctets	1.3.6.1.4.1.81.12.2.1.1.16	Counter	read-only	The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the ethPortReadableOctets counters for all of the ports in the group. This statistic provides an indicator of the total data transferred. The approximate minimum time for rollover of this counter is 58 minutes. This item is a Repeater MIB counter.
CTR ethGroupTotalErrors	1.3.6.1.4.1.81.12.2.1.1.17	Counter	read-only	The total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of the ethPortTotalErrors counters for all of the ports in the group. This item is a Repeater MIB counter.
INT ethGroupBridgeMode	1.3.6.1.4.1.81.12.2.1.1.18	INTEGER	read-write	This attribute defines between which buses/ports the IELB bridge is bridging.
CTR ethGroupBroadcastPkts	1.3.6.1.4.1.81.12.2.1.1.19	Counter	read-only	The total number of good packets received that were directed to the broadcast address, through this ports group.
CTR ethGroupMulticastPkts	1.3.6.1.4.1.81.12.2.1.1.20	Counter	read-only	The total number of good packets received that were directed to a multicast address, through this ports group. Note that this number does not include packets directed to the broadcast address.
ethPort	1.3.6.1.4.1.81.12.3
ethPortTable	1.3.6.1.4.1.81.12.3.1		not-accessible
ethPortEntry	1.3.6.1.4.1.81.12.3.1.1		not-accessible
INT ethPortGroupId	1.3.6.1.4.1.81.12.3.1.1.1	INTEGER	read-only	Id of the group to which the port belongs.
INT ethPortId	1.3.6.1.4.1.81.12.3.1.1.2	INTEGER	read-only	Unique Id of the port in the ethPortTable.
INT ethPortFunctionalStatus	1.3.6.1.4.1.81.12.3.1.1.3	INTEGER	read-only	The value of this attribute reflects the functional status of synchronous ports. Note that it is not mandatory that all ports support all the enumerated states. ok(1) - fully functional port, transmitting and receiving packets. rld(2) - receive link down condition on the port - Indicates a cable or connector failure detected by the port H/W. localJabber(3) - fault condition indicating that the port emitted jabber (excessive long transmission) tld(4) - transmit link down condition on the port - Indicates a cable or connector failure detected by the H/W of a port connected to the monitored port. remoteJabber(5) - fault condition indicating that remote jabber was sensed at the port. illSeq(6) - fault condition indicating an illegal synchronization sequence at the port. shortCircuit(7) - short-circuit fault condition detected at the port. partitionOrLocalJabber(8) - one of the partition or local jabber (excessive long transmission) was detected at the port of an optical repeater ) - remoteFaultOrLockLoss(9) - one of optical repeater fault conditions, detected by the port H/W. remoteFault(10) - fault condition, detected by an optical port connected to the monitored port. lockLost(11) - optical port H/W fault.
INT ethPortManPart	1.3.6.1.4.1.81.12.3.1.1.4	INTEGER	read-write	Setting the value of this attribute to ON activates the manual partition mechanism at the port level. Setting the value of this attribute to OFF cancels the partition mechanism. The segment may reconnect after the reception of 32 packets. Attribute vaild for repeater modules from the LE-10 family.
INT ethPortJabber	1.3.6.1.4.1.81.12.3.1.1.5	INTEGER	read-only	Value ON of this attribute reflects jabber transmitted to the port by the hardware of a repeater or transceiver, as a result of collisions detected on the port. Valid for all modules in the LE-10 and LE-15 families.
INT ethPortNoAUILoop	1.3.6.1.4.1.81.12.3.1.1.6	INTEGER	read-only	Value ON of this attribute indicates that a No AUI Loop fault condition was detected on an AUI repeater port. Valid for LE-10C family of modu- les.
INT ethPortMJLP	1.3.6.1.4.1.81.12.3.1.1.7	INTEGER	read-only	Value ON of this attribute describes an internal MJLP (MAU Jabber Lockup Protection) error sensed by the internal hardware mechanism of a repeater. This mechanism is activated to protect the repeater ports from a jabber condition (excessive long transmission) detected on one of the port. Valid for LE140XTF.
INT ethPortFIFO	1.3.6.1.4.1.81.12.3.1.1.8	INTEGER	read-only	Value ON of this attribute describes an internal FIFO error sensed by the internal hardware mechanism of a repeater. Valid for LE140XTF.
INT ethPortAutoPartitionState	1.3.6.1.4.1.81.12.3.1.1.9	INTEGER	read-only	The AutoPart condition indicates that the port is currently partitioned by the auto-partition protection mechanism.
INT ethPortSQETest	1.3.6.1.4.1.81.12.3.1.1.10	INTEGER	read-write	Settable attribute which allows activation of SQE test for integrated transceivers.
OCT ethPortLastSourceAddr	1.3.6.1.4.1.81.12.3.1.1.11	OCTET STRING	read-write	Ethernet source address of the last readable frame received by this port. The value of this item may be set to 000000 (a string of 6 zeros) by a management console, but not to any other value.
INT ethPortUserStatus	1.3.6.1.4.1.81.12.3.1.1.12	INTEGER	read-only	Attribute defining the connection of a port to a single Ethernet source or to a multi-source (segment or star).
INT ethPortMainBusSelection	1.3.6.1.4.1.81.12.3.1.1.13	INTEGER	read-write	On cards with port-level redundancy, defines the main bus for each port instance as selected by user.
CTR ethPortTraffic	1.3.6.1.4.1.81.12.3.1.1.14	Counter	read-only	Counter for the number of bits received on this port in frames with legal length information.
CTR ethPortFramesReceivedOK	1.3.6.1.4.1.81.12.3.1.1.15	Counter	read-only	A representation of the total number of frames of legal length that have not been corrupted in transmission. These frames can be encoded and decoded by the commonly available MACs and provide a measure of the network bandwidth being used. The number does not include frames received with frame-too-long, FCS, alignment errors, frames lost due to internal MAC sublayer errors, runts or pygmys.
CTR ethPortRunts	1.3.6.1.4.1.81.12.3.1.1.16	Counter	read-only	This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The ActivityDuration is greater than ShortEventMaxTime and less than ValidPacketMinTime and the CollisionEvent signal is deasserted. b) The OctetCount is less than 64, the ActivityDuration is greater than ShortEventMaxTime and the CollisionEvent signal is deasserted. ValidPacketMinTime is greater than or equal to 552 bit times and less than 565 bit times. An event whose length is greater than 74 bit times but less than 82 bit times shall increment either the shortEvents counter or the runts counter but not both. A CarrierEvent greater than or equal to 552 bit times but less than 565 bit times may or may not be counted as a runt. ValidPacketMinTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine. Runts usually indicate collision fragments, a normal network event. In certain situations associated with large diameter networks a percentage of collision fragments may exceed ValidPacketMinTime. The approximate minimum time for rollover of this counter is 16 hours. REFERENCE Reference IEEE 802.3 Rptr Mgt, 19.2.6.2, aRunts.
CTR ethPortPacketErrors	1.3.6.1.4.1.81.12.3.1.1.17	Counter	read-only	Counter for the number of frames with errors detected on the port by the agent hardware. This generic port error comprises too long packets, CRC and alignment errors.
OID ethPortSpecificOID	1.3.6.1.4.1.81.12.3.1.1.18	OBJECT IDENTIFIER	read-only	This attribute provides the OID of another group containing additional more specific information regarding this instance.
CTR ethPortCollisions	1.3.6.1.4.1.81.12.3.1.1.19	Counter	read-only	This counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is also asserted. The approximate minimum time for rollover of this counter is 16 hours. Relevant for MPR and HIMIB modules. REFERENCE Reference IEEE 802.3 Rptr Mgt, 19.2.6.2, aCollisions.
CTR ethPortPartitions	1.3.6.1.4.1.81.12.3.1.1.20	Counter	read-only	This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specified in the partition state machine in Section 9 [IEEE 802.3 Std]. They are not differentiated here. Relevant for MPR and HIMIB modules. REFERENCE Reference IEEE 802.3 Rptr Mgt, 19.2.6.2, aAutoPartitions.
CTR ethPortPygmys	1.3.6.1.4.1.81.12.3.1.1.21	Counter	read-only	The number of pygmys observed on a specified port. The pygmy is a short event. This counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 bit times and less than 82 bit times. ShortEventMaxTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine. Note: shortEvents may indicate externally generated noise hits which will cause the repeater to transmit Runts to its other ports, or propagate a collision (which may be late) back to the transmitting DTE and damaged frames to the rest of the network. Implementors may wish to consider selecting the ShortEventMaxTime towards the lower end of the allowed tolerance range to accommodate bit losses suffered through physical channel devices not budgeted for within this standard. The approximate minimum time for rollover of this counter is 16 hours. REFERENCE Reference IEEE 802.3 Rptr Mgt, 19.2.6.2, aShortEvents.
CTR ethPortJabberCounter	1.3.6.1.4.1.81.12.3.1.1.22	Counter	read-only	Counter for the number of local jabbers detected on a specific port (LE-115Q).
