Description: The value of this attribute reflects the functional status of synchronous ports. Note that it is not mandatory that all ports support all the enumerated states. ok(1) - fully functional port, transmitting and receiving packets. rld(2) - receive link down condition on the port - Indicates a cable or connector failure detected by the port H/W. localJabber(3) - fault condition indicating that the port emitted jabber (excessive long transmission) tld(4) - transmit link down condition on the port - Indicates a cable or connector failure detected by the H/W of a port connected to the monitored port. remoteJabber(5) - fault condition indicating that remote jabber was sensed at the port. illSeq(6) - fault condition indicating an illegal synchronization sequence at the port. shortCircuit(7) - short-circuit fault condition detected at the port. partitionOrLocalJabber(8) - one of the partition or local jabber (excessive long transmission) was detected at the port of an optical repeater ) - remoteFaultOrLockLoss(9) - one of optical repeater fault conditions, detected by the port H/W. remoteFault(10) - fault condition, detected by an optical port connected to the monitored port. lockLost(11) - optical port H/W fault.