All MIBs › MODULES-MIB › tokPortTCP
tokPortTCP
Module: MODULES-MIB
OID (symbolic): MODULES-MIB::tokPortTCP
OID (numeric): 1.3.6.1.4.1.81.13.3.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting the value of this attribute to ON causes the activation of the cable-fault detection mechanism.
What is tokPortTCP?
Enables the cable-fault detection mechanism (test-cable-patch / lobe test) on this port when set to on(1); an admin turns this on so the hardware proactively checks the lobe cable to the attached station for faults before or during operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.13.3.1.1.5 snmpwalk -v2c -c public <target> MODULES-MIB::tokPortTCP
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.13.3.1.1.5.1 snmpget -v2c -c public <target> MODULES-MIB::tokPortTCP.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.81.13.3.1.1.5.1 i <value>
Start monitoring Legacy multi-protocol Ethernet/token-ring hub or concentrator chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MODULES-MIB::tokPortTCP OID value, configure state conditions and alerts, and monitor any Legacy multi-protocol Ethernet/token-ring hub or concentrator chassis from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| 1.3.6.1.4.1.81.13 | tok | LANNET-MIB |
| 1.3.6.1.4.1.81.13.3 | tokPort | LANNET-MIB |
| 1.3.6.1.4.1.81.13.3.1 | tokPortTable | LANNET-MIB |
| 1.3.6.1.4.1.81.13.3.1.1 | tokPortEntry | LANNET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.13.3.1.1.5 | tokPortTCP | MODULES-MIB |