INT ethPortCoupling	1.3.6.1.4.1.81.12.3.1.1.23	INTEGER	read-only	Indication of port's coupling method in Ethernet transceiver modules (LE-115Q). The coupling methode can be set on board, using specific jumpers.
INT ethPortPolarity	1.3.6.1.4.1.81.12.3.1.1.24	INTEGER	read-only	This item defines the polarity state of the connection to LE-240XTC and LE-280XT ports. If the wires are crossed, the value is crossed(2), otherwise ok(1).
CTR ethPortReadableFrames	1.3.6.1.4.1.81.12.3.1.1.25	Counter	read-only	This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on this port whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3 Std, 4.4.2.1) and for which the FCSError and CollisionEvent signals are not asserted. This statistic provides one of the parameters necessary for obtaining the packet error rate. The approximate minimum time for rollover of this counter is 80 hours. REFERENCE Reference IEEE 802.3 Rptr Mgt, 19.2.6.2, aReadableFrames.
CTR ethPortReadableOctets	1.3.6.1.4.1.81.12.3.1.1.26	Counter	read-only	This counter is the number of octets contained in valid frames that have been received on this port.It is incremented for each frame received on this port which has been determined to be a readable frame (including FCS octets but excluding framing bits and dribble bits). This statistic provides an indicator of the total data transferred. The approximate minimum time for rollover of this counter is 58 minutes. This object is a Repeater MIB counter.
CTR ethPortFCSErrors	1.3.6.1.4.1.81.12.3.1.1.27	Counter	read-only	This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). The approximate minimum time for rollover of this counter is 80 hours. This object is a Repeater MIB counter.
CTR ethPortAlignmentErrors	1.3.6.1.4.1.81.12.3.1.1.28	Counter	read-only	This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3 Std, 4.4.2.1). The approximate minimum time for rollover of this counter is 80 hours. This object is a Repeater MIB counter.
CTR ethPortFramesTooLong	1.3.6.1.4.1.81.12.3.1.1.29	Counter	read-only	This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). The approximate minimum time for rollover of this counter is 61 days. This object is a Repeater MIB counter.
CTR ethPortLateEvents	1.3.6.1.4.1.81.12.3.1.1.30	Counter	read-only	This counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE (Ref:9.6.6.2, IEEE 802.3 Std) while the ActivityDuration is greater than the LateEventThreshold. Such a CarrierEvent is counted twice, as both a collision and as a lateEvent. The approximate minimum time for rollover of this counter is 81 hours. This object is a Repeater MIB counter.
CTR ethPortVeryLongEvents	1.3.6.1.4.1.81.12.3.1.1.31	Counter	read-only	This counter is incremented by one for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9.6.1 & 9.6.5, IEEE 802.3 Std). Other counters may be incremented as appropriate. This object is a Repeater MIB counter.
CTR ethPortDataRateMismatches	1.3.6.1.4.1.81.12.3.1.1.32	Counter	read-only	This counter is incremented by one for each frame received on this port that meets all of the following conditions: a) The CollisionEvent signal is not asserted. b) The ActivityDuration is greater than ValidPacketMinTime. c) The frequency (data rate) is detectably mismatched from the local transmit frequency. This object is a Repeater MIB counter.
CTR ethPortTotalErrors	1.3.6.1.4.1.81.12.3.1.1.33	Counter	read-only	The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: ethPortFCSErrors, ethPortAlignmentErrors, ethPortFrameTooLongs, ethPortShortEvents, ethPortLateEvents, ethPortVeryLongEvents, and ethPortDataRateMismatches. This object is a Repeater MIB counter.
CTR ethPortSourceAddrChanges	1.3.6.1.4.1.81.12.3.1.1.34	Counter	read-only	This counter is incremented by one for each time that the last source address of frames entering this port has changed. This may indicate whether a link is connected to a single DTE or another multi-user segment. The approximate minimum time for rollover of this counter is 81 hours. This object is a Repeater MIB counter.
INT ethPortOperStatus	1.3.6.1.4.1.81.12.3.1.1.35	INTEGER	read-only	This object indicates the port's operational status. The operational(1) status indicates that the port is enabled and working, even though it might be auto-partitioned.
CTR ethPortBroadcastPkts	1.3.6.1.4.1.81.12.3.1.1.36	Counter	read-only	The total number of good packets received that were directed to the broadcast address.
CTR ethPortMulticastPkts	1.3.6.1.4.1.81.12.3.1.1.37	Counter	read-only	The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
ethIntPort	1.3.6.1.4.1.81.12.4
ethIntPortTable	1.3.6.1.4.1.81.12.4.1		not-accessible
ethIntPortEntry	1.3.6.1.4.1.81.12.4.1.1		not-accessible
INT ethIntPortGroupId	1.3.6.1.4.1.81.12.4.1.1.1	INTEGER	read-only	ID of the group to which the internal port belongs.
INT ethIntPortId	1.3.6.1.4.1.81.12.4.1.1.2	INTEGER	read-only	ID of the internal port in the ethIntPortTable.
INT ethIntPortPartition	1.3.6.1.4.1.81.12.4.1.1.3	INTEGER	read-only	This condition indicates that the internal port is currently partitioned from the bus by the auto-partition protection mechanism.
INT ethIntPortJabber	1.3.6.1.4.1.81.12.4.1.1.4	INTEGER	read-only	Value ON of this attribute reflects jabber being transmitted to the bus by the hardware of a repeater, as a result of collisions detected on the internal bus of the enclosure. This situation is similar to MJLP as defined by the Repeater Management standard.
INT ethIntPortBackedUp	1.3.6.1.4.1.81.12.4.1.1.5	INTEGER	read-write	Indicates that internal port is part of a redundancy scheme.
ethBus	1.3.6.1.4.1.81.12.5
ethBusPerfTable	1.3.6.1.4.1.81.12.5.1		not-accessible
ethBusPerfEntry	1.3.6.1.4.1.81.12.5.1.1		not-accessible
INT ethBusPerfAgId	1.3.6.1.4.1.81.12.5.1.1.1	INTEGER	read-only	ID of the agent in the ethBusPerfTable.
INT ethBusPerfId	1.3.6.1.4.1.81.12.5.1.1.2	INTEGER	read-only	ID of the bus in the ethBusPerfTable.
OCT ethBusTrafficBuffer	1.3.6.1.4.1.81.12.5.1.1.3	OCTET STRING	read-only	Record of traffic for the last second with a resolution of 100 msec. The traffic is expressed in percents of the maximum Ethernet traffic and each record contains 10 readings, in the range 1..20, expressed on a log(10) scale ( value = 10*log10(percent) ).
INT ethBusTrafficThresh	1.3.6.1.4.1.81.12.5.1.1.4	INTEGER	read-write	Traffic threshold value. When exceeded, a trap is send to the management console. Expressed in percents of the maximum Ethernet traffic, in the range 1..20, expressed on a log(10) scale.
INT ethBusPeakTraffic	1.3.6.1.4.1.81.12.5.1.1.5	INTEGER	read-write	Maximal traffic value since last reset of hub or relay. Expressed in per- cents of the maximum Ethernet traffic, in the range 1..20, expressed on log(10) scale. The write access is reserved for resetting the value of the peak.
CTR ethBusTotalCollisions	1.3.6.1.4.1.81.12.5.1.1.6	Counter	read-only	Counter incremented every time the hub enters a condition caused by simultaneous transmission and detection of external activity on one or more of its ports.
CTR ethBusTotalPackets	1.3.6.1.4.1.81.12.5.1.1.7	Counter	read-only	Counter for number of packets (good and errors) detected on the Ethernet bus.
CTR ethBusTotalErrors	1.3.6.1.4.1.81.12.5.1.1.8	Counter	read-only	Counter for number of errors detected on the Ethernet bus. Does not take into account the collisions.
INT ethBusTraffic	1.3.6.1.4.1.81.12.5.1.1.9	INTEGER	read-only	Last traffic reading (sampling time = 100 msec). The traffic is expressed in percents of the maximum Ethernet traffic in the range 1..20, expressed on a log(10) scale ( value = 10*log10(percent) ).
INT ethBusUtilization	1.3.6.1.4.1.81.12.5.1.1.10	INTEGER	read-only	Last traffic reading (sampling time = 100 msec). The traffic is expressed in percents of the maximum Ethernet traffic.
INT ethBusPeakUtilization	1.3.6.1.4.1.81.12.5.1.1.11	INTEGER	read-only	Maximal traffic value since last reset of agent. Expressed in percents of the maximum effective Ethernet traffic.
OCT ethBusThresholdStatus	1.3.6.1.4.1.81.12.5.1.1.12	OCTET STRING	read-only	This item is a bitmap that defines the threshold status of the bus, in relation to the alarmPolicyTable. If the bus is monitored by the agent according to policy number x in the alarmPolicyTable, and the threshold condition has occured, then the bit #x in this item will have the value '1'. Otherwise it will be '0'. For x-186 based agents all bits of this item are '0'.
ethBusClockTable	1.3.6.1.4.1.81.12.5.2		not-accessible
ethBusClockEntry	1.3.6.1.4.1.81.12.5.2.1		not-accessible
INT ethBusClockBusId	1.3.6.1.4.1.81.12.5.2.1.1	INTEGER	read-only	ID of the bus in the ethBusClockTable.
