All MIBs › MODULES-MIB › fethPortFunctionalStatus
fethPortFunctionalStatus
Module: MODULES-MIB
OID (symbolic): MODULES-MIB::fethPortFunctionalStatus
OID (numeric): 1.3.6.1.4.1.81.12.6.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The value of this attribute reflects the functional status of LANNET 100BaseTX port. Here is the set possible states: ok(1)- fully functional port, transmitting and receiving packets. rld(2) - receive link down (Link Test Failure) condition on the port - indicates a broken connection (cable, connector) detected by the port. rxJabber(3) - fault condition indicating that the port received long packet (jabber) from the line. partition(8) - the port is in partition state. remoteFault(10) - fault condition sensed by the remote port. wrong speed(12) - 10Mbit transmission sensed by the port.
What is fethPortFunctionalStatus?
Reports the functional status of this LANNET 100BaseTX port using a feth-specific set of states: rld(2) is a broken cable/connector link-test failure, rxJabber(3) is an oversized incoming frame from the line, partition(8) means the port has been auto-partitioned, remoteFault(10) is a fault sensed by the far-end port, and wrongSpeed(12) flags that the near end is seeing 10Mbit signaling on what should be a 100Mbit link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.12.6.1.1.1.3 snmpwalk -v2c -c public <target> MODULES-MIB::fethPortFunctionalStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.12.6.1.1.1.3.1 snmpget -v2c -c public <target> MODULES-MIB::fethPortFunctionalStatus.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> fethPortFunctionalStatus.1
Start monitoring Legacy multi-protocol Ethernet/token-ring hub or concentrator chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MODULES-MIB::fethPortFunctionalStatus OID value, configure state conditions and alerts, and monitor any Legacy multi-protocol Ethernet/token-ring hub or concentrator chassis from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| 1.3.6.1.4.1.81.12 | eth | LANNET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.12.6 | feth | MODULES-MIB |
| 1.3.6.1.4.1.81.12.6.1 | fethPort | MODULES-MIB |
| 1.3.6.1.4.1.81.12.6.1.1 | fethPortTable | MODULES-MIB |
| 1.3.6.1.4.1.81.12.6.1.1.1 | fethPortEntry | MODULES-MIB |
| 1.3.6.1.4.1.81.12.6.1.1.1.3 | fethPortFunctionalStatus | MODULES-MIB |