INT ethBusClockId	1.3.6.1.4.1.81.12.5.2.1.2	INTEGER	read-only	ID of the clock in the ethBusClockTable.
INT ethBusClockTestResult	1.3.6.1.4.1.81.12.5.2.1.3	INTEGER	read-only	Values clockFailure(2) and busFailure(3) define the faulty status for clock tests. The test is performed by LCL100 module.
feth	1.3.6.1.4.1.81.12.6
fethPort	1.3.6.1.4.1.81.12.6.1
fethPortTable	1.3.6.1.4.1.81.12.6.1.1		not-accessible	Table of descriptive, status, performance and error information about the ports.
fethPortEntry	1.3.6.1.4.1.81.12.6.1.1.1		not-accessible	An entry in the table, containing information, performance and error statistics about a single port.
INT fethPortGroupId	1.3.6.1.4.1.81.12.6.1.1.1.1	INTEGER	read-only	Id of the group to which the port belongs.
INT fethPortId	1.3.6.1.4.1.81.12.6.1.1.1.2	INTEGER	read-only	Unique Id of the port in the ethPortTable.
INT fethPortFunctionalStatus	1.3.6.1.4.1.81.12.6.1.1.1.3	INTEGER	read-only	The value of this attribute reflects the functional status of LANNET 100BaseTX port. Here is the set possible states: ok(1)- fully functional port, transmitting and receiving packets. rld(2) - receive link down (Link Test Failure) condition on the port - indicates a broken connection (cable, connector) detected by the port. rxJabber(3) - fault condition indicating that the port received long packet (jabber) from the line. partition(8) - the port is in partition state. remoteFault(10) - fault condition sensed by the remote port. wrong speed(12) - 10Mbit transmission sensed by the port.
INT fethPortFIFO	1.3.6.1.4.1.81.12.6.1.1.1.4	INTEGER	read-only	Value ON of this attribute describes an internal FIFO error sensed by the internal hardware mechanism of a the port.
INT fethPortOperStatus	1.3.6.1.4.1.81.12.6.1.1.1.5	INTEGER	read-only	This object indicates the port's operational status. The operational(1) status indicates that the port is enabled and working, even though it might be auto-partitioned.
INT fethPortAutoPartitionState	1.3.6.1.4.1.81.12.6.1.1.1.6	INTEGER	read-only	The AutoPart condition indicates that the port is currently partitioned by the auto-partition protection mechanism.
CTR fethPortFramesReceived	1.3.6.1.4.1.81.12.6.1.1.1.7	Counter	read-only	A representation of the total number of frames received by the port from the line. The number includes all frames received even those with RxError or alignment errors or those that had been corrupred in transmission.
CTR fethPortFramesTransmitted	1.3.6.1.4.1.81.12.6.1.1.1.8	Counter	read-only	A representation of the total number of frames transmitted by the port to the line. The number includes all frames transmitted.
CTR fethPortTotalErrors	1.3.6.1.4.1.81.12.6.1.1.1.9	Counter	read-only	The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: fethPortFCSErrors, fethPortAlignmentErrors, fethPortFrameTooLongs, fethPortShortEvents, fethPortLateEvents, fethPortVeryLongEvents, fethPortDataRateMismatches, For LFE-100 only : fethPortAlignmentErrors, fethPortRxErrors. This counter is redundant in the sense that it is the summation of information already available through other objects. However, it is included specifically because the regular retrieval of this object as a means of tracking the health of a port provides a considerable optimization of network management traffic over the otherwise necessary retrieval of the summed counters. REFERENCE Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortTotalErrors.
CTR fethPortFramesTransmittedOK	1.3.6.1.4.1.81.12.6.1.1.1.10	Counter	read-only	A representation of the total number of frames of legal length that have not been corrupted in transmission that transmitted by the port to the line. These frames can be encoded and decoded by the commonly available MACs. Not supported by LFE1008.
CTR fethPortCollisionFrames	1.3.6.1.4.1.81.12.6.1.1.1.11	Counter	read-only	This counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is also asserted.
CTR fethPortAlignmentErrors	1.3.6.1.4.1.81.12.6.1.1.1.12	Counter	read-only	This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize.
CTR fethPortRxErrors	1.3.6.1.4.1.81.12.6.1.1.1.13	Counter	read-only	The total number of received frames with error code violation or dose not terminate correctlly.
CTR fethPortReadableFrames	1.3.6.1.4.1.81.12.6.1.1.1.14	Counter	read-only	This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on this port whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3 Std, 4.4.2.1) and for which the FCSError and CollisionEvent signals are not asserted. This statistic provides one of the parameters necessary for obtaining the packet error rate. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.4, aReadableFrames. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortReadableFrames.
CTR fethPortUpper32ReadableOctets	1.3.6.1.4.1.81.12.6.1.1.1.15	Counter	read-only	This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e., including FCS octets but excluding framing bits and dribble bits). This statistic provides an indicator of the total data transferred. Note that this counter and fethPortLower32ReadableOctets forms a 64 bits counter. It is provided for those network management protocols that do not support 64 bit counters (e.g. SNMP V1) and the repeater type is 100Mbs. REFERENCE Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortUpper32ReadableOctets.
CTR fethPortLower32ReadableOctets	1.3.6.1.4.1.81.12.6.1.1.1.16	Counter	read-only	This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e., including FCS octets but excluding framing bits and dribble bits). This statistic provides an indicator of the total data transferred. Note that this counter and fethPortUpper32ReadableOctets forms a 64 bits counter. It is provided for those network management protocols that do not support 64 bit counters (e.g. SNMP V1) and the repeater type is 100Mbs. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.5, aReadableOctets. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortLower32ReadableOctets.
CTR fethPortFCSErrors	1.3.6.1.4.1.81.12.6.1.1.1.17	Counter	read-only	This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.6, aFrameCheckSequenceErrors. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortFCSErrors.
CTR fethPortFrameTooLongs	1.3.6.1.4.1.81.12.6.1.1.1.18	Counter	read-only	This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If fethPortFrameTooLongs is incremented then neither the fethPortAlignmentErrors nor the fethPortFCSErrors counter shall be incremented for the frame. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.8, aFramesTooLong. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortFrameTooLongs.
CTR fethPortShortEvents	1.3.6.1.4.1.81.12.6.1.1.1.19	Counter	read-only	This counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is 84 bits (21 nibbles). Note: shortEvents may indicate externally generated noise hits which will cause the repeater to transmit Runts to its other ports, or propagate a collision (which may be late) back to the transmitting DTE and damaged frames to the rest of the network. Implementors may wish to consider selecting the ShortEventMaxTime towards the lower end of the allowed tolerance range to accommodate bit losses suffered through physical channel devices not budgeted for within this standard. Note also that clause 27 repeaters do not perform fragment extension as clause 9 repeater does. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.9, aShortEvents. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortShortEvents.
CTR fethPortRunts	1.3.6.1.4.1.81.12.6.1.1.1.20	Counter	read-only	This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The ActivityDuration is greater than ShortEventMaxTime and less than validPacketMinTime and the CollisionEvent signal is deasserted. b) The OctetCount is less than 64, the ActivityDuration is greater than ShortEventMaxTime and the CollisionEvent signal is deasserted. ValidPacketMinTime is greater than or equal to 552 bit times and less than 565 bit times. ValidPacketMinTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine. Runts usually indicate collision fragments, a normal network event. In certain situations associated with large diameter networks a percentage of collision fragments may exceed ValidPacketMinTime. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.1.3.10, aRunts. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortRunts.
CTR fethPortLateEvents	1.3.6.1.4.1.81.12.6.1.1.1.21	Counter	read-only	This counter is incremented by one on entering the Collision Count Increment state of the partition state diagram (fig 27-8) while the ActivityDuration is greater than the LateEvent- Threshold. Such a CarrierEvent is counted twice, as both collision and a late event. The LateEventThreshold is greater than 480 bit times and less than 565 bit times. LateEventThreshold has tolerances included to permit an implementation to build a single threshold to serve as both the LateEventThreshold and ValidPacketMinTime threshold. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.12, aLateEvents. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortLateEvents.
CTR fethPortVeryLongEvents	1.3.6.1.4.1.81.12.6.1.1.1.22	Counter	read-only	This counter is incremented by one on entry to the Rx Jabber state of the receiver timer state diagram (fig 27-7). Other counters may be incremented as appropriate. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.13, aVeryLongEvents. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortVeryLongEvents.
CTR fethPortDataRateMismatches	1.3.6.1.4.1.81.12.6.1.1.1.23	Counter	read-only	This counter is incremented by one for each frame received on this port that meets all of the following conditions: a) the Collision Count Increment state of the partition state diagram (fig 27-8) has not been entered. b) The ActivityDuration is greater than ValidPacketMinTime. c) The frequency (data rate) is detectably mismatched from the local transmit frequency. The exact degree of mismatch is vendor specific and is to be defined by the vendor for conformance testing. When this event occurs, other counters whose increment conditions were satisfied may or may not also be incremented, at the implementor's discretion. Whether or not the repeater was able to maintain data integrity is beyond the scope of this standard. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.14, aDataRateMismatches. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortDataRateMismatches.
CTR fethPortAutoPartitions	1.3.6.1.4.1.81.12.6.1.1.1.24	Counter	read-only	This counter is incremented by one on entry to the Partition Wait state of the partition state diagram (fig 27-8). REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.14, aAutoPartitions. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortAutoPartitions.
CTR fethPortSymbolErrors	1.3.6.1.4.1.81.12.6.1.1.1.25	Counter	read-only	This counter is incremented by one each time when valid length packet was received at the port and there was at least one occurrence of an invalid data symbol. This can increment only once per valid carrier event. A collision presence at any port of the repeater containing port N, will not cause this attribute to increment. This Counter has a maximum increment rate of 160,000 counts per second for 100Mb/s implementation. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.17, aSymbolErrorDuringPacket. Reference IETF 100Base-T Repeater MIB, rptr100MonitorPortSymbolErrors.
OCT fethPortLastSourceAddress	1.3.6.1.4.1.81.12.6.1.1.1.26	OCTET STRING	read-only	This object is the SourceAddress of the last readable frame (i.e., counted by fethPortReadableFrames) received by this port. If no frames have been received by this port since the agent began monitoring the port activity, the agent shall return a string of length zero. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.18, aLastSourceAddress. Reference IETF 100Base-T Repeater MIB, rptr100AddrTrackLastSourceAddress.
CTR fethPortSourceAddrChanges	1.3.6.1.4.1.81.12.6.1.1.1.27	Counter	read-only	This counter is incremented by one for each time that the fethPortLastSourceAddress attribute for this port has changed. This may indicate whether a link is connected to a single DTE or another multi-user segment. The approximate minimum time for rollover of this counter is 8 hours. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.3.1.19, aSourceAddressChanges. Reference IETF 100Base-T Repeater MIB, rptr100AddrTrackSourceAddrChanges.
INT fethPortMode	1.3.6.1.4.1.81.12.6.1.1.1.28	INTEGER	read-write	The mode of the port. halfDuplex(1)- standard mode, usually for segments. fullDuplex(2)- standard mode, usually for servers. fullDuplexAndFlowControl(3)- the module transmits Flow Control symbols to the line between two HUBs in order to control the flow of data. fullDuplexAndISL(4)- the module transmits to the line a control-word from the HSB, in order to transfer VLANs and Priority to another HUB ( ISL=Inter Switch Link). fullDuplexAndFlowControlAndISL(5)- FDX with both Flow Control and ISL modes. It is the user's responsibility to set both modules connected to the line, to the same mode.
INT fethPortLinkRedundancyMode	1.3.6.1.4.1.81.12.6.1.1.1.29	INTEGER	read-write	This item is relevant for modules which include redundant links. This item enables/disables the Redundancy mechanism. When enabled, the Sensor will alternately switch between the main and secondary ports/links, upon a predefined failure indication. See also the fethPortEnablePHY item.
INT fethPortLinkRedundancyStatus	1.3.6.1.4.1.81.12.6.1.1.1.30	INTEGER	read-only	This item is relevant for ports which includes redundant links. This item indicates which of the links is active. Default value=firstLinkActive(1).
INT fethPortDormantLinkFunctionalStatus	1.3.6.1.4.1.81.12.6.1.1.1.31	INTEGER	read-only	The value of this attribute reflects the functionality status of the dormant link, in modules such as LEB-200, which have link redundancy capability. Note that the Main Link functionality status is still reflected by the fethPortFunctionalStatus item as usual.. Default value=ok(1).
CTR fethPortUpper32TransmittedOctets	1.3.6.1.4.1.81.12.6.1.1.1.32	Counter	read-only	This object is the number of octets contained in valid frames that have been transmitted on this port. This counter is incremented by OctetCount for each frame transmitted on this port which has not been encountered with a collision event. This statistic provides an indicator of the total data transferred. Note that this counter and fethPortLower32TransmittedOctets forms a 64 bits counter. It is provided for those network management protocols that do not support 64 bit counters (e.g. SNMP V1) and the repeater type is 100Mbs.
CTR fethPortLower32TransmittedOctets	1.3.6.1.4.1.81.12.6.1.1.1.33	Counter	read-only	This object is the number of octets contained in valid frames that have been transmitted on this port.This counter is incremented by OctetCount for each frame transmitted on this port which has not been encountered with a collision event. This statistic provides an indicator of the total data transferred. Note that this counter and fethPortUpper32TransmittedOctets forms a 64 bits counter. It is provided for those network management protocols that do not support 64 bit counters (e.g. SNMP V1) and the repeater type is 100Mbs.
CTR fethPortBroadcastReceivedFrames	1.3.6.1.4.1.81.12.6.1.1.1.34	Counter	read-only	This object is the number of Broadcast readable frames that have been Received on this port.
CTR fethPortMulticastReceivedFrames	1.3.6.1.4.1.81.12.6.1.1.1.35	Counter	read-only	This object is the number of Multicast readable (good) frames that have been Received on this port.
INT fethPortEnablePHY	1.3.6.1.4.1.81.12.6.1.1.1.36	INTEGER	read-write	This item is relevant for ports which include redundant links (such as LEB200). This item is not valid and has no effect when the fethPortLinkRedundancyMode=enable(1). This item determines and indicates the active PHY in case that fethPortLinkRedundancyMode is set to disable(2).
fethGroup	1.3.6.1.4.1.81.12.6.2
fethGroupTable	1.3.6.1.4.1.81.12.6.2.1		not-accessible	Table of descriptive, status, performance and error information about the groups of fast ethernet ports.
fethGroupEntry	1.3.6.1.4.1.81.12.6.2.1.1		not-accessible	An entry in the table, containing information, total performance and error statistics for a single group of ports. Regular retrieval of the information in this table provides a means of tracking the performance and health of the networked devices attached to this group's ports. The counters in this table are redundant in the sense that they are the summations of information already available through other objects. However, these sums provide a considerable optimization of network management traffic over the otherwise necessary retrieval of the individual counters included in each sum.
INT fethGroupId	1.3.6.1.4.1.81.12.6.2.1.1.1	INTEGER	read-only	This object identifies the group within the repeater for which this entry contains information. This value is never greater than fethRepeaterGroupCapacity. REFERENCE Reference IEEE Draft Std 802.3u/D4 Rptr Mgt, 30.4.2.1.1, aGroupID. Reference IETF 100Base-T Repeater MIB, rptr100GroupIndex.
INT fethGroupOperStatus	1.3.6.1.4.1.81.12.6.2.1.1.2	INTEGER	read-only	An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/or logically not a part of the repeater (Stand Alone). A status of operational(2) indicates that the group is functioning, and a status of malfunctioning(3) indicates that the group is malfunctioning in some way (see fethRepeaterOperStatus). REFERENCE Reference IETF 100Base-T Repeater MIB, rptr100GroupOperStatus.
INT fethGroupUtilization	1.3.6.1.4.1.81.12.6.2.1.1.3	INTEGER	read-only	Utilization of the network, expressed in percentage of the maximum traffic possible ( 100Mbps)
CTR fethGroupTotalFrames	1.3.6.1.4.1.81.12.6.2.1.1.4	Counter	read-only	The total number of frames of valid frame length that have been received on the ports in this group and for which the FCSError and CollisionEvent signals were not asserted. This counter is the summation of the values of the fethPortReadableFrames counters for all of the ports in the group. This statistic provides one of the parameters necessary for obtaining the packet error rate. REFERENCE Reference IETF 100Base-T Repeater MIB, rptr100MonitorGroupTotalFrames.
CTR fethGroupUpper32TotalOctets	1.3.6.1.4.1.81.12.6.2.1.1.5	Counter	read-only	The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the fethPortReadableOctets counters for all of the ports in the group. This statistic provides an indicator of the total data transferred. Note that this counter and fethGroupLower32TotalOctets forms a 64 bits counter. It is provided for those network management protocols that do not support 64 bit counters (e.g. SNMP V1) and the repeater type is 100Mbs. REFERENCE Reference IETF 100Base-T Repeater MIB, rptr100MonitorGroupUpper32TotalOctets.
CTR fethGroupLower32TotalOctets	1.3.6.1.4.1.81.12.6.2.1.1.6	Counter	read-only	The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the fethPortReadableOctets counters for all of the ports in the group. This statistic provides an indicator of the total data transferred. Note that this counter and fethGroupUpper32TotalOctets forms a 64 bits counter. It is provided for those network management protocols that do not support 64 bit counters (e.g. SNMP V1) and the repeater type is 100Mbs. REFERENCE Reference IETF 100Base-T Repeater MIB, rptr100MonitorGroupLower32TotalOctets.
CTR fethGroupTotalErrors	1.3.6.1.4.1.81.12.6.2.1.1.7	Counter	read-only	The total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of the fethPortTotalErrors counters for all of the ports in the group. REFERENCE Reference IETF 100Base-T Repeater MIB, rptr100MonitorGroupTotalErrors.
INT fethGroupFefiEnable	1.3.6.1.4.1.81.12.6.2.1.1.8	INTEGER	read-write	This item enables\disables the FEFI mechanism of the PHY on the module. It enables\disables both the transmission and the recognition of FEFI signals . This item is used only in modules that support 100BaseFx.
tok	1.3.6.1.4.1.81.13
tokRing	1.3.6.1.4.1.81.13.1
tokRingTable	1.3.6.1.4.1.81.13.1.1		not-accessible
tokRingEntry	1.3.6.1.4.1.81.13.1.1.1		not-accessible
INT tokRingAgId	1.3.6.1.4.1.81.13.1.1.1.1	INTEGER	read-only	ID of the agent to which the ring belongs in the tokRingTable.
INT tokRingId	1.3.6.1.4.1.81.13.1.1.1.2	INTEGER	read-only	ID of the ring in the tokRingTable.
INT tokRingLeftSlot	1.3.6.1.4.1.81.13.1.1.1.3	INTEGER	read-only	Slot number of the left-most slot of the ring. In the token ring stackable hub, 'Left' should be read as 'Up'.
INT tokRingRightSlot	1.3.6.1.4.1.81.13.1.1.1.4	INTEGER	read-write	Slot number of the right-most slot of the ring that has a lobe port. In the token ring stackable hub, 'Right' should be read as 'Down'.
OCT tokRingTrafficBuffer	1.3.6.1.4.1.81.13.1.1.1.5	OCTET STRING	read-only	Record of traffic for the last second with a resolution of 100 msec. The traffic is expressed in percents of the maximum effective TR traffic (token messages are excluded) and each record contains 10 readings, in range 1..20 on log(10) scale.
INT tokRingTrafficThresh	1.3.6.1.4.1.81.13.1.1.1.6	INTEGER	read-write	Traffic threshold value. When exceeded, a trap is send to the management console. Expressed in percents of the maximum effective TR traffic (token messages are excluded) in the range 1..20 on log(10) scale.
INT tokRingPeakTraffic	1.3.6.1.4.1.81.13.1.1.1.7	INTEGER	read-write	Maximal traffic value since last reset of agent. Expressed in percents of the maximum effective TR traffic (token messages are excluded), in the range 1..20 on log(10) scale. The write access is reserved for resetting the value of the peak.
INT tokRingNumberOfStations	1.3.6.1.4.1.81.13.1.1.1.8	INTEGER	read-only	Number of Token Ring stations (controllers) detected on the ring. The TR controller of the agent card is included in this count.
OCT tokRingConfiguration	1.3.6.1.4.1.81.13.1.1.1.9	OCTET STRING	read-only	Configuration attribute describing the list of physical addresses detected on the Token Ring. Coded in internal application format.
INT tokRingBeaconing	1.3.6.1.4.1.81.13.1.1.1.10	INTEGER	read-only	This attribute indicates if a beaconing condition is currently detected on the ring.
OCT tokRingBeaconingStation	1.3.6.1.4.1.81.13.1.1.1.11	OCTET STRING	read-only	The MAC address of the last station which was detected as sending Beaconing MAC frames on the ring.
INT tokRingStationsMatch	1.3.6.1.4.1.81.13.1.1.1.12	INTEGER	read-only	This attribute indicates matching between the number of stations detected on the ring between the current agent and the next agent on Up Stream sense and the number of connected lobe ports.Used by the port address correlation mechanism.
INT tokRingTraffic	1.3.6.1.4.1.81.13.1.1.1.13	INTEGER	read-only	Last traffic reading (sampling time = 100 msec). The traffic is expressed in percents of the maximum Ethernet traffic in the range 1..20, expressed on a log(10) scale ( value = 10*log10(percent) ).
INT tokRingSecurityMethod	1.3.6.1.4.1.81.13.1.1.1.14	INTEGER	read-write	Security scheme selected by the user. perPort(1) indicates that secure addresses are defined for each secured token ring port. perRing(2) indicates that a common set of secure addresses will be allowed for the whole ring. disabled(3) - no security method is applied on this ring.
OCT tokRingSecurityPolicy	1.3.6.1.4.1.81.13.1.1.1.15	OCTET STRING	read-write	Security policy (trap only or trap and disconnect) selected for the ring. Coded in internal format.
OCT tokRingSecureAddr	1.3.6.1.4.1.81.13.1.1.1.16	OCTET STRING	read-write	Secure addresses assigned to the ring. Coded in internal format.
OCT tokRingLastViolation	1.3.6.1.4.1.81.13.1.1.1.17	OCTET STRING	read-only	MAC address of a last detected intruder.
INT tokRingUtilization	1.3.6.1.4.1.81.13.1.1.1.18	INTEGER	read-only	Last traffic reading (sampling time = 100 msec). The traffic is expressed in percents of the maximum Token Ring traffic.
INT tokRingPeakUtilization	1.3.6.1.4.1.81.13.1.1.1.19	INTEGER	read-only	Maximal traffic value since last reset of agent. Expressed in percents of the maximum effective TR traffic (token messages are excluded).
INT tokRingBeaconingResolution	1.3.6.1.4.1.81.13.1.1.1.20	INTEGER	read-write	This parameter enables or disables the beaconing resolution.
OCT tokRingThresholdStatus	1.3.6.1.4.1.81.13.1.1.1.21	OCTET STRING	read-only	This item is a bitmap that defines the threshold status of the ring, in relation to the alarmPolicyTable. If the ring is monitored by the agent according to policy number x in the alarmPolicyTable, and the threshold condition has occured, then the bit #x in this item will have the value '1'. Otherwise it will be '0'. For x-186 based agents all bits of this item are '0'.
OCT tokRingActiveMonitor	1.3.6.1.4.1.81.13.1.1.1.22	OCTET STRING	read-only	The MAC Address of the station functioning as Active Monitor.
tokGroup	1.3.6.1.4.1.81.13.2
tokGroupTable	1.3.6.1.4.1.81.13.2.1		not-accessible
tokGroupEntry	1.3.6.1.4.1.81.13.2.1.1		not-accessible
INT tokGroupId	1.3.6.1.4.1.81.13.2.1.1.1	INTEGER	read-only	Number of the slot in which the group is installed.
INT tokGroupAutoRightLoop	1.3.6.1.4.1.81.13.2.1.1.2	INTEGER	read-only	Value ON of this attribute signifies that a hardware loop was automatically created on a Token Ring module which does not sense the existence of another token ring group on the right hand side. In the token ring stackable hub, 'Right' should be read as 'Down'.
INT tokGroupAutoLeftLoop	1.3.6.1.4.1.81.13.2.1.1.3	INTEGER	read-only	Value ON of this attribute signifies that a hardware loop was automatically created on a Token Ring module which does not sense the existence of another token ring group on the left hand side. In the token ring stackable hub, 'Left' should be read as 'Up'.
INT tokGroupManRightLoop	1.3.6.1.4.1.81.13.2.1.1.4	INTEGER	read-write	Setting this attribute to ON signifies a command to the hardware to create a loop on the Token Ring module which isolates the ring from the right hand side. In the token ring stackable hub, 'Right' should be read as 'Down'.
INT tokGroupManLeftLoop	1.3.6.1.4.1.81.13.2.1.1.5	INTEGER	read-write	Setting this attribute to ON signifies a command to the hardware to create a loop on the Token Ring module which isolates the ring from the left hand side. In the token ring stackable hub, 'Left' should be read as 'Up'.
INT tokGroupRightNeighbor	1.3.6.1.4.1.81.13.2.1.1.6	INTEGER	read-only	Attribute defining the existence of a neighbor another token ring group on the right hand side of the module. In the token ring stackable hub, 'Right' should be read as 'Down'.
INT tokGroupLeftNeighbor	1.3.6.1.4.1.81.13.2.1.1.7	INTEGER	read-only	Attribute defining the existence of a neighbor another token ring group on the left hand side of the module. In the token ring stackable hub, 'Left' should be read as 'Up'.
INT tokGroupIOMode	1.3.6.1.4.1.81.13.2.1.1.8	INTEGER	read-write	Attribute defining the I/O mode (single, dual-ring-in, dual-ring-out) Lobe, Internal Repeater or Star) of a module from the the LTR-IO family.
INT tokGroupBridgeMode	1.3.6.1.4.1.81.13.2.1.1.9	INTEGER	read-write	Attribute describing the operational mode of the bridge. For ITLB the following modes are defined: - Mode A: First channel connected to an external ring (RI,RO connectors) and second channel connected to an internal ring; - Mode B: First channel connected to an external ring by a DTE connector and second channel connected to an internal ring; - Mode C: First channel connected to an internal left ring and second channel connected to an internal right ring.
INT tokGroupManLinkLoop	1.3.6.1.4.1.81.13.2.1.1.10	INTEGER	read-write	Setting the value of this attribute to ON instructs the hardware of a Token Ring repeater module to close the loop in the direction of the external connection.
INT tokGroupManBusLoop	1.3.6.1.4.1.81.13.2.1.1.11	INTEGER	read-write	Setting the value of this attribute to ON instructs the hardware of a Token Ring repeater module to close the loop in the direction of the internal bus.
INT tokGroupAutoLinkLoop	1.3.6.1.4.1.81.13.2.1.1.12	INTEGER	read-only	Value ON of this attribute signifies that a hardware loop has been auto- matically closed by the hardwar of the Token Ring repeater as a result of problems on the external link.
INT tokGroupAutoBusLoop	1.3.6.1.4.1.81.13.2.1.1.13	INTEGER	read-only	Value ON of this attribute signifies that a hardware loop has been auto- matically closed by the hardware of the Token Ring repeater as a result of problems on the internal bus.
OID tokGroupSpecificOID	1.3.6.1.4.1.81.13.2.1.1.14	OBJECT IDENTIFIER	read-only	This attribute provides the OID of another group containing additional more specific information regarding this instance.
INT tokGroupStarSpeedDetect	1.3.6.1.4.1.81.13.2.1.1.15	INTEGER	read-write	This attribute enables the speed detection mechanism for the ports which are in star mode
INT tokGroupLobeSpeedDetect	1.3.6.1.4.1.81.13.2.1.1.16	INTEGER	read-write	This attribute enables the speed detection mechanism for all ports which are in Lobe mode, at module level.
INT tokGroupLSTBeaconing	1.3.6.1.4.1.81.13.2.1.1.17	INTEGER	read-only	This item is for LST168 only. The ring is in beaconning state. Value 'on' informs on beacon fault when the number of consecutive beacon frames is above BeaconThreshold.
INT tokGroupLSTBeaconThresh	1.3.6.1.4.1.81.13.2.1.1.18	INTEGER	read-write	This item is for LST168 only.Threshold for the number of consecutive beacon frames in the ring, above which a beaconning fault is alerted.
tokGroupRingTable	1.3.6.1.4.1.81.13.2.2		not-accessible
tokGroupRingEntry	1.3.6.1.4.1.81.13.2.2.1		not-accessible
INT tokGroupRingGroupId	1.3.6.1.4.1.81.13.2.2.1.1	INTEGER	read-only	ID of the group to which the ring belongs.
INT tokGroupRingId	1.3.6.1.4.1.81.13.2.2.1.2	INTEGER	read-only	ID of the ring.
INT tokGroupRingSpeed	1.3.6.1.4.1.81.13.2.2.1.3	INTEGER	read-write	Attribute describing the bandwidth of the ring.
INT tokGroupRingInserted	1.3.6.1.4.1.81.13.2.2.1.4	INTEGER	read-only	Indicates that the bridge interface has inserted itself into the ring.
INT tokGroupRingStatus	1.3.6.1.4.1.81.13.2.2.1.5	INTEGER	read-write	This item sets the connection of a TR controller to one of its possible connections, identified by the index of this row, for modules with a multiple interface controller (for example ITRP).
tokPort	1.3.6.1.4.1.81.13.3
tokPortTable	1.3.6.1.4.1.81.13.3.1		not-accessible
tokPortEntry	1.3.6.1.4.1.81.13.3.1.1		not-accessible
INT tokPortGroupId	1.3.6.1.4.1.81.13.3.1.1.1	INTEGER	read-only	ID of the group to which the token ring port belongs.
INT tokPortId	1.3.6.1.4.1.81.13.3.1.1.2	INTEGER	read-only	ID of the port in the tokPortTable.
INT tokPortBypass	1.3.6.1.4.1.81.13.3.1.1.3	INTEGER	read-write	Setting the value of this attribute to ON causes the by- passing of the TokenRing port.
INT tokPortConnected	1.3.6.1.4.1.81.13.3.1.1.4	INTEGER	read-only	Attribute which describes the connection status of a Token Ring port (inclusion of the Token Ring controller in the ring).
INT tokPortTCP	1.3.6.1.4.1.81.13.3.1.1.5	INTEGER	read-write	Setting the value of this attribute to ON causes the activation of the cable-fault detection mechanism.
INT tokPortCableFault	1.3.6.1.4.1.81.13.3.1.1.6	INTEGER	read-only	Value ON of this attribute signifies the detection of a cable-fault on this specific Token Ring port.
INT tokPortFunctionalStatus	1.3.6.1.4.1.81.13.3.1.1.7	INTEGER	read-only	The value of this attribute reflects the functional status of Token Ring ports. Note that it is not mandatory that a certain port support all the enumerated states. Here is the lest of the possible states: ok(1) - fully functional port, transmitting and receiving packets. rld(2) - receive link down condition on the port. tld(4) - transmit link down condition on the port.
OCT tokPortLastSourceAddr	1.3.6.1.4.1.81.13.3.1.1.8	OCTET STRING	read-only	MAC source address of the last readable frame received by this port.
OID tokPortSpecificOID	1.3.6.1.4.1.81.13.3.1.1.9	OBJECT IDENTIFIER	read-only	This attribute provides the OID of another group containing additional more specific information regarding this instance.
INT tokPortRingSpeedError	1.3.6.1.4.1.81.13.3.1.1.10	INTEGER	read-only	This attribute is set to 'on' when the station tries to enter the ring with a speed different from the speed of the ring.
INT tokPortSpeedDetect	1.3.6.1.4.1.81.13.3.1.1.11	INTEGER	read-write	This attribute enables the speed detection mechanism on a port level.
INT tokPortRingId	1.3.6.1.4.1.81.13.3.1.1.12	INTEGER	read-only	Unique identifier of the ring/ring segment to which a specific port is connected.
INT tokPortMapping	1.3.6.1.4.1.81.13.3.1.1.13	INTEGER	read-write	This attribute enables/disables participation of the selected port in port-to-address correlation algorithm. Default value is on(1).
tokRingStation	1.3.6.1.4.1.81.13.4
tokRingStationTable	1.3.6.1.4.1.81.13.4.1		not-accessible
tokRingStationEntry	1.3.6.1.4.1.81.13.4.1.1		not-accessible
INT tokRingStationRingId	1.3.6.1.4.1.81.13.4.1.1.1	INTEGER	read-only	ID of the ring in the in which the station is inserted.
OCT tokRingStationMAC	1.3.6.1.4.1.81.13.4.1.1.2	OCTET STRING	read-only	This item defines the MAC address (in token ring format) of the station connected to the ring.
CTR tokRingStationLineErrors	1.3.6.1.4.1.81.13.4.1.1.3	Counter	read-only	This counter is incremented when a frame or token is copied or repeated by a station, the E bit is zero in the frame or token and one of the following conditions exists: 1) there is a non-data bit (J or K bit) between the SD and the ED of the frame or token, or 2) there is an FCS error in the frame.
CTR tokRingStationInternalErrors	1.3.6.1.4.1.81.13.4.1.1.4	Counter	read-only	This counter is incremented when a station recognizes an internal error. Internal errors are detected by the adapter's hardware and/or firmware. They usually cause the detecting adapter to remove itself from the ring.
CTR tokRingStationBurstErrors	1.3.6.1.4.1.81.13.4.1.1.5	Counter	read-only	This counter is incremented when a station detects the absence of transitions for five half-bit timers (burst-five error).
CTR tokRingStationACErrors	1.3.6.1.4.1.81.13.4.1.1.6	Counter	read-only	This counter is incremented when a station receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another SMP frame with A is equal to C is equal to 0 without first receiving an AMP frame. It denotes a station that cannot set the AC bits properly.
CTR tokRingStationAbortsTrans	1.3.6.1.4.1.81.13.4.1.1.7	Counter	read-only	This counter is incremented when a station transmits an abort delimiter while transmitting.
CTR tokRingStationLostFrames	1.3.6.1.4.1.81.13.4.1.1.8	Counter	read-only	This counter is incremented when a station is transmitting and its TRR timer expires. This condition denotes a condition where a transmitting station in strip mode does not receive the trailer of the frame before the TRR timer goes off.
CTR tokRingStationReceiveCongErrors	1.3.6.1.4.1.81.13.4.1.1.9	Counter	read-only	This counter is incremented when a station recognizes a frame addressed to its specific address, but has no available buffer space indicating that the station is congested.
CTR tokRingStationFramesCopied	1.3.6.1.4.1.81.13.4.1.1.10	Counter	read-only	This counter is incremented when a station recognizes a frame addressed to its specific address and detects that the FS field A bits are set to 1 indicating a possible line hit or duplicate address.
CTR tokRingStationFrequencyErrors	1.3.6.1.4.1.81.13.4.1.1.11	Counter	read-only	The number of times the interface has detected that the frequency of the incoming signal differs from the expected frequency by more than that specified by the IEEE 802.5 standard.
CTR tokRingStationTokenErrors	1.3.6.1.4.1.81.13.4.1.1.12	Counter	read-only	This counter is incremented when a station acting as the active monitor recognizes an error condition that needs a token transmitted.
CTR tokRingStationTotalErrors	1.3.6.1.4.1.81.13.4.1.1.13	Counter	read-only	This counter is the sum of all REM counters for this station, i.e.: LineErrors, InternalErrors, BurstErrors, ACErrors, AbortsTrans, LostFrames, FrameCopiedErrors, ReceiveCongestionsErrors, FrequencyErrors, TokenErrors.
INT tokRingStationFunctionalType	1.3.6.1.4.1.81.13.4.1.1.14	INTEGER	read-only	The function of the concerned station in the ring.
tokIntPort	1.3.6.1.4.1.81.13.5
tokIntPortTable	1.3.6.1.4.1.81.13.5.1		not-accessible	Table of configuration attributes for items specific to token ring internal ports, which can not be addressed via the genIntPort group.
tokIntPortEntry	1.3.6.1.4.1.81.13.5.1.1		not-accessible	An entry in the table, containing data about a single port.
INT tokIntPortGroupId	1.3.6.1.4.1.81.13.5.1.1.1	INTEGER	read-only	Index which identifies the group inside the hub for which this entry contains information. Equals the number of the slot by which the group containing the internal port is accessed. This value is never greater than chNumberOfSlots.
INT tokIntPortId	1.3.6.1.4.1.81.13.5.1.1.2	INTEGER	read-only	Index which identifies the internal port inside the group for which this entry contains information. This value is never greater than genGroupNumberOfIntPorts of the group to which the port belongs.
INT tokIntPortLeftNeighbor	1.3.6.1.4.1.81.13.5.1.1.3	INTEGER	read-only	Attribute defining the existence of another token ring group to the left hand side of the module, on the TR bus to which this intrnal port is connected. The value bypass is reported when the controller is not connected to the bus.
INT tokIntPortRightNeighbor	1.3.6.1.4.1.81.13.5.1.1.4	INTEGER	read-only	Attribute defining the existence of another token ring group to the left hand side of the module, on the TR bus to which this intrnal port is connected. The value bypass is reported when the controller is not connected to the bus.
INT tokIntPortManLeftLoop	1.3.6.1.4.1.81.13.5.1.1.5	INTEGER	read-write	Setting this attribute to on signifies a command to the hardware to create a loop to the left of the module, on the bus to which this internal port is connected.
INT tokIntPortManRightLoop	1.3.6.1.4.1.81.13.5.1.1.6	INTEGER	read-write	Setting this attribute to on signifies a command to the hardware to create a loop to the left of the module, on the bus to which this internal port is connected.
INT tokIntPortAutoLeftLoop	1.3.6.1.4.1.81.13.5.1.1.7	INTEGER	read-only	Value 'on' of this attribute signifies that a left hardware loop was created on the Token Ring bus to which this internal port is connected.
INT tokIntPortAutoRightLoop	1.3.6.1.4.1.81.13.5.1.1.8	INTEGER	read-only	Value 'on' of this attribute signifies that a right hardware loop was created on the Token Ring bus to which this internal port is connected.
ts	1.3.6.1.4.1.81.14
tsGroup	1.3.6.1.4.1.81.14.1
tsGroupTable	1.3.6.1.4.1.81.14.1.1		not-accessible
tsGroupEntry	1.3.6.1.4.1.81.14.1.1.1		not-accessible
INT tsGroupId	1.3.6.1.4.1.81.14.1.1.1.1	INTEGER	read-only	Number of the slot in which the group is installed.
INT tsGroupLATStatus	1.3.6.1.4.1.81.14.1.1.1.2	INTEGER	read-only	Value ON of this attribute means that LAT protocol is Enabled on the Ethernet module.
INT tsGroupOperationMode	1.3.6.1.4.1.81.14.1.1.1.3	INTEGER	read-only	This attribute describes the operation mode of the module in a multiprocessor configuration sensor, as reported by interprocessors communication.
ltalk	1.3.6.1.4.1.81.15
ltalkPort	1.3.6.1.4.1.81.15.1
ltalkPortTable	1.3.6.1.4.1.81.15.1.1		not-accessible
ltalkPortEntry	1.3.6.1.4.1.81.15.1.1.1		not-accessible
INT ltalkPortGroupId	1.3.6.1.4.1.81.15.1.1.1.1	INTEGER	read-only	Number of the group to which the port belongs.
INT ltalkPortId	1.3.6.1.4.1.81.15.1.1.1.2	INTEGER	read-only	ID of the port in the ltalkPortTable.
INT ltalkPortTest	1.3.6.1.4.1.81.15.1.1.1.3	INTEGER	read-write	A value ON of this attribute indicates that a port test should be performed upon the port defined by the attribute instance.
INT ltalkPortTestResult	1.3.6.1.4.1.81.15.1.1.1.4	INTEGER	read-only	Indicates the result of a port test performed on this port.
INT ltalkPortJam	1.3.6.1.4.1.81.15.1.1.1.5	INTEGER	read-only	An ON value of this attribute indicates a Jam error on the specific port.
cl	1.3.6.1.4.1.81.16
clGroup	1.3.6.1.4.1.81.16.1
clGroupTable	1.3.6.1.4.1.81.16.1.1		not-accessible
clGroupEntry	1.3.6.1.4.1.81.16.1.1.1		not-accessible
INT clGroupId	1.3.6.1.4.1.81.16.1.1.1.1	INTEGER	read-only	Number of the slot in which the group is installed.
INT clGroupClockRedundancy	1.3.6.1.4.1.81.16.1.1.1.2	INTEGER	read-write	Value ON of this attribute defines a redundancy (backup) relationship between the internal and external clocks on the LCL100 module.
INT clGroupMainClock	1.3.6.1.4.1.81.16.1.1.1.3	INTEGER	read-write	Value of this attribute is an index into clPortTable, and defines the clock that should operate or a main clock in redundancy scheme. Serves as 'Clock selection' switch on the card.
INT clGroupTestClocks	1.3.6.1.4.1.81.16.1.1.1.4	INTEGER	read-write	A value ON of this attribute indicates that a test should be performed on all clock ports.
clPort	1.3.6.1.4.1.81.16.2
clPortTable	1.3.6.1.4.1.81.16.2.1		not-accessible
clPortEntry	1.3.6.1.4.1.81.16.2.1.1		not-accessible
INT clPortGroupId	1.3.6.1.4.1.81.16.2.1.1.1	INTEGER	read-only	Number of the group to which the port belongs.
INT clPortId	1.3.6.1.4.1.81.16.2.1.1.2	INTEGER	read-only	ID of the port in the clPortTable.
INT clPortFunctionalStatus	1.3.6.1.4.1.81.16.2.1.1.3	INTEGER	read-only	Indicates whether the clock is faulty or not.
bRouter	1.3.6.1.4.1.81.21
iwb	1.3.6.1.4.1.81.21.1
iwr	1.3.6.1.4.1.81.21.2
iwrGroupTable	1.3.6.1.4.1.81.21.2.1		not-accessible	Attributes pertaining to the integrated router module.
iwrGroupEntry	1.3.6.1.4.1.81.21.2.1.1		not-accessible	An entry in the table.
INT iwrGroupId	1.3.6.1.4.1.81.21.2.1.1.1	INTEGER	read-only	Slot number in which the module is located.
INT iwrOperState	1.3.6.1.4.1.81.21.2.1.1.2	INTEGER	read-only	One of the possible states of the module. run(1) - indicates a successful completion of the boot and self test procedure. boot(2) - indicates that the module is performing the boot and self-test procedure. fail(3) - indicates an unsuccessful completion of the boot and self-test procedure.
INT iwrPMState	1.3.6.1.4.1.81.21.2.1.1.3	INTEGER	read-only	The state of the Processor Module.
INT iwrIOMState	1.3.6.1.4.1.81.21.2.1.1.4	INTEGER	read-only	The state of the Input/Output Module.
INT iwrEthernetMode	1.3.6.1.4.1.81.21.2.1.1.5	INTEGER	read-write	Determines whether the ex10bt(2) LAN controller is connected to the front panel 10BaseT or to backplane bus4(1).
INT iwrPrimaryFDDIInsert	1.3.6.1.4.1.81.21.2.1.1.6	INTEGER	read-only	This variable is specific to the IEFR router and reflect the status of the Primary - P FDDI interfaces of the router. There is a corresponding LED for each one on the front pannel and this information may be used to build a 'real-life' representation of the module's pannel on a management application.
INT iwrSecondaryFDDIInsert	1.3.6.1.4.1.81.21.2.1.1.7	INTEGER	read-only	This variable is specific to the IEFR router and reflect the status of the Secondary - S FDDI interfaces of the router. There is a corresponding LED for each one on the front pannel and this information may be used to build a 'real-life' representation of the module's pannel on a management application.
iwrWANTable	1.3.6.1.4.1.81.21.2.2		not-accessible	WAN data table.
iwrWANEntry	1.3.6.1.4.1.81.21.2.2.1		not-accessible	Entry in the table.
INT iwrWANGroupId	1.3.6.1.4.1.81.21.2.2.1.1	INTEGER	read-only	Slot number in which the module is located.
INT iwrWANPortId	1.3.6.1.4.1.81.21.2.2.1.2	INTEGER	read-only	WAN port index.
INT iwrWANConnection	1.3.6.1.4.1.81.21.2.2.1.3	INTEGER	read-only	WAN connection status.
INT iwrWANPortCableType	1.3.6.1.4.1.81.21.2.2.1.4	INTEGER	read-only	Cable type connected to the specified WAN port.
iwrInterfaceAddrTable	1.3.6.1.4.1.81.21.2.3		not-accessible	The table contain for each interface: 1. The IP address that was configured to the interface. 2. The IP netmask that was configured to the interface. All the network bits are set to 1 and all the hosts bits are set to 0. 3. The Mac Address assigned to the interface.
iwrInterfaceEntry	1.3.6.1.4.1.81.21.2.3.1		not-accessible	Entry in the table.
INT iwrInterfaceGroupId	1.3.6.1.4.1.81.21.2.3.1.1	INTEGER	read-only	Slot number in which the module is located.
INT iwrInterfaceId	1.3.6.1.4.1.81.21.2.3.1.2	INTEGER	read-only	IP Interface port index.
IP iwrInterfaceAddr	1.3.6.1.4.1.81.21.2.3.1.3	IpAddress	read-only	The IP Address of this indexed port.
IP iwrInterfaceMask	1.3.6.1.4.1.81.21.2.3.1.4	IpAddress	read-only	The IP Address Mask of this indexed port.
OCT iwrInterfaceMacAddress	1.3.6.1.4.1.81.21.2.3.1.5	OCTET STRING	read-only	The Mac Address of this indexed interface.
itr	1.3.6.1.4.1.81.21.3
itrGroupTable	1.3.6.1.4.1.81.21.3.1		not-accessible	Table of attributes pertaining to the ITRE module.
itrGroupEntry	1.3.6.1.4.1.81.21.3.1.1		not-accessible	An entry in the table.
INT itrGroupId	1.3.6.1.4.1.81.21.3.1.1.1	INTEGER	read-only	Slot number in which the module is located.
STR itrMainSWVersion	1.3.6.1.4.1.81.21.3.1.1.2	DisplayString	read-only	Software version of the main CPU.
INT itrConfigState	1.3.6.1.4.1.81.21.3.1.1.3	INTEGER	read-only	Configuration state of the module.
INT itrModuleState	1.3.6.1.4.1.81.21.3.1.1.4	INTEGER	read-only	State of the ISTC/IFTC modules.
itrLinkTable	1.3.6.1.4.1.81.21.3.2		not-accessible	ITRE links table.
itrLinkEntry	1.3.6.1.4.1.81.21.3.2.1		not-accessible	Entry in the table.
INT itrLinkGroupId	1.3.6.1.4.1.81.21.3.2.1.1	INTEGER	read-only	Slot number in which the module is located.
INT itrLinkPortId	1.3.6.1.4.1.81.21.3.2.1.2	INTEGER	read-only	Link identifier.
INT itrLinkIf	1.3.6.1.4.1.81.21.3.2.1.3	INTEGER	read-only	Interface type.
INT itrLinkMode	1.3.6.1.4.1.81.21.3.2.1.4	INTEGER	read-write	Synchronous or asynchronous modes on the link.
INT itrLinkAsyncRate	1.3.6.1.4.1.81.21.3.2.1.5	INTEGER	read-write	Possible link speeds that can be set in asynchronous mode.
INT itrLinkSyncRate	1.3.6.1.4.1.81.21.3.2.1.6	INTEGER	read-only	Link speeds in synchronous mode.
INT itrLinkParity	1.3.6.1.4.1.81.21.3.2.1.7	INTEGER	read-write	This attribute enables/disables parity checking.
INT itrLinkParityEvenOdd	1.3.6.1.4.1.81.21.3.2.1.8	INTEGER	read-write	Even or odd parity.
INT itrLinkStopBit	1.3.6.1.4.1.81.21.3.2.1.9	INTEGER	read-write	Number of stop bits (1 or 2 ) in asynchronous mode. The value 'none' is returned in synchronous mode.
INT itrLinkRemoteLANConn	1.3.6.1.4.1.81.21.3.2.1.10	INTEGER	read-only	This attribute shows whether the remote ITRE is connected to the LAN.
INT itrLinkFunctionalStatus	1.3.6.1.4.1.81.21.3.2.1.11	INTEGER	read-only	The attribute represents the status of the WAN link.
INT itrLinkAdminStatus	1.3.6.1.4.1.81.21.3.2.1.12	INTEGER	read-write	The administrative status of the WAN port of the ITRE/IERE family. enabled(1) enables the WAN link, disabled(3) disables it, and enableddOnDemand(2) allows the ITRE/IERE to decide whether to open the port or close it. In this case, it's RO value and the state of the module is reflected in the genPortAdminStatus object.
INT itrLinkReset	1.3.6.1.4.1.81.21.3.2.1.13	INTEGER	read-write	Reset the WAN link
INT itrLinkConnectionStatus	1.3.6.1.4.1.81.21.3.2.1.14	INTEGER	read-only	This attribute represents the end-to-end connection status of the WAN link. When the connection is ok, the link is 'on(1)'. When the connection is lost the link is 'trying(3)'constantly to re-establish the connection until it becomes 'on(1)' or 'off(2)' .
INT itrLinkDataBits	1.3.6.1.4.1.81.21.3.2.1.15	INTEGER	read-write	Number of data bits (7 or 8) in asynchronous mode. The value 'notSupported' is returned in synchronous mode.
INT itrLinkControlSignalsMode	1.3.6.1.4.1.81.21.3.2.1.16	INTEGER	read-write	The value of this attribute determines the control signals (RTS,CTS, CD) mode while working with a MODEM, either in synchronous or asynchronous mode. When the Control Signals Mode is disabled, there is no flow control with the MODEM.
INT itrLinkParityType	1.3.6.1.4.1.81.21.3.2.1.17	INTEGER	read-write	This attribute represents the parity type in asynchronous mode. The value 'none' is returned in synchronous mode.
lntFddiGroup	1.3.6.1.4.1.81.25
lntFddiPort	1.3.6.1.4.1.81.25.1
lntFddiPortTable	1.3.6.1.4.1.81.25.1.1		not-accessible
lntFddiPortEntry	1.3.6.1.4.1.81.25.1.1.1		not-accessible
INT lntFddiPortGroupId	1.3.6.1.4.1.81.25.1.1.1.1	INTEGER	read-only	Id of the slot to which the fddi port belongs.
INT lntFddiPortId	1.3.6.1.4.1.81.25.1.1.1.2	INTEGER	read-only	Id of the port.
INT lntFddiPortMACCurrentPath	1.3.6.1.4.1.81.25.1.1.1.3	INTEGER	read-write	Indicates the association of the MAC with the link path.
INT lntFddiPortOpticalSwitchExist	1.3.6.1.4.1.81.25.1.1.1.4	INTEGER	read-only	This attribute describes the presence of the optical switch and for existing optical switches describes the possibility of the auto-reconfiguration of path resources in the case of power fault.
INT lntFddiPortRingConfiguration	1.3.6.1.4.1.81.25.1.1.1.5	INTEGER	read-only	Attribute which summarizes the status of the fddi link. It is related to the light detection in the physical fiber.
INT lntFddiPortLineStatusA	1.3.6.1.4.1.81.25.1.1.1.6	INTEGER	read-only	Attribute that reflects the status of fddi line, interface a.
INT lntFddiPortLineStatusB	1.3.6.1.4.1.81.25.1.1.1.7	INTEGER	read-only	Attribute that reflects the status of fddi line, interface b.
CTR lntFddiPortRxTotalPackets	1.3.6.1.4.1.81.25.1.1.1.8	Counter	read-only	Number of total packets, including errors, received
CTR lntFddiPortRxTotalOctets	1.3.6.1.4.1.81.25.1.1.1.9	Counter	read-only	Number of total octets, including errors, received
CTR lntFddiPortTxTotalPackets	1.3.6.1.4.1.81.25.1.1.1.10	Counter	read-only	Number of total packets, including errors, transmitted
CTR lntFddiPortTxTotalOctets	1.3.6.1.4.1.81.25.1.1.1.11	Counter	read-only	Number of total octets, including errors, transmitted
INT lntFddiPortIPXtoFDDIMatching	1.3.6.1.4.1.81.25.1.1.1.12	INTEGER	read-write	Conversion matching from IPX to FDDI in Novell environment
INT lntFddiPortFDDItoIPXMatching	1.3.6.1.4.1.81.25.1.1.1.13	INTEGER	read-write	Conversion matching from FDDI to IPX in Novell environment

RFC description

LANNET network modules management MIB covering Ethernet, Token Ring, ATM, and other interface types. Provides configuration and status monitoring for diverse network module types.

Start monitoring Legacy multi-protocol Ethernet/token-ring hub or concentrator chassis with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MODULES-MIB

What Is MODULES-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description